Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file
I received Multicast socket receive error when I tried to restart the weblogic cluster in our pre-prod box.
The error message I received lkie this:
Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file from file:/vol01/sites/vinlkup/site/versionc/local_classes/VIN/DeliveryTypeLookupEJB.jar
Yuping,
What release of WLS w/ service pack are you using? Make sure, if you are using a non-shared file system, to have the same absolute paths to your application on your file systems.
yuping xu wrote:
> I received Multicast socket receive error when I tried to restart the weblogic cluster in our pre-prod box.
> The error message I received lkie this:
> Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file from file:/vol01/sites/vinlkup/site/versionc/local_classes/VIN/DeliveryTypeLookupEJB.jar
Similar Messages
-
Hi,
I need some help.
Product=weblogic5.1.0
Revision=(Release Level)=
Problem Description=
I am doing cluster of weblogic server, I have no problem to set up the
cluster and to run servlet and EJB examples.
However, on my command line for startcluster I got a lot of message as
followed:
Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error opening JAR file from
file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java, Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
The message freshed about every 20 seconds.
Another question, I used a iplanet web server as a proxy server with a
cluster of two weblogic servers pluged in, although I set
weblogic.properties to round-robin, however, when I run a fibonacci servlet,
it does not do the round-robin. It always go to one machine for a lot of
times. Any idea?
Thank you for your help.
Tom
May i presume that your cluster is configured on a shared file system?.
I have seen this problem only if you cluster is configured on different machines
and if the directory structure is not identical.
let us know..
Kumar
Cameron Purdy wrote:
> First, update to SP4 (or SP5 if it is out now). Second, follow the cluster
> instructions on setting up deployments for a cluster. The only
> implementation that I have used is the single shared location that all the
> servers load from.
>
> --
>
> Cameron Purdy
> http://www.tangosol.com
>
> "Tom Gan" <[email protected]> wrote in message
> news:[email protected]...
> > Hi,
> > I need some help.
> >
> > Product=weblogic5.1.0
> > Revision=(Release Level)=
> > Problem Description=
> > I am doing cluster of weblogic server, I have no problem to set up the
> > cluster and to run servlet and EJB examples.
> > However, on my command line for startcluster I got a lot of message as
> > followed:
> > Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket
> receive
> > error: java.lang.RuntimeException: I/O error opening JAR file from
> > file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
> > java.util.zip.ZipException: error in opening zip file
> > at java.util.zip.ZipFile.open(Native Method)
> > at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> > at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> > at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
> > Compiled Code)
> > at
> >
> weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
> > .java, Compiled Code)
> > at
> >
> weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
> > , Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> > jectInputStreamBase.java, Compiled Co
> > de)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> > tStreamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> > eamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
> > StreamBase.java, Compiled Code)
> > at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
> > Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> > jectInputStreamBase.java, Compiled Co
> > de)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> > tStreamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> > eamBase.java, Compiled Code)
> > at
> >
> weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> > treamBase.java, Compiled Code)
> > at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
> > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
> > Code)
> >
> > The message freshed about every 20 seconds.
> >
> > Another question, I used a iplanet web server as a proxy server with a
> > cluster of two weblogic servers pluged in, although I set
> > weblogic.properties to round-robin, however, when I run a fibonacci
> servlet,
> > it does not do the round-robin. It always go to one machine for a lot of
> > times. Any idea?
> > Thank you for your help.
> > Tom
> >
> >
> >
-
Hi,
I need some help.
Product=weblogic5.1.0
Revision=(Release Level)=
Problem Description=
I am doing cluster of weblogic server, I have no problem to set up the
cluster and to run servlet and EJB examples.
However, on my command line for startcluster I got a lot of message as
followed:
Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error ope
ning JAR file from
file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java, Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
The message freshed about every 20 seconds.
Another question, I used a iplanet web server as a proxy server with a
cluster of two weblogic servers pluged in, although I set
weblogic.properties to round-robin, however, when I run a fibonacci servlet,
it does not do the round-robin. It always go to one machine for a lot of
times. Any idea?
Thank you for your help.
TomHi,
I need some help.
Product=weblogic5.1.0
Revision=(Release Level)=
Problem Description=
I am doing cluster of weblogic server, I have no problem to set up the
cluster and to run servlet and EJB examples.
However, on my command line for startcluster I got a lot of message as
followed:
Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error ope
ning JAR file from
file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java, Compiled Code)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled Co
de)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
The message freshed about every 20 seconds.
Another question, I used a iplanet web server as a proxy server with a
cluster of two weblogic servers pluged in, although I set
weblogic.properties to round-robin, however, when I run a fibonacci servlet,
it does not do the round-robin. It always go to one machine for a lot of
times. Any idea?
Thank you for your help.
Tom -
Hello
We have One Admin and 2 Mananged server on same machine.
It is a quad server.
With 2 NICs.
Managed Server is giving this error.
<Jul 22, 2002 10:55:54 AM CDT> <Error> <Cluster> <Multicast socket
receive error
: java.io.InterruptedIOException: Receive timed out
java.io.InterruptedIOException: Receive timed out
at java.net.PlainDatagramSocketImpl.receive(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java
:90)
at java.net.DatagramSocket.receive(DatagramSocket.java:404)
at weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:145)
at weblogic.cluster.MulticastManager.execute(MulticastManager.java:298)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Also on weblogic console
Cluster - > Monitoring - > Monitor Server Participation Panel
shows that both our managed servers are part of the cluster..
But only Sent Frames has data.. Receive frame does not seem to be
working.
I tried MultiCastTest Utility in 2 different dos prompts and seems to
be working. (both windows shows send/receive).
Though i am not sure if it will work for a quad / 2NIC machine..
As utility does not take IP address of the server.
thanks
that is right.
we fixed it.. we tried running multicast test and it failed
so we had to fix our network settings and got multicast working.
also due to multiple NIC card we had to set "interface" address
which we had not done while working with single NIC machines
in clustered mode.
thanks
Kumar Allamraju <[email protected]> wrote in message news:<[email protected]>...
> I have seen this error once when the multicastddress is not properly setup.
> Can you try a different multicastAddress and see if that makes any difference?
>
>
> zevit wrote:
>
> > Hello
> >
> > We have One Admin and 2 Mananged server on same machine.
> > It is a quad server.
> > With 2 NICs.
> >
> > Managed Server is giving this error.
> >
> > <Jul 22, 2002 10:55:54 AM CDT> <Error> <Cluster> <Multicast socket
> > receive error
> > : java.io.InterruptedIOException: Receive timed out
> > java.io.InterruptedIOException: Receive timed out
> > at java.net.PlainDatagramSocketImpl.receive(Native Method)
> > at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java
> > :90)
> > at java.net.DatagramSocket.receive(DatagramSocket.java:404)
> > at weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:145)
> > at weblogic.cluster.MulticastManager.execute(MulticastManager.java:298)
> > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > >
> >
> > Also on weblogic console
> >
> > Cluster - > Monitoring - > Monitor Server Participation Panel
> > shows that both our managed servers are part of the cluster..
> > But only Sent Frames has data.. Receive frame does not seem to be
> > working.
> >
> > I tried MultiCastTest Utility in 2 different dos prompts and seems to
> > be working. (both windows shows send/receive).
> > Though i am not sure if it will work for a quad / 2NIC machine..
> > As utility does not take IP address of the server.
> >
> > thanks
-
Java.lang.RuntimeException : I/O error opening JAR file
Hi,
Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
m/c 2 : d:\weblogic \myserver\*.jar
When servers startup successfully, error is coming :
on the console of m/c 1 :
java.lang.RuntimeException : I/O error opening JAR file from
file:/d:/weblogic/myserver/eb_arn.jar
on the console of m/c 2 :
java.lang.RuntimeException : I/O error opening JAR file from
file:/c:/weblogic/myserver/eb_arn.jar
When both the weblgoic servers are installed on two machines and
on same drive(c:\), this error is not coming.
i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
m/c 2 : c:\weblogic \myserver\*.jar
Regards,
Jitendra Kumar.
Jitendra,
This looks like a bug. Please approach support.
- Prasad
Jitendra Kumar wrote:
> Hi,
>
> I'm deploying as per server property, because all servers have got their own myserver
> directory and jars under that.
> primary key class is not a problem at all, because that file is anyway under serverclasses directory.
>
> The problem starts when two weblogic servers on two m/c are installed on different drive(one on 'C:\' dirve
> and another on 'D:\' drive or a unix machine in cluster).
>
> Regards,
> Jitendra Kumar.
>
> Prasad Peddada <[email protected]> wrote:
> >Are you sure that the the primary key class is there in the jar file.
> >
> >Are you deploying as per cluster property? Deploy on all the servers as per server property.
> >
> >
> >- Prasad
> >
> >Jitendra Kumar wrote:
> >
> >> Hi,
> >>
> >> I don't have any problem in deploying beans and all servers have their local jar files.
> >> Today I started solaris server in cluster and that also giving the same error message in console.
> >> Now 2NT and One Solaris m/c running in cluster.
> >>
> >> error message on NT console is :
> >> **************************************************
> >> Sat Nov 04 15:43:14 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
> >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
> >> <ServerClassLoader><W>: com.cot.eis.vl.eb_voter.VoterPK in not in archive java.util.zip.ZipFile@b902
> >> 66be
> >> java.util.zip.ZipException: error in opening zip file
> >> at java.util.zip.ZipFile.open(Native Method)
> >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
> >> at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java, Compiled Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer.java, Compil
> >> ed Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java, Compiled Co
> >> de)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
> >> amBase.java, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
> >> ava, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
> >> Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInputStreamBase.ja
> >> va, Compiled Code)
> >> at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
> >> amBase.java, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
> >> ava, Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
> >> Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
> >> a, Compiled Code)
> >> at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
> >> Sat Nov 04 15:54:24 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
> >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
> >>
> >> error message on Solaris console is :
> >> ******************************************
> >> java.util.zip.ZipException: error in opening zip file
> >> at java.util.zip.ZipFile.open(Native Method)
> >> at java.util.zip.ZipFile.open(Compiled Code)
> >> at java.util.zip.ZipFile.<init>(Compiled Code)
> >> at java.util.zip.ZipFile.<init>(Compiled Code)
> >> at weblogic.boot.ServerClassLoader.deploy(Compiled Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(Compiled Code)
> >> at weblogic.cluster.AnnotatedServiceOffer.readObject(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
> >> le(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
> >> d Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
> >> led Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
> >> Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
> >> d Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(Compil
> >> ed Code)
> >> at weblogic.cluster.StateDump.readObject(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
> >> le(Compiled Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
> >> d Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
> >> led Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
> >> Code)
> >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
> >> d Code)
> >> at weblogic.cluster.TMSocket.execute(Compiled Code)
> >> at weblogic.kernel.ExecuteThread.run(Compiled Code)
> >> Sat Nov 04 15:55:09 GMT+00:00 2000:<E> <MulticastSocket> Multicast socket receiv
> >> e error: java.lang.RuntimeException: I/O error opening JAR file from file:/C:/we
> >> blogic/myserver/eb_arn.jar
> >>
> >> Regards,
> >> Jitendra Kumar
> >>
> >> Prasad Peddada <[email protected]> wrote:
> >> >Do you trouble deploying the app also.
> >> >
> >> >- Prasad
> >> >
> >> >Jitendra Kumar wrote:
> >> >
> >> >> Hi,
> >> >>
> >> >> Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
> >> >> is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
> >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
> >> >> m/c 2 : d:\weblogic \myserver\*.jar
> >> >> When servers startup successfully, error is coming :
> >> >>
> >> >> on the console of m/c 1 :
> >> >> java.lang.RuntimeException : I/O error opening JAR file from
> >> >> file:/d:/weblogic/myserver/eb_arn.jar
> >> >>
> >> >> on the console of m/c 2 :
> >> >> java.lang.RuntimeException : I/O error opening JAR file from
> >> >> file:/c:/weblogic/myserver/eb_arn.jar
> >> >>
> >> >> When both the weblgoic servers are installed on two machines and
> >> >> on same drive(c:\), this error is not coming.
> >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
> >> >> m/c 2 : c:\weblogic \myserver\*.jar
> >> >>
> >> >> Regards,
> >> >> Jitendra Kumar.
> >> >
> >
> >--
> >Cheers
> >
> >- Prasad
> >
> >
-
I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
starts fine except when I try to deploy a session bean that is marked as
clustered. I get an error about reading a jar file
(D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
created when the server started. Every server is getting this error and I
tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
ideas?
Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:69)
at java.util.zip.ZipFile.<init>(ZipFile.java:84)
at
weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java:74)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java:59)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error
opening JAR file from
file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
From previous posts I see this is a known bug. Is there a fix yet? btw, how
did a bug of this magnitude
get past QA. :(
Elan Halfin <[email protected]> wrote in message
news:[email protected]...
> I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
> starts fine except when I try to deploy a session bean that is marked as
> clustered. I get an error about reading a jar file
> (D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
> created when the server started. Every server is getting this error and I
> tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
> ideas?
>
> Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
> java.util.zip.ZipException: error in opening zip file
> at java.util.zip.ZipFile.open(Native Method)
> at java.util.zip.ZipFile.<init>(ZipFile.java:69)
> at java.util.zip.ZipFile.<init>(ZipFile.java:84)
> at
> weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
> at
>
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
> .java:74)
> at
>
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
> , Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> jectInputStreamBase.java, Compiled
>
> Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> treamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> tStreamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> eamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> treamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
> StreamBase.java, Compiled Code)
> at weblogic.cluster.StateDump.readObject(StateDump.java:59)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> jectInputStreamBase.java, Compiled
>
> Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> treamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> tStreamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> eamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> treamBase.java, Compiled Code)
> at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
> Code)
> Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket
receive
> error: java.lang.RuntimeException: I/O error
>
> opening JAR file from
> file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
>
>
-
Java.lang.UnsatisfiedLinkError: when called from a jar file
I have a class that calls a custom dll file. If I dont package the class files and set my system PATH to the location of the DLL then the VM is able to find the dll and load it successfully.
However, when I package the class files into a jar file, I get "java.lang.UnsatisfiedLinkError: NetworkAdapters" eventhough the system PATH is set to the correct location.
I have also tried to packaging the dll with the class files but this has not made any difference.
Library is called from Java as follows:
static {
System.loadLibrary("NetworkAdapters");
When packaged the classes files exist in the following sub directories com\instem\hci\adapters
Any help appreciated.Is it an executable Jar file?
The the DLL needs to sit in the same folders as the Jar itself.
(works for us). -
Error opening JAR files with double-click
I have this problem while trying to execute a JAR file by double-clicking in Windows Vista Home: the JAR file never opens and it appears the following in the command line:
Exception in thread "main" java.lang.NoClassDefFoundError: C:\PATH_TO_FILE\JAR_FILE_NAME/jar
Caused by: java.lang.ClassNotFoundException: C:\PATH_TO_FILE\JAR_FILE_NAME.jar
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)the strange thing is that I have the environmental variable CLASSPATH set to ".;" and while running from the command line as java -jar C:\PATH_TO_FILE\JAR_FILE_NAME.jar I have no problems...
Any idea?? Thanks in advance!This was getting so frustrating I turned off FileVault and the problem went away. That's too bad, but there it is.
-
XML Form Error: java.lang.RuntimeException: No system found for alias
Hello,
We are currently having an issue with our XML forms. When we try to access our XML forms we receive the following error:
java.lang.RuntimeException: No system found for alias SAP_R3_QWA
Is there a place within the forms to set the system alias?Hi Jereme,
Have you installed the DMS Connector for KM?
I can imagine that this issue is related to an incorrect version of the DMS Connector for KM (regardless of whether you are using the DSMRM or not).
In that case you can do the following to correct the issue:
1) Undeploy your current version of 'DMS Connector for KM'
2) Download the latest version of 'DMS Connector for KM' from Service Marketplace and deploy it to your portal
3) Restart J2EE engine after deployment
Hope this helps,
Robert -
Java.lang.RuntimeException: Error while creating embedded frame
hello,
i know about http://forums.sun.com/thread.jspa?messageID=10273756, but this doens't helped.
i got a
java.lang.RuntimeException: Error while creating embedded frame
at sun.plugin.viewer.WNetscapePluginObject.createFrame(Unknown Source)
at sun.plugin.viewer.WNetscapePluginObject.setWindow(Unknown Source)
when starting a complex Java Applet in Firefox (2 + 3). Then the bowser freezes.
Internet Explorer freezes too, but doesn't left anything in the console.
Simple applets like http://www.java.com/en/download/help/testvm.xml works fine, but i doesn't know the special thing on my applet that keeps it from running.
The best thing about it is ... this happens only on some computers, on most systems the applet works as aspected.
i have no idea, where i should start to search to solve this problem, does anybody have one?
Systems that doesn't work : Win XP; Java Plugin 1.6.0_06
Systems that work : Win XP; all Java PluginsI solved this problem by correcting a typo in the HTML source:
I had a error within the DIV tag containing the applet. In this case a TD tag within this DIV contained some bad characters. Such problems could be avoided by using a HTML validator. -
I am the applications administrator for an instance of Galaxy server. In Galaxy there is an option / plugin to opne a BAM file via the Integrative Genomics Viewer (IGV) created at the Broad Institute. When invoked it downloads a jnlp file and launches IGV and then is supposed to open the BAM file in the viewer. However, when it attempts to open the BAM file I get the following error:
"An Error occurred while loading: http://galaxy/display_application/52cef830ad5766ca/igv_bam/web/29212308ff643a94/data/galaxy_52cef830ad5766ca.bam
java.lang.RuntimeException: Error loading file: http://galaxy/display_application/52cef830ad5766ca/igv_bam/web/29212308ff643a94/data/galaxy_52cef830ad5766ca.bam NULL content-length."UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede. -
IWAB0399E Error in generating Java from WSDL: java.lang.RuntimeException:
Hi,
I did try to create web service client using eclipse. Imported wsdl to eclipse project and tried to create java client but I am getting following exception :
IWAB0399E Error in generating Java from WSDL: java.lang.RuntimeException: Unknown element _value
java.lang.RuntimeException: Unknown element _value
at org.apache.axis.wsdl.toJava.JavaBeanWriter.getBinaryTypeEncoderName(JavaBeanWriter.java:490)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.writeSimpleTypeGetter(JavaBeanWriter.java:928)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.writeAccessMethods(JavaBeanWriter.java:1102)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.writeFileBody(JavaBeanWriter.java:238)
at org.apache.axis.wsdl.toJava.JavaWriter.generate(JavaWriter.java:127)
at org.apache.axis.wsdl.toJava.JavaBeanWriter.generate(JavaBeanWriter.java:1405)
at org.apache.axis.wsdl.toJava.JavaTypeWriter.generate(JavaTypeWriter.java:113)
at org.apache.axis.wsdl.toJava.JavaGeneratorFactory$Writers.generate(JavaGeneratorFactory.java:421)
at org.apache.axis.wsdl.gen.Parser.generateTypes(Parser.java:547)
at org.apache.axis.wsdl.gen.Parser.generate(Parser.java:432)
at org.apache.axis.wsdl.gen.Parser.access$000(Parser.java:45)
at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:362)
at java.lang.Thread.run(Unknown Source)
This works just fine in SoapUI. Also can access this from other clients.
You can access the wsdl fine from http://unit7165.oracleads.com:9008/opptyMgmtOpportunities/OpportunityService?wsdl
Does anybody know why this does not work in Eclipse?
Thanks.Hi Team,
I am too getting same exception when trying to create client side code from wsdl.
Below is what I am using :
wsdl link :
https://fap0607-crm.oracleads.com/mklLeads/SalesleadService?wsdl
Tools I used : Apache Axis 1.4 jars and used command - wsdl2java
I guess, it's a bug already reported here :
https:/issues.apache.org/jira/browse/AXIS-1828
Any pointer to this will help.
Regards,
Sumit -
Hi there
Running Oracle Enterpride Edition 8.1.7
including Oracle Http webserver
I'm trying to run a JSP application developed with Jdeveloper
through th http server
Think I have modified alle the .conf files correctly
I get the message :
"Error Message: java.lang.RuntimeException: JSP Registry could not locate runtime property file:ORDERS_ORDERS_PKG_ORDERS_PKGModule.properties"
Any ideas ?
Or can anyone point me to a (proper) document that decribes (correctly and completely) alle the steps that need to be done ?
Many Thanxs
Regards TJ
nullI am also experiancing this problem. I have updated the ojsp to version 112200 and the properties file exist within the .jar used by the .jsp file.
Exception:
java.lang.RuntimeException: java.lang.RuntimeException: JSP Registry could not locate runtime property file:deseweb_DesewebModule.properties
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.(Compiled Code)
at java.lang.Exception.(Compiled Code)
at java.lang.RuntimeException.(RuntimeException.java:47)
at morenet.jsp.JSPApplicationRegistry.registerApplicationFromProperties(JSPApplicationRegistry.java:199)
at morenet.jsp.MorenetWebBeanImpl.internalInitialize(MorenetWebBeanImpl.java:119)
at oracle.jdeveloper.html.WebBeanImpl.initialize(WebBeanImpl.java:56)
at oracle.jdeveloper.html.DataWebBeanImpl.initialize(DataWebBeanImpl.java:395)
at morenet.jsp.MorenetWebBeanImpl.initialize(MorenetWebBeanImpl.java:62)
at apps.deseweb._index._jspService(_index.java:71)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(Compiled Code)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:314)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code) -
Hi,
I am following the tutorial which is given in Tutorial for Oracle WebCenter Developers.pdf i am at step 3 , i am using document library service in my page. BUt when i am running the page, the page get opens and it shows the following error:
Error 500--Internal Server Error java.lang.RuntimeException: javax.servlet.jsp.el.ELException.
the details of the error are shown below:
java.lang.RuntimeException: javax.servlet.jsp.el.ELException: Encountered "\u2019", expected one of [<INTEGER_LITERAL>, <FLOATING_POINT_LITERAL>, <STRING_LITERAL>, "true", "false", "null", "(", "-", "not", "!", "empty", <IDENTIFIER>]
at oracle.adf.share.el.OracleExpressionEvaluatorImpl.evaluateInternal(OracleExpressionEvaluatorImpl.java:85)
at oracle.adf.share.el.OracleExpressionEvaluatorImpl.evaluate(OracleExpressionEvaluatorImpl.java:51)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator._evaluate(FacesExpressionEvaluator.java:115)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator.evaluate(FacesExpressionEvaluator.java:72)
at oracle.adf.model.binding.DCUtil.elEvaluate(DCUtil.java:788)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1403)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameter(DCBindingContainer.java:1452)
at oracle.adf.model.binding.DCParameter.internalEvaluateExpresion(DCParameter.java:183)
at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:98)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.initializeParams(DCTaskFlowBinding.java:549)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:320)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:281)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:129)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:90)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:116)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3038)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2759)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:112)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:80)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:192)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java:21)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:231)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:267)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:71)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:352)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.jsp.el.ELException: Encountered "\u2019", expected one of [<INTEGER_LITERAL>, <FLOATING_POINT_LITERAL>, <STRING_LITERAL>, "true", "false", "null", "(", "-", "not", "!", "empty", <IDENTIFIER>]
at org.apache.commons.el.ExpressionEvaluatorImpl.parseExpressionString(ExpressionEvaluatorImpl.java:320)
at oracle.jsp.el.OracleExpressionEvaluator.parseExpression(Unknown Source)
at oracle.adf.share.el.OracleExpressionEvaluatorImpl.evaluateInternal(OracleExpressionEvaluatorImpl.java:78)
... 64 more
Kindly suggest me.
Thanks.There may be a problem with the encoding of the single quotes in the connectionName and startFolderPath parameters of the task flow binding. I had the same problem when I copied and pasted the values from the pdf version of the tutorial.
Try this:
Select the "Bindings" tab of "MyPage.jspx".
Double click on "taskFlow - doclibdocumentLibrary1"
Replace the single quotes in the values by re-typing them.
The tutorial uses these values:
${’MyTutorialContent’}
${'/Manuals'} -
Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .
We have basically the same issue when we try to create the interpreter using the embedded method..
I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
Any help would be appreciated I think we will open a support case but even that is more painful...
Any help would be greatly appreciated..
PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
Error we get is
1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path
Maybe you are looking for
-
Compatible with Windows Media Player?
Can you transfer music using Windows Media Player? It's been ages since I last moved music around on my BB8900 - but right now, syncs are not working which means I'm currently having to use Roxio media thingie to convert the .wma files to .mp3s. If I
-
Every time I launch an Office product, Word, Excel, or PowerPoint, I get "Optimizing Font Menu Performance...". I do design work but only have a few fonts available at any one time. This is annoying because it can take up to a minute for one of these
-
Podcast available on iTunes store but not coming in through subscription
My podcast was approved on iTunes and shows up just fine. Unfortunately, I can't get the episode to show up when I subscribe to the podcast. Here's my listing on iTunes http://itunes.apple.com/us/podcast/mmomfg/id501363211 Here's my XML file http://m
-
I'm not exactly sure what happened but for some reason my App Store won't open anymore. Every time I try the message "You can't open the application App Store because it might be damaged or broken" pops up. And for some reason iPhoto is completely mi
-
Okay my cpu got soaked and i have purchased a new one is it possible to take the songs already on my ipod and put them on to my new cpu so my ipod does not lose all the songs i already purchased forever ???