Error opening JAR files with double-click

I have this problem while trying to execute a JAR file by double-clicking in Windows Vista Home: the JAR file never opens and it appears the following in the command line:
Exception in thread "main" java.lang.NoClassDefFoundError: C:\PATH_TO_FILE\JAR_FILE_NAME/jar
Caused by: java.lang.ClassNotFoundException: C:\PATH_TO_FILE\JAR_FILE_NAME.jar
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)the strange thing is that I have the environmental variable CLASSPATH set to ".;" and while running from the command line as java -jar C:\PATH_TO_FILE\JAR_FILE_NAME.jar I have no problems...
Any idea?? Thanks in advance!

This was getting so frustrating I turned off FileVault and the problem went away. That's too bad, but there it is.

Similar Messages

  • My trackpad can't open file with double click

    i don't know what's going on, but my trackpad can't open file with double click. i have to open it with right click, open or open with. i've tried to fix it in the system preferences, it didn't work out well.

    William - you are wonderful!  I had looked at that - they were set to 'internal' which seemed like RH...but selecting the 'design view' and then reselecting 'use default editor' instead of 'auto-select editor' did it.  THANK YOU!!!!!

  • Sublime Text 2 won't open files with double click

    Hi, this is my first time asking for something.
    Well, i've been using Scribes, but sometimes i need tabs in my text editor, so i installed Sublime Text 2.
    The problem is that i can't open files with double click, i need to use "subl filename" and that it's not funny :S
    If i double click a file ST2 opens, but with a tab named "file" and without content.
    Is there a fix for that?
    My Arch installation (if is neccesary):
    Arch x86_64
    Openbox (stand-alone)
    PCManFM
    P.D: sorry for my english D:

    the reason seems to be a broken desktop file.  `/usr/share/applications/sublime-text.desktop` says `Exec=subl %U`, but it should be `%f`. Also the Aur package does not provide a `subl` symlink so you should create one.

  • MulticastSocket Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file from file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar

    Hi,
              I need some help.
              Product=weblogic5.1.0
              Revision=(Release Level)=
              Problem Description=
              I am doing cluster of weblogic server, I have no problem to set up the
              cluster and to run servlet and EJB examples.
              However, on my command line for startcluster I got a lot of message as
              followed:
              Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket receive
              error: java.lang.RuntimeException: I/O error opening JAR file from
              file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
              java.util.zip.ZipException: error in opening zip file
              at java.util.zip.ZipFile.open(Native Method)
              at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
              at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
              at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
              Compiled Code)
              at
              weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
              .java, Compiled Code)
              at
              weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
              , Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              jectInputStreamBase.java, Compiled Co
              de)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              treamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              tStreamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              eamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              treamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
              StreamBase.java, Compiled Code)
              at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
              Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              jectInputStreamBase.java, Compiled Co
              de)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              treamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              tStreamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              eamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              treamBase.java, Compiled Code)
              at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
              Code)
              The message freshed about every 20 seconds.
              Another question, I used a iplanet web server as a proxy server with a
              cluster of two weblogic servers pluged in, although I set
              weblogic.properties to round-robin, however, when I run a fibonacci servlet,
              it does not do the round-robin. It always go to one machine for a lot of
              times. Any idea?
              Thank you for your help.
              Tom
              

    May i presume that your cluster is configured on a shared file system?.
              I have seen this problem only if you cluster is configured on different machines
              and if the directory structure is not identical.
              let us know..
              Kumar
              Cameron Purdy wrote:
              > First, update to SP4 (or SP5 if it is out now). Second, follow the cluster
              > instructions on setting up deployments for a cluster. The only
              > implementation that I have used is the single shared location that all the
              > servers load from.
              >
              > --
              >
              > Cameron Purdy
              > http://www.tangosol.com
              >
              > "Tom Gan" <[email protected]> wrote in message
              > news:[email protected]...
              > > Hi,
              > > I need some help.
              > >
              > > Product=weblogic5.1.0
              > > Revision=(Release Level)=
              > > Problem Description=
              > > I am doing cluster of weblogic server, I have no problem to set up the
              > > cluster and to run servlet and EJB examples.
              > > However, on my command line for startcluster I got a lot of message as
              > > followed:
              > > Fri Aug 18 11:31:44 EDT 2000:<E> <MulticastSocket> Multicast socket
              > receive
              > > error: java.lang.RuntimeException: I/O error opening JAR file from
              > > file:/D:/weblogic/mycluster/server86/tmp_deployments/ejbjar-17327.jar
              > > java.util.zip.ZipException: error in opening zip file
              > > at java.util.zip.ZipFile.open(Native Method)
              > > at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
              > > at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
              > > at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java,
              > > Compiled Code)
              > > at
              > >
              > weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
              > > .java, Compiled Code)
              > > at
              > >
              > weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
              > > , Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              > > jectInputStreamBase.java, Compiled Co
              > > de)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              > > treamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              > > tStreamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              > > eamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              > > treamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
              > > StreamBase.java, Compiled Code)
              > > at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled
              > > Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              > > jectInputStreamBase.java, Compiled Co
              > > de)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              > > treamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              > > tStreamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              > > eamBase.java, Compiled Code)
              > > at
              > >
              > weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              > > treamBase.java, Compiled Code)
              > > at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
              > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
              > > Code)
              > >
              > > The message freshed about every 20 seconds.
              > >
              > > Another question, I used a iplanet web server as a proxy server with a
              > > cluster of two weblogic servers pluged in, although I set
              > > weblogic.properties to round-robin, however, when I run a fibonacci
              > servlet,
              > > it does not do the round-robin. It always go to one machine for a lot of
              > > times. Any idea?
              > > Thank you for your help.
              > > Tom
              > >
              > >
              > >
              

  • Error opening jar file

    I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
              starts fine except when I try to deploy a session bean that is marked as
              clustered. I get an error about reading a jar file
              (D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
              created when the server started. Every server is getting this error and I
              tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
              ideas?
              Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
              java.util.zip.ZipException: error in opening zip file
              at java.util.zip.ZipFile.open(Native Method)
              at java.util.zip.ZipFile.<init>(ZipFile.java:69)
              at java.util.zip.ZipFile.<init>(ZipFile.java:84)
              at
              weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
              at
              weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
              .java:74)
              at
              weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
              , Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              jectInputStreamBase.java, Compiled
              Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              treamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              tStreamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              eamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              treamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
              StreamBase.java, Compiled Code)
              at weblogic.cluster.StateDump.readObject(StateDump.java:59)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              jectInputStreamBase.java, Compiled
              Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              treamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              tStreamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              eamBase.java, Compiled Code)
              at
              weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              treamBase.java, Compiled Code)
              at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
              Code)
              Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket receive
              error: java.lang.RuntimeException: I/O error
              opening JAR file from
              file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
              

    From previous posts I see this is a known bug. Is there a fix yet? btw, how
              did a bug of this magnitude
              get past QA. :(
              Elan Halfin <[email protected]> wrote in message
              news:[email protected]...
              > I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
              > starts fine except when I try to deploy a session bean that is marked as
              > clustered. I get an error about reading a jar file
              > (D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
              > created when the server started. Every server is getting this error and I
              > tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
              > ideas?
              >
              > Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
              > java.util.zip.ZipException: error in opening zip file
              > at java.util.zip.ZipFile.open(Native Method)
              > at java.util.zip.ZipFile.<init>(ZipFile.java:69)
              > at java.util.zip.ZipFile.<init>(ZipFile.java:84)
              > at
              > weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
              > at
              >
              weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
              > .java:74)
              > at
              >
              weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
              > , Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              > jectInputStreamBase.java, Compiled
              >
              > Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              > treamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              > tStreamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              > eamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              > treamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
              > StreamBase.java, Compiled Code)
              > at weblogic.cluster.StateDump.readObject(StateDump.java:59)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
              > jectInputStreamBase.java, Compiled
              >
              > Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
              > treamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
              > tStreamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
              > eamBase.java, Compiled Code)
              > at
              >
              weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
              > treamBase.java, Compiled Code)
              > at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
              > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
              > Code)
              > Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket
              receive
              > error: java.lang.RuntimeException: I/O error
              >
              > opening JAR file from
              > file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
              >
              >
              

  • Open the file by double click

    hi
    I'm writing a program like desktop search engine but � have a problem by opening the searched file. How can I first choose the searched file on screen and also how can I open the file by double click?
    p.s I'm using windows

    gokche wrote:
    hi
    I'm writing a program like desktop search engine but � have a problem by opening the searched file. How can I first choose the searched file on screen and also how can I open the file by double click?Please provide more detail; this isn't very clear. What do you mean by "the searched file"? What do you mean by "choose the searched file on screen"?
    p.s I'm using windowsFortunately, this shouldn't matter.

  • Opening a file WITHOUT double-clicking

    In Windows one can open a file from Explorer either by double-clicking or by hitting the Return/Enter key.
    In Mac OS X I can only open a file by double-clicking it. So far, using the keyboard I can only rename it (when I hit Return), or delete it (if I press Command+Return).
    Is there a keyboard shortcut for opening a file? I am a keyboard person and, sometimes, when I navigate from one folder to another, I would like to open the file without moving my hand to get the mouse.

    It's Command-o, for open, of course. As you discovered, pressing Return is the handy short-cut to high-light the file for renaming.
    Francine
    Francine
    Schwieder

  • Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file

    I received Multicast socket receive error when I tried to restart the weblogic cluster in our pre-prod box.
              The error message I received lkie this:
              Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file from file:/vol01/sites/vinlkup/site/versionc/local_classes/VIN/DeliveryTypeLookupEJB.jar
              

    Yuping,
              What release of WLS w/ service pack are you using? Make sure, if you are using a non-shared file system, to have the same absolute paths to your application on your file systems.
              yuping xu wrote:
              > I received Multicast socket receive error when I tried to restart the weblogic cluster in our pre-prod box.
              > The error message I received lkie this:
              > Multicast socket receive error: java.lang.RuntimeException: I/O error opening JAR file from file:/vol01/sites/vinlkup/site/versionc/local_classes/VIN/DeliveryTypeLookupEJB.jar
              

  • Java.lang.RuntimeException : I/O error opening JAR file

              Hi,
              Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
              is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
              i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
              m/c 2 : d:\weblogic \myserver\*.jar
              When servers startup successfully, error is coming :
              on the console of m/c 1 :
              java.lang.RuntimeException : I/O error opening JAR file from
              file:/d:/weblogic/myserver/eb_arn.jar
              on the console of m/c 2 :
              java.lang.RuntimeException : I/O error opening JAR file from
              file:/c:/weblogic/myserver/eb_arn.jar
              When both the weblgoic servers are installed on two machines and
              on same drive(c:\), this error is not coming.
              i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
              m/c 2 : c:\weblogic \myserver\*.jar
              Regards,
              Jitendra Kumar.
              

    Jitendra,
              This looks like a bug. Please approach support.
              - Prasad
              Jitendra Kumar wrote:
              > Hi,
              >
              > I'm deploying as per server property, because all servers have got their own myserver
              > directory and jars under that.
              > primary key class is not a problem at all, because that file is anyway under serverclasses directory.
              >
              > The problem starts when two weblogic servers on two m/c are installed on different drive(one on 'C:\' dirve
              > and another on 'D:\' drive or a unix machine in cluster).
              >
              > Regards,
              > Jitendra Kumar.
              >
              > Prasad Peddada <[email protected]> wrote:
              > >Are you sure that the the primary key class is there in the jar file.
              > >
              > >Are you deploying as per cluster property? Deploy on all the servers as per server property.
              > >
              > >
              > >- Prasad
              > >
              > >Jitendra Kumar wrote:
              > >
              > >> Hi,
              > >>
              > >> I don't have any problem in deploying beans and all servers have their local jar files.
              > >> Today I started solaris server in cluster and that also giving the same error message in console.
              > >> Now 2NT and One Solaris m/c running in cluster.
              > >>
              > >> error message on NT console is :
              > >> **************************************************
              > >> Sat Nov 04 15:43:14 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
              > >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
              > >> <ServerClassLoader><W>: com.cot.eis.vl.eb_voter.VoterPK in not in archive java.util.zip.ZipFile@b902
              > >> 66be
              > >> java.util.zip.ZipException: error in opening zip file
              > >> at java.util.zip.ZipFile.open(Native Method)
              > >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
              > >> at java.util.zip.ZipFile.<init>(ZipFile.java, Compiled Code)
              > >> at weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java, Compiled Code)
              > >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer.java, Compil
              > >> ed Code)
              > >> at weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java, Compiled Co
              > >> de)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
              > >> amBase.java, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
              > >> a, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
              > >> ava, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
              > >> Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
              > >> a, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInputStreamBase.ja
              > >> va, Compiled Code)
              > >> at weblogic.cluster.StateDump.readObject(StateDump.java, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLObjectInputStre
              > >> amBase.java, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputStreamBase.jav
              > >> a, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInputStreamBase.j
              > >> ava, Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStreamBase.java,
              > >> Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputStreamBase.jav
              > >> a, Compiled Code)
              > >> at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
              > >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
              > >> Sat Nov 04 15:54:24 GMT+05:30 2000:<E> <MulticastSocket> Multicast socket receive error: java.lang.R
              > >> untimeException: I/O error opening JAR file from file:/mazaa/weblogic/weblogic/myserver/voter.jar
              > >>
              > >> error message on Solaris console is :
              > >> ******************************************
              > >> java.util.zip.ZipException: error in opening zip file
              > >> at java.util.zip.ZipFile.open(Native Method)
              > >> at java.util.zip.ZipFile.open(Compiled Code)
              > >> at java.util.zip.ZipFile.<init>(Compiled Code)
              > >> at java.util.zip.ZipFile.<init>(Compiled Code)
              > >> at weblogic.boot.ServerClassLoader.deploy(Compiled Code)
              > >> at weblogic.cluster.AnnotatedServiceOffer.expandClassPath(Compiled Code)
              > >> at weblogic.cluster.AnnotatedServiceOffer.readObject(Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
              > >> le(Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
              > >> d Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
              > >> led Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
              > >> Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
              > >> d Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readArrayList(Compil
              > >> ed Code)
              > >> at weblogic.cluster.StateDump.readObject(Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializab
              > >> le(Compiled Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compile
              > >> d Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compi
              > >> led Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
              > >> Code)
              > >> at weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compile
              > >> d Code)
              > >> at weblogic.cluster.TMSocket.execute(Compiled Code)
              > >> at weblogic.kernel.ExecuteThread.run(Compiled Code)
              > >> Sat Nov 04 15:55:09 GMT+00:00 2000:<E> <MulticastSocket> Multicast socket receiv
              > >> e error: java.lang.RuntimeException: I/O error opening JAR file from file:/C:/we
              > >> blogic/myserver/eb_arn.jar
              > >>
              > >> Regards,
              > >> Jitendra Kumar
              > >>
              > >> Prasad Peddada <[email protected]> wrote:
              > >> >Do you trouble deploying the app also.
              > >> >
              > >> >- Prasad
              > >> >
              > >> >Jitendra Kumar wrote:
              > >> >
              > >> >> Hi,
              > >> >>
              > >> >> Cluster configuration : 2 NT boxes WLS5.1(SP6). On one m/c weblogic
              > >> >> is installed on drive C:\ and on another m/c weblogic is installed on drive D:\.
              > >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
              > >> >> m/c 2 : d:\weblogic \myserver\*.jar
              > >> >> When servers startup successfully, error is coming :
              > >> >>
              > >> >> on the console of m/c 1 :
              > >> >> java.lang.RuntimeException : I/O error opening JAR file from
              > >> >> file:/d:/weblogic/myserver/eb_arn.jar
              > >> >>
              > >> >> on the console of m/c 2 :
              > >> >> java.lang.RuntimeException : I/O error opening JAR file from
              > >> >> file:/c:/weblogic/myserver/eb_arn.jar
              > >> >>
              > >> >> When both the weblgoic servers are installed on two machines and
              > >> >> on same drive(c:\), this error is not coming.
              > >> >> i.e. all jars are at two place m/c 1 : c:\weblogic\myserver\*.jar
              > >> >> m/c 2 : c:\weblogic \myserver\*.jar
              > >> >>
              > >> >> Regards,
              > >> >> Jitendra Kumar.
              > >> >
              > >
              > >--
              > >Cheers
              > >
              > >- Prasad
              > >
              > >
              

  • Why can't I open files with double click, etc?

    Hello, all,
    I have been having problems with my MacBook (Aluminum late 2008, I think, OS 10.5). It runs slowly; files on the desktop and in my "Macintosh HD" often won't open with double-click but have to be opened with File-->Open; there are Word Work Files that won't go away; the trackpad is often stiff and not very responsive; clicking on the mouse is very stiff, despite very easy settings. In short, a lot of things are sluggish. Sometimes, also, I get the spinning beach ball, but not all the time.
    I have run disk permissons repair from Disk Utility many times (both from the desktop and from the MacBook install disk); I have replaced the directory with Disk Warrior at least twice; I have verified that the disk is OK; I have zapped the PRAM; and done other things of that kind.
    I took the MacBook to an Apple Store yesterday. It had been unplugged and much to my surprise, most everything seemed to be working all right. When I opened it today, however, I found everything as it was before I took it to Apple. Including the Word Work files, which I thought were gone.
    If I recall correctly, this started when I was working on a long editing project in Word, but I don't know whether that has anything to do with what has happened. I've done similarly long projects before, and this never happened.
    I could try trashing the Word Work files (there seem also to be quite a lot of folders with "recovered" files), but I don't want to do that unless I can be assured that nothing bad will come from doing that.
    I know this seems quite comprehensive, and may involve several issues, but I'm really unhappy about this and would love to think there is something more I can do, apart from returning to the Apple Store. Besides everything else, how can I khow that I won't find, again, that the MacBook will work fine there but goes back to its troubled state when I return?
    Clues, anyone?
    Thanks,
    jenny

    Hi, Mike,
    I have 211.59 left out of total HD space of 232.57.Space should not be a problem. I'll try using Activity  Monitor today. I have 2 GB of memory. But since this is the first time I[ve had this problem, I don't see how it could be a problem with memory, do you?
    I finished the project more than a week ago. After I shut down the computer, it temporarily returned to normal but subsewuently started acting odd again, although I've done nothing but email since I turned it on again.
    I am going to try getting rid of the Word Work files and see whether that helps. I am wondering whether the book I was working on had something wrong with it (it was written in NeoOffice but opened in Word), or my copy of Word has gotten corrupted. Although I haven't used Word since I finished with the book.
    Sorry this font is so tiny, but although I was able to choose my font in my original message, there doesnt' seem to be a place to do that here. At least, I don't see it.
    I'll get back to you on the Activity Monitor. Thanks.
    jenny

  • Mouse failing to open folders and files with double click.

    Mouse suddenly decided not to open anything with double click. It will highlight with single click but will not open files. Could I have a broken mouse? Could a virus be causing this? I have checked the mouse settings under System preferences and made sure my pc-using children have not set the mouse to second-click status. Any ideas?

    Check back in system preferences > mouse > Double-click speed.  Move the slider to the slower end of the scale.
    Regards

  • Can't Open Files with Double Click??

    HI
    I am on 10.8.3 Mountain Lion and when using the trackpad or my wireless bluetooth mouse, I cannot open files by double clicking all of a sudden.  This is a serious problem as I cannot view my video files in Final Cut Pro.   There is no click speed preference in System Preferences and I have no idea what to do.  I don't want to have to right click to open any file on my Mac.  Does anybody have a solution for this?  Thanks

    I solved the problem.  If you go to System Preferences > Accessibility > Mouse and Trackpad -  You can set the speed of the double click to be much slower.   Hope this helps someone else with a similar problem.

  • Opening files with double-click and FileVault

    I'm experiencing an issue with 10.7.2 and something is telling me it's related to FileVault. When opening a .txt or .numbers file the associated application (TextEdit or Numbers) will open and display the document. But the pointer turns to the spinning disk and the application won't accept any clicks or keyboard shortcuts. If I alt+tab away from the application I cannot alt+tab or click the Dock icon to return to the application. After a few moments I have to Force Quit the application from the dock. I can also use kill-9 <PID> in Terminal to stop the process.
    This *never* happened before 10.7.2. TextEdit will, about 20% of the time, recover after 1.5 - 2.0 minutes of me just leaving it alone.
    This happens on *every* file I double-click for these applications. If I open the file from within the application (File | Open) it's fine, so I don't think this is a corrupt file problem.
    I open most applications by selecting the desired document from Spotlight (command+space <filename>) - this has the same effect as double-clicking the file with the mouse.
    Can this be related to FileVault? I'm open to coincidences, but because I've used 10.7 the same way (double-click or, more often, Spotlight) when opening files and haven't seen this until I started using FileVault I'm leaning towards that.
    I've not made any modifications to the OS - there are no auto-load programs and I've installed ony about five applications that didn't ship with OS X 10.7.
    Anyone else seen this issue?

    This was getting so frustrating I turned off FileVault and the problem went away. That's too bad, but there it is.

  • Adobe X: Can't open multiple files by double-clicking

    I have Adobe Reader version 10.1.0.534 running on Windows XP SP3. Once I have a .pdf file open, I cannot open additional .pdf files by double-clicking on their icon from within a folder or on my Desktop. I can only open them by going through the File>Open dialog in Reader or by dragging the icon onto the open Reader window. I can open the first .pdf file by double-clicking, just not any after that. This behavior is new in Adobe X.
    Does anyone else see this?
    Is this by design? If so, why? It seems to be an unneccessary annoyance and a deprecation.
    Thanks

    Hi Valerie,
    What happens if you try to open the same files after launching Acrobat, by choosing File > Open?
    Has anything changed since on your system since you were able to open Acrobat/PDF files by double-clicking?
    For starters, please try repairing the Acrobat installation by choosing Help > Repair Acrobat Installation.
    Please let us know how it goes.
    Best,
    Sara

  • Can't open PDF files by double-clicking

    really frustrating  - PDF files won't open, nothing happens when I double click my files. Need help to solve this problem shortly.
    I use ACROBAT  XI PRO / WINDOWS 8
    Thanks so much for your prompt consideration
    Val

    Hi Valerie,
    What happens if you try to open the same files after launching Acrobat, by choosing File > Open?
    Has anything changed since on your system since you were able to open Acrobat/PDF files by double-clicking?
    For starters, please try repairing the Acrobat installation by choosing Help > Repair Acrobat Installation.
    Please let us know how it goes.
    Best,
    Sara

Maybe you are looking for

  • Help on Events in SAP ISU(Tcode : FQEVENTS)

    Hi, I am not aware of events(tcode-FQEVENTS). Could you let me know throw a light or some information or document on the events so that i can have an idea of what are events and their implementation Regards Shiva

  • How to Access UNIX scripts using Java

    folks, Is there any way we can access UNIX scripts or CRON Jobs in java, I am planning to come up with some monitoring tool for our application and in these i need to monitor the UNIX scripts whether its running or not , Let me know if any of you guy

  • For some reason I don't have my cellphone number anymore

    Hello! I used to have my old cellphone number on my iPod and now I only have my email for imessage and now my friends can't text me first And I don't know what and I don't know how to change it:( what do i do?!

  • Open dialog with a specific path with an html panel.

    Hi everyone, I 'm trying to rewrite my extension Edge FX available on Adobe Add-ons because flash panelsmade with configurator will not work anymore in Photoshop CC (2014). I need some help with javascript : I don't know why the open dialog didn't di

  • IPhone 5s: Intermittent wifi; wifi signal is full but phone not connected to internet

    Hi all, I have a strange wifi connectivity problem. At home: iPhone 5s connects normally to wifi, but after several minutes of usage (particularly browsing the internet), wifi signal remains full but safari states that phone is not connected to inter