Multipath -ll command doesn't give any output

Hi all,
I am new to configure storage in multipath. I have configured multipath in a newly installed oracle Linux 6.0 following Linux documentation; however, when I tried to list the multipath using the commands, it doesn’t show any output. I have stop and restart services, reboot the server to no fix. I have also check the LUNs that I can see the storage array's FC target ports from the server as well as the storage admin confirm that they are properly connected. Blew is the output when I used the commands. Please help and let me know if you need more info...
root@server1 ~]# multipath -ll
[root@server1 ~]# <-- no output
[root@server1 ~]# ps -ef |grep multipath
root 2563 2437 0 16:10 pts/0 00:00:00 grep multipath
root 20831 1 0 Jan09 ? 00:00:01 /sbin/multipathd
[root@server1 ~]# multipath -d
create: mpatha (3600508b10010414d5155594e56360008) undef HP,LOGICAL VOLUME
size=137G features='0' hwhandler='0' wp=undef
`-+- policy='round-robin 0' prio=1 status=undef
`- 0:0:0:0 cciss!c0d0 104:0 undef ready running
thank you,
Lou

Hi All,
Here is the output that you have requested… thank you for the help
Lou
reply to: Dude
Q: What device names are you expecting to see?
A: Simmilar to the below output:
[root@oldServer ~]# multipath -ll
ocr_vote_1 (36001438005decdd10006e00003b30000) dm-0 HP,HSV450
size=1.0G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| |- 0:0:0:3 sdc 8:32 active ready running
| |- 0:0:1:3 sdq 65:0 active ready running
| |- 1:0:0:3 sdbg 67:160 active ready running
| `- 1:0:1:3 sdbu 68:128 active ready running
Reply to: Billy Verreynne
Here is the output. I didn't post the repetitive output for the 'sd*'s
[root@server1 ~]# multipath -v3
Jan 14 10:23:24 | ram0: device node name blacklisted
Jan 14 10:23:24 | ram1: device node name blacklisted
Jan 14 10:23:24 | ram2: device node name blacklisted
Jan 14 10:23:24 | ram3: device node name blacklisted
Jan 14 10:23:24 | ram4: device node name blacklisted
Jan 14 10:23:24 | ram5: device node name blacklisted
Jan 14 10:23:24 | ram6: device node name blacklisted
Jan 14 10:23:24 | ram7: device node name blacklisted
Jan 14 10:23:24 | ram8: device node name blacklisted
Jan 14 10:23:24 | ram9: device node name blacklisted
Jan 14 10:23:24 | ram10: device node name blacklisted
Jan 14 10:23:24 | ram11: device node name blacklisted
Jan 14 10:23:24 | ram12: device node name blacklisted
Jan 14 10:23:24 | ram13: device node name blacklisted
Jan 14 10:23:24 | ram14: device node name blacklisted
Jan 14 10:23:24 | ram15: device node name blacklisted
Jan 14 10:23:24 | loop0: device node name blacklisted
Jan 14 10:23:24 | loop1: device node name blacklisted
Jan 14 10:23:24 | loop2: device node name blacklisted
Jan 14 10:23:24 | loop3: device node name blacklisted
Jan 14 10:23:24 | loop4: device node name blacklisted
Jan 14 10:23:24 | loop5: device node name blacklisted
Jan 14 10:23:24 | loop6: device node name blacklisted
Jan 14 10:23:24 | loop7: device node name blacklisted
Jan 14 10:23:24 | cciss!c0d0: not found in pathvec
Jan 14 10:23:24 | cciss!c0d0: mask = 0x1f
Jan 14 10:23:24 | cciss!c0d0: dev_t = 104:0
Jan 14 10:23:24 | cciss!c0d0: size = 286677120
Jan 14 10:23:24 | cciss!c0d0: subsystem = cciss
Jan 14 10:23:24 | cciss!c0d0: h:b:t:l = 0:0:0:0
Jan 14 10:23:24 | cciss!c0d0: vendor = HP
Jan 14 10:23:24 | cciss!c0d0: product = LOGICAL VOLUME
Jan 14 10:23:24 | cciss!c0d0: revision = 1.86
Jan 14 10:23:24 | cciss!c0d0: get_state
Jan 14 10:23:24 | loading /lib64/multipath/libchecktur.so checker
Jan 14 10:23:24 | cciss!c0d0: path checker = tur (controller setting)
Jan 14 10:23:24 | cciss!c0d0: checker timeout = 300000 ms (internal default)
Jan 14 10:23:24 | cciss!c0d0: state = 3
Jan 14 10:23:24 | cciss!c0d0: getuid = /lib/udev/scsi_id whitelisted device=/dev/%n (controller setting)
Jan 14 10:23:24 | cciss!c0d0: uid = 3600508b10010414d5155594e56360008 (callout)
Jan 14 10:23:24 | cciss!c0d0: prio = const (controller setting)
Jan 14 10:23:24 | cciss!c0d0: const prio = 1
Jan 14 10:23:24 | sda: not found in pathvec
Jan 14 10:23:24 | sda: mask = 0x1f
Jan 14 10:23:24 | sda: dev_t = 8:0
Jan 14 10:23:24 | sda: size = 104857600
Jan 14 10:23:24 | sda: subsystem = scsi
Jan 14 10:23:24 | sda: vendor = HP
Jan 14 10:23:24 | sda: product = HSV450
Jan 14 10:23:24 | sda: rev = 0953
Jan 14 10:23:24 | sda: h:b:t:l = 0:0:0:1
Jan 14 10:23:24 | sda: tgt_node_name = 0x50001fe1501ec830
Jan 14 10:23:24 | sda: serial = PAFURC19SYZ0AB
Jan 14 10:23:24 | sda: get_state
Jan 14 10:23:24 | sda: path checker = tur (controller setting)
Jan 14 10:23:24 | sda: checker timeout = 30000 ms (sysfs setting)
Jan 14 10:23:24 | sda: state = running
Jan 14 10:23:24 | sda: state = 3
Jan 14 10:23:24 | sda: getuid = /sbin/scsi_id -g -u -s /block/%n (controller setting)
Jan 14 10:23:24 | /sbin/scsi_id exitted with 1
Jan 14 10:23:24 | error calling out /sbin/scsi_id -g -u -s /block/sda
Jan 14 10:23:24 | sda: state = running
Jan 14 10:23:24 | /sbin/scsi_id exitted with 1
Jan 14 10:23:24 | error calling out /sbin/scsi_id -g -u -s /block/sda
Jan 14 10:23:24 | loading /lib64/multipath/libprioalua.so prioritizer
Jan 14 10:23:24 | sda: prio = alua (controller setting)
Jan 14 10:23:24 | reported target port group is 2
Jan 14 10:23:24 | aas = 01 [active/non-optimized]
Jan 14 10:23:24 | sda: alua prio = 10
Jan 14 10:23:24 | sdb: not found in pathvec
Jan 14 10:23:24 | sdb: mask = 0x1f
Jan 14 10:23:24 | sdb: dev_t = 8:16
Jan 14 10:23:24 | sdb: size = 209715200
Jan 14 10:23:24 | sdb: subsystem = scsi
Jan 14 10:23:24 | sdb: vendor = HP
Jan 14 10:23:26 | sdav: not found in pathvec
Jan 14 10:23:26 | sdav: mask = 0x1f
Jan 14 10:23:26 | sdav: dev_t = 66:240
Jan 14 10:23:26 | sdav: size = 2097152
Jan 14 10:23:26 | sdav: subsystem = scsi
Jan 14 10:23:26 | sdav: vendor = HP
Jan 14 10:23:26 | sdav: product = HSV450
Jan 14 10:23:26 | sdav: rev = 0953
Jan 14 10:23:26 | sdav: h:b:t:l = 1:0:3:6
Jan 14 10:23:26 | sdav: tgt_node_name = 0x50001fe1501ec830
Jan 14 10:23:26 | sdav: serial = PAFURC19SYZ0AB
Jan 14 10:23:26 | sdav: get_state
Jan 14 10:23:26 | sdav: path checker = tur (controller setting)
Jan 14 10:23:26 | sdav: checker timeout = 30000 ms (sysfs setting)
Jan 14 10:23:26 | sdav: state = running
Jan 14 10:23:26 | sdav: state = 3
Jan 14 10:23:26 | sdav: getuid = /sbin/scsi_id -g -u -s /block/%n (controller setting)
Jan 14 10:23:26 | /sbin/scsi_id exitted with 1
Jan 14 10:23:26 | error calling out /sbin/scsi_id -g -u -s /block/sdav
Jan 14 10:23:26 | sdav: state = running
Jan 14 10:23:26 | /sbin/scsi_id exitted with 1
Jan 14 10:23:26 | error calling out /sbin/scsi_id -g -u -s /block/sdav
Jan 14 10:23:26 | sdav: prio = alua (controller setting)
Jan 14 10:23:26 | reported target port group is 2
Jan 14 10:23:26 | aas = 01 [active/non-optimized]
Jan 14 10:23:26 | sdav: alua prio = 10
===== paths list =====
uuid hcil dev dev_t pri dm_st chk_st v
3600508b10010414d5155594e56360008 0:0:0:0 cciss!c0d0 104:0 1 undef ready H
0:0:0:1 sda 8:0 10 undef ready H
0:0:0:2 sdb 8:16 50 undef ready H
0:0:0:3 sdc 8:32 10 undef ready H
0:0:0:4 sdd 8:48 10 undef ready H
0:0:0:5 sde 8:64 50 undef ready H
0:0:0:6 sdf 8:80 10 undef ready H
Jan 14 10:23:26 | Found matching wwid [3600508b10010414d5155594e56360008] in bindings file. Setting alias to mpatha
Jan 14 10:23:26 | cciss!c0d0: ownership set to mpatha
Jan 14 10:23:26 | cciss!c0d0: not found in pathvec
Jan 14 10:23:26 | cciss!c0d0: mask = 0xc
Jan 14 10:23:26 | cciss!c0d0: get_state
Jan 14 10:23:26 | cciss!c0d0: state = 3
Jan 14 10:23:26 | cciss!c0d0: const prio = 1
Jan 14 10:23:26 | mpatha: pgfailback = -2 (config file default)
Jan 14 10:23:26 | mpatha: pgpolicy = multibus (controller setting)
Jan 14 10:23:26 | mpatha: selector = round-robin 0 (controller setting)
Jan 14 10:23:26 | mpatha: features = 0 (controller setting)
Jan 14 10:23:26 | mpatha: hwhandler = 0 (controller setting)
Jan 14 10:23:26 | mpatha: rr_weight = 1 (controller setting)
Jan 14 10:23:26 | mpatha: minio = 1 rq (controller setting)
Jan 14 10:23:26 | mpatha: no_path_retry = 12 (controller setting)
Jan 14 10:23:26 | pg_timeout = NONE (internal default)
Jan 14 10:23:26 | mpatha: set ACT_CREATE (map does not exist)
Jan 14 10:23:26 | mpatha: domap (0) failure for create/reload map
Jan 14 10:23:26 | mpatha: ignoring map
reply for: Theanswriz42:
Here is part of the output from the scipt...
sdaa 36001438005decdd10006e000051c0000
sdab 36001438005decdd10006e000052c0000
sdz 36001438005decdd10006e00005200000

Similar Messages

  • HP probook 6450b running windows 8 display port to HDMI doesn't give any output

    Hi,
    My laptop HP probook 6450b running windows 8, display port to HDMI doesn't give any output. I gave windows+P and tried selecting duplicate/extend but no output. I even tried to change the DP to HDMI converter and the HDMI cable as well but no luck. Any help would be much appreciated.

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are using the Display Port on the Notebook get HDMI Ouput for better Audio and Video
    We will surely assist you with this issue
    Firstly I would like to keep you informed that the Display Port supports resolutions up to 2560 x 1600, 30-bit color depth at 60 Hz, and full HD (1920 x 1080) monitors, 24-bit color depth at 120 Hz
    NOTE: Resolutions are dependent upon monitor capability, and resolution and color depth settings.
    Please use an HP DisplayPort to HDMI Adapter for this setup. Please make sure that you are using HP Cable/Converter with the Product Number BP937AA.
    1. Please let me know if you have additional graphics card installed on your Notebook
    2. You can try download and installing the latest BIOS Update for your Notebook from the HP Website
    3. Make sure VGA Port on the Notebook is not in use when you are testing the Display Port
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Send Seperate Remittance Advices doesn't generate any output

    Hello,
    In the payment process profile in the reporting tab I have given the Format "Separate Remittance Advice" and choosed the option to "Automatically Submit at Payment Completion Point"
    Once the Format Payment Instruction is completed this one is submitted. Format Payment Instruction has the output and " Send Seperate Remittance Advices" doesn't have any output generated.
    Should I have to do any additional setup for the same?
    I'm working on R12.
    Thanks
    GM

    I found the following:
    https://bugs.archlinux.org/task/7021?opened=834&status[0]=
    It's not very clear to me if this is an Arch or Thunar or Exo bug, anyway installing 'perl-uri' works for me.
    Marking as SOLVED

  • Tabsontop console command doesn't work any more since v29.0.1

    I used to be able to put the tabs on the bottom where they belong using the console, and now this command doesn't do anything. I don't want to use Chrome, I want to use Firefox, just make it a default option instead of making me root around in console settings that don't even work any more.

    You do not need to install the Stylish extension to be able to do this.
    You can easily create a chrome folder in the Firefox profile folder and a userChrome.css file in this folder with the code.
    Note that you may need a higher number (CTR uses #TabsToolbar {-moz-box-ordinal-group: 100} and Tab on Bottom uses: #TabsToolbar {-moz-box-ordinal-group: 10000 !important;}) as there may still be toolbars around that use a higher value for this property.
    See also:
    *[[/questions/996959]]
    *[[/questions/997335]]
    Add code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #TabsToolbar {-moz-box-ordinal-group: 10000 !important;}
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

  • Reader doesn't print any document & doesn't give any error.

    I've problem with Reader on my Windows7 PC.
    Every document that i try to print directly from Reader doesn't arrive to printer, & i doesn't have any error from software.
    but form all other softwares i can print, also from mail program i can print PDF.
    I've try to reinstall Reader but i have same problem.

    Hi David,
    When you click on print option and you get print dialog box to choose options. Take screen shot and attach while you reply.
    How is your printer connected with computer? Have you tried installing latest printer driver?
    What is the current version of Reader installed on your machine.
    Regards,
    Ajlan Huda.

  • Adding an item to Po doesn't trigger any output

    Hi gurus,
    I need some help from you as we have an issue on changes on PO don't trigger any output.
    I explain the process :
    - user creates an SHC and then a PO is generated in approval status.
    - PO is released and then a mail is sent to vendor (there is an entry in tx SPPFP). That works fine.
    - a new item is added to PO and delivery date is changed. So it must be approved again by someone.
    - PO is released but no mail is sent to vendor. No entry in transaction SPPFP.
    I read a lot of messages on this forum about problems on triggering purchase orders. As I've seen, the usual problem is to avoid outputs when po is changed. My issue is the opposite.
    I checked table BBPD_PO_METAOUT and there is an entry for BBP_PDIGP-DELIVED_DATE is output relevant.
    We have condition-dependent document output customizing:
    - Automatically scheduled
    - Max. 1 Action for Each Action Definition
    - Time of processing : when saving document
    This is a ECS scenario, SRM server 550, support package SAPKIBKT08.
    How can I fix this problem?  I guest standard behaviour must be to trigger output when changing purchase order.
    Thanks for any help.
    Regards.
    Teresa Martinez
    Edited by: Teresa Martinez Alonso on Aug 5, 2008 5:14 PM

    Hello
    Please check the follow
    1)Please follow the instruction in the attached note 564826.
    2)ANY change in the PO after it has been sent to vendor will generate
    an automatic output.
    You might want to either:
    - Change your customizing settings so the PO output is not automatically
      sent to vendor.
    - Or apply the following note so the system does not generarte an output
      when a PO is changed:
    820344 Preventing output of changes to purchase orders
    Please also try the settings below
    Processing Time:               Processing When Saving document
    Processing Time Not Permitted: Immediate Processing
    "Partner Determination for Action" Frame
    Determination Technique :      Simple Determination of Procurement Docu
                                   ment (PO).
    Regards
    Summer

  • ITunes won't open on my windows laptop, and it doesn't give any error message, help!

    iTunes store won't open on my windows laptop, no error message given

    Refer to this article to delete SC files:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime:
    Control Panel  > Programs n Features > highlight Quicktime, click CHANGE then REPAIR

  • Get-mailbox command doesn't give arabic fileds

    Hi,
    When we do 'get-mailboxstatistics  or export the AD properties to txt or CSV file, all Arabic entered fields are shown as ???? (question marks).  Kindly suggest how to get these Arabic fields (such as designation, department) extracted in Arabic
    itself.
    Thanks & regards,

    Hi,
    To help you with this problem better, please post what are the commands do you use and what's the result in txt or CSV file.
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • ST01 doesn't give any data

    Hi,
    I run ST01 on ECC6 on transaction IW52 and specific user, only Authorization check. When trying the Analysis I get the message "No records that correspond to these search criteria found". The range of the time is OK.
    What do I do wrong ?
    Thanks, Amos.

    Hi there.  Did you switch on the trace beforehand and have the user try to access the transaction?  I don't think you're going to find any records if you don't have an active trace for the user.
    - April King

  • Money converter doesn't show any output...

    Hi, I have the following source :
    package euros;
    import java.awt.*;
    import java.awt.event.*;
    import java.applet.*;
    public class converter extends Applet
    double beginWaarde, franceuro, guldeneuro, uitkomst;
         Button knop1, knop2, knop3, knop4, knop5, knop6;
         TextField invoer, uitvoer;
         public void init()
         {   setLayout(null);
         knop1 = new Button( "gulden => euro" );
         knop2 = new Button( "franc => euro" );
    knop3 = new Button( "euro => francs" );
    knop4 = new Button( "franc => gulden" );
    knop5 = new Button( "gulden => franc" );
    knop6 = new Button( "euro => gulden" );
    knop1.setBounds(0,25,100,25);
    knop2.setBounds(100,25,100,25);
    knop3.setBounds(200,25,100,25);
    knop4.setBounds(300,25,100,25);
    knop5.setBounds(400,25,100,25);
    knop6.setBounds(500,25,100,25);
    invoer = new TextField( "0" );
    uitvoer = new TextField();
    String invoer1 = invoer.getText();
    Double menno = Double.valueOf( invoer1 );
    beginWaarde = menno.doubleValue();
    invoer.setBounds(50,100,100,25);
         uitvoer.setBounds(150,100,300,25);
    add( knop1 );
              add( knop2 );
    add( knop3 );
    add( knop4 );
    add( knop5 );
    add( knop6 );
    add(uitvoer);
    add(invoer);
         public boolean action( Event e, Object o )
              if( e.target == knop1 )
              {       uitkomst = beginWaarde/2.20371;
    uitvoer.setText( "Het aantal Euro's is : " + uitkomst );
                   repaint();
    return true;
              if( e.target == knop2 )
    uitkomst = beginWaarde/6.3;
    uitvoer.setText( "Het aantal Euro's is : " + uitkomst );
    repaint();
                   return true;
              if( e.target == knop3 )
    uitkomst = beginWaarde*6.3;
                   uitvoer.setText( "Het aantal Francs is : " + uitkomst );
    repaint();
                   return true;
    if( e.target == knop4 )
    uitkomst = beginWaarde/2.86;
                   uitvoer.setText( "Het aantal Guldens is : " + uitkomst );
    repaint();
                   return true;
    if( e.target == knop5 )
    uitkomst = beginWaarde/2.86;
                   uitvoer.setText( "Het aantal Francs is : " + uitkomst );
    repaint();
                   return true;
    if( e.target == knop6 )
    uitkomst = beginWaarde*2.2037;
                   uitvoer.setText( "Het aantal Guldens is : " + uitkomst );
    repaint();
                   return true;
              return false;
    and don't get any awnsers in the textfield called 'uitvoer'
    It just shows 0.0 all the time instead of one of the calqulations specified...
    I can't find out what's wrong with it.
    Can someone help me ??
    Thanks in advance,
    Menno.

    your code can be changed as below.
    package euros;
    import java.awt.*;
    import java.awt.event.*;
    import java.applet.*;
    public class converter extends Applet
         double beginWaarde, franceuro, guldeneuro, uitkomst;
         Button knop1, knop2, knop3, knop4, knop5, knop6;
         TextField invoer, uitvoer;
         public void init()
              setLayout(null);
              knop1 = new Button( "gulden => euro" );
              knop2 = new Button( "franc => euro" );
              knop3 = new Button( "euro => francs" );
              knop4 = new Button( "franc => gulden" );
              knop5 = new Button( "gulden => franc" );
              knop6 = new Button( "euro => gulden" );
              knop1.setBounds(0,25,100,25);
              knop2.setBounds(100,25,100,25);
              knop3.setBounds(200,25,100,25);
              knop4.setBounds(300,25,100,25);
              knop5.setBounds(400,25,100,25);
              knop6.setBounds(500,25,100,25);
              invoer = new TextField( "0" );
              uitvoer = new TextField();
    //          String invoer1 = invoer.getText();
    //          Double menno = Double.valueOf( invoer1 );
    //          beginWaarde = menno.doubleValue();
    // This part should be moved to the method action(...)
              invoer.setBounds(50,100,100,25);
              uitvoer.setBounds(150,100,300,25);
              add( knop1 );
              add( knop2 );
              add( knop3 );
              add( knop4 );
              add( knop5 );
              add( knop6 );
              add(uitvoer);
              add(invoer);
         public boolean action( Event e, Object o )
              if( e.target == knop1 )
    // getting the value in invoer
                   String invoer1 = invoer.getText();
                   Double menno = Double.valueOf( invoer1 );
                   beginWaarde = menno.doubleValue();
                   uitkomst = beginWaarde/2.20371;
                   uitvoer.setText( "Het aantal Euro's is : " + uitkomst );
                   repaint();
                   return true;
    }

  • JSP doesn't produce any output

    6.1sp1
              What am I doing wrong? This JSP page:
              <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2">
              <html>
              <body>
              Hello, World!
              </body>
              </html>
              </jsp:root>
              compiles into :
              public void _jspService(javax.servlet.http.HttpServletRequest request, javax.servlet.http.HttpServletResponse response) throws java.io.IOException, javax.servlet.ServletException
              // declare and set well-known variables:
              javax.servlet.ServletConfig config = getServletConfig();
              javax.servlet.ServletContext application = config.getServletContext();
              javax.servlet.jsp.tagext.Tag _activeTag = null;
              // variables for Tag extension protocol
              Object page = this;
              javax.servlet.jsp.JspWriter out;
              javax.servlet.jsp.PageContext pageContext =
              javax.servlet.jsp.JspFactory.getDefaultFactory().getPageContext(this, request, response, null, true, 8192, true);
              out = pageContext.getOut();
              JspWriter _originalOut = out;
              javax.servlet.http.HttpSession session = request.getSession(true);
              try { // error page try block
              } catch (Throwable __ee) {
              while (out != null && out != _originalOut) out = pageContext.popBody();
              ((weblogic.servlet.jsp.PageContextImpl)pageContext).handlePageException((Throwable)__ee);
              //before final close brace...
              Dimitri
              

    I am confused now.
              [5.3.12] says:
              All text that is uninterpreted by the JSP translator is converted
              into the body for a jsp:text element. As a consequence no XML elements
              of the form described in Section JSP.5.2.11 will appear in the XML view
              of a JSP page written in JSP syntax.
              and [5.2.11] says:
              The XML syntax for JSP pages also allows an XML element that does
              not rep-resent neither a standard action nor a custom actionto appear
              anywhere where a jsp:text may appear. The interpretation of such an XML
              element is to pass its textual representation to the current value of out,
              after the whitespace processing described in Section JSP.5.2.1.
              which means that page like this:
              <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2">
              <html>
              <body>
              Hello, World!
              </body>
              </html>
              </jsp:root>
              should work - "...The interpretation of such an XML element is to pass its textual
              representation to the current value of out...", right?
              And the schema appear to allow this (B.2):
              <xsd:group name = "Bodygroup">
              <xsd:choice>
              <xsd:element ref = "directive.page"/>
              <xsd:element ref = "directive.include"/>
              <xsd:element ref = "scriptlet"/>
              <xsd:element ref = "declaration"/>
              <xsd:element ref = "expression"/>
              <xsd:element ref = "useBean"/>
              <xsd:element ref = "setProperty"/>
              <xsd:element ref = "getProperty"/>
              <xsd:element ref = "include"/>
              <xsd:element ref = "forward"/>
              <xsd:element ref = "plugin"/>
              <xsd:element ref = "text"/>
              <xsd:any namespace="##other" processContents = "lax"/>
              </xsd:choice>
              </xsd:group>
              newsgroups.bea.com <[email protected]> wrote:
              > As per JSP1.2 section 5.3.12 you have to put any template text into
              > <jsp:text>...</jsp:text> blocks. There are also some examples further along
              > in the specification.
              > Sam
              > "Dimitri Rakitine" <[email protected]> wrote in message
              > news:[email protected]...
              >> 6.1sp1
              >>
              >> What am I doing wrong? This JSP page:
              >>
              >> ---
              >> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2">
              >> <html>
              >> <body>
              >> Hello, World!
              >> </body>
              >> </html>
              >> </jsp:root>
              >> ---
              >>
              >> compiles into :
              >>
              >> public void _jspService(javax.servlet.http.HttpServletRequest request,
              > javax.servlet.http.HttpServletResponse response) throws java.io.IOException,
              > javax.servlet.ServletException
              >> {
              >>
              >> // declare and set well-known variables:
              >> javax.servlet.ServletConfig config = getServletConfig();
              >> javax.servlet.ServletContext application =
              > config.getServletContext();
              >> javax.servlet.jsp.tagext.Tag _activeTag = null;
              >> // variables for Tag extension protocol
              >>
              >> Object page = this;
              >> javax.servlet.jsp.JspWriter out;
              >> javax.servlet.jsp.PageContext pageContext =
              >>
              > javax.servlet.jsp.JspFactory.getDefaultFactory().getPageContext(this,
              > request, response, null, true, 8192, true);
              >>
              >> out = pageContext.getOut();
              >> JspWriter _originalOut = out;
              >>
              >> javax.servlet.http.HttpSession session = request.getSession(true);
              >>
              >>
              >>
              >> try { // error page try block
              >>
              >> } catch (Throwable __ee) {
              >> while (out != null && out != _originalOut) out =
              > pageContext.popBody();
              >>
              > ((weblogic.servlet.jsp.PageContextImpl)pageContext).handlePageException((Thr
              > owable)__ee);
              >> }
              >>
              >>
              >> //before final close brace...
              >> }
              >>
              >> ???
              >>
              >> --
              >> Dimitri
              Dimitri
              

  • ITunes won't open, and doesn't give any error message

    Whenever I try to open iTunes (7.0.2, if that matters), my system tray shows a little yellow triangle with an exclamation point, and iTunes fails to open. The icon shows no message when I hover over it, and if I click on it, it vanishes. I deleted iTunes, reinstalled it, restarted my computer, and all that jazz, but the problem remains absolutely unchanged. I tried creating another user account and opening iTunes on that account, and it works, but obviously, abandoning my current account is not an ideal solution. I don't have the first clue what's going on, or why, or what the yellow triangle icon is. I need help!
      Windows XP  

    Are you having the same problem with Quick Time? I was having the same problem with both Itunes and Quick Time, and I removed and reinstalled, and it was still happening, until I notices that I had an older version of Quick Time still in the program files. After I removed the older version of Quick Time, and then reinstalled Itunes, the problem disappeared.

  • Are there viruses out there than can infect your Mac without you knowing anything. The virus is so stealth that it doesn't give any symptoms.

    I have reason to believe my job is syping on me and i would like to know if there are viruses out there that can infect your Mac without you knowing anything. I believe there is one called "Finfisher".

    FinFisher is an extremely high-priced spyware tool marketed to governments and law enforcement agencies. It's very unlikely that your employer would be able to obtain a copy.
    Further, at this time, there is no known malware capable of infecting an up-to-date Mac running Mac OS X 10.6.8 or newer. Of course, physical access changes the rules. If your employer has had unsupervised physical access to your machine, they could have done anything.
    If they have had that access, and you truly believe that they have done that, there's only one way to clean your Mac up: erase everything and start over from scratch. See:
    How to reinstall Mac OS X from scratch

  • Data template doesn't give any data

    Hi, I'm new to BI Publisher and I'm trying to get a simple data template to work. My template is this:
    <dataTemplate name="Test" dataSourceRef="demo">
    <dataQuery>
    <sqlStatement name="q1">
    <![CDATA[
    SELECT cust_name, forename
    FROM customer
    WHERE cust_name='WILLIAMS'
    ]]>
    </sqlStatement>
    </dataQuery>
    <dataStructure>
    <group name="gcust" source="q1">
    <element name="cname1" source="cust_name"/>
    <element name="cname2" source="forename"/>
    </group>
    </dataStructure>
    </dataTemplate>
    This is valid but when I view, the xml is shown but no data. Have I missed something obvious? I'm trying to follow the online examples/instructions to make this work. If I just use an sql statment as my data source it works fine.

    Tracey,
    Lately I've had to customize the Data Template to get a beforeReport trigger to work. So I'm new to the Data Template stuff.
    I had the same problem as you, so I'll share with you what I found to get my simple Data Template to work.
    Try these changes to your Data Template:
    1) Change your sqlStatement name to match your XSLT for-each:group_name in your RTF template. If your XSLT for-each:group_name in your RTF document looks like this, <?for-each:ROW?>, then:
    a) Change <sqlStatement name="q1"> to <sqlStatement name="ROW">.
    b) Change <group name="gcust" source="q1"> to <group name="gcust" source="ROW">
    James

  • My MBP doesn't give any low battery warning...

    it just shuts down, like somebody pulled the plug. On my old laptop a warning would appear and if you ignored it long enough the computer would go to sleep.  Nothing like that on Lion? It's really drag.

    Here are my battery stats:
      Charge Information:
      Charge Remaining (mAh):          5353
      Fully Charged:          Yes
      Charging:          No
      Full Charge Capacity (mAh):          5378
    Health Information:
      Cycle Count:          184
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1045
      Voltage (mV):          12324

Maybe you are looking for