Multiple application pools for ColdFusion possible in the same IIS website?

I would like to set up a single website with CFM11 under IIS8.5
In this website there are several CFM applications, each under a different "Application" subfolder. For security purposes, monitoring and separate maintenance shutdowns per application, these would all need their own "application pool".
However, this means that these applications should run under a different application pool than their website root node. In IIS this causes a 403.18 exception:
HTTP Error 403.18 - Forbidden
The specified request cannot be processed in the application pool that is configured for this resource on the Web server.
Most likely causes:
•An ISAPI filter or custom module changed the URL to run in a different application pool than the original URL.
•An ISAPI extension (or custom module) used ExecuteURL (or ExecuteRequest) to run in a different application pool than the original URL.
•You have a custom error page that is located in one application pool but is referenced by a Web site in another application pool. When the URL is processed, it is determined by IIS that that it should have been processed in the first application pool, not the other pool.
•The Web site has multiple applications configured. The application this request is configured to run in is set to run in an application pool that does not exist.
All works fine if the "applications" in the subfolders run under the same application pool as the website root. However that is not my preferred setup... The behaviour is consistent over all CFM-applications that I deploy, no matter how simple they are...
Two questions:
- is coldfusion actually looking to "higher" folders than I expect it to? (and can that be avoided)
- any hints or experiences on how to avoid / solve this issue?

Here are the steps you need to follow:
When you create connector for your ColdFusion 11 website, you get the “Jakarta” as virtual directory added under your website in IIS. If you don't then add 'jakarta' as virtual directory in your website.
You need to right click on “Jakarta” folder and click on “Convert to Application”.
Select the new Application Pool of the Application (say Test) added under website (CF 11)
Click OK. Restart IIS.
NOTE : You need not to restart IIS as well however if you still face the issue after following the above steps then try to restart IIS.
HTH
Thanks
VJ

Similar Messages

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

How to get multiple output formats for each execution of the report?

Hi,
Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
Thanks

In Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations.

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name. Make sure the settings there are correct.

I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guide

You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.

Is it possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time?

I've always used PC and I'm planning on making the transition to Mac. That's why I'm considering buying an iPad. Today I went to Best Buys and the Mac guy told me that it isn't possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time. Is that true? I'm a speaker and that was the main reason I was considering buying an iPad, so I didn't have to carry my laptop. Thanks for your help!

Thanks for your reply. Looks like it can as I have just found this https://www.youtube.com/watch?v=nKp02y4JXVs

I am a student, I am going to order a MacBook Pro from education shop. Is that possible to apply for tax free at the same time?

I am a student, I am going to order a MacBook Pro from education shop. Is that possible to apply for tax free at the same time?

In the US I have not seen a state that allows an individual to claim tax exemption...that is reserved for authorized institutions like public school systems. Only certain states do not have no-sales tax laws. When I lived in France, to be free from VAT one had to be a non-citizen and would be reimbursed for goods that were shipped out of the country upon exiting the country...not while still residing there. That was pretty typical of other European countries at the time, Pre-EU days, that is.

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection?

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection and remove all the other stuff?

Very easily. I have an iPod touch and iPad on the same account with totally different content.
If you use iTunes, connect each iPad to your computer and open iTunes and deselect any automatic updating/syncing. If you don't sync with iTunes but have them set up independently, under the settings, App Store, turn off automatic downloads for apps, etc.
I'm old fashioned, I set up and sync my iPad and iPod to my computer and iTunes. Each device has a different name and I manage content manually and only allow sharing on what I want shared.

Does the Imovie Application for Ipad 2 have the same trailers loaded that the Imovie for Mac has?

Does the Imovie Application for Ipad 2 have the same trailers loaded as the Imovie Application for Mac regular computers

They are 2 separate apps, there are no trailers for the IOS version.
http://www.apple.com/ipad/from-the-app-store/imovie.html

I want to check the status of application No. For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

Thank you for your attention
I want to check the status of application No. W439602096
For it is written in my account was canceled and I did not do so
I urgent news about his condition and the reason for canceled
I redial the same time as the sender before you
We are waiting for you

This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

I just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help

just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help

Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Deploying application with several web modules having the same context root

Hi,
I would like to be able to deploy an application in Weblogic 12c having one ejb module and several web modules with the same context root. Even though the web modules have the same context root, each of them is deployed to a different virtual host.
Weblogic allows deploying the modules this way as long as their targets are different (i.e. each having a distinct virtual host). However this works only when I don't select a target for the .ear:
Component Type Current Targets
application.ear Enterprise Application (None specified)
application.jar EJB AdminServer
web1.war WEBAPP virtualHost1
web2.war WEBAPP virtualHost2
However if I select as target for the .ear to be AdminServer, the deployment doesn't work anymore, complaining that the context roots are in conflict.
If I remove web2.war from the .ear and deploy the .ear and .jar to AdminServer and web1.war to virtualHost1, the deployment works but the strange thing is that the web application can be accessed also through the AdminServer's main network channel, even though I would expect that it should be accessible only through virtualHost1 network channel. I believe this is the reason why there are context root conflicts when specifying a target for the .ear, because both wars are made accessible to the main network channel.
The reason why I want to keep the wars inside the same .ear is because I want to make them access the application's local EJBs (since as far as I know it's not possible to access a local EJB outside the application even if they belong to the same VM).
Is there a way to deploy the web modules only to the virtual hosts without being targeted to the main network channel?
Regards,
Alexandru

Murphy's Law: If anything can go wrong it will
A corollary to Murphy's law: When everything fails, read the manual.
Web application funda: Every web application must have its own context root. So, if wkfsocos is one
web application then, wkfsocos1 is another web application -
and hence must have its own context root.
Hello Aman,
If you are in E-Commerce version 4.0, then read this
[ISA_Buildtool document |https://service.sap.com/~sapdownload/011000358700001920472003E/ISA_BuildTool_10.pdf]
to create a copy of the application in its own context root.
From your URL pattern I guess you are in E-Commerce version 4.0.
If you are in E-Commerce 5.0 or above, then the
[Extension Guide |http://service.sap.com/~sapdownload/011000358700006120622006E/]gives steps to create a copy with its own context root for use in modification.
(See the chapter on - Creating a project specific Web Application with own context root )
Both these links require access to SAP Service Marketplace. You can also find the
documents through /instguides shortcut in Service Marketplace.
Easwar Ram
http://www.parxlns.com

I am receiving updates everyday for creative cloud, always the same updates (sometimes even two time

i am receiving updates everyday for creative cloud, always the same updates (sometimes even two times a day . Is there a way to stop that?

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

Multiple application pools for ColdFusion possible in the same IIS website?

Similar Messages

Maybe you are looking for