Multiple channels in.......multiple channels out

Hello All
I have attached a zip file which containe some vi's. The vi's are downloadable from a manufacturers webiste to aid in the use of their products.
see here:  http://www.phidgets.com/products.php?category=0&product_id=1018_2
The vi(s) are used with a board that has 7 digital inputs (0,1,2,3,4,5,6,7). However the attach vis' only allows a single channel read.
I will be reading a pulse train at each channel input, but don't want to replicate the code for each channel.
I have considered using a For Loop to handle the polling through the channels (with an array attached to the vi channel input control), but how to go about indicating the output of all the channels ( a puls train remember), I am totally at a loss.
Could you please suggest how I might modify the vi to allow all 7 channels to read a pulse train appearing at the inputs, and display it either as a graph or boolean (doesn't really matter which)
Thnaks for your assistance
Regards
Ray
Solved!
Go to Solution.
Attachments:
Forum.zip ‏367 KB

Ravens Fan,
I was trying to extract every 8th element in to an array. This is an Implementaion using reshape array.
@Ray: please feel free to use the code as you wish, glad I could be of help.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

  • Single access point with multiple ssids and single channel possible?

    Hi everybody.
    I have this silly question.
    Let say we have three vlans, vlan1,2,3  and they are mapped to wlans as follows:
    Vlan 1  ssid1
    Vlan 2 ssid2
    Vlan3 ssid 3
                      AP --------trunk------Switchted network.
    Our Ap  has mobile devices in three wlans, i.e ssid1ssid2 and ssid3
    Since AP uses half duplex mode,  mobile devices need positive ack from ap  before they can send data,  therefore once channel let say channel 3( assuming 802.11b is used) can be shared by all mobile devices in three wlans.  
    Is  my understanding correct?
    Thanks and have a great weekend.

    Hii ,
    Yes ,that is pretty much possible as suggested by other experts on board. Depending on your access point you will have 1 (2.4 GHz) or  both 2.4 & 5GHz radios.
    You can configure multiple SSIDs (up to 16 ) known as MBSSID mode in autonomous environment. In Controller based architecture you can configure up to 512 WLAN (SSID) and transmit any 16 of them per AP (using AP group feature). However , it is recommended to keep multiple SSID count below 8 as for each SSID separate beacon will be sent on air which consumes more air time.
    Hope this helps
    Thanks
    Vinay

  • What is SAP recommended approach to create multiple Sender Idoc_AAE adapters channels?

    Hi All,
    We have more than 100 interfaces which receives Idocs from multiple SAP ECC Systems. What is the best approach to use Idoc_AAE sender adapter with multiple communication channels for One system and for multiple SAP systems as well.
    Q) How many communication channels we can assign or bind to one Resource Adapter(Assume InboundRA)?
    Q) What is performance impact if we create more Resource Adapter to Connect multiple SAP System?
    Please share your views to create multiple Idoc_AAE sender communication channels to connect one SAP ECC Systems?
    Regards,
    Sreeramulu Konjeti.

    Hi Vertika - It should work without changing the occurrence as it's on the sender side...
    In your mapping, you would receive all the IDOC's though the occurrence is 0..1...
    Just simply paste the payload in the test tab and see.. it should not throw any error..

  • Basic question about multiple AP's and channel selection

    I have approximately 10 AP's (Aironet 1240G) which are to be deployed one of my office floors. We looked at a floor diagram and made sure that we ordered enough of them to completely saturate the floor with wireless coverage. There are some AP's which are probably only 50' from each other. It is a little overkill actually.
    I have put a basic configuration on the switch so that there are two different SSID's on the AP (one for a production WLAN, and the other for a Guest WLAN). Each SSID is associated with a different VLAN.
    What I would like to know is what do about channels for the AP's? Each AP will be independently configued and controlled.
    I understand that there is a way to control which channels each AP uses, but I am not familiar with the commands or the best practices for how to configure the AP's
    Should I do something like make sure each AP is using a different channel than its nearest adjacent neighbor? Would someone mind sharing what the command to do that is, and where it is applied?
    I read through some of the archives and saw people mentioning to set "non overlapping channels", and to configure them to use channels 1,6,11. I guess I dont understand what is meant by that.
    Do you manually set one AP on channel 1, then set its neighbor to use 6, and another neighbor to use 11, and then you keep that up?
    What is the worst-case scenario on what happens when you do have AP's too close to each other set on the same channel?
    I am happy to read through documentation if someone wouldnt mind pointing me to it. I am still trying to understand the concept, and then I should be able to understand the documentation that came with the AP.
    Thank you for your help.

    So your deploying autonomous access Points. If this was a Controller based deployment, it would actually manage the channels for you dynamically.
    But what you really want to do is see you APs doing something like this:
    (imagine each number represents an AP, and it channel)
    1 6 11 1
    6 11 1 6
    11 1 6 11
    1 6 11 1
    This is an Autonmous configuration guide. I think it has a small section on channel assignment. If you're doing this manually, I think you specify the actual frequency to use in the CLI instead of channel number.
    http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43rf.html
    So from the CLI under the Dot11Radio0 you'd do something like "channel 2412" for Channel 1... 2437 for 6, 2462
    for 11....
    If you have APs next to each other on the same channel, you are likely to have clients interferring with each other.

  • How to select multiple records in ALV with out pressing ctrl

    Hi Experts,
    Is there a way to select multiple records in ALV with out pressing ctrl button on the key board?
    Selection and deselection should allow multiple records.
    any clue is highly appreciated.
    regards,
    Ajay

    The keyboard always plays a role, although with the Shift key you can select blocks of records.
    ○       CTRLclick, CTRLspacebar
    Toggles a selection.
    ○       SHIFTclick, CTRLshift
    Selects the area from the lead selection to the row selected. If no lead selection is set, the selection starts from the first row. In the multiNoLead mode, the selection starts from the row last selected

  • HT1212 My iPhone is displaying a "iPhone is disabled" notification. It asked me to enter my password multiple times before locking me out.

    My iPhone is displaying a "iPhone is disabled" notification. It asked me to enter my password multiple times before locking me out. Can you help with this?

    Hey there!
    Unfortunetly, in situations like this, the ONLY other way to bypass that four-digit passcode and/or a disabled device is to connect to a computer with the most recent version of iTunes (11.1.3), connect the device in Recovery Mode and restore it to factory settings. Restoring to factory will completely wipe the device, including the four-digit passcode.
    The steps to do so are outlined in http://support.apple.com/kb/ht1212
    (If there is any other way to bypass the passcode, it would have to be third-party, which I am not familiar with any program that can, sorry!).

  • Multiple Process agents to send out single message

    Is it possible for multiple Outbound agents to send out a single generic message? For example 2 AP BO's, Lead and Opportunity both would require to send out a generic message to another BO in  a different DU. If yes, how could this be acheived?

    it use appleID for the whole communication model so you would  not be able to msg her using imassages as that would imply that you're sending yourself an message

  • Similar channel into single channel

    Dear All,
    Is there any way to merge the multiple similar channel to single channel without flattening layers.
    If pantone reflex blue 3 times is there means i need to merge it into single reflex blue channel.
    Pls help..
    Thank you,
    Joe

    Yes spot channel only and in Same document itself.
    And the above script need to run in Extend tool script?. Coz by this script there is no changes happening.
    By using Apply image can merge only two channels at a time. And after merged into a single channel source channel also remains.
    For ex,  Pantone Reflex Blue 1
          Pantone Reflex Blue 2
    Now i need to merge into 1. so after Merging by using Apply image
    Pantone Reflex Blue 1 2
    Pantone Reflex Blue 2 (But this is to be automatically deleted after merging, which is not possible by using Apply image)
    By using the script this needs to be recover
    1) In channel options
    Color indicates - Spot Color
    Color - Reflex Blue
    Solidity - 0%
    In same way i have taken the separation in different area of my image with same spot color.
    2) If process color are taken as spot channel that also need to merge with process channel (CMYK)
    Color indicates - Spot color
    Color - C100%
    Solidity - 0%
    If this is option selected in this channel to be merge with Cyan process color channel.
    By using Apply image option i used to give Multiply only and Opacity to 100%. Same need to apply this script. Pls help..
    Thank you,
    Joe

  • RMAN backup multiple database on multiple hosts using recovery catalog

    I would like to know if I create one schema called "rman" is enough for repository for backing up multiple database on multiple machines using recovery catalog.
    Or is there any better way to handle for reporting peposes.
    Quick response is appreciated.
    OS Solairs9.
    Oracle 9i.
    Thanks.
    Srini

    This worked perfectly fine except for putting sbt in single quotes.
    See the reults below.
    You are just great Daljith.
    Thanks and I do appreciate your help.
    Still you did not answe my question.
    How come I see backups from June and May even though they are from
    diffierent catalog database?
    RMAN> allocate channel for maintenance device type 'sbt';
    allocated channel: ORA_MAINT_SBT_TAPE_1
    channel ORA_MAINT_SBT_TAPE_1: sid=9 devtype=SBT_TAPE
    channel ORA_MAINT_SBT_TAPE_1: VERITAS NetBackup for Oracle - Release 5.0GA (200)
    RMAN> crosscheck backup;
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_2_1_624018818 recid=1 stamp=624018818
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_1_1_624018817 recid=2 stamp=624018818
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_3_1_624019733 recid=3 stamp=624019733
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_5_1_624020641 recid=4 stamp=624020642
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_4_1_624020641 recid=5 stamp=624020642
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_6_1_624020677 recid=6 stamp=624020677
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_8_1_624115253 recid=7 stamp=624115253
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_7_1_624115252 recid=8 stamp=624115253
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_9_1_624116161 recid=9 stamp=624116161
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_11_1_624117067 recid=10 stamp=624117068
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_10_1_624117067 recid=11 stamp=624117068
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_13_1_624365687 recid=12 stamp=624365687
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_12_1_624365686 recid=13 stamp=624365687
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_14_1_624366605 recid=14 stamp=624366605
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_16_1_624367501 recid=15 stamp=624367502
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_15_1_624367501 recid=16 stamp=624367502
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_22_1_628264333 recid=17 stamp=628264333
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_21_1_628264333 recid=18 stamp=628264333
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_23_1_628265249 recid=19 stamp=628265249
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-00 recid=20 stamp=628266151
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_26_1_628266195 recid=21 stamp=628266196
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_25_1_628266195 recid=22 stamp=628266196
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-01 recid=23 stamp=628266233
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_29_1_628267004 recid=24 stamp=628267004
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_28_1_628267004 recid=25 stamp=628267004
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_30_1_628267919 recid=26 stamp=628267920
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-02 recid=27 stamp=628268832
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_32_1_628268875 recid=28 stamp=628268876
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_33_1_628268875 recid=29 stamp=628268876
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-03 recid=30 stamp=628268913
    Crosschecked 30 objects
    RMAN> delete expired backup;
    List of Backup Pieces
    BP Key BS Key Pc# Cp# Status Device Type Piece Name
    11820 11804 1 1 EXPIRED SBT_TAPE bk_2_1_624018818
    11821 11805 1 1 EXPIRED SBT_TAPE bk_1_1_624018817
    11822 11806 1 1 EXPIRED SBT_TAPE bk_3_1_624019733
    11823 11807 1 1 EXPIRED SBT_TAPE al_5_1_624020641
    11824 11808 1 1 EXPIRED SBT_TAPE al_4_1_624020641
    11825 11809 1 1 EXPIRED SBT_TAPE al_6_1_624020677
    11826 11810 1 1 EXPIRED SBT_TAPE bk_8_1_624115253
    11827 11811 1 1 EXPIRED SBT_TAPE bk_7_1_624115252
    11828 11812 1 1 EXPIRED SBT_TAPE bk_9_1_624116161
    11829 11813 1 1 EXPIRED SBT_TAPE al_11_1_624117067
    11830 11814 1 1 EXPIRED SBT_TAPE al_10_1_624117067
    11831 11815 1 1 EXPIRED SBT_TAPE bk_13_1_624365687
    11832 11816 1 1 EXPIRED SBT_TAPE bk_12_1_624365686
    11833 11817 1 1 EXPIRED SBT_TAPE bk_14_1_624366605
    11834 11818 1 1 EXPIRED SBT_TAPE al_16_1_624367501
    11835 11819 1 1 EXPIRED SBT_TAPE al_15_1_624367501
    Do you really want to delete the above objects (enter YES or NO)? y
    deleted backup piece
    backup piece handle=bk_2_1_624018818 recid=1 stamp=624018818
    deleted backup piece
    backup piece handle=bk_1_1_624018817 recid=2 stamp=624018818
    deleted backup piece
    backup piece handle=bk_3_1_624019733 recid=3 stamp=624019733
    deleted backup piece
    backup piece handle=al_5_1_624020641 recid=4 stamp=624020642
    deleted backup piece
    backup piece handle=al_4_1_624020641 recid=5 stamp=624020642
    deleted backup piece
    backup piece handle=al_6_1_624020677 recid=6 stamp=624020677
    deleted backup piece
    backup piece handle=bk_8_1_624115253 recid=7 stamp=624115253
    deleted backup piece
    backup piece handle=bk_7_1_624115252 recid=8 stamp=624115253
    deleted backup piece
    backup piece handle=bk_9_1_624116161 recid=9 stamp=624116161
    deleted backup piece
    backup piece handle=al_11_1_624117067 recid=10 stamp=624117068
    deleted backup piece
    backup piece handle=al_10_1_624117067 recid=11 stamp=624117068
    deleted backup piece
    backup piece handle=bk_13_1_624365687 recid=12 stamp=624365687
    deleted backup piece
    backup piece handle=bk_12_1_624365686 recid=13 stamp=624365687
    deleted backup piece
    backup piece handle=bk_14_1_624366605 recid=14 stamp=624366605
    deleted backup piece
    backup piece handle=al_16_1_624367501 recid=15 stamp=624367502
    deleted backup piece
    backup piece handle=al_15_1_624367501 recid=16 stamp=624367502
    Deleted 16 EXPIRED objects
    RMAN> list backup summary;
    List of Backups
    ===============
    Key TY LV S Device Type Completion Time #Pieces #Copies Tag
    11895 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11896 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11897 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11916 B F A SBT_TAPE 18-JUL-07 1 1
    11926 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T142315
    11927 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T142315
    11935 B F A SBT_TAPE 18-JUL-07 1 1
    11939 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11940 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11941 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11960 B F A SBT_TAPE 18-JUL-07 1 1
    11970 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T150755
    11971 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T150755
    11977 B F A SBT_TAPE 18-JUL-07 1 1
    RMAN>
    Message was edited by:
    user539835

  • Read channel 1 versus channel 2

    Hello,
    I went through on Core 1 Lab View course and I start to understand some of it. I have difficulty to write the following application in Lab View 8.5 and 2011 version.
    I need to write a VI for the Tektronix TDS 210 2 channel oscilloscope to be able read channel 1 versus channel 2 as( x versus y). Also I need to run this scope as a digital storage scope (store the waveform in the memory and be able to recall in determinate time range) I downloaded the driver for the Scope and I am able to run the Single waveform or Multiple waveform VI but I do not know how do I modify those VI to be able the function as I mentioned above.
    I need to know also how I can lock this VI to read the instrument always a same GPIB address. 
    Could anybody help me about this project please? 
    Thanks
    Joe
    Solved!
    Go to Solution.

    Jozsef,
    If possible can you give us more information on your system?  What GPIB card are you using, and how are you addressing the tektronix device?  This driver page may be of use to you, once we get more information we can definitely give you more help on this issue.
    http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=288
    Regards,
    J Newk
    Systems Engineer
    National Instruments

  • Multiple Domain files, Multiple Sites, Publishing Problems

    I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
    However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
    The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
    I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
    I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

    Mark:
    I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
    This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
    Do you Twango?

  • Bridge CS6 Script to Find Multiple Images in Multiple folders.

    Is it possible to have a script to find multiple images within multiple folders that is on a external hard drive?
    For instances I have a external hard drive assuming it's for a library of pictures.
    Inside this hard drive has folders named as below
    1-1000
    1001-2000
    2001-3000
    3001-4000
    If I had a perfect csv file for example that calls out for specific pictures for example 2, 10,1500 and 2000 (remember think big, it may be a larger list than this it could be hundreds or thousands of pictures); is there a script that would allow me to find these images and save a copy of them on to my desktop so that way I don't have to hunt for them in the old fashion way? I can read scripts but writing them is a different story.

    If you want to go with Batch I would recommend creating an Action of more or less these steps:
    • set the resolution to the same as the background image’s
    • change the image from Background Layer to regular Layer if necessary
    • convert it to a Smart Object
    • add a Drop Shadow Layer Style to the image (do not use Global Angle)
    • place the background image (File > Place …)
    • move it behind the image layer
    • Image > Reveal All
    • make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
    • select and transform the image layer to fit the intended position
    This would naturally work out best if the images had the same size and proportions.
    For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
    Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

  • Synchronize multiple tasks and multiple boards with X-series USB devices

    Hi all,
    I am trying to figure out how to synchronize multiple tasks across multiple X-series USB boards (6353, to be precise). 
    I have to run a digital output task AND an analog output task on each board.  All four tasks (the DO and AO on Board 1, and the DO and AO on Board 2) must be synchronized.
    I know how to synchronize multiple tasks on a single board.  I've been doing that for years.  That works fine.
    I know how to synchronize a single task across multiple boards (say, a DO task across 2 different boards).  That works fine too.
    For the life of me, I can't figure out how to marry the two.  Everything I've seen, all of the examples, etc. assume you want to do one or the other, or that you have a RTSI cable available.  Are there any examples out there that synchronize multiple tasks across multiple USB boards?
    I tried exporting the AO clock signal from my master AO task to PFI12, and then using the signal on PFI12 to as the clock source for the remaining tasks (Dev1/PFI12 physically connected to Dev2/PFI12, and Dev1/PFI12 set as the clock source for Dev1's DO task). 
    I have also tried setting Dev1/aoSampClock as the source for Dev1's DO task.
    Under both configurations, I invariably get error -89137 when I try to start the tasks -- required resources (PFI12) in use by Dev1/do/SampClock.  I understand what the error is telling me.  What I don't understand is why I'm receiving this error when I don't have any of my tasks configured to use the DO Sample Clock.  It seems as though it is not possible to export a clock signal to a PFI line and simultaneously run a clocked digital task, even if the clock source for that task is specified as something other than the DO Sample Clock?
    So, my question is, is it possible to do what I want to do?  And if so, how do I do it?  How do I configure a common clock source across multiple tasks running on multiple USB boards?
    Hoping for insight from those wiser than I...
    Diane
    Solved!
    Go to Solution.

    Update:  I decided to try using a counter as the source clock.  One cannot use counter 0 to accomplish this, but it does appear to work with counter 1.
    I'll take what I can get.  Fortunately I have two spare counters.  (Yes, I'm running counter tasks too -- 6 of them -- but they don't have to be synchronized.)
    I have to add both digital and analog input tasks as well -- all synchronous with each other, but not with the output tasks since they'll be running at different sample rates.  I hope I'm able to use a counter as the source clock for those as well.
    My head aches.

  • ITunes 9.2 stops adding multiple artwork in multiple selection mode. Help?

    Hi everybody,
    Since 2003 I've been using iTunes and adding multiple artwork in several tracks at once.
    Lets say: I added 10 tracks of a CD to iTunes library, then selected all of them and then right click to choose "Get Info > Multiple Item Information". Then I just dragged and dropped as many artwork pieces as I wanted onto the artwork window, one by one. Clicked OK and voilá.
    Now it will only accept one artwork. Following the procedure I used to do, now it will only take the last artwork I place onto the artwork window.
    Now the only way to get multiple artwork in a CD is adding all the artwork (lets say the 20 pages of the booklet) one by one in "each track" separately!, which is a pain in the neck.
    So now I have to add artwork one by one to each track one at a time.
    Is there a NEW way to add multiple artwork on multiple tracks at once in iTunes 9.2?
    Screen shot: http://grab.by/51UT
    Thank you for your help.

    Hi- you might've already figured this out on your own, but:
    A) add the first artwork picture (what you want for your cover artwork) using "Get Info > Multiple Item Information" - and close the Multiple Item Information window
    B) with the multiple tracks still selected, drag your additional artwork picture items into the artwork panel in the lower left corner of the iTunes window (this is the artwork panel titled "selected item").
    C) your additional artwork will be added to all of the selected items. You can click through the artworks using the left/right arrows above the artwork panel.
    Obviously you can also use this same method to add that same additional artwork to any other tracks, from other albums, etc. simply by selecting them as well.
    Side note, the easiest way to select all tracks from a single album: select the starting track, then use ctrl-shift and select the ending track- all tracks between those two will be selected.
    Aaaaaand you're done! Hope this helps!

  • Batch Process multiple files in multiple folders

    I am using Acrobat 8.0.0 on Windows XP.
    Is there a way to create some type of macro to combine multiple PDFs within multiple folders? Or better yet, I'd like to combine the files into a PDF package with security.
    Thanks, let me know if I need to be more clear of provide more info.

    Thanks!
    From what I can tell Process Multiple Files allows input from three places:
    1. A folder. 2. Import (like a scanner?) 3. Open files.
    So it might be nice if it had a 4th option that would allow files to come out
    of Organizer via tags, albums, etc. And if that option was chosen then it
    would be nice to save the tags, and create version sets optionally.
    But my guess is that from a product design perspective the thinking is
    that most people would rather work in Organizer and then perform
    actions on a logical set of photos from there. Certainly, that would be my
    preference.
    What I'd like to do is do be in Organizer, select my images via tag(s),
    run QuickFix on them, (all of that I can do), then reduce the file size,
    and save the finished product as a version set. Then only thing I can't do
    in PSE7 is reduce the file size. Of if there is I don't know how to do
    it automatically.
    Well, thanks for the help!

  • Un-'Locking' multiple files in multiple folders....

    So I just spent 2 hours at the 'Genius' bar manually 'unlocking' hundreds if not thousands of photos in my 'iPhoto' (05) library in order to upgrade to iPhoto '06... apparently, when I imported some pictures from Windows... it brought them in as 'locked' (i.e. when you 'get info...' on a file, and it has the 'Locked' check-box checked), well apparently, in order to upgrade to iPhoto '06, you have to 'unlock' every single file... given the way that iPhoto stores your files, if you've got a few locked, scattered throughout your library, it's going to take a LONG time to find them all and unlock them.
    My question for the Mac OS X specialists at large is, "Is there a way to un-lock multiple files in multiple directories and folders, WITHOUT doing it manually? I can't believe I actually sat at a genius bar and did this for TWO hours. According to my Genius, that was the only way to do it. Are there any other Genius' out there that may have a differing opinion? Keep in mind, he was one of 2 or 3 native english speakers (here in the very busy Shibuya, Tokyo store) any solutions would be appreciated, because it appears I've got multiple files in my MacBook iPhoto library that are 'locked' and I'd like to find an easier way to unlock them.
    FYI, we went to finder and searched for 'other' "Files Write Protected" etc., but we were never able to find ONLY files that are locked... is there a better way? Surely there has to be. Looking forward to learning something new.
    Hal W.
    Tokyo, Japan
    Mac Mini, MacBook 13.3"   Mac OS X (10.4.7)  

    There's also a Terminal command that will work:
    Launch Terminal from your utilities folder, and enter this command:
    find /Users/yourname/Pictures/"iPhoto Library"/ -flags uchg -exec chflags nouchg {} \;
    Be sure you get the "spaces" right, including the ones before and after the curly braces--{}--and there is no space between \; and it should work just fine. You may want to just copy and paste the above into a text program, fill in your short user name, then copy and paste into Terminal. And it must be all one line. After you've entered the command, hit the Return key to execute it. It will look in your iPhoto Library folders for all files that have the locked flag, then change the flag to unlocked.
    Francine
    Francine
    Schwieder

Maybe you are looking for