Multiple clients with same account on a single IMAP server

Hi,
I am connecting to a IMAP server using same account but from 2 different machines. From one machine a mark a message as SEEN=FALSE. But on the second machine, the flag will still be TRUE.
Is there any way to co-ordinate between multiple clients so that all the clients are in sync.
Regards,
Nitin.

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

Similar Messages

Podcast synching on multiple macs with same account

How do I get my podcasts to synch on multiple macs and therefore ipods with same itunes authorized account, ie the subscriptions I have on home computer don't show up on my work itunes account and therefore when I'ved watched flying one way, when I land I want to load the next set of episodes, but find the need to create entirely new subscriptions?
Thanks
george

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

802.1x multiple sessions with same LOGIN+MAC on single-host port

We have 802.1x with radius server.
c2960 configured to allow only one device per port with no Mac-Bypass and no critical auth.
From time to time user seems to get multiple authentications on single port with single mac-address.
So we get several sessions on port with the same login, mac (but different session-id).
Command "dot1x re-auth int" doesn't clear those sessions. Neither do "force-unauthorized" or "shut/noshut". Only thing that helps is reboot switch.
Happens with different users.
Anybody seen this issue?
IOS 12.2(46)SE

Sure. Tried to make it short.
Config for 802.1x-aaa:
aaa new-model
aaa group server radius default
server X.X.X.X auth-port 12345 acct-port 12346
aaa authentication login default group radius enable
aaa authentication dot1x default group radius
aaa authorization exec default group radius if-authenticated
aaa authorization network default local group radius
aaa authorization reverse-access default group radius
aaa accounting suppress null-username
aaa accounting update periodic 1
aaa accounting dot1x default start-stop group radius
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
aaa accounting system default start-stop group radius
aaa session-id common
dot1x system-auth-control
interface FastEthernet0/48
switchport access vlan 1398
switchport mode access
dot1x pae authenticator
dot1x port-control auto
dot1x violation-mode shutdown
spanning-tree portfast
spanning-tree link-type point-to-point
radius-server attribute 44 include-in-access-req
radius-server attribute 44 extend-with-addr
radius-server attribute 188 format non-standard
radius-server attribute 218 mandatory
radius-server attribute 32 include-in-accounting-req format %i %h %d
radius-server attribute 55 include-in-acct-req
radius-server attribute list att
attribute 30-31,44
radius-server host X.X.X.X auth-port 12345 acct-port 12346 key keykeykey
radius-server vsa send accounting
sh dot1x int fa 0/48 det
Dot1x Info for FastEthernet0/48
PAE                       = AUTHENTICATOR
PortControl               = AUTO
ControlDirection          = Both
HostMode                  = SINGLE_HOST
Violation Mode            = SHUTDOWN
ReAuthentication          = Disabled
QuietPeriod               = 60
ServerTimeout             = 0
SuppTimeout               = 30
ReAuthPeriod              = 3600 (Locally configured)
ReAuthMax                 = 2
MaxReq                    = 2
TxPeriod                  = 30
RateLimitPeriod           = 0
Dot1x Authenticator Client List Empty
Port Status               = UNAUTHORIZED
And right now, while port is UNAUTHORIZED we have 2 sessions as follows:
sh aaa user all
Unique id 34974 is currently in use.
Accounting:
log=0x208241
Events recorded :
    CALL START
    ATTR REPLACE
    NET UP
    INTERIM START
    VPDN NET UP
update method(s) :
    PERIODIC
update interval = 60
Outstanding Stop Records : 0
Dynamic attribute list:
    0244DC34 0 00000001 connect-progress(44) 4 Auth Open
    0244DC48 0 00000001 pre-session-time(272) 4 0(0)
    0244DC5C 0 00000001 elapsed_time(339) 4 4828941(49AF0D)
    0244DC70 0 00000001 input-giga-words(111) 4 2(2)
    0244DC84 0 00000001 output-giga-words(250) 4 8(8)
    024A8C10 0 00000001 bytes_in(112) 4 119041621(7186E55)
    024A8C24 0 00000001 bytes_out(252) 4 3588031221(D5DD02F5)
    024A8C38 0 00000001 pre-bytes-in(268) 4 7373(1CCD)
    024A8C4C 0 00000001 pre-bytes-out(269) 4 8204(200C)
    024A8C60 0 00000001 paks_in(113) 4 45940138(2BCFDAA)
    024A8CB0 0 00000001 paks_out(253) 4 46979788(2CCDACC)
    024A8CC4 0 00000001 pre-paks-in(270) 4 68(44)
    024A8CD8 0 00000001 pre-paks-out(271) 4 61(3D)
No data for type EXEC
No data for type CONN
NET: Username=(n/a)
    Session Id=000088AD Unique Id=0000889E
    Start Sent=0 Stop Only=N
    stop_has_been_sent=N
    Method List=0
    Attribute list:
      024CAA00 0 00000001 session-id(336) 4 34989(88AD)
      024CAA14 0 00000001 start_time(342) 4 Jan 23 2012 16:22:08
No data for type CMD
No data for type SYSTEM
No data for type RM CALL
No data for type RM VPDN
No data for type AUTH PROXY
8: Username=157102
    Session Id=000088AD Unique Id=0000889E
    Start Sent=1 Stop Only=N
    stop_has_been_sent=N
    Method List=226B3E4 : Name = default
    Attribute list:
      0244DB94 0 00000001 session-id(336) 4 34989(88AD)
      0244DBA8 0 00000001 start_time(342) 4 Jan 23 2012 16:22:08
      0244DBBC 0 00000009 audit-session-id(599) 24 0AC5010200001C45A5C67429
No data for type IPSEC-TUNNEL
No data for type RESOURCE
No data for type 11
No data for type 12
No data for type CALL
No data for type VPDN-TUNNEL
No data for type VPDN-TUNNEL-LINK
Debg: No data available
Radi: 2032FD8
Interface:
TTY Num = -1
Stop Received = 0
Byte/Packet Counts till Call Start:
    Start Bytes In = 993512241     Start Bytes Out = 3867828098
    Start Paks In = 23586320      Start Paks Out = 28511581
Byte/Packet Counts till Service Up:
    Pre Bytes In = 993519614     Pre Bytes Out = 3867836302
    Pre Paks In = 23586388      Pre Paks Out = 28511642
Cumulative Byte/Packet Counts :
    Bytes In = 1112561235    Bytes Out = 3160900227
    Paks In = 69526526      Paks Out = 75491430
StartTime = 16:22:08 GMT+5 Jan 23 2012
AuthenTime = 16:22:08 GMT+5 Jan 23 2012
Component = DOT1X
Authen: service=8021X type=EAP method=RADIUS
Kerb: No data available
Meth: No data available
PreA: No data available
General:
Unique Id = 0000889E
Session Id = 000088AD
Attribute List:
    024A8C10 0 00000001 port-type(174) 4 Ethernet
    024A8C24 0 00000009 interface(170) 16 FastEthernet0/48
    024A8C38 0 00000009 dnis(50) 17 00-18-B9-F5-5B-30
    024A8C4C 0 00000009 clid(37) 17 48-5B-39-EA-26-7C
PerU: No data available
Unique id 34976 is currently in use.
Accounting:
log=0x10000208241
Events recorded :
    CALL START
    ATTR REPLACE
    NET UP
    INTERIM START
    VPDN NET UP
    SESSION INFO
update method(s) :
    PERIODIC
update interval = 60
Outstanding Stop Records : 0
Dynamic attribute list:
    024CAA00 0 00000001 connect-progress(44) 4 Auth Open
    024CAA14 0 00000001 pre-session-time(272) 4 2(2)
    024CAA28 0 00000001 elapsed_time(339) 4 4828961(49AF21)
    024CAA3C 0 00000001 input-giga-words(111) 4 2(2)
    024CAA50 0 00000001 output-giga-words(250) 4 8(8)
    024CAAA0 0 00000001 bytes_in(112) 4 119021816(71820F8)
    024CAAB4 0 00000001 bytes_out(252) 4 3588011179(D5DCB4AB)
    024CAAC8 0 00000001 pre-bytes-in(268) 4 6219(184B)
    024CAADC 0 00000001 pre-bytes-out(269) 4 7005(1B5D)
    024CAAF0 0 00000001 paks_in(113) 4 45939933(2BCFCDD)
    0244DB94 0 00000001 paks_out(253) 4 46979618(2CCDA22)
    0244DBA8 0 00000001 pre-paks-in(270) 4 59(3B)
    0244DBBC 0 00000001 pre-paks-out(271) 4 51(33)
No data for type EXEC
No data for type CONN
NET: Username=(n/a)
    Session Id=000088AF Unique Id=000088A0
    Start Sent=0 Stop Only=N
    stop_has_been_sent=N
    Method List=0
    Attribute list:
      024A8C10 0 00000001 session-id(336) 4 34991(88AF)
      024A8C24 0 00000001 start_time(342) 4 Jan 23 2012 16:22:18
No data for type CMD
No data for type SYSTEM
No data for type RM CALL
No data for type RM VPDN
No data for type AUTH PROXY
8: Username=157102
    Session Id=000088AF Unique Id=000088A0
    Start Sent=1 Stop Only=N
    stop_has_been_sent=N
    Method List=226B3E4 : Name = default
    Attribute list:
      024CAA00 0 00000001 session-id(336) 4 34991(88AF)
      024CAA14 0 00000001 start_time(342) 4 Jan 23 2012 16:22:18
      024CAA28 0 00000009 audit-session-id(599) 24 0AC5010200001C49A5C6990F
No data for type IPSEC-TUNNEL
No data for type RESOURCE
No data for type 11
No data for type 12
No data for type CALL
No data for type VPDN-TUNNEL
No data for type VPDN-TUNNEL-LINK
Debg: No data available
Radi: 2032F58
Interface:
TTY Num = -1
Stop Received = 0
Byte/Packet Counts till Call Start:
    Start Bytes In = 993533200     Start Bytes Out = 3867849339
    Start Paks In = 23586534      Start Paks Out = 28511761
Byte/Packet Counts till Service Up:
    Pre Bytes In = 993539419     Pre Bytes Out = 3867856344
    Pre Paks In = 23586593      Pre Paks Out = 28511812
Cumulative Byte/Packet Counts :
    Bytes In = 1112561235    Bytes Out = 3160900227
    Paks In = 69526526      Paks Out = 75491430
StartTime = 16:22:18 GMT+5 Jan 23 2012
AuthenTime = 16:22:19 GMT+5 Jan 23 2012
Component = DOT1X
Authen: service=8021X type=EAP method=RADIUS
Kerb: No data available
Meth: No data available
PreA: No data available
General:
Unique Id = 000088A0
Session Id = 000088AF
Attribute List:
    0244DB94 0 00000001 port-type(174) 4 Ethernet
    0244DBA8 0 00000009 interface(170) 16 FastEthernet0/48
    0244DBBC 0 00000009 dnis(50) 17 00-18-B9-F5-5B-30
    0244DBD0 0 00000009 clid(37) 17 48-5B-39-EA-26-7C
PerU: No data available
PS. Have no command "show authentication"

Multiple clients on same account? Feature request...

Hi,
I suspect many or most users have a phone and a PC of some sort. I have a Mac laptop and a Linux box and an Android phone.
My problem is that I can only have one client signed in at a time. If I'm on (for example) the Mac, then close the lid and run off, I have issues with Skype on the phone. When I come back, I have issues with Skype on the Mac again if I didn't sign off of the phone before opening the lid on the Mac.
I would like some sort of "use this one" button that I can direct all activity to the Skype client in front of me rather than have it go to whatever I just stopped using.
It would also be handy if there were a setting of some sort. What I can think of would be something like this:
1 If the system wakes up and Skype is running, then automatically grab activity.
2 This is my primary client. Use it when not sleeping no matter what.
3 This is a secondary client. Show me what's going on but don't make it active unless I'm actively using it.
Sorry if this has been requested before. It would be amazingly handy.
Thanks.

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

Are Multiple Classes with Same name in a single Class valid ?

package inheritance;
interface Foo
     int bar();
public class Inh6 {
     class A implements Foo // THis is the first class
          public int bar()
               return 1;
     public int fubar(Foo foo)
          return foo.bar();
     public void testFoo()
          class A implements Foo // THis is the second class
               public int bar()
                    return 2;
          System.out.println(fubar(new A()));
     public void testFooModified()
          class A implements Foo // THis is the first class
               public int bar()
                    return 4;
          System.out.println(fubar(new A()));
     public static void main(String[] args) {
          new Inh6().testFoo();
          new Inh6().testFooModified();
O/P :
2
4My question is this class "A" which is present in the different methods like testFoo() and testFooModified() different declarations of the same class or altogether different classes local to each method,something like err...Local Class ?
Thanks in Advance.

kajbj wrote:
My question is this class "A" which is present in the different methods like testFoo() and testFooModified() different declarations of the same class Why would it be the same class? They have different scopes.
KajSo you mean to say they are actually different classes with the same name,which will be invisible out of the respective methods in which they are defined ?
Thanks.

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

How to handle multiple clients with DatagramSocket

I am trying to handle multiple clients with 1 datagramSocket bind to one port (basically I have only one port to use, and I can not use TCP or any other ports). At the server side I have two threads one for receiving packets and buffering them, another for processing the packets in the buffer and sending replies.
I can have multiple clients sending datagramPackets to me and I will have to process the packets and send them to DIFFERENT clients. Ex. Client 1 sends datagramPacket to Server which sends the processed packet to Client 2. Also Client 2 sends a datagramPacket to Server which again processes the packet and sends it to Client1. May have Client 3 and 4 doing the same thing at the same time... and so on...
My root class is creating the datagramSocket(somePort) and two threads (receiver and sender). How can I use the socket that I created in these two threads??
I have done the following and I am getting "java.net.bindexception". When I am sending stuff from Client1 to Client2 everything is fine but when I start sending something from Client2 to Client 1, I get the bindexception... Client 1 is using port 3000, Client 2 is using port 4000.
I really don't have a lot of experience in socket programming so I am not sure if there is a much simpler way to do this. I appreciate all the tips and help that I can get...
Thanks...
class UDP_serv
     static DatagramSocket udpSocket;
     final static int SERVER_PORT     = 2000;
     public static void main(String[] args) throws SocketException
          udpSocket= new DatagramSocket(SERVER_PORT);
          new DataReceiver().start ();
          new DataSender().start ();
     static class DataReceiver extends Thread
          DataReceiver()
               Thread.currentThread().setName("DataReceiver");
          public void run()
               while (true)
                    byte pckt[] = new byte [MaxMsgSize];
                    DatagramPacket dp = new DatagramPacket (pckt, pckt.length);
                    try
                         udpSocket.receive (dp);
                         //PUSH TO RECEIVE BUFFER
                    catch(Exception e)
                         e.printStackTrace();
     static class DataSender extends Thread
          DataSender()
               Thread.currentThread().setName("DataSender");
          public void run()
               while (true)
                    processDataMsg();
      static void processDataMsg()
         DatagramPacket op;
         InetAddress DA = null;
         int DP = 0;
         byte [] outPacket = null;
         // POP FROM RECEIVE BUFFER
         // SOME PROCESSING HERE
         // Set Destination Address (DA)
         // Set Destination Port (DP)
         // DA and DP are the forwarding IP and Port addresses
         // not the addresses original packet was sent from.
         try
          op = new DatagramPacket (outPacket, outPacket.length,DA, DP);
          udpSocket.send(op);
         catch (IOException e)
          e.printStackTrace();
}Also for development and testing purposes, I am running the two clients and the server on the same machine (windows xp-32b) so all of the Destination IP Addresses are 127.0.0.1. and as I said Ports that I am using are 2000, 3000, 4000 (Server, Client1, Client2).

Hmm I have minimized the code and it seems to be working now.
I think I have an error in the header portion of the data I am sending, where I am storing the source IP/Port and destination IP/Port. I think the server in the middle is messing these values up while sending them to the destination Client. Because the destination client actually receives the stuff and sends the reply back to the server, but the reply packet's headers has 0/0 as the dest IP / Port...
Server is giving me java.net.BindException: Cannot assign requested address error when it tries to forward the reply it received from the client2 as the address it is trying to send is 0!
I guess it doesnt just give this error when you try to open two sockets to the same port...
Paul, Thanks for the direction on how to proceed... took me a while get the minimized code but at least figured out the problem. Well still have to make sure that is THE problem though :)
As far as the statics goes how can I change those to non static ones? Where do I make an instance of the top level class that creates the threads? and how do I pass the DatagramSocket to the threads/ if I dont need to pass how do I call or use the datagramSocket I created in the top level class? I mean do I still kinda have it like a global variable on the top?? A very simple example would be much appreciated...
I think these might be really basic questions but I am having a rough time with the hierarchy in java...

Can You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

How do You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

Move the files to the /Users/Shared/ folder and then to the other account's home folder.
(85927)

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Seperate Document Row with same account when post GL

Hello everyone
How I can seperate Document Row with same account when post GL
because If I post dcoument that have many rows but same account and difference detail. It will sum amount for same account in JE
and I found that will seperate if it has diference project code but it's not enough for me.
How I can config SAP B1 to seperate Doc row when post to JE if it has difference detail (as userfield or standard filed)
Sorry for my poor english
Thank,Seang

Hello Suthee,
Sorry to tell you, it is not possible to do so in current B1 without addon development.
There are 2 alternative.
1.Consulting Workaround:
Seperate the Item into 2 items, the account into 2 sub accounts.e.g.
Item A => Item A01 and A02
G/L Account 1001 => Sub Account 100101 and 100102
2.AddOn development to seperate the JE just after it is created document
You can update to JE to seperate just after JE are created by docuemnts.
Just Listen FormDataAdd Event.
Sample Code:
Private Sub FormDataEventHandler( _
    ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, _
    ByRef BubbleEvent As Boolean) Handles oApp.FormDataEvent
        'I just listen 133 - AR invoice here,
        'You may add the target documents
        'Before action = true, start the transation
        If BusinessObjectInfo.FormTypeEx = "133" _
                And (BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD _
                Or BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_UPDATE) _
                And BusinessObjectInfo.BeforeAction = True Then
            oCompany.StartTransaction()
        End If
        'Before Action = false,
        'Update the JE in document
        'Succeed, commit, otherwise rollback
        If BusinessObjectInfo.FormTypeEx = "133" _
        And (BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD _
        Or BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_UPDATE) Then
            If BusinessObjectInfo.BeforeAction = False And BusinessObjectInfo.ActionSuccess Then
                Dim xmlDoc As System.Xml.XmlDocument = New System.Xml.XmlDocument
                xmlDoc.LoadXml(BusinessObjectInfo.ObjectKey)
                Dim objectKey As String
                objectKey = xmlDoc.SelectSingleNode("//DocEntry").InnerText
                Dim oDocument As SAPbobsCOM.Documents = Nothing
                oDocument = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseOrders)
                If oDocument.GetByKey(CInt(objectKey)) Then
                    Dim oJE As SAPbobsCOM.JournalEntries
                    oJE = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries)
                    If oJE.GetByKey(oDocument.TransNum) Then
                        '*Add you code to Update oJE lines here*
                        lRetCode = oJE.Update
                        If 0 <> lRetCode Then
                            oApp.MessageBox("Failed to update JE")
                            'roll back the whole transaction, including the document
                            oCompany.EndTransaction(SAPbobsCOM.BoWfTransOpt.wf_RollBack)
                            Exit Sub
                        Else
                            'Commit the transaction
                            oCompany.EndTransaction(SAPbobsCOM.BoWfTransOpt.wf_Commit)
                        End If
                    End If
                End If
            End If
        End If
    End Sub
Hope it helps. Thanks.
Kind Regards
-Yatsea

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

How do i have CC on home and work computer with same account?

How do i have CC on home and work computer with same account?

Hi Markofm,
You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to De-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription. This is the same licensing between which we have for our perpetual product. An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
Thanks & Regards,
Sanjeeta

Logged with same account on 2 separate machines - ...

Hi there, appreciate if someone could clear this up for me. If I'm logged with same account in two separate places, while in a conversation - would you be able to see or hear the conversation on the computer, that's not the one I'm calling from? Thanks!

blaze64 wrote:
Tried to create account on new computer...
Don't "create" an account. On the new computer, just go to the command *Store > Authorize This Computer*, and authorize it to the existing account, using the existing ID and password.

2 Hyper-V Servers with Failover Cluster and a single File Server and .VHDs stored on a SMB 3 Share

I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs) and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs). I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
all .VHDs stored on a SMB 3 Share on the File Server.
The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
\\fileserver\shareforVHDs
It is possible? How Cluster will understand the
\\fileserver\shareforVHDs as a cluster disk and offer HA on it?
Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
Storage Spaces makes difference in this case?
All based on wind2012 R2 STD English version

I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs) and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs). I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
all .VHDs stored on a SMB 3 Share on the File Server.
The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
\\fileserver\shareforVHDs
It is possible? How Cluster will understand the
\\fileserver\shareforVHDs as a cluster disk and offer HA on it?
Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
Storage Spaces makes difference in this case?
All based on wind2012 R2 STD English version
You can do what you want to do just fine. Hyper-V / Windows Server 2012 R2 can use SMB 3.0 share instead of a block storage (iSCSI/FC/etc). See:
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
There would be no shared disk and no CSV just SMB 3.0 folder both hypervisor hosts would have access to. Much simplier to use. See:
Hyper-V recommends SMB or CSV ?
http://social.technet.microsoft.com/Forums/en-US/d6e06d59-bef3-42ba-82f1-5043713b5552/hyperv-recommends-smb-or-csv-
You'll have however a limited solution as your single physical server being a file server would be a single point of failure.
You can use Storage Spaces just fine but you cannot use Clustered Storage Spaces as in this case you'll have to take away your SAS spindles from your R720 box and mount them into SAS JBOD (make sure it's certified). So you get rid of an active components
(CPU, RAM) and keep more robust all-passive SAS JBOD as your physical shared storage. Better then a single Windows-running server but for a true fault tolerance you'll have to have 3 SAS JBODs. Not exactly cheap :) See:
Deploy Clustered Storage Spaces
http://technet.microsoft.com/en-us/library/jj822937.aspx
Storage Spaces,
JBODs, and Failover Clustering – A Recipe for Cost-Effective, Highly Available Storage
http://blogs.technet.com/b/storageserver/archive/2013/10/19/storage-spaces-jbods-and-failover-clustering-a-recipe-for-cost-effective-highly-available-storage.aspx
Using
Storage Spaces for Storage Subsystem Performance
http://msdn.microsoft.com/en-us/library/windows/hardware/dn567634.aspx#enclosure
Storage
Spaces FAQ
https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
Alternative way would be using Virtual SAN similar to VMware VSAN in this case you can get rid of a physical shared storage @ all and use cheap high capacity SATA spindles (and SATA SSDs!) instead of an expensive SAS.
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Can't setup MAIL account on iMac no IMAP server

Can't setup MAIL account on iMac no IMAP server. Says I have wrong SMTP server. I"m using a iMac version 10.9.4. MavericksHere is an example for you. I'm trying to set up Time Warner Cable mail account. I have Gmail, iCLoud and Yahoo mail. Any help is greatly appreciated.

Try setting it up with these servers: https://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e -mailacco/incoming-outgoing-server-addresses.html
You can edit the SMTP server by choosing Edit SMTP server list from the popup menu (Outgoing Mail server).

Multiple clients with same account on a single IMAP server

Similar Messages

Maybe you are looking for