Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Similar Messages

Reading & Writing files with same extension(like ".sas", ".txt" , ".csv",and ".log" in Adobe AIR

Hi Folks,
How to read & write files with same extension(like ".sas", ".txt" , ".csv",and ".log" in Adobe AIR.
Please let me tell if anybody knows asap.
Thanks & Regards,
Anderson

Thanks Jon,
But, I know how to read the file if we give exact file path
I need to get the path and read file(s) with same extension files in the same folder using adobe air, not single file.
Don't have file path even, i have folder path, in that somany files are there. So i need to get which are the same extension(Ex: ".txt", ".sas") files
If you have any idea , please help me out
Regards,
Vijay.

Receiving multiple files with dual extension using file adapter

Hi,
The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters. Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
Thanks in Advance
Manmadha

Hi,
Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
Reference links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
Regards,
S.Santhosh Kumar

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

Reading Multiple files of same kind wth File adapter urgnt plz solve this.

Hi evry one
i am new to BPEL and i am in need of file adapter functionality. I have a folder which has files of naming convention
NSD 123-222 090714T01:23:23 if i suppose i have some hundred files in that folder and i am pointing the file adapter to read files from that folder.The pois all the files have same naming convention with different time stamp and at the same time if all the files have same start name all of the files get picked up at the same time my concern here is if i want to process each file in a while loop as soon as the file get picked up according to the target schema.what can be the condition inthe while loop so that each file gets processed in the loop.
Is there any process where i can count the number of files in the folder so that i can make use of that count in the while process.The files in the folder are in xml format these multiple files of same target schema.
please help me in figuring out this issue.
Regards,
P

There is no direct solution in my opinion. What you can do is - write some java code (either embedded activity or through WSIF). In this code you access the directory and count the files, return that count to your bpel process...then use the while loop with sync read

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Multiple files with same name--- automatic renaming option??

I am trying to sort my files by adding multiple files to a single folder. However, many have the same filename, and I get the error " there already exists a file with the name "x", please choose another name" etc. I am dealing with thousands of files here that are very tedious to rename individually. Is there an option or program that either disables this block on multiple files with the same name in a common folder, or automatically renames the files as they are placed in the folder?

i would like all the files to have different names, but not have to do it myself. they are generated my my audio recorder, which automatically names files take1, take2, take3 etc. multiple sessions entail multiple folders, i am trying to consolidate.

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

File adapter(write files with same extension as we read them)

Hello
I am trying to read file as an attachment using file adapter (it can be of any extension .pdf,.txt,.xml)
I want to write this file using file adapter with the same extension i.e. whatever is read as it is....I am least bothered for reading the content inside the file so am reading it as an attachment..
Please if anyone knows the answer..reply....

I ran into a similar issue. As a workaround we ended up just using java to write the files out. When the File Adapter attempts to write out a file it first writes that file to a temp file and then copies that to the appropriate directory.
I believe that when two or more threads were attempting to write at the same time the write was failing for one (but appearing to work in the console logs). I think a race condition may be created when two threads attempt to write using the File Adapter for access to the temp file. I contacted my oracle rep about it but they are always pretty worthless so I havent ever heard anything back concerning the issue.

FileSelectPopup, discriminate multiple types with same extension

Hi,
When using a file select popup with multiple file types of the SAME extension, such as:
FileSelectPopup ("", "(8 bit)*.tiff", "(8 bit)*.tiff;(16 bit)*.tiff", "Save As", VAL_SAVE_BUTTON, 0, 0, 1, 1, file);
Is there any way to know which "save as type" was selected by the user on the popup?
(win7x86; CVI 2010)
cheers,
Diz
Solved!
Go to Solution.

I dodn't focused on the "save" option enabled.
In such a situation I would design a small options panel with abutton to select the destination filename using FileSelectPopup, a radio button or a ring to discriminate the file format and usual OK and Abort buttons.
This unless you can determine the final file format from the origin of your data (i.e. if you are saving a 8bit image, use 8-bit TIFF format and so on, provided you must not perform format conversion during save).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Multiple files (with same message type) into a single file

Dear All,
I am having multiple files(same message type) with details like header data and its line item details in each file. The structure of all the files will be:
File1    File2   File3
H1        H2      H3
L1         L1      L1
L2
L3
Now my requirement is that after every 10 hours all the files should be picked and merged (append) into a single file as target file. The structure of output file will be now like
H1
L1
L2
L3
H2
L1
H3
L1
Kindly guide on how to proceed on this with BPM or without BPM
Regards,
NJ

Now my requirement is that after every 10 hours all the files should be picked and merged
(append) into a single file as target file.
Check the use of "Availability Time Planning" of the adapter in your case
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
If your requirement is to append you can do so by using the File Construction mode as Append in receiver File adapter
If your req is to do a N:1 mapping (i.e. merger) then develop a mapping program accordingly...
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 3, 2009 10:30 AM

How to read multiple segments with same name in IDOC

I want to read segments in IDOC say e1edk02.I am using orders05 idoc.
BUT If I use the statement
CONSTANTS :
            c_segnam1     type char19 value 'E1EDK02'.
read table idoc_data into wa_idocdata with key segnam = c_segnam1.
It will read only one segment.but we are populating 2 e1edk02 segments.

LOOP AT IDOC_DATA
    WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
    CASE IDOC_DATA-SEGNAM.
      WHEN 'E1EDK02'.
       MOVE IDOC_DATA-SDATA TO E1EDK02.
reward if useful
check FM idoc_input_orders for reference

Unable to read multiple files in BODS

hi all,
i am unable to read multiple files [with same format of fields] using wild card characters in file name.
scenario:
i have 2 files: test1.xlsx & test2.xlsx
in the excel file format, for the file name column, i have given test*.xlsx.
and done the direct mapping to target column.
but when i run the job i am getting below error.
at com.acta.adapter.msexceladapter.MSExcelAdapterReadTable.ReadAllRows(MSExcelAdapterReadTable.java:1242)
at com.acta.adapter.msexceladapter.MSExcelAdapterReadTable.readNext(MSExcelAdapterReadTable.java:1285)
at com.acta.adapter.sdk.StreamListener.handleBrokerMessage(StreamListener.java:151)
at com.acta.brokerclient.BrokerClient.handleMessage(BrokerClient.java:448)
at com.acta.brokerclient.BrokerClient.access$100(BrokerClient.java:53)
at com.acta.brokerclient.BrokerClient$MessageHandler.run(BrokerClient.java:1600)
at com.acta.brokerclient.ThreadPool$PoolThread.run(ThreadPool.java:100)
please let me know if there is any solution to this.
regards,
Swetha

Hi,
i just copied a xlsx file with 3 different names (Test_Data.xlsx, Test_1.xlsx, Test_2.xlsx) and tried with below options and it worked for me.
Note: I tried on the same OS and DS 4.1 SP2(14.1.2.378)versions. In Linux File names are case sensitive.

Can't import RAW and psd file with same name different extension

Trying to import a folder of images from desktop that I have been working with in Bridge CS3.
LR won't import a RAW file that has a PSD file by the same name. Tried renaming the PSD and deleting the one with the same name, but says it is still there and won't import the RAW file - What is the correct workaround on this? Why can't it import same name files with different extensions?

A forum search for 'RAW + JPEG' will give you more posts on this than you care to read. This will change. For now, import the RAW and PSD's from separate folders and then move them together for within LR.
LR is seeing the RAW as a sidecar to the PSD. It is an unforseen effect of the RAW + JPEG thing where they decided to not import the JPEG, seeing it as basically a preview image for the RAW.
LOL
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

While saving multiple attachments from mail, files with same name are added and not replaced

While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

Read multiples files with same extension

Similar Messages

Maybe you are looking for