Multiple devices, Multiple devices

Hi,
I have FaceTime on my iPad 2 and on my Mac, once i receive an incoming call it rings only in one device which is not constant.
How do i change it for me to receive call for all iDevices?

See Here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Similar Messages

How do i manage multiple users and devices with one apple id without everything showing up on every device?

how do i manage multiple users and devices with one apple id without everything showing up on every device?

How to use multiple iPhone, iPad, or iPod devices with one computer

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Multiple Creative sound devices in one system

-Multiple Creative sound devices in one systemrHello community, I recently tried to get two X-Fi Titanium PCI-Express cards to work in one computer. One card worked well. As soon as i plugged in the second card and booted the system, i got a quite reliable bluescreen SYSTEM_EXIT_OWNED_MUTEX, which indicates improper handling of shared ressources by the driver. I performed extensi've testing on two different machines with both Windows 7 64-Bit and Windows XP 32, freshly installed and patched, latest drivers, no other software or sound hardware present, but the problem persisted. I contacted support an was told that a such a combination is neither tested nor supported by Creative. So now I am stuck with two expensi've cards, that don't work together. Is there any information from Creative which devices will work flawlessly together if combined? For example the X-Fi Go!. It's USB. How many of those will work together in one system? (if more than ) Can I plug in a Soundblaster Play USB device simultaniously? Does Creative test for things like these? And why ist there a "Select Audio Device" option in the Creative Console application if multiple cards don't work?

Hi Suresh
Generally it is not possible to activate two industry solution in
switch framework .(transaction SFW5) ..But we can make the activation
of industry solution as client dependent and client independent . if we
make it as client dependent then we can activate different industry solution
for each client
To know whether the activation is client dependent or client
independent you need to check table SFWPARAM for any entries. If it
does not have any entry then its client independent (repository changes)
It affects all the clients. Please make entry in table SFWPARAM
and try !
I hope this information helps
Regards
VV

A Verizon cellphone tower in my area is feeding multiple Verizon Customers / Devices with the incorrect time (one hour behind) when we are in range of this tower

A Verizon cellphone tower in my area is feeding multiple Verizon Customers / Devices with the incorrect time (one hour behind) when we are in range of this tower (in this specific area). Our phones show the correct time in other areas. Is there a way to fix or report this?

The zip code that this is occurring in is: 87102
Specifically when I am at
1001 Woodward Pl NE
Albuquerque, NM 87102
Upon further investigation, it is happening to anyone with a Verizon handset, regardless of specific device. I have a Samsung Galaxy Note 3, and my co-worker has a Motorola Droid Turbo and we are both having the issue. Anyone on a different carrier (T-Mobile, AT&T) is fine, and is not experiencing this issue.
It actually looks like the cell tower is feeding us the correct time, but its like it forgot daylight savings happened. So it is feeding us the incorrect time zone/day light savings information.
When I goto Settings -> Date and Time on my Android device, I have both "Automatic date and time" and "Automatic time zone" checked.
the "Automatic timezone" it is pulling from the Verizon cell tower is "Mountain -7". It is correct that we are in the "Mountain" timezone, but we are currently "Mountain -6" (also known as day light savings). So the Cell Tower things it MST when it should be MST DST
When I uncheck "Automatic time zone" and select my own, suddenly it lets me select "Mountain -6" and doesn't even give me the option of "Mountain -7".
So in conclusion, some cell tower in the area of zip code 87102 forgot that daylight savings ever happened, and is telling cellphones they are in the "Mountain -7" timezone, instead of the correct current timezone of "Mountain -6 DST"
Edit: Oh, sorry, and to answer your question, it began happening about 3 weeks ago. We started noticing around March 25th, maybe a little after that.

Multiple audio playback devices

I have just built a system using the K7N2-L mainboard and am having a problem with multiple audio playback devices.
Actually I have TWO problems, which are probably unrelated.
I have a 5.1 speaker system connected to the onboard audio and an external USB DAC for playback through a hi-fi system.
The first problem is that the USB audio device is only recognised if it's plugged in after the system is booted. If it's already attached when I power up, it appears not to be properly installed.
The second problem is that when I use the Sounds and Multimedia control panel to switch audio devices (Windows 2000 pro) playback continues through whichever device was used first. In order to switch, I have to reboot the computer.
Another system I built using an Epox nforce board does not have this second problem, although it does have the first. With the Epox board, I can even play through both devices simultaneously.

I gathered this from the handbrake side of things:
You can also combine Pro Logic II and AC3 pass-through. This will give you a file that will play anywhere from QuickTime to VLC to the iPhone (using the AAC Pro Logic II track) and play in true surround sound on an AppleTV or in Perian. It is the best of both worlds, and it is only possible in the .mp4 and .mkv containers. Again, MP4 file names must, confusingly, end in .m4v for QuickTimeto read them. To use this hybrid format, in the Audio tab, set the first audio track to be the track you want, in AAC sound. Then set the second track to also use the same source track, and select AC3 pass-through."
I think this is what will ultimately help me. I will let you know.
the answer was righ under my nose.
Thank you!

My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod

Hi i just synced my iphone to my new laptop ive lost all my ringtones and i tried to buy anouther and it says tones are not available on this device, a device that can run i0s 5.0 or later is required please help :(

hi i just synced my iphone to my new laptop ive lost all my ringtones and i tried to buy anouther and it says tones are not available on this device, a device that can run i0s 5.0 or later is required please help

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

What is icloud setup for Multiple users, multiple devices in family?

What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?

I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first.

Unable to initialize capture device and device control in HDV

I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
Im at my wits end, Ive been working on this for a whole week now.
Thank you,
Bugs

It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
x
To do a full quicktime reinstall.
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
If this doesn't work, then the problem lies elsewhere:
1. your system - user preferences, firewire ports or other system elements.
2. your equipment - camera/deck/firewire cables.
3. your process - not setting up the software properly or using the software erroneously.
Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
Troubleshooting Steps for OS X
by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
FIRST AID
01 Completely shutdown, wait a 5 minutes, restart
02 Make sure you're not running out of free space on the System volume
03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
04 Repair permissions using Disk Utility
05 Create a new user account, and see if the problem persists there
06 Clear system & user caches
07 Run FCP Rescue
08 Unplug all USB, Firewire devices except Apple mouse
09 Startup in SafeBoot mode, and see if the problem persists there
10 Reset system firmware
MORE SERIOUS TROUBLESHOOTING
11 Reapply the latest combo updater
12 Run the Apple hardware diagnostic CD
13 Check the hard drive for bad blocks
14 Take out 3rd party RAM
15 Unplug 3rd Party PCI cards
16 Reset PMU
17 Archive and reinstall the OS
18 Reinstall the system from scratch
19 Send the machine back to Apple

One premium account and multiple Skype HD devices

Will one Premium account and multiple non premium HD accounts work for video calling? Basically the idea is 10 HD skype devices, the set top boxes connected to tvs will dial into one Premium Mac or PC account for multiple video conferencing.

Yes, one user needs to have a Group Video Calling subscription.
Unfortunately, not all devices support Group Video calling (TV's for example, do not).
Please see our website for more information: http://www.skype.com/en/features/group-video-chat/.

How do i set up multiple iPod touch devices

Both my children have iTouch devices and they are setup under my account
How do i seperate

See the following:
How to use multiple iPods, iPads, or iPhones with one computer
Just why do you want to seperate them? One one you can add another Messaging and FaceTime messaging/calling email address and delete the Apple/iTunes ID emasil address.

Multiple Users, Multiple iPods sync problem

At home my iMac is set up with multiple accounts for my family members, 2 have iPod Nano's and I've an iPhone. Each of us has our own iTunes library. Now, a lot of the time I will stay logged in and just return to the log in window. Same goes with the kids who do the same (Time limited accounts means this happens quite often as they don't get logged off automatically).
Up until 9.1 iTunes (I think, could have been 9.0) everything worked fine. I would leave my iTunes running constantly - this allowed me to stream over to our Airport Express units using the iPhone Remote app whenever I felt the need.... However, we've now run into a problem.
More often than not my daughter will log in, dock her iPod and it won't show up on her iTunes - instead I have to switch to my user account where I'll find it showing up on MY iTunes! I then have to shut down my iTunes to allow her to sync her iPod with her iTunes.
This didn't used to happen, it used to be that the user who was CURRENTLY logged on would get the plugged in iPod but that appears to be totally broken - I can't find any documents that say this is the way it was meant to work, searching the 'net for multiple users, multiple iTunes turns up so much that it's impossible to find any related issue.
Is anybody else noticing this? Am I doing something daft wanting to use iPods & iTunes like this? Any suggestions on how to fix the issue?
Thanks for any help!

Chris CA wrote:
it used to be that the user who was CURRENTLY logged on
But according to your post, other users are still CURRENTLY logged on.
Ok, so 'logged on' is vague, the other users are still logged on. I mean the user that has the desktop focus. The active user.
a lot of the time *_I will stay logged in_* and just return to the log in window. Same goes with the kids who do the same (Time limited accounts means this happens quite often as *_they don't get logged off_* automatically).
You can set System prefs - Security to log users off after xx minutes of inactivity.
Yes, you can, but that does not solve the issue on 2 levels:
1. If I did that then I couldn't leave my iTunes logged in to be able to stream from it to my Airport Express units. I'd have to manually go to the iMac and log myself in - which would kinda defeat the benefit of being able to control this all remotely as I've been doing perfectly happily for the past couple of years. 9 times out of 10 I don't want to be logged off for any number of reasons.
2. As I said, some members of the household have Time Limits on their accounts via Parental Controls. This does not log users off, it merely drops them back to the login window. There is no way that I know of setting this up to actually log off. As a side issue, it'd be great if I could specify that for certain members of the family who use up all their time and get pushed back to the login window with Flash games running in a browser window consuming CPU unnecessarily... but that's a side-issue.
You can send suggestions for iTunes here -> http://www.apple.com/feedback/itunesapp.html
Um, ok, great, suggestion: Make iTunes work the way it used to work please . Seriously though, this is not a new feature request, I want to see if other people have experienced this and if there is a work-around out there.

Multiple users and devices, one account

I have an iPad 1 and iPod Classic. My wife has an iPhone 4s and an iPod Touch. Sonny boy also has an iPod Touch. They are all linked to my apple id and account. How do I separate the account so that we can each manage our own devices from our single PC?
Though my wife has her own apple ID and account, everything is apparently linked to my account.
How can I set things up so we each manage our own devices, libraries, downloads, and accounts?

Yes, it does. Method one. Multiple Windows User account - to create different Windows User account for your wife and you son. You already have your windows user account, you just need to add two more. - Go to Windows Control Panel, Users and add user.(remember to choose Administrator instead of standard user).
Each of you will log in to your own windows user profile to manage your own iTunes library, account and sync devices.
e.g. Windows startup screen for multiple User profile.

Qosmio X770: 4 nVidia HD audio devices in device manager

So i have a few questions...
In my device manager i have [this (screenshot)|http://i.imgur.com/NfH5E7p.jpg].
So i have (!) 4 nvidia hd audio and 1 hd realtek audio.
I usually update my nvidia video driver and nvidia hd audio driver is updated every time with it.
But not long ago i decided to find any other updates to my drivers, cause bloody toshiba (we call it that way in Russia) is too lazy to support their laptops. And [found this:(realtek hd R2.70 codec driver )|http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false].
Installed it, everything is working fine so far. It is for realtek alc269 (and also many other devices, but for us only alc269 matters) which is the real name of realtek hd audio device in x770 laptops (i checked in program aida64, previously known as everest).
So now i have [this (screenshot)|http://i.imgur.com/6HM5mLj.jpg]: version 6.0.1.6662 date 19.06.2012
The previous version that lazy toshiba was glad to provide us with - 6.0.1.6360 [(screenshot)|http://i.imgur.com/dUQiPA0.jpg]
So the questions are:
1. Why i have FOUR nvidia hd audio devices in device manager?
2. How can i make nvidia hd audio my primary audio device? Or maybe they are some kind of virtual devices or smth like that.
3. Do you think the idea of installing driver directly from realtek website was bad? There is a disclaimer on their site: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
So i invite everyone to test this audio driver with me :)
And a few more things.
In one topic i found this info: moreover, myself and other users of this forum have overclocked their cards from 657/1300/1200 to 800/900/1600 and are very pleased with the results, so try not to overexaggerate
(it is a quote). So I will be happy if someone gives me link to some kind of manual about overclocking 560m gt from our beloved x770.
Also I found a lot of topics about nvidia drivers with angry customers. I don't remember when i first updated video drivers, but i've never had problems with them. When the situation changed? As far as i can understand in 2011 you could't install nvidia drivers directly from nvidia website.
P.S. sorry for my english, i'm from Russia. Also there is some russian on screenshots, hope it won't make your eyes bleed.

At first i want to "thank" moderator about renaming my topic. Original name was: realtek vs nvidia hd audio x770 + update r2.70 question. Where is 2.70 part in the current name? Ok.
Second. To Tonny: I'm not lame user, no need to explain me obvious things).
> {quote:title=Tonny wrote:}{quote}
> > How can i make nvidia hd audio my primary audio device?
> I dont understand why you want to make an device primary?
> What is the purpose for that?
>
> If you want you can set the sound devices as default device in Control Panel -> Sound -> Playback tab
> Click on the device and choose default.
If there is nvidia hd audio device and it's not some kind of virtual device or controller, i want to test it like primary audio device. Simple curiosity. I love flac etc.,
So I always try to improve sound. And alc269 we have in x770 is also installed in my ANCIENT asus eee pc, so it's very depressing. Also your advice about control panel - sound is not working, i think you know why... There's only speaker device working on realtek hd audio.
> {quote:title=Tonny wrote:}{quote}
> You can use the driver from Realtek since the sound chip is from Realtek.
Yep, of course, but it's my 5th laptop and also i have 2 netbooks (i'm speaking only about portative devices, not pc). I tried to update drivers manually numerous times on my previous devices, and I learned a lesson, that if you install new driver (not from you laptop/whatever support page, but directly from device manufacter's website ) and even if you are absolutely sure that driver is compatible with you device there can be problems. For example, as i've already said realtek alc269 is installed in my qosmio x770 and in my super old asus eee pc. And driver is the same.
Also realtek driver support page has disclaimer: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website. (already was in op-post).
So I only tried to hear from those who has already installed r2.70 realtek update or maybe tested it some way. But the moderator made it impossible renaming the topic.

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

Multiple devices, Multiple devices

Similar Messages

Maybe you are looking for