Multiple document upload
Hi,
My requirement is uploading multiple documents into the database as BLOB objects. I am using a java servlet.
My problem is - Word documents are uploaded properly but the excel file is getting corrupted on upload. Moreover for text files, the last line of the file is not being written.
Any code for upload available?
Suggestions if any.
Thanks well in advance,
Hi,
in my fileupload.JSP, there are 5 rows.... with each row having
i) file select (file)
ii) file descr (text)
iii) upload to (text).
org.apache.commons.fileupload is using the request part to iterate or list the files that need to upload. But in my case am not only uploading the file, i need to process other fields also.
Help me on this.
Thanks,
Kumar.
Similar Messages
-
Multiple Document Upload disable in ribbon
Hello,
Recently i have been facing this issue. I am working on sharepoint 2010 having office 2013 nd IE 8
When am opening any document library to upload multiple document, I found that its disable.
Need your help to sort out this.
ThanksHi Rachana,
Not required. You can access the Office 2010 files(word/excel/power point ...etc) directly by using the client browser. Whenever user clicks on the office documents in SharePoint site,office files will get open in the browser and so user is
not required to install Office 2010 in his/her system.
Can refer the below link on how to Enable that option.
https://www.nothingbutsharepoint.com/sites/eusp/Pages/How-to-Open-SharePoint-Library-Files-in-the-Client-Application.aspx
Note: I assume Office Web Apps for SharePoint 2010 is installed and configured in your farm. Can refer this link for more information.
http://sharepointgeorge.com/2010/installing-office-web-apps-for-sharepoint-2010/
Please remember to click 'Mark as Answer' on the answer if it helps you..
Best Regards,
Pavan Kumar Sapara.
s p kumar -
Uploading Multiple Documents To a List Item sharepoint 2010
hi Guys ,
Is there a way we can enable (out of the box )Uploading Multiple Documents To a List Item sharepoint 2010 ?
cheersNo, There is no OOB way to do the same you have to build a custom Page/Control OR customise OOB Form to attache multiple files and that will be through integration of ajax based control (multiple file uploader.)
the other way to do the same is provision a custom field. we have done this for our many clients.
Hi, I also encountered the same problem, could u pls provide detailed information by a custom field? -
hi ,
i am trying to upload multiple document files into sharepoint list item. I followed below link for implementaion.
http://techfindings-prem.blogspot.in/search/label/jquery.multifilejs
It was working for sharepoint hosted app.
This complete code is written within content edito web part.
It was working when i was in root site collection with below change (hard coded the root level url) in code in "UploadFile" function.
var scriptbase = "http://servername" + "/_layouts/15/";
console.log(' File size:' + bytes.length);
$.getScript(scriptbase + "SP.RequestExecutor.js", function () {
var createitem = new SP.RequestExecutor("http://servername");
createitem.executeAsync({
url: "http://servername/sites/cpg/" + "/_api/web/lists/GetByTitle('SalesRecord')/items(" + attachmentitemid + ")/AttachmentFiles/add(FileName='"
+ fileName + "')",
method: "POST",
binaryStringRequestBody: true,
body: binary,
success: fsucc,
error: ferr,
state: "Update"
function fsucc(data) {
//alert( data.statusText + "\n\n" + data.responseText);
console.log(data + ' uploaded successfully');
deferred.resolve(data);
function ferr(data) {
//alert( data.statusText + "\n\n" + data.responseText);
console.log(fileName + "not uploaded error");
deferred.reject(data);
But the issue came in picture when i was working with the other site collection instead of root one. The url was like below.
"http://servername/sites/cpg/". This time i need to be there within "cpg" site collection.
Now if i hard code the url as i did above my code gets break here while come to below line
$.getScript(scriptbase + "SP.RequestExecutor.js", function () {
I am getting error when i used below code:
var scriptbase = "http://servername" + "/_layouts/15/";
$.getScript(scriptbase + "SP.RequestExecutor.js", function () {
var createitem = new SP.RequestExecutor("http://servername");
createitem.executeAsync({
url: "http://servername/sites/cpg/" + "/_api/web/lists/GetByTitle('SalesRecord')/items(" + attachmentitemid + ")/AttachmentFiles/add(FileName='"
+ fileName + "')",
method: "POST",
binaryStringRequestBody: true,
body: binary,
success: fsucc,
error: ferr,
state: "Update"
function fsucc(data) {
//alert( data.statusText + "\n\n" + data.responseText);
console.log(data + ' uploaded successfully');
deferred.resolve(data);
function ferr(data) {
//alert( data.statusText + "\n\n" + data.responseText);
console.log(fileName + "not uploaded error");
deferred.reject(data);
Please hekp in this case. This complete code is written within content edito web part.
Regards:
Sanjay JoshiHi,
According to your post, my understanding is that you have an issue about upload multiple documents files into library vai REST API.
As you have said, you have used the hard code url in your code.
How about use the _spPageContextInfo.webAbsoluteUrl method to get the url?
I have used this method to get the url, then use the code in the article you have pasted within a content editor web part to upload the files.
You can replace the hard code url with the _spPageContextInfo.webAbsoluteUrl method, then check whether it works.
Thanks,
Jason
Jason Guo
TechNet Community Support -
Upload Multiple documents in SharePoint document Library not working
Hi All,
I have folder on my desktop which consists of nested folders and files(Total 11 files) .And when I select "Upload multiple files" option to upload documents and drag the folder from the desktop in pop-up window .
The sharepoint document library uploads only 1 file among all the nested folders from 11 files.Can any one help me how can I solve this
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .Hi,
I understand you encountered the issue when use "Upload Multiple Documents" to Drag Files and Folders to upload window.
When you say "The sharepoint document library uploads only 1 file among all the nested folders from 11 files", do you mean you have drag all files and folders to the window, while only 1 file is uploaded sucessfully? Or you cannot find all expected
folders and files?
Please manually open "Windows Explorer" to locate files and drag files from "Windows Explorer", instead of using the "Open window"
opened by "Browse for files instead" as below:
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Upload multiple documents option is not visible for one user in SharePoint 2007.
Hi,
For one user Upload multiple documents option is not visible.
We are using SharePoint 2007 environment.
User is using IE 9 32 bit,Office 2010.
I did repair office 2010.
Active x controls are enabled.
Please anyone help me on this.
Thanks,
AshokHi,
According to your post, my understanding is that after client upgraded to Office 2013 the option for Upload multiple document was grayed out.
I try to reproduce the issue in my environment, however everything works well.
My configuration of system is:
Windows 8.1;
IE11;
Office 2013 32bit.
Please repair the Office 2013 to check whether it works.
In addition, there are many thing you need to check. Please refer to:
http://sharepointknowledgebase.blogspot.com/2013/09/upload-multiple-documents-is-disabled.html
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
More information:
"Upload Multiple Documents" is disabled in Document Library
SharePoint 2010 : How to Enable Uploading Multiple Documents Functionality
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
STSUPLD.DLL not recognizing as an add-on; upload multiple documents disabled
On my client system, Windows XP, Office 2007 and IE8 is installed. It is a 32 bit system. On the Sharepoint site, "upload multiple document" feature is disabled. After searching for the cause, I came to know about the STSUPLD add-on that needs
to be enabled otherwise it remains greyed out. So I copied the DLL file to C:/.../Office12/STSUPLD.DLL
IE does not detect any add-on when I start a new browser session. Between copying the DLL, and starting a new browser session, followed by checking Tools-->manage add-ons, am I missing an important step? (like installing...etc.)
Thankseasy way is, if you can install the Office client on the server, the control will be available.
also check this post for further detail:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Uploading multiple documents using file upload option
Hi,
I am new to BSP in file upload.Here i am trying to upload documents and Archiving the documents.At one time i am able to uplaod one document.Is there anyway of uploading of multiple documents from the same File upload control in the same session.and keeping the documents that uploaded in the page.
Hope you will answer.Need urgent reply.
Regards
Usmanbefore answering your question, a request
can you reply/award points/close previous thread opened by you.
coming to your question, check out the below given link.
http://www.15seconds.com/issue/990723.htm
Regards
Raja -
Help Required - Upload Multiple Documents functionality sometimes disappears in SharePoint 2010
Hi All,
We have a web application created in SharePoint 2010 & there we were facing an issue of not able to Upload multiple documents. After doing search on google, we have found that
pre-requisites for this functionality to be working properly are as follows:
Client Integration needs to be enabled for the web application.
The STSUpld.UploadCtl IE add-in must be enabled. (located in C:\Program Files (x86)\Microsoft Office\Office12)
The 32 bit version of Internet Explorer. The 64 bit version does not support it and neither do other, non IE, browsers.
Office 2003 or newer on the client.
After meeting all the above requirements, We are now able to see the Upload Multiple Documents link but we are failing in below 2 scenarios:
On some machines it is working fine & on some it is not.
On some machines, this option is available for sometime & sometimes it disappears.
If any one of you have experienced the same problem, then please help us with your valuable suggestions & possible solution for it.Hi Manish,
We've just been experiencing your initial issue with Office 2007 clients not being able to use the multi-file upload functionality. Sure enough....turning on presence information in Central Admin fixes the issue. The strange thing is though that
when presence is turned off, Office 2003 and 2010 clients still work fine and it's only 2007 clients that fail. Also this issue appeared to only exist for us inside applications that have been upgraded from MOSS2007 to SP2010. Any new applications
of even new site collections within an upgraded application worked fine across all 3 Office versions.
Coincidently, we're also experiencing the more recent issue you've come across with files not uploading after clicking OK in the ActiveX. Nothing happens. Office 2010 clients work fine but 2003 and 2007 clients just don't upload the selected
files. We've found a workaround which "fixes" the issue but brings it's own set of problems so it's not ideal. Here's what we've done...
1. Open IIS, and navigate to the web where you want to use multi-file upload
2. Select Handler Mappings and Add Script Map
3. Set Request Path - shtml.dll
4. Set Executable - C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI\SHTML.dll
5. Set the name to something meaningful - Multi File Upload
6. Leave the Request Restrictions as default
This should fix the issue with files not uploading but unfortunately it also prevents SharePoint Designer from accessing the site. For the application where we desperately need multi-file upload we can manage without SPD access so it's not the end
of the world but not ideal. We've actually got an outstanding incident logged with Microsoft to resolve this issue but they've yet to find a solution for us. We suggested to MS that we update authentication to Kerberos from NTLM and retry as we
seem to be getting 401 errors in the call stack so thought that could be related. We've not yet configured Kerberos so I'm not sure whether this is a solution or not.
One other point worth mentioning is that SharePoint Designer 2010 (which is free) installs the latest version (14) of the Upload ActiveX and with this installed the uploads work as expected. Also if you have Silverlight and SPD2010 installed then you
get a Silverlight control to do the upload which also works fine. Again, not ideal as rolling out SPD 2010 to affected clients isn't really a suitable solution.
Sorry I can't be any more help. Hopefully my findings might point you in the right direction. If you do find a solution (other than the IIS handler mapping) then please re-post here,
Good luck,
Ben -
Can't see 'Upload Multiple Document' option in sharepoint 2013
After upgrading Sharepoint 2010 to 2013, i can't see 'Upload Multiple Document' option under files tab. I have downloaded and place the file 'STSUPLD.DLL' into Office14 and Office15 folder but IE is not asking me to run any microsoft ActiveX control as mentioned here
http://thuansoldier.net/?p=2289
I am using Office 2010 with IE9 (32 bit) .
Am i missing anything ?Hi,
According to your post, my understanding is that you could not see the “Upload Multiple Document” option in SharePoint 2013.
In SharePoint 2013 the “Upload Multiple” Options has been depreciated. As we all known, there are two alternative ways to Upload multiple documents:option
1 - Using the drag-and-drop functionality, option 2 - Windows Explorer view.
You can upgrade your IE from IE9 to IE10 then check whether it works.
You can also use the Windows Explorer view to upload multiple documents.
You will probably get the following error.
To resolve this add the SharePoint site as Trusted in your Browser and Make sure that the WebClient service is running. To do this, follow these steps:
Click Start, click Run, type services.msc, and then press Enter.
In the list of services, locate the WebClient service, and then make sure that its status in the Status column is set to Started. If its status is not set to Started, double-click WebClient, click Start, and then click OK.
Once done restart the browser and try opening the Windows Explorer again. In the Windows Explorer you can copy and paste Multiple documents as done in earlier SharePoint versions.
For more information:
http://www.learningsharepoint.com/2012/11/29/how-to-upload-multiple-documents-in-sharepoint-2013/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Multiple file uploads, or only one at a time?
I have multiple files in folders on my iPad. I want to upload entire folders of documents. So far I have only been able to upload one document at a time. Then after uploading, I have to put them in acrobat.com folders one document at a time. It is very time consuming. Is there any way to upload multiple files at one time? Once the documents are uploaded, is it possible to move multiple documents into a folder at one time? Or does each document have to be a separate upload action, and each move into folder a separate document-by-document one at a time?
On my iPad I have been opening and saving pdf's in Adobe Reader. I would like to upload these pdf files from the iPad Adobe Reader to acrobat.com. I have thus far been uploading them from the iPad one fie at a time. It is very slow and tedious. There is also no way to get multiple pdf files from the iPad Adobe Reader to a computer except one file at a time. So it seems that once I used the iPad Adobe Reader app to save the files, I am stuck with one file at a time movement. I did, however, find that once I get files to acrobat.com, I can move multiples files at a time into folders on acrobat.com via the iPad. The problem is getting them uploaded from the iPad Adobe Reader app to acrobat.com. Is there a solution I'm missing, or am I correct in my understanding of the iPad Adobe Reader app upload situation?
-
DMS Document upload: does it pass through sap DMS ?
Dear All,
We have a question concerning the transmission of documents from the client to DMS and the Content Server: does the document need to pass through the sap server ?
Document upload (create document CV01N)
Does the document go directly from the client to the Content server OR does it pass through the sap DMS before to be stored in the CS ?
Document download (read document CV03N)
Does the document go directly from the CS to the client OR does it pass through the sap DMS server ?
This could be interesting to know for network performances.
best regards,Hi Gurus
is the cache server a default funtionality from the content server or any configuration is required from our part.
is that the cache server acts as the RAM of our system?
please explain the partitioning or biferfication of the Content server, as you told
content server is divided into storage catagories and this in turn in to content repositories,
please clarify below points,
1)any server or PC can be made as Content server by insatalling the content server CD if iam right ?
2) Practical and funtional benifits of partitioning content server into content repositories is it for authorization and storing data by naming convection or can it also help in copiying data from a specific content repository if needed, ( is content repositories a logical partition or practical partition like B,C,D, F drives of our PC hard disk)
3) can /should there be multiple content server installation for a particular (production) client.
4) Can Archiving be done say by creating a separate content repository inside the same Content server, or is it mandatory to have a separate archiving server itself,
please give some idea with examples
Thanks and regards
Kumar -
Multiple File Upload With Metadata Using REST
hi all
I want to upload multiple files with metadata to document library using REST API. I am using this msdn article
http://msdn.microsoft.com/en-us/library/office/dn769086(v=office.15).aspx for uploading file. I am able to upload single file to document library but it is not working for multiple file. when I select multiple file it is uploading last selected file. can
anyone help with this. I am using office 365 environment.
Thanks in advanceHi,
According to your post, my understanding is that you wanted to use the REST to upload multiple files.
Per my knowledge, the REST API is not supported for uploading multiple files via a single call.
You can write your own loop to upload multiple files via an individual call.
http://sharepoint.stackexchange.com/questions/108525/multiple-file-upload-with-metadata-using-rest/108532#108532
More reference:
http://sharepointfieldnotes.blogspot.com/2014/04/uploading-documents-and-setting.html
http://www.shillier.com/archive/2013/03/26/uploading-files-in-sharepoint-2013-using-csom-and-rest.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Unable to browse for multiple file upload
SharePoint 2010, Windows 7 Enterprise 64bit, IE 11 32bit - on this PC i have 1 user who does not get the option to browse and select multiple files to upload to a library. I can log on to the same PC and do that function no problems.
I have checked all the things in other posts like the stsupld.dll version, trusted sites, active X, compatibility mode etc etc.
The upload multiple documents is not greyed out and this user has been able to do this before on a different PC which is same desktop SOE. Appears to related to part of the users profile maybe in the appdata.
Scratching the head now and not sure where to look next.
Any help appreciatedHi,As you said is correct.It seems the issues is with the user profiles in the PC.I think no use of removing the user from site collection and re-added back also because,As you said he can able to Do the same function in different PC.I would suggest
to re-add the user in PC.
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Need Code For PO-GR through MiGO for multiple documents through BAPI
Hi All
Im using BAPI_GOODSMVT_CREATE to post goods for PO-GR.
When im posting multiple documents its giving error.
When im posting individually, it's working fine.
Please send me the code for PO-GR through BAPI.
Urgently required.
Regards,
SImha.Is this not working???
BAPI_GOODSMVT_CREATE to post Goods Movement
The following is an abap program making used of the BAPI function BAPI_GOODSMVT_CREATE to do Goods Receipts for Purchase Order after importing the data from an external system.
BAPI TO Upload Inventory Data
GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
02 - MB31 - Goods Receipts for Prod Order
03 - MB1A - Goods Issue
04 - MB1B - Transfer Posting
05 - MB1C - Enter Other Goods Receipt
06 - MB11
Domain: KZBEW - Movement Indicator
Goods movement w/o reference
B - Goods movement for purchase order
F - Goods movement for production order
L - Goods movement for delivery note
K - Goods movement for kanban requirement (WM - internal only)
O - Subsequent adjustment of "material-provided" consumption
W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
errflag.
data: begin of pcitab occurs 100,
ext_doc(10), "External Document Number
mvt_type(3), "Movement Type
doc_date(8), "Document Date
post_date(8), "Posting Date
plant(4), "Plant
material(18), "Material Number
qty(13), "Quantity
recv_loc(4), "Receiving Location
issue_loc(4), "Issuing Location
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
del_no(10), "Delivery Purchase Order Number
del_item(3), "Delivery Item
prod_doc(10), "Production Document No
scrap_reason(10), "Scrap Reason
upd_sta(1), "Update Status
end of pcitab.
call function 'WS_UPLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'. "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind = 'B'.
itab-plant = pcitab-plant.
itab-material = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
itab-move_type, itab-entry_qnt, itab-entry_uom,
itab-entry_uom_iso, itab-po_number, itab-po_item,
pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gmhead
goodsmvt_code = gmcode
TESTRUN = ' '
IMPORTING
goodsmvt_headret = mthead
MATERIALDOCUMENT =
MATDOCUMENTYEAR =
tables
goodsmvt_item = itab
GOODSMVT_SERIALNUMBER =
return = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
write:/'Error in function', errmsg-message.
errflag = 'X'.
else.
write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
write:/ 'Error in updating'.
exit.
else.
write:/ mthead-mat_doc, mthead-doc_year.
perform upd_sta.
endif.
endif.
FORM UPD_STA *
form upd_sta.
loop at pcitab.
pcitab-upd_sta = 'X'.
modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
endform.
*--- End of Program
REgards,
Ravi
Maybe you are looking for
-
Bug : Customizing af:query component
Hi, I am using jdev 11.1.1.6.0 version. I want to know how i can customize the error messages displayed by an af:query component. Example: suppose i am using advanced search on a field called productId. The search criteria used is 'Between' and if i
-
I am trying to send an attachment of design to a client at 778kb and she is receiving it as 1kb what am I doing?
-
No Quicktime 1920 x 1080 export
I have a 1440 x 1080 project and I'm trying to export it as a H.264 file 1920 x 1080. The export movie function will not allow this, nor will Adobe Media Encoder. CS3 stops encoding and will give me the following errors. "No Output Generated!" "Premi
-
Apply Filter to Tables for LAST_DDL_TIME doesn't work.
I'm trying to apply a filter to the table listing for a user (me!). Opening the dialong box I choose LAST_DDL_TIME for the column, ">=" as the operator and type in "(sysdate - 30)". Even though the tree listing says "Tables (Filtered)", I still see a
-
Web page disappears now in IOS7
since downloading ios7 my ipad 3 sometimes when browsing a webpag just jumps back to homepage & the page I was looking at has disappeared? What are Apple playing at with this crap? we should at least have to option to revert to version 6!