Multiple Domains with one single Portal

We have installed Oracle Infrastructure and Oracle Midtier on one box. Let's say the domain name is http://www.abc.com. When we query http://www.abc.com, it
goes to the SSO (Infra) and validates the username and password and takes it back to the Mid-Tier Portal Pages. At this junction, everything is working as expected.
Now, we created two more webpages and they correspond to two domains -- let's say http://www.pqr.com and http://www.xyz.com. The two webpages that got created were PUBLIC pages, so anybody can have access to those pages.
Can we implement our requirements using one infrastructure and one midtier (1st)installation? OR do we install two more midtier (2nd, 3rd) to correspond
to each domain name which are www.pqr.com and www.xyz.com and then have the proxy server redirect the request for www.abc.com to 1st-Midtier, www.pqr.com
to 2nd-Midtier and www.xyz.com to 3rd-Midtier?
We have a apache proxy server installed in front of the 9iAS, but we are going to use it just for redirection.
I understand Oracle Infrastructure has only ONE portal Schema and so how would multiple midtier (webpages) will reside? Do I need to create another PORTAL repository and a new DAD, so that www.pqr.com points to the 2nd-Portal Repository and www.xyz.com points to the 3rd-portal?

Through a single mid-tier it is possible to configure Oracle HTTP Server/Web Cache such that they are configured to handle multiple logical site names (e.g. www.pqr.com and www.xyz.com) by using Virtual Hosts.
In terms of a single Portal Repository being accessed by multiple mid-tiers (or logical sites), this is not currently possible since the Portal Repository is configured with only one set of site details.
For further information on configuring Virtual Hosts and Portal see the Advanced Chapter of the 10g Portal configuration guide...
http://download-west.oracle.com/docs/cd/B10464_01/portal.904/b10356/cg_advnc.htm#1040267

Similar Messages

Select or deselect multiple rows with one single selection event

Does anyone know how to create a JTable which can select or deselect multiple rows with one single selection event in JTable. Fore example, if the table has
row1
row2
row3
row4
row5
row6
What I need is when user select row1 or row2, both row1 and row2 should be set to be selected. Then if user press CTRL and click one of row3 or row4, both of them should be selected including the previouse selected row1 and row2.
For deselection, if row1 and row2 are selected, when users deselect one of row1 or row2, both of them should be deselected.
Hopefully someone can give me a hint.

Here is a partial solution using a JList. Only one line gets highlighted when the user makes a selection in the list. But, two lines are returned. There is a blank line between every two lines.
     private void addLineToList() {
          String a = f_one.getText();
          String b = f_two.getText();
          if (a.length() == 0) {
               Utils.showInformationMessage("Item field is empty.");
               f_one.requestFocusInWindow();
               return;
          if (b.length() == 0) {
               Utils.showInformationMessage("Match field is empty.");
               f_two.requestFocusInWindow();
               return;
          model.addElement("item: " + a);
          model.addElement("match: " + b);
          model.addElement(" ");
          int size = model.getSize();
          pairList.setSelectedIndex(size - 3);
          f_one.setText("");
          f_two.setText("");
          f_one.requestFocusInWindow();
     private void editList() {
          if (pairList.getSelectedValue().toString().equalsIgnoreCase(" ")) {
               Toolkit.getDefaultToolkit().beep();
               f_one.requestFocusInWindow();
               return;
          if (!f_one.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Item field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               OptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          if (!f_two.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Match field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               JOptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          String item = "";
          String match = "";
          int index = pairList.getSelectedIndex();
          String choice = model.getElementAt(index).toString();
          if (choice.startsWith("item")) {
               item = choice;
               match = model.getElementAt(index + 1).toString();
               model.remove(index);
               model.remove(index);
               model.remove(index);
          else {
               item = model.getElementAt(index - 1).toString();
               match = choice;
               model.remove(index + 1);
               model.remove(index);
               model.remove(index - 1);
          int size = model.getSize();
          if (size > 2) {
               pairList.setSelectedIndex(size - 2);
          f_one.setText(item.substring(6));
          f_two.setText(match.substring(7));
          f_one.requestFocusInWindow();
     }

SCCM 2012 Multiple Domains with a single SCCM instance

Hello:
Can SCCM 2012 be deployed to multiple untrusted domains within a single install?
I work for a company that maintains multiple client networks all Windows Domain and non are trusted / or are even aware of the other sites.
I would like to setup a SCCM 2012 (and also a Virtual Machine Manager for HyperV) at my office and manage all my different client sites from the single SCCM server.
The connection would be from my office over the Internet in through their on prem firewall
Currently we use Centra Stage and have used Kaseya in the past. I am looking to move from them and focus on SCCM to do this for me.
Is this even possible to do with the product?
Thanks in Advance!
-David

Yes, ConfigMgr can manage (un)trusted forests, but what exactly do you mean with "not aware of the other sites"? A requirement is that name resolution and a connection is possible.
For some good scenario's see also this series:
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Create multiple folders with one click on documents tab in BP in SAP CRM

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

How do I host multiple domains on a single Messaging Server?

How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

Concatenate multiple records into one single record

Hello everyone,
Can anyone guide me how to merge multiple records into one single record
like......... I am getting the data in the file like
aaaaa/bbbbbbb/ccccccccccc/dddddddddddd/eee
ffffff/gggg/hhhhhhhhhhhhhh
/123/4567/55555/99999999/kaoabfa/eee
fffff/kkkkkkkk/llllllllllllllllllllllll
when i use gui_upload I am getting the data into the internal table in the above format.
My main intension is to split the record at / to multiple lines and dowload it into another file.
What i am planning to do is... if the line does not start with / then i want to concatenate the multiple lines into single line and then split it into multiple records. Can anyone guide me how to achieve this.

Yes, it should work.
In my example
Loop at itab.
concatenate i_text itab into i_text.
endloop.
You change that loop for the loop of your internal table with the file records
So if you have this three records
'aaaa/bbb/ccc'
'/dddd/efg'
'hijk/lmn'
i_text will look like this at the end
'aaaa/bbb/ccc/dddd/efghijk/lmn'
then in this part of the code
split i_text at '/' into table itab2.
itab2 will have the records looking like this
aaaa
bbb
ccc
dddd
efghijk
lmn'

Multiple Certs for multiple domains on one server

Is it possible with WLS6 and WLCS3.5 to serve up multiple domains with their own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Hi,
for one WebLogic Server you can only specify one certificate. So to achieve
this you will have
to use different WLS instances for your domains - which is possible on the
same box.
Kind Regards
Maria Salzberger
Developer Relations Engineer
BEA Support
Mike Berger schrieb in Nachricht <3c21f5c3$[email protected]>...
Is it possible with WLS6 and WLCS3.5 to serve up multiple domains withtheir own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Multiple Reports inside one Single Report

Post Author: maximus85
CA Forum: Crystal Reports
Hi....I'm having this problem of having multiple reports inside one single report. Basically what i wanted to built is a Dashboard that contains 4 main subjects:i)Sales - Contains graph that can be drill down for further detailsii)Internal Process - Contains tables that can be drill downiii)Profit/Lossiv)HRAs far as i know, since all four are of different fact table data, they cannot be all thrown inside one single report to be built on. So i came out with using subreports instead for each components and then finally putting them all together as subreport inside the main report(Dashboard).However, i just realized that by doing that, whenever i clicked on the reports that i wanted to drill down with, it will prompt that particular report that i clicked into a new page, and then from there only i can perform drill down.Is there anyway to enable me to straight away drill down the Sales and Internal Process reports from the main reports(Dashboard) instead of having to click twice as that will be unnecessary right?Or mayb if there's another better ways to do what I have to do? Please do advise and suggest......Thanks alot.......

hi chack,
doesnt matter or preferrably both, as long as i can export all the reports in 1 page into 1 excel, or 1 pdf.

Create multiple delivery with one invoice

Hi all,
can you tell me how to do multiple delivery with one invoice,
i tried in vf01 by giving their my 3 delivery nos but it is generating three invoices
pls explain this in details
points will be rewarded
regards,
smmmmmm

Dear Sameer
As per your requirement run the Tcode VF04 (Billing Due list) and select the Delivery Documents for which you want to to have single Billing Document by clicking on Collective Billing document/Online Push Button in that screen.
To Have Single Billing Document for Multiple Delivery you need to have Payer,Terms of Payment,Incoterms(part 1 and part2) same for all materials orelse the billing document will split and this split analysis is visible during creating of Billing document.
Hope this will help you in solving your problem.
Regards
PSH

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

JDBC communication stopped if problem with one single JDBC interface

Hello,
Can you please explain this phrase
"JDBC communication stopped if problem with one single JDBC interface"
THanks,
Soorya

If you are having a problem with a JDBC interface (lets consider this to be a communication channel) then the communication is stopped (via that channel) (only in the case of EOIO).
Hope this clarifies.
Cheers,
Sarath
Award if helpful.

Multiple iPhones with one one computer

I was using multiple iPhones with one one computer, each iPhone device has it's Owen Apple ID. When I connected my device. I got my mothers photos, contacts & applications. All my applications are deleted, is there a way to retrieve my iPhones photos and applications ?

Sign out of your mom's account in itunes, then sign in with your account, then restore your phone from your itunes backup.

Multiple selections to multiple layers or multiple files with one go ?

Hi,
how to convert multiple selections to multiple layers or multiple files with one go ?
Thanks!

You may want to ask over at
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
or
http://ps-scripts.com/bb/
I think there are Scripts about for the task or at least ones that could be adapted without too much problems.
The usual approach is, I think, creating a Work Path from a Selection and then using (expanded) Selections based on the individual subPathItems to intersect with the original selection.
Of course there are possibilities for bad results …

Photoshop crashes while using multiple windows with one image

Has anyone else encountered the following problem:
Photoshop CS4 crashes sooner or later when working with multiple windows with one image (window->arrange->new window for...).
I remember having same problem since CS2. Is this a bug in Photoshop or am I having a bad luck?
Technical specifics:
Ps CS4, iMac, 21.5, 10.6

Don't know. I haven't heard of other people having that problem.
Do you have a crash report I could look at?
Or have you attached your email to crash reports sent to Adobe and can you tell me the date on one of them?

Measuring of Text with Multiple Fonts in One Single Line

I am following a request to write C++ code for a label that contains several text elements in one single line, varying by font, size, color.... Ok, that can be done easily in GDI+ by measuring each element's width and then execute a DrawString
for each of the text elements starting at its calculated position.
So far, I failed miserably.
The horizontal text positions did not appear to be correct. I reverted now to very simple text width measuring tests where the results are still puzzling.
Test 1 (GDI+): Use of MeasureString
With the same font, the width of the string "MM" does not match the double with of the string "M". This cannot be explained with eventual rounding problems.
Test 2 (GDI+): Use of MeasureCharacterRanges
Used the same font as for the first test. The width of "MM" is now exactly double of the width of "M". But: The width of the "M" ist lightyears away from the measurement result in the first test.
Test 3 (GDI): Use of GetCharABCWidthsFloat
Attempted to create a GDI font as close as possible to the GDI+ font in the previous tests. Unfortunately, this third test shows results which do not match the previous results at all.
I am appending the full example here; the results I found during the debug session have been added as comments:
void ApplWindow_TextDrawTest(HDC hDC)
Gdiplus::Graphics *G = new Gdiplus::Graphics(hDC);
G->SetTextRenderingHint(TextRenderingHint::TextRenderingHintClearTypeGridFit);
Gdiplus::StringFormat MyFormat;
MyFormat.SetAlignment(Gdiplus::StringAlignment::StringAlignmentNear);
MyFormat.SetFormatFlags(Gdiplus::StringFormatFlags::StringFormatFlagsNoWrap);
Gdiplus::Font TextFont(L"Calibri", 36, Gdiplus::FontStyle::FontStyleBold, Gdiplus::Unit::UnitPixel);
const wchar_t *Text1M = L"M";
Gdiplus::PointF TextOrigin1M(0, 0);
Gdiplus::RectF TextBounds1M;
const wchar_t *Text2M = L"MM";
Gdiplus::PointF TextOrigin2M(0, 50);
Gdiplus::RectF TextBounds2M;
//--- Test #1: using MeasureString ----------
G->MeasureString(Text1M, (INT)wcslen(Text1M), &TextFont, TextOrigin1M, &MyFormat, &TextBounds1M);
G->MeasureString(Text2M, (INT)wcslen(Text2M), &TextFont, TextOrigin2M, &MyFormat, &TextBounds2M);
//--- Results: Text 1 Width= 44.414 ("M")
//--- Text 2 Width= 76.828 ("MM")
//--- Test #2: using MeasureCharacterRanges ----------
Gdiplus::Status RCode;
Gdiplus::RectF LayoutRect(0, 0, 1000, 100);
Gdiplus::Region RegionsList[3];
Gdiplus::CharacterRange CRanges[3];
CRanges[0].First = 0; CRanges[0].Length = 1;
CRanges[1].First = 1; CRanges[1].Length = 1;
CRanges[2].First = 0; CRanges[2].Length = 2;
MyFormat.SetMeasurableCharacterRanges(3, CRanges);
G->MeasureCharacterRanges(Text2M, (INT)wcslen(Text2M), &TextFont, LayoutRect, &MyFormat, 3, RegionsList);
RCode = RegionsList[0].GetBounds(&TextBounds1M, G); // Result: Text 1 Width = 32.000 ("M")
RCode = RegionsList[1].GetBounds(&TextBounds1M, G); // Result: Text 1 Width = 32.000 ("M"; the second char)
RCode = RegionsList[2].GetBounds(&TextBounds2M, G); // Result: Text 2 Width = 64.000 ("MM")
//--- Test #3: using the good old GDI ----------
int MapModeResult = SetMapMode(hDC, MM_TEXT); // MM_TEXT is equivalent to Unit::UnitPixel?
HFONT TextFont3 = CreateFont(36, 0, 0, 0, FW_BOLD, false, false, false, ANSI_CHARSET, OUT_TT_ONLY_PRECIS, CLIP_DEFAULT_PRECIS, CLEARTYPE_QUALITY, VARIABLE_PITCH | FF_DONTCARE, L"Calibri");
HGDIOBJ PrevFont = SelectObject(hDC, TextFont3);
ABCFLOAT ABCCharData;
BOOL RFlg = GetCharABCWidthsFloat(hDC, (UINT)'M', (UINT)'M', &ABCCharData); // Results: abcfA = 2.000; abcfB = 22.000; abcfC = 2.000
//--- End of Test ---
delete G;
Does anybody have an idea why I get so different results?
Thanks in advance.

This is a development question and should be directed to a forum that assists in coding. The forum you posted to is for Windows 7 related questions.
Sorry I cannot help you
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

Multiple Domains with one single Portal

Similar Messages

Maybe you are looking for