Multiple File Location in Read operation in File Adapter.

Hi,
I am using File Adapter for Read operation. Normally we would make a Logical Directory for reading files at that location. But I have come up with a scenario where we need to read file from 6 different File locations.
Is there any way that the same BPEL process can read file from 6 different locations.
OR
Do I need to make 6 BPEL processes to read file from 6 different locations.
I am using Oracle SOA 10.1.3.4 and JDeveloper 10.1.3.4.
Will really appreciate if someone can help in this regard.
Thanks for the needful.
Cheers,
Varun

Hi Oracler,
Thanks for your reply.
As suggested, the BPEL process with six different file adapters for six different directories and put them on each of the six branches of the pick activity. Will there be any performance oriented issues if you use six adapters for polling at 6 different locations??
Also, the other solution that you have provided from this link Re: Can we have dynamic folder for Polling in BPEL works fine. One of a problem that I encounter while using this solution is that everytime you do any chnages in your BPEL process, the entries from bpel.xml are missing.
Thanks for the needful.
Cheers,
Varun

Similar Messages

Passing file name dynamically in Synchronous read operation of FTP adapter in OSB

Hi,
We are implementing the integration in OSB 11g and using FTP JCA adapters to check if the file exists in the FTP location or not. We are using Synchronous read operation of FTP adapters. We need to pass the file name dynamically at run time. In the JCA file we can hard code the file name. How that file name can be taken dynamically using OSB.
Regards,
Sharmistha

Hi Sandeep,
This is possible.
For creating filenames dynamically for your sender, you will have to crate a variable name ( eg: %VAR%) as you file name and then you will have to give the name of your file under variable substitution. Just check this link for more info,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
In the case of receiver file adapaters, you have 5 options for file creation like,
1.Create
2.Append
3. Add time stamp
4.Add Counter
5. Add Message ID
You can choose any of these options or you can do it dynamically from you payload. Just check out this help link for more info,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Hope this helps

How to read multiple files at multiple locations using properties file

hi all ,
in my code i take configuration input from a properties file ,it was really easy but what if there are multiple files ? how can i take configuration input (file path etc) from properties file in that case ? any suggestion ?

thanks :) ..i am doing like this :
String fName[]=new String[10];
          String choice[]=new String[10];
          String Delim[]=new String[10];
          ResourceBundle a = ResourceBundle.getBundle("input");
          String n=a.getString("NOF");
          try
               for(int i=0;i<Integer.parseInt(n);i++)
                    fName=a.getString("PATH"+(i+1));
                    choice[i]=a.getString("HEADER"+(i+1));
                    Delim[i]=a.getString("DELIMITER"+(i+1));
                    putData(fName[i],choice[i],Delim[i]);//to put data in database
          catch (NumberFormatException e)
               System.out.println("Number of files are invalid");
hope this method would be fine ....again thanks for the advice :) :)

How to iterate through multiple records read from a file adapter?

I am reading multiple records from a file using SyncRead file adapter.
I want to iterate through the records to perform some action on every record. How to do this?
I found few threads related to this..but did not get the solution.
Please note that I am using Jdev 10.1.3.4
Thanks

For count expression, I am getting following error:
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:subLanguageExecutionFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>XPathExecutionError</code>
<summary>XPath expression failed to execute. Error while processing xpath expression, the expression is "ora:countNodes(bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection','/ns4:EmpCollection'))", the reason is FOTY0001: type error. Please verify the xpath query. </summary>
</detail>
</Fault>
I hard-coded count, in order to proceed. Then I got following error
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:bindingFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>null</code>
<summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELProcess4_1.0_dc4a703c46a242f69d6cea305b2df3a3.tmp/WriteDA.wsdl [ WriteDA_ptt::insert(VbEmpCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Mapping Not Found Exception. The mapping [C1] for descriptor [class bpel___localhost_default_BPELProcess4_1_0__MD5_ad2539e1386433a9e059bcc969732f11_.WriteDA.VbEmp] could not be found. The input xml record had an element [VbEmp/C1]. ; nested exception is: ORABPEL-11627 Mapping Not Found Exception. The mapping [C1] for descriptor [class bpel___localhost_default_BPELProcess4_1_0__MD5_ad2539e1386433a9e059bcc969732f11_.WriteDA.VbEmp] could not be found. The input xml record had an element [VbEmp/C1]. Make sure that the input xml is valid relative to the xsd and that the mapping exists in the Mappings.xml. If an old version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the app server. If the same descriptor is described in two separate Mappings.xml files, make sure both versions include this attribute/mapping. </summary>
<detail>null</detail>
</detail>
</Fault>
The bpel code is as follows (I can share entire BPEL project..But not sure how to attach to the thread :( )
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="BPELProcess4"
targetNamespace="http://xmlns.oracle.com/BPELProcess4"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns4="http://TargetNamespace.com/InboundService"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:client="http://xmlns.oracle.com/BPELProcess4"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/ReadFA/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/WriteDA"
xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/db/WriteDA/"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:BPELProcess4"
myRole="BPELProcess4Provider"/>
<partnerLink name="WriteDA" partnerRole="WriteDA_role"
partnerLinkType="ns2:WriteDA_plt"/>
<partnerLink name="ReadFA" partnerRole="SynchRead_role"
partnerLinkType="ns1:SynchRead_plt"/>
</partnerLinks>

<variables>


<variable name="inputVariable"
messageType="client:BPELProcess4RequestMessage"/>
<variable name="outputVariable"
messageType="client:BPELProcess4ResponseMessage"/>
<variable name="Invoke_2_insert_InputVariable"
messageType="ns2:VbEmpCollection_msg"/>
<variable name="Invoke_3_SynchRead_InputVariable"
messageType="ns1:Empty_msg"/>
<variable name="Invoke_3_SynchRead_OutputVariable"
messageType="ns1:EmpCollection_msg"/>
<variable name="Invoke_3_SynchRead_InputVariable_1"
messageType="ns1:Empty_msg"/>
<variable name="Count" type="xsd:integer"/>
<variable name="iterater" type="xsd:integer"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client"
portType="client:BPELProcess4" operation="process"
variable="inputVariable" createInstance="yes"/>

<invoke name="Invoke_3" partnerLink="ReadFA" portType="ns1:SynchRead_ptt"
operation="SynchRead"
outputVariable="Invoke_3_SynchRead_OutputVariable"
inputVariable="Invoke_3_SynchRead_InputVariable_1"/>
<assign name="Assign_1">
<copy>
<from expression="1"/>
<to variable="iterater"/>
</copy>
<copy>
<from expression="1"/>
<to variable="Count"/>
</copy>
</assign>
<while name="While_1"
condition="bpws:getVariableData('iterater') <= bpws:getVariableData('Count')">
<sequence name="Sequence_2">
<switch name="Switch_1">
<case condition="bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection','/ns4:EmpCollection/ns4:Emp/ns4:C4') = "Pune"">
<sequence name="Sequence_1">
<assign name="Assign_3">
<copy>
<from expression="bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection','/ns4:EmpCollection/ns4:Emp')[bpws:getVariableData('iterater')]"/>
<to variable="Invoke_2_insert_InputVariable"
part="VbEmpCollection"
query="/ns3:VbEmpCollection/ns3:VbEmp"/>
</copy>
</assign>
<invoke name="Invoke_2" partnerLink="WriteDA"
portType="ns2:WriteDA_ptt" operation="insert"
inputVariable="Invoke_2_insert_InputVariable"/>
</sequence>
</case>
<otherwise>
<sequence name="Sequence_3">
<empty name="Empty_1"/>
<assign name="Transform_1">
<bpelx:annotation>
<bpelx:pattern>transformation</bpelx:pattern>
</bpelx:annotation>
<copy>
<from expression="ora:processXSLT('Transformation_3.xsl',bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection'))"/>
<to variable="Invoke_2_insert_InputVariable"
part="VbEmpCollection"/>
</copy>
</assign>
</sequence>
</otherwise>
</switch>
<assign name="Assign_2">
<copy>
<from expression="bpws:getVariableData('iterater') + 1"/>
<to variable="iterater"/>
</copy>
</assign>
</sequence>
</while>
<reply name="replyOutput" partnerLink="client"
portType="client:BPELProcess4" operation="process"
variable="outputVariable"/>
</sequence>
</process>
From the process flow, I can see that the array element expression works and the first employee record is correctly assigned to the Invoke_2_Input_Variable.
However Invoke_2 is erroring out.
Thanks
Edited by: user8645981 on Feb 5, 2010 2:44 AM

Multiple directory locations in Sender File adapter

Hi All,
I have a scenario where my single adapter needs to poll from 7 different directory locations. Is it posible to configure all seven sorce directory location in single sender file adapter.
Regards,
Xier

Hi,
I apologize for wrong information, actually I never tried but it's possible after seeing this.
Note:821267
11. File Sender: Processing Multiple Source Directories
Q: Can the File Sender Adapter be configured to poll multiple source directories from a single channel?
A: This functionality is available starting with XI 3.0 Support Package 14 as well as PI 7.0.
raj.

How to upload multiple files into a server location at a single time

Hi All,
In my application i need to send multiple files from a particular page into the server location. In this page there will be an option to upload a file and after selecting the file , we will have an option asking if we were interested to send another file. It works just similar to google mail where we can multiple files at the same time. Right now though i had coded the uploading files concept i am facing some problems when trying to upload multiple files. All the files are being appended to a single file but i want them to be placed as different files at the specified location. Plz help me in this regard...
Thanks in advance................,,

Hi,
i am sending the code in my prg. Have a look at it.
var multi_selector = new MultiSelector( document.getElementById( 'files_list' ),3);
In the above line i am specyfying that the maximum no. of files to be uploaded is 3. So if i upload less than 3 files, the program doesn't work and is not reading the uploaded files. If i upload 3 files it works fine. So please suggest me how to make this work irrespective of the no. of files uploaded using apache commons.
My code is as follows:
<form action="./servlet/Sample" method = "post" enctype="multipart/form-data">
     
     <input id="my_file_element" type="file" name="file_1" >
     <input type="submit" name="submit1" value="submit">
</form>
Files:

<div id="files_list"></div>
<script>
     
     var multi_selector = new MultiSelector( document.getElementById( 'files_list' ),3);
     
     multi_selector.addElement( document.getElementById( 'my_file_element' ) );
</script>

File Adapter read Operation

I am using File adapter to read files from the given location.
With this read operation it picks all the files at time.
I want to configure File Adapters that it should pick one file at time from the given location with given polling interval.
Can we do this with file Adapters in BPEL.
I am using SOA Suite 11g.
Thanks,
Arun Jadhav

Hi, in order to achieve that you need to set the "SingleThreadModel" and "MaxRaiseSize" properties for your file adapter.
Edit the adapter's jca file and add the following properties:
<property name="SingleThreadModel" value="true"/>
<property name="MaxRaiseSize" value="1"/>
You can set these properties also through jdeveloper, by opening composite.xml, selecting the adapter and then changing the properties through the properties panel.

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

EXS 24 Logical end-of-file reached during read operation Result code = -39

EXS kit Trip Hop Remix will not completely load. Upon trying to load it I get the error, Logical end-of-file reached during read operation Result code = -39. The kit ends up lacking samples. It worked at one time but now it will not load up. To try and fix I extracted two kits with the same name but oddly they are slightly different sizes and have different creation dates, one 2004 the other 2007 hmmm (one goes in Garage band for remix tools the other gets placed in 02 Electronic Drum kits) from the install disks using Pacifist hoping to replace corrupted files. NG. I also reinstalled all the samples from the LP8 install disk, still NG. Anybody have a solution. THanks.

To further clarify, the samples are all located in the folder Garage band/.../.../.../Sampler Files/Treated Percussion Sets/Perc-DnB+Triphop. They are used in the EXS24 Trip Hop Remix kit.exs. The 3 samples that seem to be causing the error are, YT2BGLRHTX02_3ue.aif, YT2BGLRHTX03_3ue.aif, YT2BGLRHTX04_3ue.aif. The kit is useless and my song is screwed up now that the kit will not load. Any ideas for a fix out there ?

How to read multiple files of different name using single file adapter

There are two inbound locations inbound1 and inbound2 , and the files structure present in these two inbound locations are same but the files start with different names example
(1)files in inbound1 starts with file1,file2...
(2)files in inbound2 starts with abc1,abc2...
by using same file adapter with read option how can i read both files....

Hi K.A.N.N.,
You can define multiple directories using the above link in 11g and poll for the file as \*.*.
Alternatively you can use the Synchronous Read and specify the file name at runtime.
You can also use Pick activity to define multiple branches each with a File Adapter to read from a specified location with specified file name. Although it would contain multiple Adapter Definitions at Development-time, only one of the Adapters will execute at Run-Time.
Regards,
Neeraj Sehgal

In oracle B2B multiple files are getting picked from SFTP location for one file in custer environment

Flow is like :
REST ENDPOINT->OSB PROXYSERVICE->BUSINESS SERVICE->B2B SFTP LOCATION->B2B->SOA JMS Queue->SOA COMPOSITE-
Due to cluster environment, there is issue when B2B picks the file from SFTP location for Custom protocol using sftp listening channel. Sometimes B2B picks multiple files from SFTP location for just one copy of file. It is happening because of cluster environment 4 instances of server is looking into the SFTP location for picking the file and sometime 2 or more instances of server are reading same file and sending the copy to B2B.
Please let me know , how can I stop this behavior

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

11g fileadapter - read operation triggered by file

Hi,
I have practiced with the new file adapter feature to trigger a read operation by an endfile. The read operation that is triggered by a file is useful in specific scenario's, but I have a question about it.
There is no correlation between a file and a trigger file. What will happen when multiple files are written at once with multiple corresponding trigger files. How does the engine knows which trigger file belongs to which fle so that the correct completely written file is processed? I do not have a clear answer on this question yet.
I know that the current 11g tech preview is not complete and some features that are in the preview will not survive in the final release, but I am curious about your thoughts about this issue.
Regards,
-Tom

Hi tom,
The documentation for triggering mechanism is here: http://otndnld.oracle.co.jp/document/products/as10g/101310/doc_cd/integrate.1013/b28994/adptr_file.htm#CIAJCBGI
In a nutshell, the trigger file is associated with an endpoint and not with individual files for the endpoint directory. Consider a scenario wherein a third party application writes files in some folder and your BPEL process needs to process all the files when a certain marker file appears somewhere in the file system. In such a case, you will define the wsdl as:
<jca:operation
PhysicalDirectory="C:\ORAHOME\integration\jdev\jdev\mywork\triggers_proj\inputDir"
ActivationSpec="oracle.tip.adapter.file.inbound.FileActivationSpec"
IncludeFiles="Order.*\.xml"
PollingFrequency="30"
TriggerFilePhysicalDirectory="C:\foo"
TriggerFile="Purchaseorder.trg"
</jca:operation>
In this example, adapter will start processing the Order*.xml files only when it finds the marker file "Purchaseorder.trg" in "C:\foo"
Hope this answers your question.

Logical end-of-file reached during read operation

Hi,
Something strange happened to my Logic a couple of days ago - all of a sudden. When I start Logic up it gives me the following error message:
*Error reading/writing file “com.apple.logic.pro.cs”: Logical end-of-file reached during read operation.*
I have re-installed Logic, as well as updated it (8.0.2), I have repaired disk permissions in Disk Utility, and it still keeps popping up. I cannot get on with my projects and I have deadlines!
I found an IT support site, according to that I don't have enough space on my HD. However, I do... I'm confused, and desperately need help.
Thank you so much, I'm looking forward to hearing from somebody.
Agnes

I am not opening any files, just launching Logic.
I know. And when you launch Logic, it loads its preferences files - and it seems this is failing - most likely due to file corruption. So delete the file, as I said, and Logic should load fine.

Reader XI: how to load multiple files so that I can show them in one instance of full screen mode?

It is possible to show a pdf file in full screen mode in acrobat reader XI (windows).
It is indicated that this is also possible with multiple files.
I do not understand how to accomplish this; How can I load more than one file to show in the full screen mode?
can anyone explain this to me?
Thanks in advance!

frankvanrooij wrote:
It is indicated that this is also possible with multiple files.
Where do you see that?

Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

Multiple File Location in Read operation in File Adapter.

Similar Messages

Maybe you are looking for