Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

Similar Messages

Did being able to use the same data in multiple apps get added?

In the new iOS 4.2, did Apple include the ability to use the same data, eg PDF files in multiple apps? I have several hundred PDF files that I want to use in three different apps.
Or is it still the same, that you have to load up (and use valuable space) the same data again and again for EACH individual app?
Thanks

I don't know but think it would mean the PDFs must be stored somewhere on the device itself (like on a computer). Then also the apps must be designed to use the files from there. So a change in the iOS wouldn't be all that's needed.

I am unable to load GRAPHIC files using the transaction SFP.

I am unable to load GRAPHIC files using the transaction SFP.
The error message says that there is no connection to the below given url.
http://<hostname:8000>/sap/bc/fp/
is it something like i have to activate this service in transaction sicf ?

Try http://<hostname:8000>/sap/bc/fp/!
! at the end ..
Regards
Juan

Events cannot have multiple exceptions for the same date

I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

Is it possible to upload multiple files at the same time?

Hi folks,
It seems pretty trivial to implement a file upload item, but is there some way to allow selection (upload) of multiple files at the same time? Seems like this has probably come up before, but I didn't find much for solutions in my search. Any links or insight would be appreciated.
Thanks!
-Adam vonNieda

Thank you both for your replies.
@Manish - That does allow for multiple file uploads without refreshing the page, but does not allow for multiple file uploads at the same time.
@Tony - That might be the way I end up going, although I probably should have been more specific. It would be really nice it there was a way to do a mutli-file select using the control or shift button like you can with a standard file selection dialog (if you want to copy multiple files, for example). Having a separate line for each file browser means there has to be a limit on the number that can be selected at the same time.
Has anyone implemented a method of selecting multiple files at once, and hitting an upload button once to get them into the database?
Thanks again Manish and Tony, very helpful.
-Adam

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

HT1473 How do I get iTunes to download an entire album in one file versus splitting it into multiple files with the same Album Title?

I have added several CDs to my iTunes files, several Albums were added in the form of multiple files of the same Album title with random songs listed, but not the entire album in one file.
I have tried to reassemble the Album into one file, but could not find a way to do so.

Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2

How do you take off reseiving messages on multiple devices using the same apple account

How do you take off reseiving messages on multiple devices using the same apple account?

Go to Settings>Messages>Send and Receive on all but one device and add a unique email address on each device and delete the commone Apple ID email device
If there is also an iPhone with iOS 6 associated with the Apple ID, uncheck the phone number on all but the phone.

HT204053 Can multiple people use the same Apple ID for their own devices?

Can multiple people use the same Apple ID for their own devices? I just set up my IPhone 4S (first time user) using the same Apple ID as my daughters and now we receive each others texts, do I need to set up my own Apple ID account?

Yes, you can. In fact it's recommended that you use different IDs for iMessage, FaceTime and iCloud. You can still share the same ID for iTunes without any issues.
You are getting each other's text messages because you're using the same ID for iMessage. To fix this, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with a different ID. To avoid getting each other's FaceTime calls, do the same thing in Settings>FaceTime.

What is the best way to manage multiple ipods using the same itunes?

Hi Everyone
i am trying to manage three different ipods through the one Itunes, all with very different tastes, not sure if I am doing it the best or easiest way so does anybody have a simple solution on what you're supposed to do, to keep it all simple!
Cheers
Liv

If you have created a new Windows user account you need to log out and then log back in with your original user name. By default each Windows profile will have an independent iTunes library.
If instead you managed to create a new library within the same profile. click the icon to start iTunes and immediately press and hold down the shift key, keep holding until asked to create or choose a library. Click Choose and navigte back to your original which should be at <User's Music>\iTunes.
Your question as posed was:
What is the best way to manage multiple iPods using the same iTunes {library}?
in which case Selected Playlists is probably the best approach. Simply create a playlist for each device, Alice's iPod, Bob's iPhone etc. and sync the device with the appropriate list.
tt2

How would I go about adding multiple rectangles using the same lines of code?

How would I go about adding multiple rectangles using the same lines of code? I would prefer to just run through a set of code every time I need a polygon. If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.

>>How would I go about adding multiple rectangles using the same lines of code?
You could create a method that creates and returns x number of Rectangle elements:
public IEnumerable<Rectangle> CreateRectangles(int numberOfRectsToCreate)
for (int i = 0; i < numberOfRectsToCreate; ++i)
Rectangle rect = new Rectangle();
rect.Fill = Brushes.Blue;
rect.Width = 100;
rect.Height = 100;
yield return rect;
..and then call this method from anywhere in your code:
IEnumerable<Rectangle> rects = CreateRectangles(5);
foreach (Rectangle rect in rects)
//add to StackPanel or do whatever with the Rectangle elements:
yourStackPanel.Children.Add(rect);
>>If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
When adding Point objects to a Polygon you can only add one per call to the Add method but you could call the Add method inside a loop, e.g:
for(int i = 0; i < 10; ++i)
//add to StackPanel or do whatever with the Rectangle elements:
Polygon p = new Polygon();
p.Points.Add(new Point());
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

Problem importing two service interfaces using the same data types

Hi,
I've been playing around with BPM for a while. Now I wanted to add a custom service interface to my starting event. I created the interface in ESR of CE 7.11. After importing I get this error message and I can't use the interface:
Cannot change XsdSimpleTypeDefinition AcademicTitleCodeContent by importing the document http://sap.com/xi/APPL/SE/Global::src/wsdl/TestInterface.wsdl, because it is already defined in the document http://sap.com/xi/APPL/SE/Global::src/wsdl/rootwsdl_CustomerERPByIDQueryResponse_InService.wsdl in this project. Importing into another project might be possible.
Of course the problem is clear, but how can I achieve importing two service interfaces that use the same data type without changing the xsd source?
Thanks in advance,
Mane

Sorry for the late answer, but I am really busy at the moment.
Unfortunately I can't the Interface and data types are already changed.
But this happened various times. Each time I already had imported a SAP Enterprise Service into NW BPM that contains a bunch of inline data types. While creating my own interface I referenced one of those data types that are stored in a SAP namespace. After import the error message appeared.
In the wsdl of the created interface there is a import statement for the namespace where the referenced data types origin from. Additionally there is a namespace definition xmlns:p1="SAPnamespace". In the element the type is "p1:ReferencedType". Could this maybe cause the error, because one time it is with this leading p1 in my created wsdl and once without in the SAP Service wsdl?
Thanks and I am looking forward to next EhP of NW BPM,
Mane

Loading multiple instances of the same loader

Hello everyone,
I am trying to load in 5 pictures but 2 of those pictures need to be added multiple times to the same scene. For example you would use Loader to load one tree but would show that tree 9 times. The problem I am experiencing is that each object loads fine once but objects that are the same with different x and y values are placed at the last location that was set in the loop.
            for(var i=0; i < LoadedXml.resources.resource.(@type==LoadedXml.resources.resource.@type[fileCount]).@coun t; i++)
                sprite.name = LoadedXml.resources.resource.@type[fileCount] + i;
                sprite.x = LoadedXml.objects.object.(@type==LoadedXml.resources.resource.@type[fileCount] && @instance == i).@x;
                sprite.y = LoadedXml.objects.object.(@type==LoadedXml.resources.resource.@type[fileCount] && @instance == i).@y;
                table.push(sprite);
this code sets the properties but say the count is equal to 9 and the last x and y set is 20 , 20. Then all of the objects are placed at 20,20. Even though they are clearly placed in there own element within the array. If anyone can help please please do it.
Dexter

then your xml parsing is faulty.

Failed to load multiple files using theMgr.createLocalFileInputStream

Hi
I am using 2.3.8 and having trouble with putting multiple files to the container using XmlInputStream.
I have hundreds of documents in 'output' folder from my project root, and I was able to load them by using other signature - reading each line from each file via BufferedReader.
However, if I switch to XmlInputStream, the first putDocument() is successful but I get an error an XmlException at the second iteration.
container = theMgr.createContainer(theContainer, config);
XmlUpdateContext updateContext = theMgr.createUpdateContext();
Transaction dbtxn = environment.beginTransaction(null, null);
txn = theMgr.createTransaction(dbtxn);
Iterator filesIterator = files2add.iterator();
while (filesIterator.hasNext()) {
File file = (File) filesIterator.next();
String docName = fileNameToDocName(file);
XmlInputStream theStream = theMgr.createLocalFileInputStream(file.getName());
container.putDocument(docName,
theStream,
updateContext,
null);
com.sleepycat.dbxml.XmlException: Error: The resource does not exist: malformed or non-existent stream source, errcode = INVALID_VALUE
     at com.sleepycat.dbxml.dbxml_javaJNI.XmlContainer_putDocument__SWIG_5(Native Method)
     at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:405)
     at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:77)
     at com.expd.arch.persistence.BerkeleyTestCase.loadXmlFilesViaStream(BerkeleyTestCase.java:85)
The second document failing looks like this - nothing wrong
<?xml version="1.0" encoding="UTF-8"?>
<consol version="0">
<import-file-number>21345</import-file-number>
<ownership-location>LAX</ownership-location>
<id>0</id>
</consol>
Can someone tell what's wrong in my code?

Hello,
The error is indicating something wrong with the file name or location, not the content. Try verifying that the file name passed to createLocalFileInputStream() is in good shape and refers to a regular file with permission to read. If that looks OK, there's a small chance you need to explicitly delete the XmlInputStream between calls. That should not be necessary, because the putDocument() call should consume it, but it does not hurt.
Regards,
George

Import xml data in Access when multiple rows use the same fieldname

HI.
First of all sorry for my english :-) I have a LiveCycle Designer ES form with multiple rows that I send via e-mail as XML data.
example:
Row 1
Firstname: John Lastname: Dow
Row 2
Firstname: Steve Lastname: Austin
The exported XML is OK but when I want to import it into my Access database, only one row is imported. I pretty sure that the problem comes from the fact that may exported XML use the same fieldname (what is important if I want to import data in the correct Access field) but I don't know what to do to be able to import all the rows of the same Form.
Any idea?
Thanks a lot
Frederic

Hi Viktor,
In case of order recognition rules you should increase the relevancy in the newer version of the cartridge so appropriate ORR will be triggered. In other xqueries, you can try using new namespace as a model variable for each and every version of the cartridge
Regards,
JP

Load multiple files using the same data load location

Similar Messages

Maybe you are looking for