Multiple HTML DB connecting to the same database, in error

I am having a problem getting the HTML DB application in instance TMSQA to connect to the TMSQA database; it connects to the TMSDEV database. I have tried setting the connect_string under DAD_HTMLDB in wdbsvr.app in both TMSDEV and TMSQA to their corresponding IP addresses and hostnames. But when I connect to HTML DB via my browser using either IP address:7777/pls/htmldb or hostname:777/pls/htmldb in the URL, I always connect to TMSDEV.
I have one physical server called ORATEST3 at IP address 172.31.243.33. It is divided into 2 virtual servers:
TMSDEV:
IP address - 172.31.243.53
ORACLE_HOME - /db/tmsdev/u01/app/oracle/product/9.2.0.5/
HTTP Server - /db/tmsdev/u01/app/oracle/product/9.2.0.5/Apache
TMSQA:
IP address - 172.31.243.72
ORACLE_HOME - /db/tmsqa/u01/app/oracle/product/9.2.0.5/
HTTP Server - /db/tmsqa/u01/app/oracle/product/9.2.0.5/Apache
Does anybody have any idea as to how to setup the HTML DB in each instance to connect to its corresponding database?

Hi all,
Sorry for replying late.
Thanks @Dude, Nelson Calero, indeed it helped me!
I could recover database multiple times from a same snapshot and thus I would like to share my findings.
Found that when we recover database with RESETLOGS option it actually starts a new database version called Incarnation of the database. Once this new branch is started we can recover database from old backup only till the SCN point where we performed DBPITR. After that point, snapshot/backup becomes orphaned backup.
[http://docs.oracle.com/cd/B19306_01/backup.102/b14192/flashptr006.htm]
If you want to recover database from the same old backup we have to reset the database to the incarnation number when snapshot/backup was taken using following command:
RMAN> RESET DATABASE TO INCARNATION 2; (considering backup was taken at Incarnation 2)
Also, If current controlfile is missing you need at least one backup of current controlfile. It is mandatory as after resetlogs, sequence number of log file changes and you cannot recover database from any available backup.
To make sure that latest control backup is always available please enable the AUTOBACKUP feature of the database which backs up the controlfile and spfile on any database change event.
Again this is the lesson for those who don't know much about AUTOBACKUP.
Regards,
Shrirang

Similar Messages

Solaris 8: Multiple primary interfaces connected to the same network

I have a machine with Solaris 8, and it has multiple interfaces that are connected to the same network which means they all have metric 0 (1 hop) to the default gateway.
assume:
e1000g0: 192.168.30.70
e1000g2: 192.168.30.72
e1000g4: 192.168.30.74
e1000g5: 192.168.30.76
gateway: 192.168.30.65 (Cisco Router)
However, it seems like despite the fact that they have a direct connection, they seem to be using e1000g0 to access the 192.168.30.0 network to get to the default gateway and then to anywhere else.
When I send a ping to say, 192.168.30.74 (IP of e1000g4) and capture packets on e1000g0, I see the "echo reply" messages going out of it as opposed to e1000g4 even though e1000g4 is the one receiving the "echo request". This should not happen and these should be completely independent as they should all be advertising a 1 hop to that network
The outputs from netstat -rn and ifconfig -a are shown in the picture on the link below
[http://img836.imageshack.us/img836/7308/ifconfignetstathiddenip.jpg]
This gets even more confusing when I go into the Cisco router and run the command: "show mac address-table" where only the MAC address of e1000g0 is shown for the switch port it's connected to, but not for the other interfaces which are connected to the switch. Yes, all ports are active (no shut) and are pingable.
Also, the odd thing is that ALL of these individual MACs show up in the router ARP table when the machine comes up, however after sending a ping to one of them, after a certain expiry or whatever period, the MACs disappear from the router ARP table and only the MAC for e1000g0 shows up. The arp table of the solaris machine however shows all the relevant MACs of each port of the router that it's physically connected to (This is actually a Cisco Switch with the advanced IP services imagine and L3 routing turned on)
Before anyone asks: The setting local-mac-address? setting does NOT exist in my machine and it never has, but it used to work fine. Also, from the ifconfig command, once can tell that all the MAC addresses are fine.
I need to somehow assign all these interfaces equal priority and make them understand that they're physically connected to the 192.168.30.0 network and there's no need to go through e1000g0 to get to it.
This is causing a lot of problems as eventually all traffic will end up going through the e1000g0 interface and that will become a bottle neck.
Please help Thanks in advance

Ok thanks. That was a useful response.
I did think about the trunking software that is claimed to be available for Solaris 8, but it's only available if you've got paid support contract. Oracle came and ruined everything re: Sun support which is so expensive now.
The other confusion is, we never had that OR needed to configure trunking/link aggregation on this machine, so why now?
Lastly, by your explanation, this should be expected and is "normal" behaviour, which would mean that this machine was always doing this and I only just noticed it this time? I thought if you turn off ipv4 forwarding and router function in the machine, it's every interface for itself. But it's not doing that :(
So then the question is, Can I force it? I've tried a bunch of things by manipulating the tables and it seems to mess things up where nothing is getting through or it now shifts all the traffic to some other port make the problem no different
Is there a way to give equal weight to all interfaces for the traffic to go directly through them that is originating at those ports?

Multiple instances of APPS for the same database?

Since upgrading to 11.5.10, we are not able to have multiple instances of APPS open for the same database. Prior to the upgrade we could which allowed a person to have 2 sessions open with different responsibilities, thus not having to switch each time.
Is there a profile setting/patch etc which will allow this again?
thanks

In my case I think the company's main requirement was to have two separate environments (PROD and TEST) open at the same time which I think is fine.
From memory (don't quote me on this) I don't think the old Personal Home Page is supported from 11.5.10.2 or something.
I think another option was rather than have multiple sessions, add the two functions you are trying to access to the same menu/responsibility then you can open both at the same time.
I just use favourites with one forms function from each responsibility and hardly click on or attempt to navigate the responsibility function list ... this mimics the old functionality.
Also created a few "Copy Favourites" concurrent programs to copy favourites from one user to another or to all users of a responsibility.
Re the old vs new feel - I know the feeling ;-) Ages ago I logged an SR to see if the dynamic tree portlet you get when you integrate with Portal could be used within core Apps, but wasn't possible per standard. Also thought of throwing together a greasemonkey script to achieve the same, but haven't gotten round to that ;-) and it wouldn't work with IE ... maybe one of the OAF gurus might read this and have a crack at it ?!
Gareth

Multiple event handlers registered for the same event and error when adding users to sec groups

Project Server 2013 CU April (May) 2014
I've created and installed two event handlers (separate dll:s) and both are triggering on Project Published - initially, both are working fine.
After an IISReset, trying to create a new security group (or add a user to an existing group) will result in an error on the page and a corresponding error in the ULS log - the latter indicating an error in the method security.creategroups, and specifically
a problem 'An item with the same key has already been added.'
An SQL trace reveals a break in execution after executing the proc 'pub.MSP_ADMIN_ReadEventReceivers' which returns all registered event handlers.
In my case, the result of that proc execution shows that there are two event handlers registered with an EVENT_ID of 53 (Project Published) and with ORDER_FIRED set to 1 and 2 respectively.
I tried removing one of the event receivers using the Central Admin PWA interface and then everything worked just fine - I added the event receiver back again, and everything STILL worked! IISReset and I got the error back again. :-(
Since there's obviously some problem with reading multiple entries from that table regardless of the ORDER_FIRED differentiation, I tried temporarily modifying one of the '53' entries in the table directly and then the sec group was created just fine!
I would like to know if anyone else has seen this? I've seen this on three separate installations now after deploying a second event listener onto those systems.
/Lars Hammarberg
//Lars Hammarberg www.connecta.se

Hi Lars,
yes I have seen the same issue. It is not related to April CU. I had the error before with SP1.
It is not only an issue with the security groups. At least in our case nothing worked at all. No custom field editing, all Queue Jobs failing.
For your case I suggest you consolidate your code in one eventhandler.
Theory says that you can have more than 1 (up to 999) eventhandlers for one Event (http://msdn.microsoft.com/en-us/library/ms481079(v=office.12).aspx) but that seems not to
work. Not sure, if it worked in earlier versions.
Kind regards
Christoph
Christoph Muelder | Senior Consultant, MCTS, MCSE, MCT | SOLVIN information management GmbH, Germany

Extension connecting to the same database

I extended a SQL VO and for testing had it run in Development instace. Now the instance is down for clone. I had to change the SQL Query and while trying to run it, it errors with could not establish the connectivity even though I have the changes made to the project settings to connect to another instance. Where all do I need to change the connection?
Thanks,
Hari

I am not sure what your question is..but when you move to a different instance all that you need is to define the new instance's connection. I am not sure why the old connection information in jpx stays despite the fact that we change it in the project settings.

Help needed!!: Running two the same Ifs services on the same database.

Hello!
I would like to know if it is ok to have started two LibraryServices at the same time on the same database.
For example:
One LibraryService that is using "IfsDefault.properties" and running on default Apache Jserv (default IFS configuration).
Second LibraryService that is using the same "IfsDefault.properties" (the same database) and running on Tomcat.
I wanted to connect to LibraryService that is already started, but I have read in the documentation that I can do this by finding LibraryService, but only when it is running in the same process. So to have access I have to start my own service connecting to the same database as one that is already running in Jserv.
Is it ok to have such configuration?
Or maybe there is allowed only one LibraryService for one database?
Can somebody help?
Piotr Walendziak

you can have multiple LibraryService instances, each pointing to different databases, or all pointing to the same database. LibraryService instances are name-unique, however, so you must give each one its own name. also, they can all be active in the same process (JVM).

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

Multiple OLE DB connection managers to the same database instance in a SSIS package

Hi,
While migrating DTS package to SSIS package, I came across one which had multiple OLE DB connection managers all connecting to the same Oracle schema in the same instance.
There are that many execute SQL task corresponding to each of these connection managers.
Each of these SQL task call different Oracle stored procedures and executes them in the same schema in the same instance.
My question is, is there any particular reason or advantage in having multiple connection managers?
Can't we have one single connection manager and use the same in all of these SQL tasks?
Does multiple connection managers provide any added advantage like parallelism or something?
In this particular case, there are no actual workflows, rather each of these SQL tasks are stand alones. But there are other packages which has SQL tasks in workflow but still each of them calling separate connection managers all calling the same schema
in the same instance.
Thanks for your time.
Cordially, Biju George

Well like I said, each of these SQL task calls "different" Oracle stored procedures even though executes them in the same schema in the same instance. I tried a sample testing by creating two separate packages, one with only one single
OLE DB connection referred in all of the SQL tasks and in the other one with mutiple OLE DB connections to the same schema in the same instance each of which is referred in each of the SQL task in one to one mapping.
Now the first one created one session in Oracle but the later created as many sessions as there where OLE DB connection managers. The first one took longer to complete than the second one since second one created independent sessions and executed those procedures
sort of parallely.
I guess that can be called an advantage of creating multiple connection managers to the same schema in the same instance.
Cordially, Biju George

How to share the same Database Connection when using several Task Flows ?

Hi All,
I’m using JDev 11.1.1.3.0.
I’m developing ADF Fusion Applications (ABC BC, ADF Faces…)
These applications are deployed on a Weblogic server.
Each application has only one Application Module.
All Application Modules have the same connection type defined: JDBC DataSource : jdbc/GCCDS
It is working fine.
I’ve also developed Task Flow Applications for small thinks that are reused in multiple main applications.
Each Task Flow Application has also one Application Module with the same connections type as main applications.
All these task flows are deployed to JAR file (ADF Library JAR File) and are reused on my main applications. (drag and drop from the Resource Palette to ADF Regions….).
There are some parameters passed to Task Flows, so that they can filter data depending on which main applications they are called from.
Everything is working perfectly.
All my main applications are using more and more task flows. Which is nice for the reusability etc…?
Only ONE PROBLEM: DATABASE CONNECTIONS.
Every Task Flows service made a database connection. So one user may have 10 database connections for the same adf page. And when there are 100 users that are working at the same time, it becomes a problem.
How to share the same database connections for the main applications and all task flows which are used in the main application?
Best Regards
Nicolas

Hi John,
When I open a ADF Library JAR file of one of my task flow. (gcc_tf_recentSites.jar)
I can see TF_RecentSitesService.xml and TF_RecentSitesServiceImpl.class in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service folder
+ bc4j.xcfg in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service\common folder.
bc4j.xcfg details are
+<?xml version = '1.0' encoding = 'UTF-8'?>+
+<BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">+
+<AppModuleConfigBag ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<AppModuleConfig DeployPlatform="LOCAL" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model" name="TF_RecentSitesServiceLocal" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+<Custom JDBCDataSource="jdbc/GCCDS"/>+
+</AppModuleConfig>+
+<AppModuleConfig name="TF_RecentSitesServiceShared" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService" DeployPlatform="LOCAL" JDBCName="gccdev" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model">+
+<AM-Pooling jbo.ampool.maxpoolsize="1" jbo.ampool.isuseexclusive="false"/>+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+</AppModuleConfig>+
+</AppModuleConfigBag>+
+</BC4JConfig>+
So, it seems that the Application Module is packaged with the task flow....
Is it normal ?
Regards
Nicolas

It's possible connect different gis software to the same database

hi,
i´m quite new in Oracle, and i supose that the question is so stupid, but....
I want to know if is possible to connect to the same Oracle Spatial database with Arcgis, Microstation, Autodesk Map, etc.
Thanks

If you truly have a need to have multiple GIS packages in the same environment you would probably be more successful with a central repository of spatial data at the center of a hub and spoke configuration.
Each GIS package would sit at the end of a unique spoke with data in the data model of the vendor - not compromising any functionality of the GIS.
Each spoke would connect to the hub with a flow of data back and forth between the GIS and the respositary.
Those GIS packages that 'play well' with spatial can utilize simple triggers to keep their data in synch with what is in the central repository.
Those GIS packages that don't 'play well' (or those that augment the power of Oracle spatial with extensions to the data model, or those that add additional functionality with custom ETYPES) can use ETL routines to keep their data in synch with what is in the central repository.
ETL or triggers should include data validation/data quality checks to avoid corrupting the repository or storing invalid data inside of it.
This way you can keep your data models reasonably intelligent and translate (with semantics) data as it moves from the spokes to the hub and vice-versa.
This allows you to choose the best editing GIS, the best web delivery GIS, the best analytical GIS, the best cartographic and map production GIS (etc) without crippling the functionality they offer with a 'lowest common denominator' data model.
You could also use this same idea with web services (which is where the IT interoperability problem is being solved). A web service sits as the semantic translator between each GIS solution and the central repository. Some GIS packages claim better performance and/or functionality with their own data models and their own data storage mechanisms (and there are some merits to these claims) so the web services approach allows this with a central Oracle Spatial respositary.
*SAFE (the company referenced above in the thread) is the industry leader in spatial ETL and has very easy to use and powerful semantic translation tools. It is interesting that many of the GIS vendors actually use the SAFE technology to power their own 'interoperability' functionality.

Multiple web-app sharing the same database.

hi experts,
If I have several websites running on the same server. Most of the are sub-domains of the same domain, they share the same database, but each sub-domain will have their own web-apps(This also means that they are running on a different java virtual machine, right? ). My question is that how can I make them communicate with each other. Also, will there be any conflict with the database insert/update issues, and How do I solve that?
For example, if one user is already logon from "tips.mydomain.com", then when the users goes to another sub-domain, say "java.mydomain.com", he/she doesn't need to re-login again.
thanks.

Well yes, having databases accessed by multiple users simultaneously is an issue that many many developers have had to face. But the answer to "How do I solve that" doesn't fit in this little box or in the limited time that people have available to answer questions here. It's an extremely complex issue about which entire books have been written.
As to the bit about the subdomains, it is possible to map them to the same web server, as far as I know, but that's a web configuration issue and nothing to do with Java programming.

Multiple connections for the same user.

I have EJB A and EJB B. A and B use a JCA connector that
I have written. I have matchManagedConnections set so that if user U has not used EJB A or EJB B, then a new ManagedConnection is created. If user U has used A or B then that user is given a new virtual connection created from an existing ManagedConnection. Now the problem is that if user U access' A for the first time and then access' B BEFORE A has closed the connection, then a new ManagedConnection is created for user U. Therefore in this case user U gets 2 ManagedConnections to the EIS that we are using. Eventually one of the ManagedConnections is distroyed but I would like to eliminate this in the first place. How do a get Weblogic to see that a user has a ManagedConnection before that user is done with the connection.

You can't have multiple roles on multiple connection, as you are connecting to the same website (different sub directories) ultimately.
Here is the workaround:-
You can create a new user account on your machine and can manage different roles.
Hope it helps.

Is it possible to copy the same database multiple times simultaneously?

This is the setup of my environment.
I have a 'master' database that contains the full schema plus some pre-populated data such as default settings. When database schema changes are made, they get made to the master database. When a new customer signs up for the service, I make a copy of this
master database (using SMO) that will now be the database containing all of the customer's information. The database is rather large, and the copy operation can take a couple minutes.
Everything works fine as expected, unless I try to provision two new customers at the same time. It appears that Azure only allows for one DB copy operation at a time. Is there a way to allow for copying the same database multiple times simultaneously?
Thanks for you input. I understand that this is likely not the optimal setup, and that there is many better ways of doing this, but I am somewhat heavily invested in the current process and I would like to find out how to make it work if I can.

BTW, you can do this programatically by using PowerShell (https://msdn.microsoft.com/en-us/library/ee210569.aspx), SqlPackage (http://www.benday.com/2012/12/18/deploy-a-sql-server-database-projects-dacpac-with-sqlpackage-exe/)
or the SQL Server binaries for .NET (http://www.vijayt.com/Post/Deploying-a-data-tier-application-in-SQL-Azure-programatically)
Hope this helps.
Alex

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

Multiple Backend Connected to the same SRM client.

Hello All,
We have an interesting requirement.
We have an SRM 5.0 client with R/3 4.7 backend. Now we need to add another instance of ECC 5.0 to be connected to the same SRM client ( either on the same org stucture or a different org structure).
I am facing difficulty in doing the material replication.
I have the inbound queue in SRM blocked and I and getting the error message LOGSYS_FOR_GUID_CHANGED.
This lead me to the notes 588701 and 765018. But I am not sure this would actually solve the problem.
I have also seen the following thread which indicated that one CRM client should point to only one R/3 instance.
Downloading basic R/3 objects into CRM with brand new systems
Has any one so for integrated multiple backends to the same SRM client? What was your approch to the requirement? Inviting your views and opinions to this issue.
Thanks in advance.
Ajith

Hi
You can implement corrections in the note 765018 as you mentioned in your post.
We have done the same thing. In case of multiple backends and also if systems are refreshed with other instances (client copy), the logical system ID will be changed.
So we need to run the report mentioned in the said note and run the replication.
Rgds
Reddy

Multiple HTML DB connecting to the same database, in error

Similar Messages

Maybe you are looking for