Multiple instances of WL on the same box :several Ip addresses using the same port
Hi all,
I want to set up several instances of WL on the same server. These
instances will be clustered.
I am using Apache for the WebServer.
Here the configuration I used:
I first change the weblogic.conf file in Apache to set up the bridge.I
restart apache using apachectl.
Then, on the WebLogic site, I created a new ipadress using ifconfig
hme0:1 ip adress ...
I created a file hostname.hme0:1 in /etc
I added this Ip address in /etc/hosts.
I added this Ip address in the mycluster DNS.
I wanted to start both WL manually using startWebLogic.sh file to see
the log file.
So, I first assign hostname to WL1. Then start WL.
I opened an other terminal. Assign the hostname to WL2. Then start using
startWebLogic.sh.
The first instance started correctly.When the second started, there was
an error: when listening to the port 7001, this port was already used.
That was the same with the port 7002.
Then , my question is How is it possible to configure several instances
on the same machine using several ip addresses and one port.
Thank you for your help.
Erwan
Please try -Dweblogic.system.bindAddr=<a.b.c.d> in your startWebLogic.sh.
Brian
"Merg" <[email protected]> wrote:
>> Then , my question is How is it possible to configure
>> several instances on the same machine using several
>ip
>> addresses and one port. Thank you for your help. Eourwan
>
>On Win2K/WinNT you can assign several IP adresses to you
>NIC. (Advanced
>TCP/IP options.) Each server instance has to run on it's
>own port.
>
>Regards,
>Merg
>
>
Similar Messages
-
"you can not use multiple instance of Program at the same time"
Hello @ all,
I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
Maybe, you know what I can do!
Thanks for help!Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.
-
Limit FPS of multiple instances of vmware on the same machine not over IP
Issue: How can I limit the fps of multiple vmachines on the same machine? (not over IP)
I want to run several vmachines on the same physical machine and limit their fps. I'm aware it can be done with PCoIP but this is not over the network.
This is for non commercial use.
Thanks.Please try -Dweblogic.system.bindAddr=<a.b.c.d> in your startWebLogic.sh.
Brian
"Merg" <[email protected]> wrote:
>> Then , my question is How is it possible to configure
>> several instances on the same machine using several
>ip
>> addresses and one port. Thank you for your help. Eourwan
>
>On Win2K/WinNT you can assign several IP adresses to you
>NIC. (Advanced
>TCP/IP options.) Each server instance has to run on it's
>own port.
>
>Regards,
>Merg
>
>
-
Multiple instances of APPS for the same database?
Since upgrading to 11.5.10, we are not able to have multiple instances of APPS open for the same database. Prior to the upgrade we could which allowed a person to have 2 sessions open with different responsibilities, thus not having to switch each time.
Is there a profile setting/patch etc which will allow this again?
thanksIn my case I think the company's main requirement was to have two separate environments (PROD and TEST) open at the same time which I think is fine.
From memory (don't quote me on this) I don't think the old Personal Home Page is supported from 11.5.10.2 or something.
I think another option was rather than have multiple sessions, add the two functions you are trying to access to the same menu/responsibility then you can open both at the same time.
I just use favourites with one forms function from each responsibility and hardly click on or attempt to navigate the responsibility function list ... this mimics the old functionality.
Also created a few "Copy Favourites" concurrent programs to copy favourites from one user to another or to all users of a responsibility.
Re the old vs new feel - I know the feeling ;-) Ages ago I logged an SR to see if the dynamic tree portlet you get when you integrate with Portal could be used within core Apps, but wasn't possible per standard. Also thought of throwing together a greasemonkey script to achieve the same, but haven't gotten round to that ;-) and it wouldn't work with IE ... maybe one of the OAF gurus might read this and have a crack at it ?!
Gareth -
Multiple instances of OC4J on the same machine
Is there a way to cofigure OC4J to have a few processes on the same machine, all listening to the same ports?
My purpose is to develope and deploy a few applications on the same machine, and each application should has its own process, so if onw fails or restarts, it will not effect the other applications and the other programmers.
I don't want to make each application to be bounded to differnt port.
is it possible ?Two instances of oc4j cannot listen to the same port...you will
get an error.
To do this, you will need to cluster oc4j. This is fairly easy,
but you app needs to be "clusterable". All classes need to be
serializable which are used by your servlets. The
<distributable /> tag needs to be in your web.xml file. No
stateful session beans can be used. (sorry, but oc4j doens't yet
support clustering with sfsb's).
The second step is that your default-web-site.xml or *-web-
site.xml file should be set up for clustering. Do this by
creating a cluster-island attribute in your web-site tag. Also
change the port from 8000 to something like 8080 or 8090 or
something else. It should look like this:
<web-site host="192.168.1.101" port="8080" display-name="some-
name" cluster-island="1">
<default-web-app application="someapp" name="someappname" />
<frontend host="192.168.1.101" port="8000" />
<access-log path="../log/some-web-access.log" />
</web-site>
Your server.xml and application.xml will be the same as when you
don't cluster.
Make sure you have 3 different copies of your j2ee/home
directories...of course with different names....like home1 and
cluster.
Edit the rmi.xml and jms.xml files to change the port number
that the home1 oc4j will listen to. The jms port is usually 9127
by default, so use 9128. The rmi port is 23791, so change it to
21792. This will keep the rmi and jms servers from conflicting.
Make sure that the home1 config/default-web-site.xml uses a
different port than 8080, say 8090, but the cluster-island name
is still 1.
Open terminal windows for each instance of oc4j, and start them
in the normal way.... java -jar orion.jar
Open a terminal window for the j2ee/cluster, and issue this
command:
java -jar loadbalancer.jar -host 192.168.1.101 -port 8000
You should see that each of your oc4j instances are recognized.
There...that wasn't so bad, was it?
regards,
the elephantwalker
www.elephantwalker.com -
Problem in creating multiple instance of Jboss running on same machine ???
Hi all
Please tell me steps to create multiple instance of Jboss with diffrent port number.
Actually i want multiple instance of Jboss with different port number running on same machine.
I tried with this steps, but it does not work for me.
In conf/jboss-service.xml i added
<mbean code="org.jboss.services.binding.ServiceBindingManager"
name="jboss.system:service=ServiceBindingManager">
<attribute name="ServerName">ports-01</attribute>
<attribute name="StoreURL">D:/dev/jboss-4.0.2/docs/examples/binding-manager/sample-indings.xml</attribute>
<attribute name="StoreFactoryClassName">
org.jboss.services.binding.XMLServicesStoreFactory
</attribute>
</mbean>
<mbean code="org.jboss.services.binding.ServiceBindingManager"
name="jboss.system:service=ServiceBindingManager">
<attribute name="ServerName">ports-02</attribute>
<attribute name="StoreURL">D:/dev/jboss-4.0.2/docs/examples/binding-manager/sample-bindings.xml</attribute>
<attribute name="StoreFactoryClassName">
org.jboss.services.binding.XMLServicesStoreFactory
</attribute>
</mbean>But i am getting an exception when i am trying to run jboss server
16:49:04,656 INFO [ServiceBindingManager] Using StoreURL: file:/D:/dev/jboss-4.0.2/docs/examples/binding-manager/sample-binding
16:49:04,750 ERROR [MainDeployer] could not create deployment: file:/D:/dev/jboss-4.0.2/server/default/conf/jboss-service.xml
org.jboss.deployment.DeploymentException: Trying to install an already registered mbean: jboss.system:service=ServiceBindingMana
at org.jboss.system.ServiceCreator.install(ServiceCreator.java:70)
at org.jboss.system.ServiceConfigurator.internalInstall(ServiceConfigurator.java:153)
at org.jboss.system.ServiceConfigurator.install(ServiceConfigurator.java:118)
at org.jboss.system.ServiceController.install(ServiceController.java:202)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy4.install(Unknown Source)
at org.jboss.deployment.SARDeployer.create(SARDeployer.java:220)
at org.jboss.deployment.MainDeployer.create(MainDeployer.java:918)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:774)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:722)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:434)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:315)
at org.jboss.Main.boot(Main.java:195)
at org.jboss.Main$1.run(Main.java:463)
at java.lang.Thread.run(Thread.java:595)
Failed to boot JBoss:
org.jboss.deployment.DeploymentException: Trying to install an already registered mbean: jboss.system:service=ServiceBindingMana
at org.jboss.system.ServiceCreator.install(ServiceCreator.java:70)
at org.jboss.system.ServiceConfigurator.internalInstall(ServiceConfigurator.java:153)
at org.jboss.system.ServiceConfigurator.install(ServiceConfigurator.java:118)
at org.jboss.system.ServiceController.install(ServiceController.java:202)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy4.install(Unknown Source)
at org.jboss.deployment.SARDeployer.create(SARDeployer.java:220)
at org.jboss.deployment.MainDeployer.create(MainDeployer.java:918)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:774)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:722)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:434)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:315)
at org.jboss.Main.boot(Main.java:195)
at org.jboss.Main$1.run(Main.java:463)
at java.lang.Thread.run(Thread.java:595)
16:49:05,125 INFO [Server] JBoss SHUTDOWN: Undeploying all packages
Shutting down
16:49:05,156 INFO [Server] Shutdown complete
Shutdown complete
Halting VM
Press any key to continue . . .Please help me on this.
Thanks in advanceThen you haven't followed the method correctly. That error is
addressed specifcally on that site, as that error is the main
reason for the site. Did you read the note about the "known
bug" because of the one port that is not included in the
sample file?
If you had tried the first method (set up a second IP and
started both servers with the command line option providing
an IP) there is no way this error could happen.
If you followed the second method, and specified a different
port for every port listed (including the one that is not in the
sample file per default) then there is, once again, no way that
this error could happen.
The error happens on the second server because it is trying
to bind the same port, using the same address, as the first
server, which is impossible if you fully implement one of the
two methods described there. -
Multiple instances of weblogic pointing to same public_html
Hi,
I am using Weblogic 5.1 and have successfully set it up to start multiple instances
of weblogic from one weblogic server(each instance has its own unique port).
Currently I have multiple instances of public_html (one for each instance). Does
anyone know what I have to do to point all instances of weblogic to a common public_html?
Many thanks in advance
Dipencreate a symbolic link that is called public_html that points to the common
docroot.
"Dipen" <[email protected]> wrote in message
news:3b7cf1bf$[email protected]..
>
Hi,
I am using Weblogic 5.1 and have successfully set it up to start multipleinstances
of weblogic from one weblogic server(each instance has its own uniqueport).
Currently I have multiple instances of public_html (one for eachinstance). Does
anyone know what I have to do to point all instances of weblogic to acommon public_html?
>
Many thanks in advance
Dipen -
Extending Outlook 2013 to multiple instances and profiles under the same user
Hello,
I understand that Outlook 2013 will only run one profile under a logged in user account. can i use Outlook Primary Interop Assembly
to add that ability to outlook 2013 ?
RegardsHello,
Only one instance of Outlook can be run. You can choose the profile programmatically using the
Logon method of the Namespace class. Here is what MSDN states:
Use the Logon method only to log on to a specific profile when Outlook is not already running. This is because only one Outlook process can run at a time,
and that Outlook process uses only one profile and supports only one MAPI session. When users start Outlook a second time, that instance of Outlook runs within the same Outlook process, does not create a new process, and uses the same profile.
If Outlook is already running, using this method does not create a new Outlook session or change the current profile to a different one.
You may find the
How to automate Outlook from another program article helpful. -
Hacking iPhoto, running multiple instances of iPhoto at the same time.
Inspired by Locking Photo Album ... I'm looking for a way to open two iPhoto library folders simultaneously.
1. Copy iPhoto
2. edit /Applications/iPhoto.app/Contents/Info.plist
CFBundleIdentifier com.apple.The Second iPhototo obtain a second preference file
3. Configure iPhoto 1 to use the first library and iPhoto 2 accordingly.
Unfortunately, iPhoto prevents you from launching two apps at the same time:
Caution: iPhoto is already running, Only one copy can be running at a time.
So how can we disable that kind of limitation?
Launching /Applications/iPhoto.app/Contents/MacOS/iPhoto via Terminal doesn't work either.
Thanks in advance!well it is possible, and it is the best solution, but as a side note, to get X applications running as another user you need to:
userthatisrrunningX@myhost ~ xhost +localhost
otheruser@myhost ~ kopete
if you want to run something as root the prefered way to do this in kde is to use kdesu.. -
How to deploy multiple instances of WebLogic on the central server,wl6.0
I would suggest 2 domains each of them for it's own purpose, with an admin and a managed server with the same db connection name connecting to its own database. In this case the only difference is the domain name(has to be unique on a physical server) and the ports will have to be different on QA vs DEV. They could share the applications which can be located outside of both domains, but they will have to be deployed separately. if you want to work with different levels of code than you'll need 2 separate directories for storing the applications.
In fact you should test in QA only after DEV is done with development(?!).
In this situation watch the memory allocation as you can affect one of the domains by doing a lot of work/load on the other one. -
How can I pin multiple instances of Firefox to the taskbar in Windows 7 with different web addresses
I pinned Yahoo Mail to my taskbar by dragging it down from the desktop. When I try to do that with a second address, it doesn't pin the second address, only a second copy of Yahoo mail.
I just set Safari's option to None. That is I right clicked on the dock, selected options, and chose none. Also, in Mission Control's tab of System Preferences I clicked Off When switching to an application, switch to a space with open windows for that application. That let me open a new Safari window no matter what desktop I was in. But I had to do both. Just setting the desktop option to none didn't seem to do it. Finder seems to work okay with just the none option set.
-
Need to access the receiver to set up internet radio. Followed instruction in receiver owner's manual
See:
* http://www.mozilla.org/projects/netlib/PortBanning.html
* http://kb.mozillazine.org/network.security.ports.banned.override -
Note I also need to be able to install an active x feature.
See http://www.mozilla.org/projects/netlib/PortBanning.html
* http://kb.mozillazine.org/network.security.ports.banned.override -
Clustering multiple instances on the same server
I've read reports of people clustering multiple instances of weblogic on the
same machine to better utilize the CPU of that machine.
So if I wanted to set up a cluster with four machines and two instances of
weblogic running on each (port 7001 and port 8001) , what properties do I need
to send into the startup command for the servers?
How do you set this up
Thanks in advanced.
-rrc
Russell Castagnaro
Chief Mentor
SyncTank Solutions
http://www.synctank.com
Earth is the cradle of mankind; one does not remain in the cradle forever
-Tsiolkovsky
Do this for all your four machines
1) Create dirs: cluster1, cluster2 under %WEBLOGIC_HOME%
2) Create dirs: cluster1\myserver, cluster2\myserver
3) create two startup scripts,
specify -Dweblogic.cluster.enable=true -Dweblogic.cluster.name=cluster1 (or
cluster2) in each script.
4) Speicfy weblogic.cluster.multicastAddress=IPAddr in
cluster1\weblogic.properties & cluster2\weblogic.properties, use different
IPAddr for these two cluster.
5) Specify weblogic.system.listenPort=7001 in
cluster1\myserver\weblogic.properties & weblogic.system.listenPort=8001 in
cluster2\myserver\weblogic.properties
6) If your machine is multi-homed, specify weblogic.system.bindAddr in
cluster1(and/or cluster2)\myserver\weblogic.properties.
my 2cents.
Cheers - Wei
Russell Castagnaro <[email protected]> wrote in message
news:[email protected]...
> I've read reports of people clustering multiple instances of weblogic on
the
> same machine to better utilize the CPU of that machine.
>
> So if I wanted to set up a cluster with four machines and two instances of
> weblogic running on each (port 7001 and port 8001) , what properties do I
need
> to send into the startup command for the servers?
>
> How do you set this up
>
> Thanks in advanced.
> -rrc
> --
>
> Russell Castagnaro
> Chief Mentor
> SyncTank Solutions
> http://www.synctank.com
>
> Earth is the cradle of mankind; one does not remain in the cradle forever
> -Tsiolkovsky
>
>
-
Multiple instances of ColdFusion Builder on the same system?
Hi Folks,
Four of us work remotely in my company. It is not uncommon for us to all remote desktop into a system reserved for our use and three of us be using CFEclipse at the same time. We recently installed ColdFusion Builder on this system and found that it would only allow one instance of ColdFusion Builder to run. When attempting to start a second instance CFBuilder would show the flash screen and then nothing more.
Is anyone aware of workarounds or other changes that will enable us to run multiple instances of CFBuilder on the same system?
Thanks in advance,
Thomas WoestmanWill look into this issue.
But for now as a workaround, whenever you want to launch CF Builder if there is .bolt file please delete the .bolt it from
C:\Program Files\Adobe\Adobe ColdFusion Builder\ . And you will be able to launch it even while other has kept it open.
Thanks,
Krishna
Maybe you are looking for
-
ORA-00600: internal error code, arguments: [ktsircinfo_num1]
While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors. . . exporting table TEST4 EXP-00003: no storage definition found for segment(29, 371385) SQL >Drop table test4 cascade; ORA-00600: internal er
-
Auto Po create at a time of shipment
Hi, Experts, I want create Automatic PO at a time of save shipment, But i don't know it's releted configuration. Can anybody tell me, It's Configuration Regards: Happy
-
Hi All , I have created a ALV report in that displaying three different reports on three radio buttons.These three reports uses same selection screen except 2-3 fields. Now our customer wants to create two t-codes for the same report one for first r
-
when i connect my iphone 5 with new ios7 i get an error message telling me that the iphone will be restore to the factory settings
-
my n80 takes ages to send a text, like 5 mins, and seizes up whilst sending so i can't do anything else, is this just my phone or a common issue? it also switches itself off and on and it just a bit odd sometimes but i can live with that, just want t