Multiple Issues with the MSI board...

This is my first experience with the MSI board and so far its not very smooth... I have this MSI NEO 2 standard board My specs are
P4 2.8C
256 MB (single module) DDR 400 RAM. (TWIN MOS)
Geforce Ti4200..
80 GB Maxtor SATA
FAX
CD-ROM
WIth WINDOWS XP HOME Edition..
i have done no overclocking and the problems are..
1. First of all it takes lot of time to show the first screen... like the vga card screen comes after 4 seconds.
2. Some time i press the power button and when the system is detecting the hard disk and CDROM it gives error message like DRAM timings are too tight. i have check the BIOS setting and everything is normal and there is no overclocking and RAM is rated to run at 400 MHz.. although not a great brand but not a bad one either..
3. Sometime just before loading the operating system it gives an error message that No boot sector found.. insert a Bootable floppy or CDROM.. and when i restart it start going on as usual..
So wot are the causes of these problem .. i think mainboard is the main culprit... i have scanned my system with 2 anti virus and there is no virus..
any suggestions..?
Thanks..

Quote
Originally posted by Eddio1
I've been reading the posts here for about a week and I decided to finally ask for some assistance. Just picked up the MSI 865PE Neo2-V from BZBOYZ.COM and 1Gb generic matched Elixir 512's and I've tried dozens of bios settings as posted here. I was finally able to install 2003 ent. server and if I'm lucky, it will get past the 2003 splash screen to a login screen, I'll log in, then put it to work (you know browse some heavily populated folders) it freezes and a reset is necessary. Now, I cant even get past the splash screen. I must have booted 200 times with every bios combination and I'm tired of doing fresh installs and experiencing the same system freeze issues. I've been in the IT business and built dozens of boxes in the past and never had such problems (using bios failsafe defaults no less!) getting an OS to install and run in a reasonably stable fashion. Mobos these days are extremely frustrating! I'm going to pick up some Corsair twinx RAM and hopefully this will resolve. Any ideas would be greatly appreciated in advance of more waiting and RMAing the RAM I have for some Corsair. Do you think I'm on the right track because I'm gonna be really pissed if new RAM doesn't do the trick.
Bios settings:
Bus mastering enabled
Configured RAM manually in bios 3-4-4-7-8 (tried PSD to no avail)
Disabled dynamic o/c
Disabled spread spectrum
Normal speed
HT enabled
All other settings bios setup defaults
MoBO specs:
MSI 865PE Neo2-V latest bios: Version 5.4 Update date 2004-7-5
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=612
P4 3.2 Prescott
400 FSB
1Gb Elixir PC3200 RAM (I suspect this cheap RAM is the issue)
Memtest says it runs at 3-3-3-8
I configured it manually in bios (per some previous posts) to run 3-4-4-7 (only way to get a boot)
Native for SATA/ATA
PS-Enermax EG365P-VE FCA-3.3V-32A, +5-32A, +12-26A
ATI Radeon 8500 64MB
Seagate SCSI Cheetah-36Gb 15K 160Mb/s
Seagate SCSI Barracuda-73Gb 10K 160Mb/s
Adaptec 29160N
Boot to Adaptec then floppy then CD
HI check my previous thread, entitled problem after udate of xp, or look for threads with name on Sounds like a similar problem.

Similar Messages

Having Multiple Issues with the 3.0 firmware update.

Just thought I would share a copy of my feedback here to see if anyone else is having some of the 5 issues I am having since I upgraded. I have been "using" (more like fighting with) the 3.0 update since its release. Here is what I sent to apple (most of it):
+I purchased the 3.0 update almost the day it was released. I have now used my iPod Touch a couple of months and I must say that there are some serious issues that need to be addressed, and soon. And a google search seems to show I am not the only one with problems, including those listed in your very own forums. So in order to make sure that I go through proper channels, I will list them here:+
+1) WiFi Connectivity. Since the upgrade, my iPod drops wifi connections for no apparent reason. Wifi says its connected and can't access pages. It seems to turn on/off randomly, even when I am only 5 feet from the router. I have followed directions for resetting the network, restarting my router, wiping the iPod and even did a complete restore of the 3.0 firmware. Still the same issues. These were not issues in version 2.2.1.+
+2) YouTube (or more aptly the application that plays YouTube videos) keeps hanging up. The progress bar that shows how much of the video has been buffered will go somewhere between 30 and 75 percent complete, then hang. the video will play to that point and stop. In order to get past that point I have to close the video app and reload the clip, then I have to move the location "dot" to where it stopped so it will buffer from there. If I do not move it, guess what, it stops at the same exact frame the second time around. Also the buffer progress moves forward, and then sometimes jumps all the way back for no reason. This was not an issue in 2.2.1.+
+3) Screen rotation seems to only work about 2/3 of the time. Sometimes in Safari, I will rotate the screen and it will still say where it was and my only remedy is to restart Safari.+
+4) Battery life is shorter. Now I know the batteries wear out over time, but a 30% decrease in battery life since the very day I installed the update is not coincidence. I have disabled push applications and even wifi, and still have a decrease in battery life with no change in use. Again, this was not an issue in 2.2.1+
+5) System hang-ups. Even with just the apps that come with the iPod (no 3rd party apps from App Store) I still get system locks that force me to power off the ipod and restart it. Even with almost all my ipod full of App Store apps and audio/video I did not have this problem in 2.2.1+
+I have read the forums, tried the apple posted fixes and still have not seen any of these problems resolved. My frustrations with the iPod Touch 3.0 upgrade have left me with a sour Apple taste in my mouth.+
+To be very honest, I am a PC person. Many have tried to convert me to Apple. The iPod was a business tool so I could carry videos with me to show prospective clients what I could do, even make an impromptu demonstration. I refuse to use AT&T as a carrier, so an iPhone was out of the question. Up until 3.0 I was quite happy with my iPod, now it is left home on my desk more than in a pouch next to my cell phone. After all the hype about Apple being so much better than a PC for reliability, service and stability, I cannot say that I am very impressed. It may be a long while before I try another Apple product.+

+1) WiFi Connectivity. Since the upgrade, my iPod drops wifi connections for no apparent reason. Wifi says its connected and can't access pages. It seems to turn on/off randomly, even when I am only 5 feet from the router. I have followed directions for resetting the network, restarting my router, wiping the iPod and even did a complete restore of the 3.0 firmware. Still the same issues. These were not issues in version 2.2.1.+
You probably did everything except upgrading your router or your router firmware. 3.0 is very sensitive to outdated router firmware and will exhibit the problems you have experienced.
+2) YouTube (or more aptly the application that plays YouTube videos) keeps hanging up...
See #1. YouTube functionality is highly dependent on WiFi connectivity.
+3) Screen rotation seems to only work about 2/3 of the time. Sometimes in Safari, I will rotate the screen and it will still say where it was and my only remedy is to restart Safari.+
Mine has done this a few times as well. A restart or reset usually corrects the problem.
+4) Battery life is shorter. Now I know the batteries wear out over time, but a 30% decrease in battery life since the very day I installed the update is not coincidence. I have disabled push applications and even wifi, and still have a decrease in battery life with no change in use. Again, this was not an issue in 2.2.1+
There have been sporadic problems reported but I have never experienced anything like this. Restoring the iPod as new will rule out software issues.
+5) System hang-ups. Even with just the apps that come with the iPod (no 3rd party apps from App Store) I still get system locks that force me to power off the ipod and restart it. Even with almost all my ipod full of App Store apps and audio/video I did not have this problem in 2.2.1+
Again, a restore as new will correct 99+ percent of these. You can always force kill an app by holding down the Home button until you return to the home screen. This will keep you from having to restart.
+I have read the forums, tried the apple posted fixes and still have not seen any of these problems resolved. My frustrations with the iPod Touch 3.0 upgrade have left me with a sour Apple taste in my mouth.+
Apple doesn't post fixes except in the Tech Library. Search Support and you will find lots of helpful articles to correct issues.
+To be very honest, I am a PC person. Many have tried to convert me to Apple. The iPod was a business tool so I could carry videos with me to show prospective clients what I could do, even make an impromptu demonstration. I refuse to use AT&T as a carrier, so an iPhone was out of the question. Up until 3.0 I was quite happy with my iPod, now it is left home on my desk more than in a pouch next to my cell phone. After all the hype about Apple being so much better than a PC for reliability, service and stability, I cannot say that I am very impressed. It may be a long while before I try another Apple product.+
This is really too bad. I've used PCs for years and really never have suffered too badly from the experience - but I'm a fanatic about keeping my OS updated, virus scans current, and firewalls working. And throw in malware scans as well. I've also found most users don't have a clue how to keep their PCs "clean".
A year and a half ago, I bought an iMac and could not be happier and less worried about all of the potential PC threats out there.

Multiple issues with the 928?

I recently switched from an iPhone to a Lumia 928. As soon as I did I started having problems. Some of them have been outlined here, like it being stuck in headphone mode. Also, when I shut mine off it turns back on immediately, and the signal goes from great 4G to no service while sitting in the exact same spot. But, I didn't get my phone from Verizon, I bought it from a friend. Is there any fixes to these problems, and would Verizon replace my phone?

We certainly want you to have the very best device experience. I can confirm warranty does not carry over if previously active on another account. Let's troubleshoot further! Did these concerns start as soon as you activated device or after installing apps and updates? Does there appear to be any dirt or lint in headphone port?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

Anybody else having issues with the new 1.1??

For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
Anybody else??

I tried both, and was successfull both times.
External Edit:
1. I selected 2 images (D200 RAW images).
2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
3. Both images opened in Photoshop.
I can't image it being system specific. What camera and file type are you using?

I have an issue with the address browser in mail in Yosemite

I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
Previously in my pending to send email toolbar there was a contacts icon which I clicked on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
Any suggestions?
Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
Cheers,

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

Sync multiple computers with the same mailbox

Hello all,
I am using a Bold and syncing with MS Outlook 2007. I have it on both a desktop and my laptop (laptop being the first computer I used). I have tried to sync but am having issues with the calendar as I am getting multiple items, some items are being deleted randomly and others aren't syncing.
Any suggestions please? I have tried changing the default device and that made it worse!
Matt

what Niel said is correct.
however, there might be a (semi) workaround. check this thread for pointers: http://discussions.apple.com/message.jspa?messageID=11524444#11524444.
JGG

XOQ-01950: Cube contains multiple BuildSpecifications with the same name.

Hi All ,
While executing the Maintain Cube option it is throwing below issue : Any Clue ?
XOQ-01950: The AWCubeOrganization for cube "NN_OLAP_POC.MARKET_SALES_CUBE" contains multiple BuildSpecifications with the same name.
Thanks,
DxP

This error should only show up when you create a cube (by importing XML), not when you maintain it. So I will assume that this is what you mean.
If you import XML that refers to an OLAP object that already exists, then the new definition overrides the old one. The only exception to this rule is the BuildSpecification object. This kind of object is named, but it does not follow these conventions (for messy implementation reasons). If you import XML that has a BuildSpecificaiton with the same name as one that already exists, then you will trigger the error you see. Here is an example of the relevant XML.
<BuildSpecifications>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
) ]]>
</BuildSpecifications>The workaround is to delete this section from the XML before importing it.

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

After installing 2014.3 my site had multiple issues with Google Chrome

After installing 2014.3 my site had multiple issues with Google Chrome. After I rebuilt the home page in 2014.3 the site is still not well. With the old software the site worked well with all the browsers and loaded incredibly. Despite Adobe's claim of a faster load with the new software it is much slower and in Chrome at times it won't load up at all.
The home page had two "Video-Animation light box galleries" by Visual pictures company. One had 12 videos, the other 3 videos. All the videos were streamed from Vimeo. There was also an Edge Animate animation in the middle of the page imported as a .oam file. the rest of the page was nothing special except using some web fonts. Again, these elements worked together well before the update.
After the update everything loads slower in all browsers and in Chrome all types of weirdness happened. Videos would play randomly, all of the audio from all the videos played as the site loaded. Videos would play in the wrong place. Instead of my animation playing a video from the galleries played in it's place instead.
I rebuilt most of the home page using a new video gallery and that helped some what but when I placed the animation.oam file in the page had new issues. To survive, I've taken the Animation out which helped but the functionality is still far from being acceptable. My boss is un my backside, other work is not getting done the stress level is through the roof because I was the one who encouraged using all these new Adobe tools (which I'm paying for personally). Now you broke it with a new update. This is not the first time I've been caught out with problems with updates. I couldn't use SpeedGrade for months following an update. ADOBE MUST VET THEIR

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

HT4623 iOS 8 version 8.1.2 issues with the calendar displaying wrong TIME ZONE!

I just updated to iOS 8 using version 8.1.2 and am having issues with the calendar. I use my GMAIL calendar and sync to my iPhone and now any calendar entries that I add from my phone display the current time zone AND GMT time. Entries that were already there display correctly. New entries entered from the GMAIL calendar also display correctly. The issue is with NEW entries entered on my PHONE into the calendar. This is very annoying and causes problems for new entries that need EDITED. Once opened to edit it defaults to GMT time! WRONG!! I have turned off the automatic time zone feature and Time Zone Override in Settings but it's still WRONG! There are multiple reports of this online so I would like to know when/if it will be corrected or if there is a fix! Please help!!

Quite the same problem here, GMT, UTC.......
Why when they do an update they don't check it completely???

Having Difficulties with the Paste Board Server (PBS)

Hello!
I have having difficulty with the paste board server with extensive use of QuicKeys v3.1.1. I have a repetitive process that draws data from FileMaker Pro 8.0v3 to populate variables in QucKeys via the clipboard. The data is then used by QuicKeys to control automated processes in a FileMaker Pro 6.0v3 solution. After about 8,000 copies, pastes, assign variable, and use variable processes, the pbs dies and is no longer usable in any application. I cannot copy, cut, or past after that. A log out or restart is required to get the clipboard working again.
I found an old reference to this (dating back to December of 2004) on the Mac OS X HInts website. It reads as follows:
I may be an unusual case, but I have a repetitive problem with Apple's Paste Board Server (pbs) dying on a semi-regular basis. The main symptom is the inability to copy and paste between applications. Logging out or rebooting will fix the problem every time, but a less disruptive solution is to spawn a new copy of /System -> Library -> CoreServices -> pbs. Some apps will connect to the new server automatically, though many (notably Firefox and TextEdit) need to be quit and restarted before they start working normally again.
How can you tell if pbs is dead? Open a Terminal window and run:
ps x | grep pbs
If pbs is dead, you'll see something like:
350 ?? Z 0:00.00 (pbs)
22200 std R+ 0:00.01 grep pbs
If pbs is alive, you'd see:
350 p4 S 0:00.29 /System/Library/CoreServices/pbs
22200 std R+ 0:00.01 grep pbs
If you see (pbs) in parentheses, it's dead! Zombied to be technical. If you see the full path to pbs listed out, then pbs is running fine. If you see both, then chances are you've already restarted pbs manually at some point since you last logged out or rebooted.
If your pbs is dead, you can starte a new one. Just open a Terminal window and type:
nohup /System/Library/CoreServices/pbs &
I have tried the above to no avail. When I check the pbs using the terminal command as stated above, I get the ??, but I also get the full path and no (pbs). Starting a new pbs does not seem to work. This info, of course, being 2 years old may no longer be relevant.
My sense is that the constant use of the automated processes eventually reaches some limitation of the pbs and it needs to be reset. I'd love to be able to do this from time to time in the form of an AppleScript or Terminal command during the process.
Any help on this would be much appreciated
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.4) quicKeys v 3.1.1

Opened a case with apple, they were able to reproduce the error.
"Dear Marly,
I finally was able to get it to go to the point where I could try and purchase the allowance, and I received the same error that you initially reported. Now that we have finally been able to confirm that it is something specific to the account, I am going to open an investigation into what is causing it and report back as soon as we have resolved the issue. "

What's with the MSI support?

I bought a MSI-K8N Platinum about 6 weeks ago and since that day I've had nothing but trouble with my wireless network. As I'm not one of those who gives up instantly I figured that I might solve the (what seems to be software)-problems on my own or at worst with the guidance of MSI:s cunning support. It seems that I was severly mistaken though.. I've posted in two threads in this very forum without any answer and I've mailed the MSI support concerning my issue without any luck. Now it seems that my hard work has payed off with a mainboard that it's too late to reship and with an useless wireless network that cost me another 200$ of my hard earned student-salary.
When can I hope to get an answer to my questions? Or any response at all for that sake?
Here's links to the threads concerning this issue:
https://forum-en.msi.com/index.php?topic=66928.0
https://forum-en.msi.com/index.php?topic=25278.0
Furthermore I'm still waiting for the support to contact me. I would very much like to get to use my high-end equipment before it's yesterdays news...
Sorry if this thread makes me come of as a b**ch, but it seems that I'm not getting attention with this matter of mine. I'm sure the support and this forum is an excellent node for other concerns.
// Klab0

In Reply to syar 2003:
I've already had my wireless network for a while and it (still) works perfectly with my old Abit m0b0. It consists of a D-link DWL-G520, D-link DWL-G650 and a D-link DI-624 accesspoint.
In Reply in general:
I've tried with belkin for my workstation but it seems to be in conflict with my other D-link products. Hence I don't want to mix network brands because as you say, they usually has quite poor compability, and for another thing I would like to be able to use the "boost"-functions available when using all D-link Etreme G products (Extended range and "108Mbs"). It seems quite odd to me that pretty much every D-link product except my DWL-G520 is supported by my mainboard, and since I know for a fact that there's nothing wrong with the card I'm led to beleive that the problem has something to do with my software configuration.
Problem specifics:
I've updated to the latest mainboard and ethernet drivers for my mainboard, I have NOT installed digicell though since I figured it would be messy with two separate programs trying to configure my wireless network. I've deactivated the firewire, GbLAN and ethernet in the BIOS without any result. I've tried with the PCI-card in PCI-slot 5 and 4 (the orange one optimized for wireless networks and the one next to it.) The system seems to find the card with the right drivers and it seems to work perfectly except for one thing: I can't achieve contact with the acesspoint.
In one of the threads i hijacked the person who made the thread said that he solved the problem, so I'm still hoping to work this thing out somehow. What I'm really wondering is if there's some basic mistake (a BIOS-setting etc) that often comes up as a problem for lamers like me when setting up a wireless network with this mainboard. I will try with the MSI wireless PCI-card that came with the mainboard if I can't solve it with my existing DWL-G520, but it is really a pain in the a** since I suppose it will only lead to compabilityproblems with the acesspoint instead.
If anyone has a slightest clue, please don't hesitate to mention it. It might as well be something very basic that has been overlooked. Thanks guys.

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

Multiple Issues with the MSI board...

Similar Messages

Maybe you are looking for