Multiple Positions for One Employee (OrgChart Campaign)

I am trying to determine if the OrgChart campaign offering will meet the needs of my client. They have an interesting setup where they assign one employee to multiple positions (example: 50% to one position, 50% to another position, etc). I want to confirm that the OrgChart campaign offering will pick this up and reflect each position and its holder even if the holder is represented in another org unit attached to another position. I assume this is possible since it uses the O-S-P relationship search but since we have trouble with some of the standard SAP reports returning only one position I just wanted to check.
Thank you!

Hi there,
Before I start you may wish to use TVN OrgChart 2.1 which was recently released on Service Marketplace as it contains all the functionality of the Accelerated Campaign offering with a bit more functionality and some bug fixes from TVN2.0.
OrgChart's standard functionality in this area is to show a node (box) for each position. Where two or more people sit in the same position it shows a node for each of these employees.
In your scenario where a person sits in two positions within different orgunits, OrgChart will represent this as two nodes - one in each orgunit.
I hope that helps!
Luke

Similar Messages

MULTIPLE POSITIONS FOR SINGLE EMPLOYEE

HI EXPERTS,
I AM AN ABAPER AND NOW I AM WORKING WITH HR DEPT .I HAVE TO BRING MANY POSITIONS TO A SINGLE EMPLOYEE.
EX) RAM WILL BE THE AAST MANGAER FOR FINANCE AND BUSINESS EXECUTIVE AND WILL BE ONE AMONG THE BOARD OF DIRECTOR.
SO WHEN WE CREATE ACTIONS WE CAN CREATE ONLY ONE POSITION AT A TIME .
SO HOW TO CREATE MULTIPLE POSITIONS FOR A SINGLE EMPLOYEE.???

Hi,
You can assign multiple position to single employee, based on the Employment Percentage in IT001, you can assign multiple position.
This concept is especially called Concurrent Employment. Assigning of multiple position, in Concurrent Employment, SAP has developed in such a way that, it will synchronize your Work schedule and show it one screen and payroll will calculate the amount from various assignment.
I have posted the Wiki about the Concurrent Employment in the Wiki section. If you want go through that, you will get little idea.
Good Luck
Om
Reward it, if u feel helpful.

Headcount report when multiple position for an employee at particular time

Hi
I have to develop a headcount report which will show the employee count by each personal area. Now i can simply bring in headcount data from the R/3 by standard source system. My problem is that one employee can have multiple position at a time. In standard routine every record is assigned headcount by 1. Now problem is that there are multiple records for an employee as multiple position are assigned at the same time which will lead to wrong headcount.
Thanks
Kamal

Hi Kamal,
Can you write your report off of 0EMPLOYEE or did you change the key to include position? Just include employee group and employment status to determine who your active employees are.
Brian

Multiple position for one central person and one user

Dear Guru's,
I have a requirement to create multiple position for a existing User - which already has CP Central Person and S Position.
How to create this new position and assign the same CP to all the new positions ?
Thanks and regards,
Anil Rajpal

Hi
Yes you can definitely do this
Create the new position and assign the CP to this position in transaction PPOME. You may find the position first there in PPOME, and then drag-drop the CP over the position to make the assignment. System will ask the percentage of responsibility.......which you will ve to enter...
Regards
Virender Singh

Is It Possible To Create Different Personnel Number For One Employee

HI Experts,
My Client need to get Different Personnel number for one employee,i.e for Trainee one Personnel number need to generate and same person when moving from Trainee to Probation another new personnel number should generate and again when same person move from Probation to Permanent another new personnel number should generate.
1. How to generate 3 different Personnel number for One employee?
2. How these 3 Personnel number should get linked, if want to get report for this one employee?
Kindly help me.
Thanks,
Lavanya
Message was edited by: Sikindar A

Hi Lavanya,
Your requirement can be fulfilled but not recommended...
As you want to generate different position number at different stage of employment....
i.e Trainee to Probation to Permanent...
First go for Trainee Position Hiring .... and generate first Number Say 5000000
Then suppose employee complete training after 1 Yrs.. then again go PA 40 enter date as 01.01.2015 say... & execute... & give Ref. Personnel Number (5000000) & different position number... this time...
This will link up all the personnel date from previous hiring record... & as per your need you can modify it.... Finally one more number be generated....
Similarly,, you can do for Permanent employee...
Once training or Probation period gets completed you can lock/ separate that employee number
Report ...
You can get necessary details in IT0031...& with different Position numbers which you will using at different stage of hiring...
Hope this should sort your issue..
Regards,
Veeram

How to make RECORD for saving multiple rows for each employee..

Hi,
How can I create a record for saving multiple rows for each employee... (parent child relationship)
I have created all required fields, then created a record, and then created a page. in that page i dragged-n-dropped a scroll area on that page and dropped all required fields from record into that scroll-area.
whats is happening that its saving ONE (the first) record fine, but for the second record its not storing EMPLID for that row..
Will I have to make some change at RECORD level ?
OR Will i have to make some configuration in parent component ?

Hi, the problem is solved. The record will be created in same way. just create more then one keys (allowing to make composite key in DB table)

Absences not deducted from Absence Quota for One Employee

Dear Friends,
I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
But for Sick Leave absence type, it is updating in his absence quota records...
I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
I couldn't understand what will be the reason? Can anyone shed light on this issue?
Thanks in advance,
Sai Narayana,
SAP Functional Consultant.

Hi JS,
I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
I found -
1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
Thanks,
Sai

Income Tax not Calculated for one employee.

Hi experts,
we have updated our patch lvl upto 86. Budget Changes Note is applied already. Now the Problem is with one employee.
Out of 1000 employees for one employee /436, /446 and /450 generated correctly with correct figure. But /460 is not generated.
I can see in the log /451 is generated with the amount exactly as /450.
Why system is not generating /460?
Can anyone guide me?
Regards
Nasim

Well the reaults are surprising as cross financial arrear /616 is only 1385.96 and relief generated by this is 18776. Which is simply not possible. Even in FY 2010-2011 relief should not be generated as relief only comes when employee is end up paying more taxes than last year tax on arrears. Now since tax slabs are increased, relief will not be egenrated.
This issue you can check with OSS message.
IF you want to deactivate the Section 89 relief implementation switch S89SW constant as 0 in table V_T511K. It may also activated on employee level, then you need to check IT0588/ subtype 4. Before deactivating it check out the impact after deactivation in case of retro as i may increase/ decrease the past tax.
Please note that implementation level switch supposed to be activated/ deactivated only once in lifetime of SAP system.

When attempting to view the date track history for one employee, errors out

Hi All
When I attempt to view the date track history for one employee, it gives errors.
To get the details, the navigation is :
1. Search for employee xxxxxx
2. click on Assignment button
3. click on Date Track History.
4. Receive error APP-DT-52554.
5. Click OK on error message
6. click on Full History button.
7. Receive error APP-PAY-06153
What could be the problem and how to solve this?
Regards
Rahman

Sounds as if there is an inconsistency with the date tracked records. Can you check the records through TOAD or SQL Plus?
Have alook at MetaLInk article 343070.1 which refers to the second error message.
Regards
Tim

Offcycle run and stopping the bank transfer for one employee

Hi,
Please help with a soultion....
Jan 25th 2011- OFFCYCLE RUN
Jan 26th 2011 u2013 OFFCYCLE RUN .Bank Transfer
Jan 26th 2011 u2013 Realised that no need to pay one additional bonus for one employee.
Stop payment for one employee .Amount (1000 $) in IT0267 dated on 25th Jan 2010.
How to correct the payroll / How to adjust this amount? (Client donu2019t want to DELETE PY CULSTER)
Pls note the following:-
1) If I am running a correction done with -1000 $ amount in IT0267 with a different date then system generate a /561 for the next run. (Feb payroll run).Then it will deduct from the actual salary.
2) If I am deleting IT267 and rerun the offcycle then correction is not happening.

Hi,
For correcting this problem, 2 ways are-
1. Delete 267 entry and during next regular run system will take care accordingly means system will adjust /411, /418, /460 and obviously the net payment.
2. Another way is to run off-cycle type 'B'. See note : 431473
Regds.
Suman

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Multiple Labels for One Order

Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

Hi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai

Multiple Positions for One Employee (OrgChart Campaign)

Similar Messages

Maybe you are looking for