Multiple processing of the recon events

Hello, my friends.
I have a terrible issue and i hope, that you could help me to solve it.
My system info is:
Solaris OS 10
Weblogic 10.3
IDM 9.1.0.2 bp12
I perform trusted recon with SAP HRMS (it doesn't metter, becouse it happens every recon).
Thus i get two cases:
1. When event is linked and all pre insert handlers (adapters) executed without errors or exceptions. In this case everything is ok and user is created.
2. Event is recieved, but there are some errors during it processing (some of pre-insert adapters throws an exception).
In this case i get default error (ERROR [XELLERATE.JMS] Processing Reconciliation Message with ID 3725 failed.)
But after that, the processing of event didn't stop and continues more and more times and it don't going to finish.
So, more and more times it throws the pre-insert adapter exception and the error, that i mentioned before. And the only way to stop it is closing the event.
Any ideas? What the reason of this issue? May be something with JMS queue?
Thanks in advance, Dimitry.

There is a schedule taks which re-processes all the recon events in the Event Received state. It automatically runs unless explicitly disabled.
Just disable this Schedule Task -> Resubmit Reconciliation Event and you should be good

Similar Messages

  • HT1198 If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own

    If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own iPhoto application??

    Have you read this Apple document regarding sharing a library with multiple users: iPhoto: Sharing libraries among multiple users?
    OT

  • Multiple processes in the workflow

    Hello Everyone.
    Why do we require multiple Processes in a single Workflow? I see that in the seeded workflows, if i open a process, in the flow there will be another process which again might contain several different process attached to the same flow.
    In realtime when do we require to use this functionality?
    Thanks

    It is not a requirement - it is simply a way of modularizing - just like how any piece of code can call other pieces of nested codes.
    Srini

  • In FCPX, how do I use multiple clips of the same event?

    This is a beginner question, but having recently moved from Final Cut Express to FCPX, I am having trouble using 3 clips (church play, 3 cameras) of the same event (and reading through the manual has not helped me). I have lined them up in the timeline, one "on top" of the other, but the viewer only shows the top clip. I would like to see what the other clips look like and use the cutting tool and opacity (which I found) to choose the best view (and move between the clips lined up with the audio). It feels like I am trying to use an old work flow on a new product. How do I view the all the clips and move between them?

    Here is one of those free tutorials (in two parts), which , IMO, is particularly good.
    There is also, of course, more comprehensive paid training available that may better fit your needs.
    Good luck.
    Russ

  • Create a CR for multiple processing with me as the current processor

    Hi
    How to create a change request for multiple processing with myself as the current processor.
    I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
    Display help shows the below
    For the upload you need a change request that has the status Considered
    and Approved or To Be Revised and ideally has a type that does
    not have the property Object List Is Binding. If the
    change request does have this property, all the entities that are uploaded must
    already be assigned to this object list.
    Please can someoen guide me on how to fix this.
    I found few threads related to this but cudint understand on how to assign a status to CR
    Thanks,
    Sharma

    Hi Prateek,
    Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
    For assigning the statuses to the change request:-
    Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
    the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
    how can i set myself as the processor.
    tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
    Single object is already Unchecked  and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
    Thanks
    Hi Shephalika,
    Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
    Thanks,
    Sharma

  • Process matched in Recon Manager

    hi,
    i am getting status of user as Process Matched after recon. when i click on the Establish Link of the process match tree the user gets linked. the user is having multiple privledges. i have gone though the forum posts. and found that by clicking estalbish link the user gets linekd. wanted to know if there is any way that we can automate this to avoid the manual process. i am having one process match found   Establish Link recon rule in RO

    which connector which target?
    May be the recon events are not being finished in the recon task

  • Linked Recon event does not show up in user's provisioned resources

    I am totally new at this Orcale OIM stuff and I have looked through this forum and have not found an answer. I have configured the connector and and (I think) successfully ran the EBS_TR_User task limiting it to one specific user. It runs and I do not see any errors. It did create an entry in the Recon Event Manager in the design console and the event indicates that the EBS user is "linked" to the expected OIM user. The recon event also shows the responsibility that is in EBS for the user. However, what I do not understand is that when I look at the user in OIM and select to display the resource profile for the user, the responsibility does not show in OIM.
    Why does it not show in OIM? Is there something I am missing to cause it not to appear? Or is there another step I need to complete to make it appear? Or does it just not ever appear? Does anyone know what to do after the EBS_TR_User scheduled task runs or where I can find information on this? Any insight or direction is greatly appreciated !!

    Well take care of Martin's Suggestion to first of all identify that its Trusted Source or Target Resource model of reconciliation you are running. This is how you can identify that:
    - Check it against the Connector Documentation Or
    - Go to the Resource Object against which you are running this reconciliation. Check the Trusted check box. If this is checked then you are running Trusted Mode and in this case you won't be able to see those Responsibilities in the Resource Profile of Users.
    Now if the above condition is not true and the mode is not Trusted then make sure you have the following rule condition defined.
    One Entity Match Found -> Establish Link
    One Process Match Found -> Establish Link *(For Later on identification of same Account)*
    Thanks
    Sunny

  • OIM 10G recon event is not affected by pre-update handler

    Hi.
    im trying to modify a value from trusted source before the user is modified.
    but the reconciliation message is processed and updates the user data before the pre-update handler is triggered
    How can I trigger the pre-update handler before the recon event updates the user data?
    Thank you.

    HI

  • Child Table data not coming in custom recon event.

    Hi All
    I have a requirement where I have to create a recon event from the custom java code. There is one attribute which is a multii valued attr. Now I am able to create the recon event but have not been able to bring the child table data to the event.
    following is the code I am trying with oimclient. countryList is the multi vlue field in the child table. On running I am getting "current Status" = Data Recieved and getting the employeeID, accessType and businessJust values with the even but not countryList
    HashMap record = new HashMap();
    record.put("employeeID", "test" + ran.nextInt());//"test1841519422");
    record.put("accessType", "testXXXX");
    record.put("countryList", "India");
    record.put("businessJust","Faltoo");
    HashMap record2 = new HashMap();
    record2.put("countryList", "India");
    long createReconciliationEvent;
    createReconciliationEvent = reconAPI.createReconciliationEvent("RO Name", record, false);
    System.out.println("Event: " + createReconciliationEvent);
    reconAPI.addMultiAttributeData(createReconciliationEvent,"countryList",record2);
    System.out.println("check2");
    reconAPI.providingAllMultiAttributeData(createReconciliationEvent,"countryList", true);
    System.out.println("check3");
    reconAPI.finishReconciliationEvent(createReconciliationEvent);
    System.out.println("closing successful2");
    Please let me know what else I should do, or what I am doing wrong

    What version of R2 or R2PS1? What is the exact patch level? There is an open issue on R2- with some BP &  PS1 (upto BP02 I think) where the issue occurs when there are multiple application instances of the same resource object. Do you have same scenario? If so what are the names of the application instance form names in the sandbox? Make sure you use the same form name for both the application instances in the sandbox.
    As long as the UD_ tables (both for parent and child) are filled up, it should be displayed in the child form of the resource under the accounts tab. The values from the child table are shown in the entitlements tab only if the child table column is marked with entitlement=true and you have run the entitlement list job.
    -Bikash

  • Recon Event Deferred Status

    Hi,
    When a new user data is sent from peoplesoft (Trusted source) with future start date, workforce sync message is in not process until start date, leaving it in "Event Deferred" Status.
    I have experienced that with SAP connector we can disable the feature to wait till start date for Recon event to be processed and Link the event which creates user with status "Disabled until start date".
    Is there a similar solution with PeopleSoft ER connector? I have tried to find it in Connector documentation but could not find it.
    Please help me find the solution for this.
    Thanks in Advance.

    Hi,
    To process future dated events which are in 'Event Deferred' status you need to write custom scheduled task.
    Search for reconciliation event with 'Event Deferred' status and iterate through Result set and get Reconciliation event key and future date (Reconciliation Manager.Future Date)
    then check number of days difference between current date and recon future date and as per your business requirement you can process the recon event.
    to process future dated recon event you need to set status to 'Event Received' because with status "Event Deferred" OIM does not process them.
    HashMap<String,String> updateMap = new HashMap<String,String>();
    updateMap.put("Reconciliation Manager.Status", "Event Received");
    //update Recon Event data
    reconUtility.updateReconEvent(reconEventKey, updateMap);
    //then process reconciliation event - reapply matching rules
    reconUtility.processReconciliationEvent(reconEventKey);
    Try this. It will work. Let me know if you need more information
    Thanks,
    Pallavi Chaudhari

  • OIM11gR1 - Trusted recon event going to Data Received status

    Hi All,
    I am trying to do a trusted recon for an existing user in OIM and the recon event always goes to Data Received status.
    Everything looks good on the data side and no exceptions in the logs. It's almost 10 times that every recon event is stuck in Data Received status.
    Anybody had similar issues ? Please suggest any solution....
    Thanks..

    If you have a lot of events, they will process when they get to the batch amount specified in your system configuration.  If you are doing individual recon events with code, you will want to make sure to use the callingEndOfJobAPI() to complete the event.  If your scheduled task is not completing successfully, it might not be triggering the processing at the end.  And also, if the data is extremely large, you might have a stuck thread in the batch processing which has caused it to fail to process.
    -Kevin

  • How can I combine multiple variations of the same library?

    While I have become accustomed to the new Library format/function there are still things that boggle my mind.  Case in point is that I now somehow have multiple versions of the same event showing up although I didn't create them.  And there is also a combination of 2 separate events that I just don't understand.  My current main concern/question is how to combine the duplicitous events?:
    At the top you'll see "Perlick" as the Library and "Beer Cooler" as the Event.  Then down below there is the "Perlick 20140502_1515_CDT".  When I opened the media drive that contains the Perlick event I found a total of 3 "extra" libraries with various long titles as the one just listed.  So, my question is can I somehow combine all of this into one, all-inclusive Library and if so, how?
    Thanks in advance...

    Hello There,
    Try and use tcode VT01N.
    Provide the collective shipment there
    and then click on deliveries & select multiple deliveries there.
    Hope it can assist you
    Thanks & Regards
    JP

  • OIM 11g: Form Version of Linked Recon Event

    If an old reconciliation event is linked (Ad-hoc link) to a user, what form version is given to the form?
    The current active version?
    The active version at the time the recon event was created?
    Based on our testing, it appears as though #2 is the answer. Somehow the form version at time of recon is retained, and given to the form when the recon event is linked.
    Is this expected behavior? In our environment we'd like for #1 to be the case, and we can't seem to find a way to prevent this from happening. (The FVC util doesn't seem to help here).
    How can we ensure any linked recon events always get the current active form version?
    Thanks

    If anyone else is running into this, the "current" and "active" form versions are stored in the recon profile XML files. So, if you update a form version, you need to also regenerate the recon profiles to bring them up to the current active version.

  • OIM 11gR2 - Recon event succeeded but accounts not listed

    Hi,
    We are creating recon event for custom connector in 11gR2 using ReconOperationsService.createReconciliationEvent. I see that the recon event is getting created without any issues, but the application instance is not listed in the Accounts tab of user. we have created the application instance also for the specific RO.
    Also, userOperationsIntf.getObjects(usr-key) returns the resource object, so the resource is assigned to user but not listed under accounts tab.
    any clue will be greatly appreciated. thanks!

    Hi Rajiv,
    I'm getting below exception when I use name of the application instance in the createReconEvent,
    CGC: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/db/CustomResAppInst"
    Where CustomResAppInst is the name of my application instance

  • OIM 11g R2 - Recon events not getting linked

    Hi,
    In OIM 11g R2,recon events are not getting linked.The recon events are getting struck in "Data Received" status.When I tried to clicking "Reevaluate Event",then getting the message "Cause: Status of the batch is not 'Completed'. Any idea on what might be going wrong?Thanks.

    The problem is not yet solved.could see the below error in the logs
    Caused By: oracle.iam.platform.tx.OIMTransactionException: java.sql.SQLException: ORA-01422: exact fetch returns more than requested number of rows
    ORA-06512: at "DEV_OIM.XL_SP_RECONBLKCHILDMTHACNTCRUD", line 730
    ORA-06512: at "DEV_OIM.XL_SP_RECONBLKACNTRQDCMTCHCRUD", line 91
    ORA-06512: at line 1
         at oracle.iam.platform.tx.OIMTransactionManager.execute(OIMTransactionManager.java:28)
         at oracle.iam.reconciliation.dao.ReconActionDao$1ReconDBCall.command(ReconActionDao.java:1423)
    Any idea what might be going wrong ? Thanks.

Maybe you are looking for