Report RCATS_DISPLAY_ACTIVITIES to add new fields

Hi SAP Gurus ,
I have a req to add new fields from a table ZCS_ENGINE to the report RCATS_DISPLAY_ACTIVITIES .
I copied the program and create a Z report ZRCATS_DISPLAY_ACTIVITIES , but i am facing difficulties to add new fields
to the fieldcatalog.
Can u please tell the procedure to add fields into the layout and show the output ..
Advance Thanks,
Thanks,
AMS
Moderator message: too vague, please describe problems in all technical detail when posting again, what is "difficulties", is it classical, ALV, class based ALV, what have you tried so far, please search for available information on fieldcatalog and layouts before asking.
Edited by: Thomas Zloch on Oct 19, 2010 3:28 PM

hi,
as per your requirement (3 fields you mentioned )not inthe standard .you have to contact technical team for new report or enhance ment.
regards
muthuramand

Similar Messages

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

How Do I add new fields to Repeating Frames in existing Report

Hi,
How do I add new fields to Repeating Frames in existing Report. The Report has 2 GRPFR, 1 HDR and 2 Repeating Frames. I would like to add a new field(column) to inner most repeating frame. I added the new golumn to QUERY and GROUPs in Data Model. After adding the new column to inner most Repeating Frame in Layout Model, the Layout model is losing all other frame and it is showing only the modified one.
How do I add new column to repeating frames without disturbeing other frames.
Any hellp will be appreciated!!!!!!!!!!!.
I am using Oracle Reports 6i.
Thanks,
Ravi.

you must work in your layour editor
expand your repeating frames do it more big
for add your new items or field. after you inserted or add, can you put more little your repeating.
too can you to do one copy of one field in your repeating frame and assign it in his source your new item in your data model.
normally i begin with the principal frame and go one by one internally.

Can we add new field to inventory Warehouse Report

I have to add new field name "Desc in Frgn from Item master data" to inventory Warehouse Report
How can I do that

Hello,
IN print out (PLD) yes, in SAP b1 form not possible.
Regards
János

How add new field in layout in RDF using XML report definition

Hi, ALL
Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

hello,
in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
regards,
the oracle reports team

How to add new field at standard report,?

Hi expert,
How do i find an easy way to add new field using this tcode s_alr_87012332 ?

Hi,
In order to add a custom fields , please chech the enhancement MM06E005.
Here, you can get includes in which you can place ur field.
Hope this helps.

I want to add new field to this list

hi all,
i want to add new field to this list.
kostenstelle from table zfmkstel
*& Report ZFM_MOBLIST                                                 *
REPORT ZFM_MOBLIST.
TABLES: zfm_handy , pa0002.
TYPE-POOLS : slis.
DATA: g_repid LIKE sy-repid,
      gs_print            TYPE slis_print_alv,
      gt_list_top_of_page TYPE slis_t_listheader,
      gt_list_end_of_page TYPE slis_t_listheader,
      gt_events           TYPE slis_t_event,
      gt_sort             TYPE slis_t_sortinfo_alv,
      gs_layout           TYPE slis_layout_alv,
      gt_fieldcat         TYPE slis_t_fieldcat_alv,
      fieldcat_ln LIKE LINE OF gt_fieldcat,
      col_pos TYPE i.
*DATA : BEGIN OF it_moblist OCCURS 0.
       INCLUDE STRUCTURE zfm_handy.
*DATA : nachn TYPE pa0002-nachn,
       vorna TYPE pa0002-vorna,
     END OF it_moblist.
DATA : BEGIN OF IT_MOBLIST OCCURS 0,
       TELNUM TYPE ZFM_HANDY-TELNUM,
       KARTNR TYPE ZFM_HANDY-KARTNR,
       ZUTART TYPE ZFM_HANDY-ZUTART,
       PERNR TYPE ZFM_HANDY-PERNR,
       nachn TYPE pa0002-nachn,
       VORNA TYPE pa0002-vorna,
       ZDATE TYPE ZFM_HANDY-ZDATE,
       PINNR TYPE ZFM_HANDY-PINNR,
       PUKNR TYPE ZFM_HANDY-PUKNR,
       TARIF1 TYPE ZFM_HANDY-TARIF1,
       TARIF2 TYPE ZFM_HANDY-TARIF2,
       TARIF3 TYPE ZFM_HANDY-TARIF3,
       GTYPE TYPE ZFM_HANDY-GTYPE,
       IMEI TYPE ZFM_HANDY-TARIF1,
        twincard type zfm_handy-twincard,
        twinbill type zfm_handy-twinbill,
        einbau type zfm_handy-einbau,
        beschr type zfm_handy-beschr,
        text1 type zfm_handy-text1,
         text2 type zfm_handy-text2,
          text3 type zfm_handy-text3,
          end of it_moblist.
DATA : BEGIN OF IT_zfm_handy OCCURS 0,
     TELNUM TYPE ZFM_HANDY-TELNUM,
     KARTNR TYPE ZFM_HANDY-KARTNR,
     ZUTART TYPE ZFM_HANDY-ZUTART,
     PERNR TYPE ZFM_HANDY-PERNR,
     ZDATE TYPE ZFM_HANDY-ZDATE,
     PINNR TYPE ZFM_HANDY-PINNR,
     PUKNR TYPE ZFM_HANDY-PUKNR,
     TARIF1 TYPE ZFM_HANDY-TARIF1,
     TARIF2 TYPE ZFM_HANDY-TARIF2,
     TARIF3 TYPE ZFM_HANDY-TARIF3,
     GTYPE TYPE ZFM_HANDY-GTYPE,
     IMEI TYPE ZFM_HANDY-TARIF1,
      twincard type zfm_handy-twincard,
      twinbill type zfm_handy-twinbill,
      einbau type zfm_handy-einbau,
      beschr type zfm_handy-beschr,
      text1 type zfm_handy-text1,
       text2 type zfm_handy-text2,
        text3 type zfm_handy-text3,
        end of it_zfm_handy.
*DATA : BEGIN OF it_zfm_handy OCCURS 0.
       INCLUDE STRUCTURE zfm_handy.
*DATA END OF it_zfm_handy.
DATA : BEGIN OF it_pa0002 OCCURS 0,
        pernr TYPE pa0002-pernr,
        nachn   TYPE pa0002-nachn,
       vorna     TYPE pa0002-vorna,
       pernr TYPE pa0002-pernr,
       END OF it_pa0002.
INITIALIZATION.
g_repid = sy-repid.
PERFORM print_build USING gs_print.      "Print PARAMETERS
START-OF-SELECTION.
PERFORM data_selection.
PERFORM build_fieldcat.
PERFORM eventtab_build CHANGING gt_events.
PERFORM comment_build CHANGING gt_list_top_of_page.
PERFORM call_alv.
*&      Form TOP_OF_PAGE
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_list_top_of_page.
WRITE: sy-datum, 'Page No', sy-pagno RIGHT-JUSTIFIED.
ENDFORM.                    "TOP_OF_PAGE
*&      Form END_OF_PAGE
FORM end_of_page.
WRITE: /.
WRITE AT (sy-linsz) sy-pagno CENTERED.
ENDFORM.                    "END_OF_PAGE
### PRINT SETTINGS
FORM print_build USING ls_print TYPE slis_print_alv.
ls_print-print              = ' '. "PRINT IMMEDIATE
ls_print-no_print_selinfos = 'X'. "NO SELECTION INFO
ls_print-no_coverpage       = ' '. "NO COVER PAGE
ls_print-no_new_page        = ' '. "NO NEW PAGE
ls_print-no_print_listinfos = 'X'. "NO PRINT LIST INFO
ls_print-reserve_lines      = 2.   " FOOTERLINE
ENDFORM.                    "PRINT_BUILD
*&      Form data_selection
      text
--> p1        text
<-- p2        text
FORM data_selection .
data : n(8) type n.
SELECT * FROM
             zfm_handy
       INTO CORRESPONDING FIELDS OF TABLE it_zfm_handy where pernr ne space.
IF NOT it_zfm_handy[] IS INITIAL.
    loop at it_zfm_handy.
      n = it_zfm_handy-pernr.
      it_zfm_handy-pernr = n.
      modify it_zfm_handy.
    endloop.
    SELECT pernr nachn
           vorna
     FROM pa0002
     INTO TABLE it_pa0002
     FOR ALL ENTRIES IN it_zfm_handy
     WHERE pernr = it_zfm_handy-pernr and endda = '99991231'.
   SELECT pernr nachn
          vorna
    FROM pa0002
    INTO TABLE it_pa0002
    FOR ALL ENTRIES IN it_zfm_handy
    WHERE pernr = it_zfm_handy-pernr and begda le sy-datum and endda ge sy-datum.
ENDIF.                              " not it_zfm_handy
LOOP AT it_zfm_handy.
    MOVE-CORRESPONDING it_zfm_handy TO it_moblist.
    clear it_pa0002.
    READ TABLE it_pa0002 WITH KEY pernr = it_zfm_handy-pernr.
    if sy-subrc = 0.
      move it_pa0002-nachn to it_moblist-nachn.
      move it_pa0002-vorna to it_moblist-vorna.
      move it_pa0002-pernr to it_moblist-pernr.
    ENDIF.
    APPEND it_moblist.
    CLEAR   it_moblist.
*endif.
ENDLOOP.
ENDFORM.                    " data_selection
*&      Form BUILD
      text
--> p1        text
<-- p2        text
FORM build_fieldcat .
Explain Field Description to ALV
DATA: fieldcat_in TYPE slis_fieldcat_alv.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'TELNUM'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'TELNUM'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'KARTNR'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'KARTNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'ZUTART'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'ZUTART'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PERNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PERNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'NACHN'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'NACHN'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'VORNA'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'VORNA'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'ZDATE'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'ZDATE'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PINNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PINNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PUKNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PUKNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF1'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF1'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF2'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF2'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF3'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF3'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'GTYPE'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'GTYPE'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'IMEI'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'IMEI'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TWINCARD'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TWINCARD'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TWINBILL'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TWINBILL'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'EINBAU'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'EINBAU'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'BESCHR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'BESCHR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT1'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT1'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT2'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT2'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT3'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT3'.
APPEND fieldcat_ln TO gt_fieldcat.
DATA SORTING
DATA: gs_sort TYPE slis_sortinfo_alv.
CLEAR gs_sort.
gs_sort-fieldname = 'TELNUM'.
gs_sort-spos      = 1.
gs_sort-up        = 'X'.
GS_SORT-SUBTOT    = 'X'.
APPEND gs_sort TO gt_sort.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'KARTNR'.
GS_SORT-SPOS      = 2.
GS_SORT-UP        = 'X'.
*GS_SORT-SUBTOT    = 'X'.
APPEND gs_sort TO gt_sort.
ENDFORM.                    " BUILD
*&      Form EVENTTAB_BUILD
      text
     <--P_GT_EVENTS text
FORM eventtab_build CHANGING lt_events TYPE slis_t_event.
CONSTANTS:
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gc_formname_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = lt_events.
READ TABLE lt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_top_of_page TO ls_event-form.
    APPEND ls_event TO lt_events.
ENDIF.
define END_OF_PAGE event
READ TABLE lt_events WITH KEY name = slis_ev_end_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_end_of_page TO ls_event-form.
    APPEND ls_event TO lt_events.
ENDIF.
ENDFORM.                    " EVENTTAB_BUILD
*&      Form COMMENT_BUILD
      text
     <--P_GT_LIST_TOP_OF_PAGE text
FORM comment_build CHANGING gt_top_of_page TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
DATA: today_date(10) TYPE c.
CONCATENATE
sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO today_date.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'MOBLIST DETAILS'.
APPEND gs_line TO gt_top_of_page.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'Date:'.
gs_line-info = today_date.
APPEND gs_line TO gt_top_of_page.
GS_LINE-KEY = 'User:'.
GS_LINE-INFO = sy-uname.
APPEND gs_line TO gt_top_of_page.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'ACTION'.
APPEND gs_line TO gt_top_of_page.
ENDFORM.                    " COMMENT_BUILD
*&      Form CALL_ALV
      text
--> p1        text
<-- p2        text
FORM call_alv .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
   is_layout = gs_layout
   it_fieldcat = gt_fieldcat
     it_sort = gt_sort
     it_events = gt_events
     is_print = gs_print
   TABLES
     t_outtab = IT_MOBLIST
   EXCEPTIONS
     program_error = 1
   OTHERS = 2.
ENDFORM.                    "CALL_ALV.

Hi,
add:
1) to IT_MOBLIST
text3 type zfm_handy-text3,
kostl type csks-kostl,
end of it_moblist.
2)...
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'KOSTL'.
fieldcat_ln-tabname = 'IT_MOBLIST'.
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'KOSTL'.
APPEND fieldcat_ln TO gt_fieldcat.

Query: How to add new fields in ABAP query?

Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?

What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

How to add new fields to a data extract

The following data extract program generates an output file which is displayed using a publisher template as a check format report.
Oracle Payments Funds Disbursement Payment Instruction Extract 1.0
How would I add new fields to the generated file? In other words what is the procedure to add new fields to the data extract?
Thanks

Do anyone pls advise how to customize the payment extraction program? We also have the similar requirement to extract extra fields to format a payment file.

Add new field infotype "z" in logical database selection screen pnp

Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
Thanks

In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
    DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
          wa_texpr TYPE rsds_expr,
          lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
          wa_rsds_expr_tab LIKE rsdsexpr.
    REFRESH lt_rsds_expr_tab.
    wa_rsds_expr_tab-arity = '0'.
    wa_rsds_expr_tab-fieldname = 'OBJID'.
    wa_rsds_expr_tab-option = 'EQ'.
    wa_rsds_expr_tab-low = p_aroper.
    wa_rsds_expr_tab-high = '00000000'.
    MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
    APPEND lt_rsds_expr_tab.
    REFRESH lt_texpr.
    wa_texpr-tablename = 'PA9004'.
    wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
    MOVE-CORRESPONDING wa_texpr TO lt_texpr.
    APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM

Want to add new field in QA32/QA11 transaction under inspection lot stock

Dear Experts,
I want to add new field in QA32 transaction under inspection lot stock tab or under characteristic tab.
The reason behind is: Depends upon UD decision i want to assing customer name. So already we are having one Z Report for all the lots against this lot we have to display customer name.
So in order to fetch customer name in the Z report we want to assing customer through F4 selection in the usage decision screen.
I know this is possibe for Make to order scenario, but our senario is make to stock.
Please advice your valuable inputs.
Regards.

Hi Sujit,
Can you please elaborate it,coz i'm using the same but if i place the break-point in PBO of sub screen,the break-point won't be triggered.and is there any additional step to get the data from function group? if yes, please explain me indetail.
If possible please provide the sample code for this.
Thanks Inadvance.
Madan
Edited by: Madan.ngt on Mar 3, 2011 7:16 AM
Edited by: Madan.ngt on Mar 3, 2011 7:17 AM

Need to add new fields in transaction UDM_DISPUTE.

Hi Friends,
This is regarding UDM_DISPUTE transaction in FSCM.
I need to add new fields (drop down lists) in transaction UDM_DISPUTE.
Program Name: SAPLSRMCLFRM2
Screen Number: 100
Can any one please suggest me with the name of exit using which I can add these new fields.
Or another way through which I can add these new fields viz., BADI or classes.
Thank You in Advance!
Regards,
Tejaswini

Execute the below code to find the userexits the t-code is using
REPORT yuserexit_vin NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct. DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'PROG' AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'FUGR' AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab WHERE pgmid = 'R3TR' AND object = 'SMOD' AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ', 20(20) p_tcode, 45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline, 2 'Exit Name', 21 sy-vline , 22 'Description', 95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt WHERE sprsl = sy-langu AND name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline, 2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
* *---End of Program

Add new fields in Additional data tab B in Inquiry,

HI,
I want to add additional new fields in inquiry on the addition tab -B, like
Architect Name
Contractor name
followed By
referenced by like this, and want to capture the report on these fields
plz guide
thanks in advace

Dear Rishi,
Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
Try with these User Exits,
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

Add new fields in the header of RFITEMAR

hi,
i want to add new fields in the header of RFITEMAR report ,so first i copy i to zRFITEMAR ,then i want to add
" Total Quantity " in the header after City field .
can any one help me????????
please ,, i waiting your answers..
thank you......

hi ,
thanks for your response , but first i try to copy the function then it give an error as it is reserved for sap , so i change it's name and copy it and change function group to z also then it relese an error for function pool , any way.
where can i make change in that function .
and how can i copy it . please tell me every think in more detials.
waiting
thanks.

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

Report RCATS_DISPLAY_ACTIVITIES to add new fields

Similar Messages

Maybe you are looking for