Multiple ResultSets from the same connection occuring at the same time

Is it possible to have the following code? The issue is that you are iterating through two result sets created from the same connection at the same time.
try {
Connection conn=createConnection();
Statement s=conn.createStatement();
ResultSet rs=s.executeQuery(someSQL);
while (rs.next()) {
     Statement s2=conn.createStatement();
      ResultSet rs2=s2.executeQuery(someOtherSQL);
      while (rs2.next()) {
           //do something
} catch (SQLException sqle) {
} finally {
freeConnection(conn);

Joel,
The code compiles, but I have not tried running it. It is a question I need to know, designing a program.
The question is whether some error would come up or the first ResultSet would be corrupted because a second were created before the first one was closed.
--Gabe                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced.

    My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced. Is it internal battery for both, new logic board required, bad hard drive, or bad RAM?
    Help.

    Run an Apple Hardware Test using the original installation disk that has the AHT instructions on it.
    Try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    It is possible that you may need a new PRAM battery.
    Ciao.

  • The error 600 occurred in the current database connection "LCA".

    Hi All,
    User is executing job /SAPAPO/TS_REALIGN_COPY in background,  as soon as the job is released its failing with runtime error:
    I check the Note 1126394 but not relevant.
    Runtime Errors         DBIF_DSQL2_SQL_ERROR
    Exception              CX_SY_NATIVE_SQL_ERROR
    Date and Time          18.08.2011 00:03:39
    Short text
         An SQL error occurred when executing Native SQL.
    What happened?
         The error 600 occurred in the current database connection "LCA".
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    How to correct the error
        Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in
         SAPTS_COPY_DA"
        Database error code........: 600
        Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_COPY_DATA"
        Internal call code.........: "[DBDS/NEW DSQL]"
        Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DBIF_DSQL2_SQL_ERROR" "CX_SY_NATIVE_SQL_ERROR"
        "/SAPAPO/SAPLOM_TIMESERIES" or "/SAPAPO/LOM_TIMESERIESU20"
        "/SAPAPO/OM_TS_DATA_COPY"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
    Information on where terminated
        Termination occurred in the ABAP program "/SAPAPO/SAPLOM_TIMESERIES" - in
         "/SAPAPO/OM_TS_DATA_COPY".
        The main program was "/SAPAPO/TS_RLG_COPY_SINGLE ".
        In the source code you have the termination point in line 57
        of the (Include) program "/SAPAPO/LOM_TIMESERIESU20".
        The program "/SAPAPO/SAPLOM_TIMESERIES" was started as a background job.
        Job Name....... "/SAPAPO/TS_REALIGN_COPY"
        Job Initiator.. "CIBERNLAPO2"
        Job Number..... 00015100
        The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
         in
        procedure "/SAPAPO/OM_TS_DATA_COPY" "(FUNCTION)", but it was neither handled
         locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "/SAPAPO/SAPLOM_TIMESERIES "; its source code
         begins in line
        1 of the (Include program "/SAPAPO/LOM_TIMESERIESU20 ".
    Kindly suggest any notes or is any setting needs to be modified.
    Regards,
    Kaasi

    Hello Ada,
    the job was aborted due:
    Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in 
         SAPTS_COPY_DA"
        Database error code........: 600
        Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_COPY_DATA"
        Internal call code.........: "[DBDS/NEW DSQL]"
        Please check the entries in the system log (Transaction SM21).
    From the posted dump.
    Was it lack of OMS heap memory, memory leaking, program error or huge data selection for application run it's not clear. It will be best for SAP customer to create the SAP message and get SAP support when application canceled due Database error BAD_ALLOCATION in  LCA routine.
    Regards, Natalia Khlopina

  • I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought

    I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought? Can any one help

    You have the iPhone in your profile, but people's profiles here are often incomplete or very outdated.  It's better to be specific.  And part of the problem is that I can't find any Belkin composite cables for connecting an iPhone to a TV, either on the Apple Store or the Belkin site.  The closest I found is this Belkin video cable, which doesn't specify exactly what kind of connection it is.
    For the most relevant assistance, you've got to post in the iPhone forum and specify the cable by providing a link to exactly which cable you're using.

  • The error "-10401" occurred in the current database connection "LCA"

    Hi everyone,
    I installed livecache 7.7 with scm7.0,when i did postinstallation  Initialization or run t-code lca03,i got error dump as below.now the livecache states is good.in scm server I not installed package Lcapps.please help give your advise,thank you so much.
    untime Errors         DBIF_DSQL2_SQL_ERROR
    xception              CX_SY_NATIVE_SQL_ERROR
    ate and Time          01/20/2010 03:26:32
    Short text
        An SQL error occurred when executing Native SQL.
    What happened?
        The error "-10401" occurred in the current database connection "LCA".
    How to correct the error
        Database error text........: "Conversion of parameter/column (1) would tru
         data"
        Database error code........: "-10401"
        Triggering SQL statement...: "EXECUTE PROCEDURE "APS_PLAN_VERSION_GET""
        Internal call code.........: "[DBDS/NEW DSQL]"
        Please check the entries in the system log (Transaction SM21).
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:

    Hi Natalia,
    thanks for you much help,the livecache version is 7.7.02,so I will try to upgrade to 7.7.04,thank you.
    Server Utilities    d:/sapdb/programs      7.7.02.08     64 bit    valid
    DB Analyzer         d:/sapdb/programs      7.7.02.08     64 bit    valid
    PCR 7301            d:/sapdb/programs      7.3.01.21               valid
    PCR 7500            d:/sapdb/programs      7.5.00.42     64 bit    valid
    SAP Utilities       d:/sapdb/programs      7.7.02.08     64 bit    valid
    APO LC APPS         d:/sapdb/k1p/db/sap    6.00.004      64 bit    valid
    Base                d:/sapdb/programs      7.7.02.08     64 bit    valid
    Redist Python       d:/sapdb/programs      7.7.02.08     64 bit    valid
    JDBC                d:/sapdb/programs      7.6.03.02               valid
    Messages            d:/sapdb/programs      MSG 0.5010              valid
    ODBC                d:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 77           d:/sapdb/programs      7.7.02.08     64 bit    valid
    Database Kernel     d:/sapdb/k1p/db        7.7.02.08     64 bit    valid
    Loader              d:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC              d:/sapdb/programs      7.7.02.08     64 bit    valid
    Fastload API        d:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 76           d:/sapdb/programs      7.6.01.15     64 bit    valid

  • The error "-10709" occurred in the current database connection "LEA"

    Hi,
    I've Updated forecast and I have the followoing error message,
    (/SAPAPO/MMSDP)
    Database error text........: "Connection failed (RTE:protocol error)"
    Database error code........: "-10709"
    Triggering SQL statement...: "EXECUTE PROCEDURE LCK_DEQUEUE_OWNER"
    Internal call code.........: "[DBDS/NEW DSQL]"
    Please check the entries in the system log (Transaction SM21).
    the error "-10709" occurred in the current database connection "LEA"
    just after it was ok .
    I knwo LEA is the lock table to the liveache, is there parametes tied to the lock (like R/3 enque/table...?)
    Does someone have an idea of this issue (which happened regulary for the first time this morning, we're SCM 5.0)
    Best Regards,
    John

    John,
    It looks like a support pack issue.
    Check this post, maybe it will help:
    the error "-10401" occurred in the current database connection "LCA"
    Let me know if this was helpful.
    Abhi

  • How can i resolve the -1 error occuring during the iphone restoring process.

    how can i resolve the -1 error occuring during the iphone restoring process.

    hi ive also got the same probblem ive had it working last night but then after 2 hours of working it decided to put the phone back into recovery mode plus its an unknow error (36) Ive tried to connect to i tunes and it started to recovery and wipe the to put it back into factory settings then came up with the error 36  can any one help

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing  the windows machine network.  What is the reason thia is happening?windows

    When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing  the windows machine network.  What is the reason this is happening?windows

    Are you using DHCP to allocate IP addresses via your router or Static IP allocation?
    You may have an IP conflict in your network.
    Check on your various network configuration parameters in your iPad, PC and WiFi router.

  • I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    I had a similar problem.  Here is how I resolved the issue.
    1.  Remove Network Connect
    2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
    3. Reboot the machine and reinstall Network Connect
    4. Test if you can now connect.
    During removal, you may encounter permission denied error, you will need to change the permission to 777.  For example "sudo chmod 777 nc".

  • My iPad3 loses the 3g connection after closing the magnetic cover.

    My iPad 3 loses the 3g connection after closing the magnetic cover.  When the cover is opened, the iPad shows the connection is active.  However, it does not connect but searches for emails etc.  I have to then reboot.

    have you tried disabling then reabling the 3G setting on your iPad after waking the iPad?
    It may be that as it goes to sleep the iPad loses the 3G connection, you may be in a low connection area, and then has problems finding it again, this can happen occassional with WiFi.
    If you go into Settings, then Mobile Data and toggle  the On/Off switch Off, then On again, see if that brings it back without restarting the iPad.

  • I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

    I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

    Make sure your network has 802.11b activated. The G3 only supports the "B" wireless networking protocol. Modern networking is "G".

  • OniPhone 6 Plus. Connectinge 6 Plus. Connecting Bluetooth to my Prius bluetooth has been successful However, I am unable to answer or place calls via the bluetooth connection even though the connection has been established. Can anyone help with this?

    With my new iPhone 6 Plus. Connectinge 6 Plus. Connecting Bluetooth to my Prius bluetooth has been successful. However, I am unable to answer or place calls via the bluetooth connection even though the connection has been established. It worked well with my previous iPhone 4S. Can anyone help with this?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Prevent multiple users from updating coherence cache data at the same time

    Hi,
    I have a web application which have a huge amount of data instead of storing the data in Http Session are storing it in coherence. Now multiple groups of users can use or update the same data in coherence. There are 100's of groups with several thousand users in each group. How do I prevent multiple users from updating the cache data. Here is the scenario. User logs-in checks in coherence if the data there and gets it from coherence and displays it on the ui if not get it from backend i.e. mainframe systems and store it in coherence before displaying it on the screen. Now some other user at the same time can also perform the same function and if don't find the data in coherence can get it from backend and start saving it in coherence while the other user is also in the process of saving or updating. How do I prevent this in coherence. As have to use the same key when storing in coherence because the same data is shared across users and don't want to keep multiple copies of the same data. Is there something coherence provides out-of-the-box or what is best approach to handle this scenario.
    Thanks

    Hi,
    actually I believe, that if we are speaking about multiple users each with its own HttpSession, in case of two users accessing the same session attribute in their own session, the actually used cache keys will not be the same.
    On the other hand, this is probably not what you would really like, you would possibly like to share that data among sessions.
    You should probably consider using either read-through caching with the CacheLoader implementor doing the expensive data retrieval (if the data to be cached can be obtained outside of an HTTP container), or side caching with using Coherence locks or entry-processors for concurrency control on the data retrieval operations for the same key (take care of retries in this case).
    Best regards,
    Robert

  • Cannot read multiple resultsets from transaction datasource

    I get a SQL exception "This object was closed() and cannot be used anymore."
    when I try to access the first row of the second result set from a stored procedure.
    This occurs when the code is running within an EJB using a transaction-capable
    datasource hooked to a connection pool that uses the MSSQLSERVERv7 JDriver
    to talk to SQL Server 7.0.
    I noted that the resultset class used is weblogic.jdbc20.rmi.SerialResultSet.
    The error occurs during the resultSet.next() call even though the resultset is
    not null and getUpdateCount() returns -1.
    However, the same code works correctly when run in a simple main() procedure from
    the DOS command line, connecting directly to the database using only the classes
    supplied with the JDriver product. The resultset class used in this case is
    weblogic.jdbc.mssqlserver4.TdsResultSet.
    The stored procedure is very simple, it just has two lines: SELECT 'Hello' and
    SELECT 'World'. The Java code follows.
    <PRE>
    // ... code to get the connection ...
    CallableStatement callableStatement = connection.prepareCall("{CALL spTest}");
    callableStatement.execute();
    ResultSet resultSet = callableStatement.getResultSet();
    if ((resultSet != null) && resultSet.next())
    System.out.println("Row from first result set:" + resultSet.getString(1));
    callableStatement.getMoreResults();
    resultSet = callableStatement.getResultSet();
    if ((resultSet != null) && resultSet.next()) // this call to next() throws the
    exception
    System.out.println("Row from second result set:" + resultSet.getString(1));
    resultSet.close();
    callableStatement.close();
    connection.close();
    </PRE>
    I am running WL5.10sp11 with mssqlserver4v70sp11 on NT4.0sp6a and JDK1.3.0_02
    (HotSpot Client VM).
    Regards,
    Tom B.

    Tom Bechtold wrote:
    >
    Joe,
    Here is the debug messages and trace with your diagnostic jar.
    I hope this helps - Tom
    we got Hello
    java.sql.SQLException: java.lang.Exception: ResultSet originally closed at:
    at weblogic.jdbcbase.mssqlserver4.TdsResultSet.close(TdsResultSet.java,
    Compiled Code)
    at java.lang.Exception.<init>(Unknown Source)
    at weblogic.jdbcbase.mssqlserver4.TdsResultSet.close(TdsResultSet.java,
    Compiled Code)
    at weblogic.jdbcbase.jts.ResultSet.close(ResultSet.java:260)
    at weblogic.jdbc20.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:53)
    at weblogic.jdbc20.rmi.SerialResultSet.close(SerialResultSet.java:54)
    ... rest of EJB call stack ...Hi. I do want to see the whole stack trace please, and also the EJB code.
    thanks,
    Joe
    >
    Joseph Weinstein <[email protected]> wrote:
    Tom Bechtold wrote:
    Hi Joe,
    I pasted your sample program into my bean and ran it under
    WL510sp11 and JDriver 5.1.0sp11, and it did exhibit the error
    as my code did.
    But it runs fine under WL510sp10 with JDriver 5.1.0sp11.
    Thanks for your great support,
    TomYou're very welcome. Please take the attached jar file, and add it
    at the front of the server's weblogic.classpath, by editting the
    startWebLogic script, and let me know what happens. This jar contains
    the ResultSet class, with a hack to remember where it was closed, and
    print that out if/when it is closed a second time.
    Joe
    Joseph Weinstein <[email protected]> wrote:
    Tom Bechtold wrote:
    A follow-on note: when I back out to Service Pack 10, the problem
    is
    not there,
    so it seems that it is an issue with Service Pack 11.
    - Tom Bechtold
    "Tom Bechtold" <[email protected]> wrote:
    I get a SQL exception "This object was closed() and cannot be used
    anymore."
    when I try to access the first row of the second result set from
    a
    stored
    procedure.
    This occurs when the code is running within an EJB using a transaction-capable
    datasource hooked to a connection pool that uses the MSSQLSERVERv7JDriver
    to talk to SQL Server 7.0.
    I noted that the resultset class used is weblogic.jdbc20.rmi.SerialResultSet.
    The error occurs during the resultSet.next() call even though theresultset
    is not null and getUpdateCount() returns -1.Hi. You say that getUpdateCount() returns -1. I don't see that inthe
    code you sent,
    so you probably just gave us a representative sample of the code you
    run. I did
    runs uch code with the driver alone, and it works as you say. I will
    see if I can
    set up a server to do this via a DataSource, but in case anyone wants
    to help/race with
    me :-), here's simple code to run. If you convert it to a DataSource
    connection,
    and it behaves differently, I'll send you a diagnostic class to seewhat's
    up...
    Joe
    Connection connection = null;
    try
    Properties properties = new Properties();
    properties.put("user", "sa");
    properties.put("password", "");
    Driver d = (Driver)Class.forName("weblogic.jdbc.mssqlserver4.Driver").newInstance();
    connection = d.connect("jdbc:weblogic:mssqlserver4:JOE:1433",
    properties);
    // or get connection from DataSource...
    Statement statement = connection.createStatement();
    try {
    statement.execute("drop procedure bla");
    } catch (Exception e){}
    statement.execute("create procedure bla as select 'Hello
    ' select 'world'");
    CallableStatement c = connection.prepareCall("{ call bla()
    c.execute();
    ResultSet resultset = c.getResultSet();
    while(resultset.next())
    System.out.println("we got " + resultset.getString(1));
    resultset.close();
    c.getMoreResults();
    resultset = c.getResultSet();
    while(resultset.next())
    System.out.println("we got " + resultset.getString(1));
    resultset.close();
    catch(SQLException exception1)
    exception1.printStackTrace();
    finally
    try { connection.close();} catch(Exception ex) {}
    However, the same code works correctly when run in a simple main()procedure
    from the DOS command line, connecting directly to the database
    using
    only
    the classes supplied with the JDriver product. The resultset classused in this
    case
    is weblogic.jdbc.mssqlserver4.TdsResultSet.
    The stored procedure is very simple, it just has two lines: SELECT
    'Hello'
    and SELECT 'World'. The Java code follows.
    // ... code to get the connection ...
    CallableStatement callableStatement = connection.prepareCall("{CALLspTest}");
    callableStatement.execute();
    ResultSet resultSet = callableStatement.getResultSet();
    if ((resultSet != null) && resultSet.next())
    System.out.println("Row from first result set:" + resultSet.getString(1));
    callableStatement.getMoreResults();
    resultSet = callableStatement.getResultSet();
    if ((resultSet != null) && resultSet.next()) // this call to next()throws the
    exception
    System.out.println("Row from second result set:" + resultSet.getString(1));
    resultSet.close();
    callableStatement.close();
    connection.close();
    I am running WL5.10sp11 with mssqlserver4v70sp11 on NT4.0sp6a and
    JDK1.3.0_02
    (HotSpot Client VM).
    Regards,
    Tom B.--
    B.E.A. is now hiring! (12/14/01) If interested send a resume to [email protected]
    DIRECTOR OF PRODUCT PLANS AND STRATEGY San Francisco,
    CA
    E-SALES BUSINESS DEVELOPMENT REPRESENTATIVE Dallas, TX
    SOFTWARE ENGINEER (DBA) Liberty Corner,
    NJ
    SENIOR WEB DEVELOPER San Jose,CA
    SOFTWARE ENGINEER (ALL LEVELS), CARY, NORTHCAROLINA
    San Jose, CA
    SR. PRODUCT MANAGER Bellevue,WA
    SR. WEB DESIGNER San Jose,CA
    Channel Marketing Manager - EMEA Region London, GBR
    DIRECTOR OF MARKETING STRATEGY, APPLICATION SERVERS San Jose,CA
    SENIOR SOFTWARE ENGINEER (PLATFORM) San Jose,CA
    E-COMMERCE INTEGRATION ARCHITECT San Jose,CA
    QUALITY ASSURANCE ENGINEER Redmond, WA
    Services Development Manager (Business Development Manager - Services)
    Paris, FRA; Munich, DEU
    SENIOR SOFTWARE ENGINEER (PLATFORM) Redmond, WA
    E-Marketing Programs Specialist EMEA London, GBR
    BUSINESS DEVELOPMENT DIRECTOR - E COMMERCE INTEGRATION San Jose,CA
    MANAGER, E-SALES Plano, TX--
    B.E.A. is now hiring! (12/14/01) If interested send a resume to [email protected]
    DIRECTOR OF PRODUCT PLANS AND STRATEGY San Francisco,
    CA
    E-SALES BUSINESS DEVELOPMENT REPRESENTATIVE Dallas, TX
    SOFTWARE ENGINEER (DBA) Liberty Corner,
    NJ
    SENIOR WEB DEVELOPER San Jose, CA
    SOFTWARE ENGINEER (ALL LEVELS), CARY, NORTH CAROLINA
    San Jose, CA
    SR. PRODUCT MANAGER Bellevue, WA
    SR. WEB DESIGNER San Jose, CA
    Channel Marketing Manager - EMEA Region London, GBR
    DIRECTOR OF MARKETING STRATEGY, APPLICATION SERVERS San Jose, CA
    SENIOR SOFTWARE ENGINEER (PLATFORM) San Jose, CA
    E-COMMERCE INTEGRATION ARCHITECT San Jose, CA
    QUALITY ASSURANCE ENGINEER Redmond, WA
    Services Development Manager (Business Development Manager - Services)
    Paris, FRA; Munich, DEU
    SENIOR SOFTWARE ENGINEER (PLATFORM) Redmond, WA
    E-Marketing Programs Specialist EMEA London, GBR
    BUSINESS DEVELOPMENT DIRECTOR - E COMMERCE INTEGRATION San Jose, CA
    MANAGER, E-SALES Plano, TX
    B.E.A. is now hiring! (12/14/01) If interested send a resume to [email protected]
    DIRECTOR OF PRODUCT PLANS AND STRATEGY San Francisco, CA
    E-SALES BUSINESS DEVELOPMENT REPRESENTATIVE Dallas, TX
    SOFTWARE ENGINEER (DBA) Liberty Corner, NJ
    SENIOR WEB DEVELOPER San Jose, CA
    SOFTWARE ENGINEER (ALL LEVELS), CARY, NORTH CAROLINA San Jose, CA
    SR. PRODUCT MANAGER Bellevue, WA
    SR. WEB DESIGNER San Jose, CA
    Channel Marketing Manager - EMEA Region London, GBR
    DIRECTOR OF MARKETING STRATEGY, APPLICATION SERVERS San Jose, CA
    SENIOR SOFTWARE ENGINEER (PLATFORM) San Jose, CA
    E-COMMERCE INTEGRATION ARCHITECT San Jose, CA
    QUALITY ASSURANCE ENGINEER Redmond, WA
    Services Development Manager (Business Development Manager - Services) Paris, FRA; Munich, DEU
    SENIOR SOFTWARE ENGINEER (PLATFORM) Redmond, WA
    E-Marketing Programs Specialist EMEA London, GBR
    BUSINESS DEVELOPMENT DIRECTOR - E COMMERCE INTEGRATION San Jose, CA
    MANAGER, E-SALES Plano, TX

Maybe you are looking for

  • How do I move all photos in an album to camera roll?

    I want to move all photos in an album to themCamera Roll.  But after hitting the share icon and selecting Camera Roll, the "All" option is grayed and not selectable.  Am I missing something?

  • Extensions for C4C

    Hi I am currently in the process of trying to evaluate the extension capabilities within C4C, as in the ability to extend the datamodel beyond field level extensions to more complex master detail table ability to build add-ons and have a tighter coup

  • How is the After Effects CS5 (10.0.1) update working for you?

    The After Effects CS5 (10.0.1) update is available. It fixes a lot of crashes, errors, and other problems, and it adds some capabilities for RED (R3D) footage and the Apply Color LUT effect. After you've installed the update, let us know how it's wor

  • Trigger workflow from adobe form

    Hi.. can anyone outline me with the basic steps required to trigger workflow from abobe. Java Wd and ECC 5.0. Thanks!

  • Can't get serial number required to install software?

    I can't get serial number to install software