Multiple rows for 1 detail line of data in an updateable report

I have an end user that wants all data displayed to fit within the frame(No scrolling to the right). The
problem is there is too much data.
In the updateable report I have
Col1- ---Col2--- ---Col3--- ---Col4--- ---Col5--- ---Col6---
Is it possible to have 2 lines - like this:
record 1 ---Col1--- ---Col2--- ---Col3---
---Col4--- ---Col5--- ---Col6---
record 2 ---Col1--- ---Col2--- ---Col3---
---Col4--- ---Col5--- ---Col6---
Any assistance will be appreciated.
Shelly

Hi Shelly,
If you haven't already, you might want to try playing with different Report Templates (e.g. 100% width) and also CSS field formatting like nowrap and fixed widths to get what you want.
Cheers,
Mike

Similar Messages

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

I don't want a new row for each line of text

I have exported a pdf document which is a table full of text in columns (by month). The conversion seems to react randomly so that in some places several lines of text in a column are converted to just one cell (great, just what I want) and then in others, a block of text gets split into a row for each line of text --- very annoying ...
What would make this happen? Is there a workaround so that you can tell the conversion how to react to blocks of text?
hope someone can help

For optimal export the PDF needs to be a well-formed tagged PDF.
The basic PDF page content has no format, styling, rows, columns, etc.
Just objects painted to the PDF page at a specified location.
You can return to the authoring file, clean that up to support accessible PDF output, then post process the PDF with Acrobat XI Pro to finalize making the PDF PDF/UA compliant. Export of that would be better.
You can manually tag the PDF such that it is PDF/UA compliant than export from that . This would provide you better export.
You can clean up the export you already have.
Be well...

How to make RECORD for saving multiple rows for each employee..

Hi,
How can I create a record for saving multiple rows for each employee... (parent child relationship)
I have created all required fields, then created a record, and then created a page. in that page i dragged-n-dropped a scroll area on that page and dropped all required fields from record into that scroll-area.
whats is happening that its saving ONE (the first) record fine, but for the second record its not storing EMPLID for that row..
Will I have to make some change at RECORD level ?
OR Will i have to make some configuration in parent component ?

Hi, the problem is solved. The record will be created in same way. just create more then one keys (allowing to make composite key in DB table)

Search files for specific lines of data

Hi all, I have a problem that I hope someone can help me with.
I need to find a way to search for specific lines of data on a file.
Here's the setup.... say for example I have 10 files, each filled with log files containing data like the date they were created and also certain information they were monitoring.
From a Java applet, a user types in information that they want (for example, only lines that were created between 2002/04/04 and 2002/05/05 and only ones tagged with "Caution"). I need a way to grab all of those line from each of the files, without having to open each file, read each line and check for each search request. Instead, I want to simply grab all of the data at once, or at the very least, grab all of the data from the first file, then grab all of the data from the second file etc, without having to search each individual line. (the reason I'm hoping for a command like this is because there will eventually be thousands of files that need to be searched, and opening each one, and then search each line one by one would take too long.
Sort of like a grep command in Linux. Does Java have a similar command?
Any information or samples would be greatly appreciated!

I don't know how much control you have over the files that you have to search.
Searching XML files would be a lot easier because XPATH queries will work exactly like SQL... The only problem being if your files are not XML at all.
If you have control over the format of these files you are trying to search, then try XML... else you might have to write a batch utility that runs every N seconds and converts data in these files to XML format files conforming to a specific format and then your applet could query the XML files.
There will be a small concurrency issue there, though; As there will be at least some time consumed by the thread.

PO Interface - Multiple shipments for a line

Hi,
Please could you anyone help me as to how to import PO lines with mutiple shipments?
PO_header_interface, po_lines_interface, po_distributions_interface are the tables am using for the PO Interface.
Since some of the PO lines has multiple shipments for a line, the Open Interface is failing.
I am in 11.5.10.2, any helps please.
Thanks
Genoo
Edited by: Geno on Aug 27, 2012 11:13 AM

Hi Genoo,
PO_LINES_INTERFACE table has got LINE_NUM and SHIPMENT_NUM columns. If you have multiple shipments for a line (e.g. Line 1 got shipment 1,2 and 3), you need to insert records as LINE_NUM=1, SHIPMENT_NUM=1, LINE_NUM=1, SHIPMENT_NUM=2 and so on.
Thanks,
PS.

Writing multiple rows in one line, mysql statement. No strings are saved

Hi, I dont know how to make multiple rows inputs into the table in one sentence. Ive got an error: "java.sql.SQLException: Statement parameter 2 not set" provided by code below. It works fine for one Date row (saves in the db corectly) however when I use for two different date types two single statements it will write databes two times putting 2x Null in the every other row. I dont want that, I need it to be written in one connection and statement.
try{
     String userName = "user";
          String password = "pass";
          String url = "jdbc:mysql://dbadress/dbname";
          Class.forName ("com.mysql.jdbc.Driver").newInstance();
          Connection con = DriverManager.getConnection (url, userName, password);
          Statement st1=con.createStatement();
       Date BirthDate = wdContext.currentPeopleElement().getBirthDate(); //People - context node, BirthDate - context attribute
       Date FillDate = wdContext.currentContextElement().getFillDate();
       String sql1 = "INSERT INTO table1 (BirthDate1,FillDate1) VALUES (?,?)"; //BirthDate1,FillDate1 - rows in the "table1" table
       PreparedStatement stmt1 = con.prepareStatement(sql1);
       stmt1.setDate(1, BirthDate);
       stmt1.setDate(1, FillDate);
       stmt1.executeUpdate();
       stmt1.close();
     catch(Exception e) {
     wdComponentAPI.getMessageManager() .reportWarning( e.toString() ); }
I would like to know how to fix it.
Other issue is that code below:
try{
     String userName = "user";
          String password = "pass";
          String url = "jdbc:mysql://dbadress/dbname";
          Class.forName ("com.mysql.jdbc.Driver").newInstance();
          Connection con = DriverManager.getConnection (url, userName, password);
          Statement st1=con.createStatement();
       Date BirthDate = wdContext.currentPeopleElement().getBirthDate(); //People - context node, BirthDate - context attribute
       String sql1 = "INSERT INTO table1 (BirthDate1) VALUES (?)"; //BirthDate1 row in the "table1" table
       PreparedStatement stmt1 = con.prepareStatement(sql1);
       stmt1.setDate(1, BirthDate);
          stmt1.executeUpdate();
       stmt1.close();
     catch(Exception e) {
     wdComponentAPI.getMessageManager() .reportWarning( e.toString() ); }
works perfectly fine. It does write date in the database as shown on the monitor hoever it doesnt work if we change Date type with String. Of course context nodes are String type as well. Code below will write "Null" value in the db. Dont know why. Of course I write some string down in the input field and save after, just like do it with Date type which works fine. Please advice.
try{
     String userName = "user";
          String password = "pass";
          String url = "jdbc:mysql://dbadress/dbname";
          Class.forName ("com.mysql.jdbc.Driver").newInstance();
          Connection con = DriverManager.getConnection (url, userName, password);
        Statement st2=con.createStatement();
     String signature = wdContext.currentContextElement().getsignature(); //signature - context
     String sql2 = "INSERT INTO table1 (signature1) VALUES (?)"; //signature1 - name of row in the table1
     PreparedStatement stmt2 = con.prepareStatement(sql2);
     stmt2.setString(1, signature);
     stmt2.executeUpdate();
     stmt2.close();
     catch(Exception e) {
     wdComponentAPI.getMessageManager() .reportWarning( e.toString() ); }
Regards, Blamer.

Hi,
Fix for your first issue
I dont know how to make multiple rows inputs into the table in one sentence. Ive got an error: "java.sql.SQLException: Statement parameter 2 not set" provided by code below. It works fine for one Date row (saves in the db corectly) however when I use for two different date types two single statements it will write databes two times putting 2x Null in the every other row. I dont want that, I need it to be written in one connection and statement.
try{
     String userName = "user";
          String password = "pass";
          String url = "jdbc:mysql://dbadress/dbname";
          Class.forName ("com.mysql.jdbc.Driver").newInstance();
          Connection con = DriverManager.getConnection (url, userName, password);
          Statement st1=con.createStatement();
       Date BirthDate = wdContext.currentPeopleElement().getBirthDate(); //People - context node, BirthDate - context attribute
       Date FillDate = wdContext.currentContextElement().getFillDate();
       String sql1 = "INSERT INTO table1 (BirthDate1,FillDate1) VALUES (?,?)"; //BirthDate1,FillDate1 - rows in the "table1" table
       PreparedStatement stmt1 = con.prepareStatement(sql1);
       stmt1.setDate(1, BirthDate);
       stmt1.setDate(1, FillDate);
       stmt1.executeUpdate();
       stmt1.close();
     catch(Exception e) {
     wdComponentAPI.getMessageManager() .reportWarning( e.toString() ); }
I would like to know how to fix it.
Change the line stmt1.setDate(1, FillDate); to stmt1.setDate(2, FillDate);
As a workarond for your following issue
works perfectly fine. It does write date in the database as shown on the monitor hoever it doesnt work if we change Date type with String. Of course context nodes are String type as well. Code below will write "Null" value in the db. Dont know why. Of course I write some string down in the input field and save after, just like do it with Date type which works fine. Please advice.
try{
     String userName = "user";
          String password = "pass";
          String url = "jdbc:mysql://dbadress/dbname";
          Class.forName ("com.mysql.jdbc.Driver").newInstance();
          Connection con = DriverManager.getConnection (url, userName, password);
        Statement st2=con.createStatement();
     String signature = wdContext.currentContextElement().getsignature(); //signature - context
     String sql2 = "INSERT INTO table1 (signature1) VALUES (?)"; //signature1 - name of row in the table1
     PreparedStatement stmt2 = con.prepareStatement(sql2);
     stmt2.setString(1, signature);
     stmt2.executeUpdate();
     stmt2.close();
     catch(Exception e) {
     wdComponentAPI.getMessageManager() .reportWarning( e.toString() ); }
Try as follows
PreparedStatement stmt2 = con.prepareStatement(sql2);
     stmt2.setString(1, (signature == null ? "Value missing" : signature));
     stmt2.executeUpdate();
     stmt2.close();
If the context attribute is null it will enter the text "Value Missing",
Regards
Ayyapparaj

Update multiple row for different values

hi,
Please provide me the sql query to update multiple row in a table with different values.
i need to change the old date to new date
we have only 3 column id,name,old date.now i need to update the old date to new date
ID name old date new date
1 A 2012-12-20 12/7/2012
2 B 2012-12-20 12/9/2012
3 c 2012-12-20 12/5/2012
thank you.

Here are two ways to do this. Thanks to ranit for the table creation script, which I adapted.create table test_x
as
select 1 id, 'A' name, to_date('2012-12-20','yyyy-mm-dd') old_date
from dual UNION ALL
select 2 id, 'B' name, to_date('2012-12-20','yyyy-mm-dd') old_date
from dual UNION ALL
SELECT 3 ID, 'C' NAME, TO_DATE('2012-12-20','yyyy-mm-dd') OLD_DATE
from dual;First method using MERGE:MERGE INTO TEST_X O
USING (
select 1 id, to_date('12/7/2012','mm/dd/yyyy') new_date
from dual UNION ALL
select 2 id, to_date('12/9/2012','mm/dd/yyyy') new_date
from dual UNION ALL
SELECT 3 ID, TO_DATE('12/5/2012','mm/dd/yyyy') NEW_DATE
FROM DUAL
) n
ON (O.ID = N.ID)
WHEN MATCHED THEN UPDATE SET OLD_DATE = n.NEW_DATE;Second method using UPDATE:UPDATE TEST_X SET OLD_DATE =
CASE WHEN ID = 1 THEN TO_DATE('12/7/2012','mm/dd/yyyy')
WHEN ID = 2 THEN TO_DATE('12/9/2012','mm/dd/yyyy')
WHEN ID = 3 THEN TO_DATE('12/5/2012','mm/dd/yyyy')
END
where id between 1 and 3;
You probably don't want to use these methods.*
You say the "user" will enter these values. Will he always enter exactly 3 values?
The "user" will enter values into a screen I suppose. What language is the user interface programmed in?

Multiple Rows for Same Value in Matrix Report

Hello
I am trying to create a matrix report that shows different page for each Category. Report looks like follows:
Page1( for Category '1')
Agent |
Calls |
Sales
TestAgent1 18
3
TestAgent1 5
1
Page2( for Category '2')
Agent |
Calls |
Sales
TestAgent1 26
5
TestAgent1 13
2
The issue is as you can see in above table, that i am getting repeated rows for same agents. I have tried making a parent group on Agent but it would still keep showing multiple rows. Ideally, it should show each agent only once in each page.
Any help would be appreciated.
PS: I am new to SSRS and this is my first time on microsoft blog, so i apologize if i wasn't able to follow the protocols/culture here.
Thanks

Hi M Adnan,
According to your description, you want to show a total Calls and total Sales for same agent so that it has only one row for each agent in your category group. Right?
In this scenario, if you only have a row group for category, it will show all “detail rows” in this groups even the agent of these rows are same one. So we can add a row group, set those detail rows group by agent and use Sum function to get the total Calls
and Sales. It looks like below:
If we want to display each Page in horizontal, we just need one Category column group for grouping rows and use sum function to get total Calls and Sales for each agent. It looks like below:
Reference:
Understanding Groups (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Why no tab add-ins that enable multiple rows for Firefox 4???

I geneally have lots of tabs open at any given time. I traditionally use TabKit, TabMix, and others that let me use multiple rows of tabs (among other options). I have not been able to find ANY add-ons that support multiple rows. There is sadness across the land.

The mentioned "Multirow Bookmarks Toolbar Plus" add-on specifically addresses bookmarks, while the question is regarding the tabs.

Date Span - Validation for start and end date parameters in Crystal reports

Hi,
I am new here and am unsure if this is the right place to post this issue. If so, I apologize for that.
I am working on Crystal Reports 12 and don't know if it is possible; to validate the parameters - Start Date and End Date are within a specific span of time. For Eg. Start Date and End Date should be within 6 months or Start Date should be a future date.
Can we prompt that parameters entered are invalid and have users re-enter it?
I will really appreciate any help into this issue.
Thanks Much,
RP

Hi,
Well, it is not possible to validate the date/datetime values in the prompt window, however there are other alternatives.
One of them is to create an Alert with the condition:
datediff("m",Minimum({?DateParameter}),Maximum({?DateParameter})) > 6
//This is to check if the start date and the end date are within 6 months
Another way of doing this is by displaying a message on the Report Header and suppressing all other sections if the date range values do not meet the condition.
Hope this helps!
-Abhilash

Date formatting on updateable report

I have an updateable report with a date column. I would like the user to be able to use mm/dd/rrrr format.
Is this possible?
Thanks

when you use our tabular form wizard to generate a tabular form, you're somewhat limited in what you can do to the data that's being selected out of your table. it's currently set up that way because we do some optimistic locking stuff behind the scenes to maintain your data integrity for you. there might be other ways to deal with your specific request, but this approach seems easiest to me assuming that changing your db's default date format isn't an option:
put html db pl/sql processes on both your page rendering and page submission sections that set your nls_date_format for each of those db sessions. so both of your new html db processes would be of type "PL/SQL Anonymous Block". one would fire with a process point of "On Load - Before Header" and the other would fire "On Submit - Before Computations and Validations". both processes would look like...
begin
execute immediate 'alter session set nls_date_format = ''mm/dd/rrrr''';
end;
...and after those two changes, your tablular form should handle dates in the mm/dd/rrrr format you're looking for.
hope this helps,
raj

Fetch Multiple row in repor to insert data with multiple rows .

Hi Friends
i want to Insert emp attendance .
There are 10 emp in company .they enter there arival time in attendance register .
i have two item
1--p1_att_date
2--p1_status
ATTEN_STATUS are PRESENT by default in selectlist .
i want, when i enter date in p1_att_date item and Press submit then generate a report with 10 employee and insert in_time in report and when press enter then data with 10 emp should insert in to table ABC .
i don't want to use tabularform for this .actully i don't want to use ADD_ROW option to ADD attendance for second emp.so please give me some solution.
Emp_ID     ATTEN_DATE     ATTEN_STATUS      IN_TIME     OUT_TIME
101     22-JAN-2009     PRESENT
102     22-JAN-2009     PRESENT
103     22-JAN-2009     PRESENT
104     22-JAN-2009     PRESENT
105     22-JAN-2009     PRESENT
106     22-JAN-2009     PRESENT
107     22-JAN-2009     PRESENT
108     22-JAN-2009     PRESENT
109     22-JAN-2009     PRESENT
110     22-JAN-2009     PRESENT
My table is :-
table Name --ABC
emp_id number;
atten_date date;
atten_status varchar2(12);
in_time timestemp;
out_time timestemp;
How can i do this.
Thanks
Manoj

Hi Manoj,
You can create multiple records easily using a single, simple, form. However, you would surely have to enter in the times individually using a tabular form (otherwise, you would have to use the same form 10 times). You do not have to keep the Add Row option on the page - this functionality can be removed.
Andy

Need help with a SQL qurey that returns multiple rows for one record?

I have the following query where I use a CASE WHEN clause to determine the date of a shift that begins with "FRLO" on day1 - day14 of the pay period. It works great if a schedule record contains one day that begins "FRLO", but if more than one day is "FRLO" then it only returns the first day it finds and not the others. Is there some way to get the query to return a ron for every day 1 - 14 that begins "FRLO"? System if Oracle 11G
Order of the results is not important as this is part of a larger query that orders the results.
Thanks in advance for any help,
George
SELECT s.empid,
CASE
WHEN UPPER (SUBSTR (s.Day1, 0, 4)) = 'FRLO'
THEN
pp.startpp
WHEN UPPER (SUBSTR (s.Day2, 0, 4)) = 'FRLO'
THEN
pp.startpp + 1
WHEN UPPER (SUBSTR (s.Day3, 0, 4)) = 'FRLO'
THEN
pp.startpp + 2
WHEN UPPER (SUBSTR (s.Day4, 0, 4)) = 'FRLO'
THEN
pp.startpp + 3
WHEN UPPER (SUBSTR (s.Day5, 0, 4)) = 'FRLO'
THEN
pp.startpp + 4
WHEN UPPER (SUBSTR (s.Day6, 0, 4)) = 'FRLO'
THEN
pp.startpp + 5
WHEN UPPER (SUBSTR (s.Day7, 0, 4)) = 'FRLO'
THEN
pp.startpp + 6
WHEN UPPER (SUBSTR (s.Day8, 0, 4)) = 'FRLO'
THEN
pp.startpp + 7
WHEN UPPER (SUBSTR (s.Day9, 0, 4)) = 'FRLO'
THEN
pp.startpp + 8
WHEN UPPER (SUBSTR (s.Day10, 0, 4)) = 'FRLO'
THEN
pp.startpp + 9
WHEN UPPER (SUBSTR (s.Day11, 0, 4)) = 'FRLO'
THEN
pp.startpp + 10
WHEN UPPER (SUBSTR (s.Day12, 0, 4)) = 'FRLO'
THEN
pp.startpp + 11
WHEN UPPER (SUBSTR (s.Day13, 0, 4)) = 'FRLO'
THEN
pp.startpp + 12
WHEN UPPER (SUBSTR (s.Day14, 0, 4)) = 'FRLO'
THEN
pp.startpp + 13
END
startdate,
NULL starttime,
NULL endtime,
8 hours,
0 minutes
FROM schedules s
JOIN
payperiods pp
ON pp.periodid = s.periodid
WHERE UPPER (SUBSTR (s.Day1, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day2, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day3, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day4, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day5, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day6, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day7, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day8, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day9, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day10, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day11, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day12, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day13, 0, 4)) = 'FRLO'
OR UPPER (SUBSTR (s.Day14, 0, 4)) = 'FRLO';
CURRENT OUTPUT
EMPID STARTDATE STARTTIME ENDTIME HOURS MINUTES
753738, 3/25/2013 , , ,8 ,0
753740, 3/25/2013 , , ,8 ,0
753748, 3/25/2013 , , ,8 ,0
DESIRED OUTPUT
EMPID STARTDATE STARTTIME ENDTIME HOURS MINUTES
753738, 3/25/2013 , , ,8 ,0
753740, 3/25/2013 , , ,8 ,0
753748, 3/25/2013 , , ,8 ,0
753738, 3/26/2013 , , ,8 ,0
753740, 3/26/2013 , , ,8 ,0
753740, 3/28/2013 , , ,8 ,0
753748, 1/1/2013 , , ,8 ,0
753738, 4/3/2013 , , ,8 ,0
753748, 4/3/2013 , , ,8 ,0
CREATE TABLE SCHEDULES
SCHEDULEID NUMBER(12) NOT NULL,
EMPID NUMBER(12) NOT NULL,
PERIODID VARCHAR2(6 BYTE) NOT NULL,
AREAID NUMBER(12) NOT NULL,
DAY1 VARCHAR2(50 BYTE),
DAY2 VARCHAR2(50 BYTE),
DAY3 VARCHAR2(50 BYTE),
DAY4 VARCHAR2(50 BYTE),
DAY5 VARCHAR2(50 BYTE),
DAY6 VARCHAR2(50 BYTE),
DAY7 VARCHAR2(50 BYTE),
DAY8 VARCHAR2(50 BYTE),
DAY9 VARCHAR2(50 BYTE),
DAY10 VARCHAR2(50 BYTE),
DAY11 VARCHAR2(50 BYTE),
DAY12 VARCHAR2(50 BYTE),
DAY13 VARCHAR2(50 BYTE),
DAY14 VARCHAR2(50 BYTE),
NOPTIND1 INTEGER DEFAULT 0,
NOPTIND2 INTEGER DEFAULT 0,
NOPTIND3 INTEGER DEFAULT 0,
NOPTIND4 INTEGER DEFAULT 0,
NOPTIND5 INTEGER DEFAULT 0,
NOPTIND6 INTEGER DEFAULT 0,
NOPTIND7 INTEGER DEFAULT 0,
NOPTIND8 INTEGER DEFAULT 0,
NOPTIND9 INTEGER DEFAULT 0,
NOPTIND10 INTEGER DEFAULT 0,
NOPTIND11 INTEGER DEFAULT 0,
NOPTIND12 INTEGER DEFAULT 0,
NOPTIND13 INTEGER DEFAULT 0,
NOPTIND14 INTEGER DEFAULT 0
CREATE TABLE PAYPERIODS
PERIODID VARCHAR2(6 BYTE) NOT NULL,
STARTPP DATE,
ENDPP DATE
Insert into SCHEDULES
(SCHEDULEID, EMPID, PERIODID, AREAID, DAY1,
DAY2, DAY3, DAY4, DAY5, DAY6,
DAY7, DAY8, DAY9, DAY10, DAY11,
DAY12, DAY13, DAY14, NOPTIND1, NOPTIND2,
NOPTIND3, NOPTIND4, NOPTIND5, NOPTIND6, NOPTIND7,
NOPTIND8, NOPTIND9, NOPTIND10, NOPTIND11, NOPTIND12,
NOPTIND13, NOPTIND14)
Values
(3693744, 753738, '082013', 2167, 'X',
'FRLO<1530>', 'FRLO<1530>', '1530', '1530', '1530',
'X', 'X', '1530', '1530', 'FRLO',
'1530', '1530', 'X', 0, 0,
0, 0, 0, 0, 0,
0, 0, 0, 0, 0,
0, 0);
Insert into SCHEDULES
(SCHEDULEID, EMPID, PERIODID, AREAID, DAY1,
DAY2, DAY3, DAY4, DAY5, DAY6,
DAY7, DAY8, DAY9, DAY10, DAY11,
DAY12, DAY13, DAY14, NOPTIND1, NOPTIND2,
NOPTIND3, NOPTIND4, NOPTIND5, NOPTIND6, NOPTIND7,
NOPTIND8, NOPTIND9, NOPTIND10, NOPTIND11, NOPTIND12,
NOPTIND13, NOPTIND14)
Values
(3693745, 753740, '082013', 2167, 'X',
'FRLO<1530>', 'FRLO<1530>', '1530', 'FRLO', '1530',
'X', 'X', '1530', '1530', '1530',
'1530', '1530', 'X', 0, 0,
0, 0, 0, 0, 0,
0, 0, 0, 0, 0,
0, 0);
Insert into SCHEDULES
(SCHEDULEID, EMPID, PERIODID, AREAID, DAY1,
DAY2, DAY3, DAY4, DAY5, DAY6,
DAY7, DAY8, DAY9, DAY10, DAY11,
DAY12, DAY13, DAY14, NOPTIND1, NOPTIND2,
NOPTIND3, NOPTIND4, NOPTIND5, NOPTIND6, NOPTIND7,
NOPTIND8, NOPTIND9, NOPTIND10, NOPTIND11, NOPTIND12,
NOPTIND13, NOPTIND14)
Values
(3693746, 753748, '082013', 2167, 'X',
'FRLO<1530>', '1530', '1530', '1530', '1530',
'X', 'X', 'FRLO<1530>', '1530', 'FRLO',
'1530', '1530', 'X', 0, 0,
0, 0, 0, 0, 0,
0, 0, 0, 0, 0,
0, 0);
COMMIT;
Insert into PAYPERIODS
(PERIODID, STARTPP)
Values
('082013', TO_DATE('03/24/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;

Do you have the opportunity to change the data model to have one day per row ? It would make this easier to get this result without the need for a 14-way CASE or UNION.
If not...
The case statement will return as soon as it matches one of the conditions. Since you want a match when any column in the row starts with FRLO you can use a UNION ALL treating each column as a separate result. There may be more efficient ways to do this, but here is one way:
Select S.Empid,       Pp.Startpp Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day1, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+1 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day2, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+2 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day3, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+3 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day4, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+4 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day5, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+5 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day6, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+6 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day7, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+7 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day8, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+8 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day9, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+9 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day10, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+10 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day11, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+11 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day12, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+12 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day13, 0, 4)) = 'FRLO'
Union All
Select S.Empid,       Pp.Startpp+13 Startdate,       Null Starttime,       Null Endtime,       8 Hours,       0 Minutes
From Schedules S       Join Payperiods Pp On Pp.Periodid = S.Periodid
Where Upper (Substr (S.Day14, 0, 4)) = 'FRLO'
;

Select multiple playlists for burning to DVD Data disc?

Hi, i need to burn about 5 playlists to a DVD Data Disc for temp backup, iTunes only is allowing me to select one playlist at a time. Of corse one play list is about 300 meg and this is totally wasteful of a DVD.
Anyone know how to burn multiple playlists to a single disc? maybe some other app can read iTunes's playlists and provide burning?
I want each playlist to create a self titled folder on disc with the tunes in each.
Thanks

Hi man, good idea.
Unfortunately, in iTunes, the "Burn Data Disc" button disappears when the folder is selected, in addition to the burn menu item. The burn button reappears when a single playlist inside the folder is selected, unfortunately again, more than one playlist cannot be selected.
It does appear iTunes can burn only 1 single playlist to a disc or the entire library and nothing in between which is very problematic for me right now.
Sadly the "Back Up to Disc" option in the File menu provides the following options :
"Back Up entire iTunes library and playlist"
"Back Up only iTunes Store purchases"
This appears also to be useless.
Toast 8 won't import exported iTunes XML playlists either and just burn the tracks in each playlist to a folder on the disk.
Suppose we need "iTunes Pro" to do something simple as I require :-((

Multiple rows for 1 detail line of data in an updateable report

Similar Messages

Maybe you are looking for