Multiple selection box

is there a way to use a multiple selection box and calculate values in a text box.
I did set up a rule to set values but I won't work for my need.
so multiple selection box has pc1, pc2, pc 3. The user can select all of these or just one but no matter what selection is made the price is calculated into another box on the InfoPath form, I assume either a text box or a calculated field box?
any help or guidance would be greatly appreciated!!
Ray

Hi Little_Ghost,
for using a form, seems quite a challenge.
when you select the selection box, or check boxes in the form, you may need to grab the all the selection, and refresh the page with the pre-selected information, so it will be loaded when the page is refreshed.
if you are using infopath template, it may be difficult, since we need 2 infopath form templates associate with list A and B individually, not sure how to interact this cross 2 infopath form template.
my infopath colleague suggest you to try to use one infopath form template with 2 data connections.
i was thinking,
if you could populate the items, for example by using getlistitem()
http://spservices.codeplex.com/wikipage?title=GetListItems
then you may put the result in an array, and ready to compare.
since you would like to use a form, then it may not updated directly, i am not quite sure for this, because as i know you may need to use a button to send out and update/refresh the fields.
http://www.quirksmode.org/js/forms.html
http://www.javaworld.com/article/2077176/scripting-jvm-languages/using-javascript-and-forms.html
or you may have to try to use the data view webpart:
http://www.dotnetcurry.com/showarticle.aspx?ID=581
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

How can I see the numbers of lines selected in a Multiple Selection Box?

Hi everybody,
what I want to do is to get in an array of numbers all the lines selected.
For instance, if I select the rows 1,4 and 7 from a Multiple Selection Box
of 10 rows in total, how can I see that array when the rows 1,4 and 7 are
selected?
Because I want to connect this numbers to Case Structure and if the only
rows selected are 1,4 and 7, the Case Structure will only realize this cases,
and the rest will be ignored.
I'm sure there is some way to get what I want.
Thank you for your helpful.

THANK YOU VERY MUCH. IT WORKS PERFECTLY!!!
"Dennis Knutson" wrote:
>>If you just wire the list box to an array indicator, you will see that
the>output is an array of the selected items. Auto index the array through
a>for loop that has your case statement inside.>>Dennis Knutson>>"Carlos
Jorge" wrote>>Hi everybody,>>what I want to do is to
get in an array of numbers all the>lines selected.>For instance, if I select
the rows 1,4 and 7 from a Multiple>Selection Box>of 10 rows in total, how
can I see that array when the rows>1,4 and 7 are>selected?>>Because I want
to connect this numbers to Case Structure>and if the only>rows selected are
1,4 and 7, the Case Structure will only>realize this cases,>and
the rest
will be ignored.>>I'm sure there is some>way to get what I want.>>Thank you
for your helpful.>>

Multiple Select boxes in one form

Does anyone know if it is possible to have multiple select
boxes inside one form? I have six different select boxes that are
generated by six separate queries. The action page for all six
select boxes is the same so I just want one submit button so users
don't get confuse. I don't want to cluster up the page with submit
buttons but I may resort to that option.
My problem is the select boxes generate a number and when
that number is submitted I want to pass two other variables with it
to the action page. I tried putting a "Form" tag around the 6
select boxes. Inside each select box I tried to add an "Input
type="hidden"" and give thte name and values that I needed. That
worked for the first select box but when I tried the second select
box it used the hidden values for the first select box.
If anyone can help, I would greatly appreciate it. Or if you
have any other suggestions I am open to any.
Thanks

Paross1,
I wasn't thinking about that and you gave me a great idea.
Here is how I changed my select boxes.
<cfform
action="Resolution_History.cfm?year=#year#&sessiontype=#sessiontype#&btype=res"
name="form">
<select name="SRINPUT">
<option value="">SR
<CFOUTPUT Query="findSR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HRINPUT">
<option value="">HR
<CFOUTPUT Query="findHR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SCRINPUT">
<option value="">SCR
<CFOUTPUT Query="findSCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<br>
<select name="HCRINPUT">
<option value="">HCR
<CFOUTPUT Query="findHCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SJRINPUT">
<option value="">SJR
<CFOUTPUT Query="findSJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HJRINPUT">
<option value="">HJR
<CFOUTPUT Query="findHJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<INPUT TYPE="Submit" VALUE="Submit" alt="submit
button">
</cfform>
On the action page I need the below IF statement to work so
it will set the variables. It isn't working at this time. Its not
bringing the values of billnumber, houseorig or the billtype.
Do you have any thoughts? I know it is close. I need to set
all of the inputs to input4 to generate my queries.
<cfif form.srinput gt 0>
<cfset houseorig eq "s">
<cfset billtype eq "r">
<cfset srinput eq input4>
<cfelseif form.hrinput gt 0>
<cfset houseorig eq "h">
<cfset billtype eq "r">
<cfset hrinput eq input4>
<cfelseif form.scrinput gt 0>
<cfset houseorig eq "sc">
<cfset billtype eq "r">
<cfset scrinput eq input4>
<cfelseif form.hcrinput gt 0>
<cfset houseorig eq "hc">
<cfset billtype eq "r">
<cfset hcrinput eq input4>
<cfelseif form.sjrinput gt 0>
<cfset houseorig eq "sj">
<cfset billtype eq "r">
<cfset sjrinput eq input4>
<cfelse>
<cfset houseorig eq "hj">
<cfset billtype eq "r">
<cfset hjrinput eq input4>
</cfif>

Display in multiple selection box

Hi
I have two multiple selection boxes.When i select few items in the first box and click a button it should appear on the second box.
how can it be achieved? any help would be appreciated.

You could do this or using Javascript or updating the page by passing a parameter.
It depends on what u have to implement.
Ing. Steva

Multiple selection box + Substracting cascading dropdown list

I have a multi-select boxe and a drop down but instead of ADDING the choices made in the multi select box to the list of selectable items in the drop down list, I want to SUBSTRACT them.
I'll try to clearify it: if in the multi-slection box you have:
Option A and option B and
in the drop down list, you (depending on you selection) have 2 4 6 8 (options for A) or 4 8 10 12 (options for B).
When selecting BOTH A and B, the drop down liast should ONLY display the values that overlap/exist in both A and B (e.g 4 8).
This would have to work for X number of options in both the multi select box and the drop down list.
Doess anybody know how to make that work?
Thanks in advanced and kind regards!

Hi Little_Ghost,
for using a form, seems quite a challenge.
when you select the selection box, or check boxes in the form, you may need to grab the all the selection, and refresh the page with the pre-selected information, so it will be loaded when the page is refreshed.
if you are using infopath template, it may be difficult, since we need 2 infopath form templates associate with list A and B individually, not sure how to interact this cross 2 infopath form template.
my infopath colleague suggest you to try to use one infopath form template with 2 data connections.
i was thinking,
if you could populate the items, for example by using getlistitem()
http://spservices.codeplex.com/wikipage?title=GetListItems
then you may put the result in an array, and ready to compare.
since you would like to use a form, then it may not updated directly, i am not quite sure for this, because as i know you may need to use a button to send out and update/refresh the fields.
http://www.quirksmode.org/js/forms.html
http://www.javaworld.com/article/2077176/scripting-jvm-languages/using-javascript-and-forms.html
or you may have to try to use the data view webpart:
http://www.dotnetcurry.com/showarticle.aspx?ID=581
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Multiple Selection Boxes for Data

Hello all,
I need to create a dashboard that will allow me to drill down by two parameters. For example:
I need to see the country in this example USA and then a second critera would be the states.
So I would want to be able to select USA in one combo box potenially and see the totals and then select a specific state in a second combo box and see those totals.
I would then want to do south america and those countries. So South America and then Brazil, mexico, ect.
Any feedback or ideas.

HI Jeffrey....
U can try with the filter option for drilling down to your actual content. For clear picture go through the following link.
http://visualbis.com/blogs/multi-select-combo-box-for-sap-businessobjects-dashboards-xcelsius/
Regrads,
P.Gowri

Multiple selection in combo box

Hi,
How to save the selected values (with multiple selection) in to the database from combo box. I made it as multiple selection box by selecting value true for attribute Multiple, but only one value is saving in to database. How to handle it.
Regds,
Sudhakar

I 'll explain the requirement:
I have three tables, for example employee, department and empDept table which contains empId and DeptId. In my jsp, while inserting employee i need to give all existing departments in combo with multiselect option. When user press submit, i need to insert one record in employee, and records in empDept with new empId and all selected Department ids. empId is dbsequence generation.
(I did this through LOV mode of list binding editor. Even i select multiple values in JSP, its inserting only first selected record in to empDept table.)

Multiple Selection List Box-- Data Reporting Problem...

I want to build a form which reports all of the multiple selections made by users from a list box. When I test the form, only the first selection is reported in the dataset. How do I configure the form so that when data is compiled, each of the selections from the list box is reported in sequence?

Here is the solution for the requirement.
Add another 2 columns in the resource list: test1 (set default value to 1), test2 (no default value).
Set test1 to 1 for all existing items in the resource list.
Set test2 to 2 for the 10 special items.
Custom form from InfoPath Designer, modify the data connection and also include the test1 and test2.
Go to drop down control properties and make sure its value is 1 and 2.
Go add the filter to multiple selection box control like this.
Note: field1 is the field used by my drop down control in Main data connection.
7. Done. Now when we select test1 in drop down, we can see all list items in multiple selection box. And when we select test2 in drop down, we can see the 10 list items that with test2 column filled with 2.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Multi-Select Box Not Displaying Values Passed From Grid?

Coldfusion 8
I inherited an application and am trying to maintain and improve it... hit a snag today.
I have a multi-select box that is not displaying what I expect. The values come from a ColdFusion grid which is based off a database query.
Here is the code for the select - does not work - nothing is selected:
<cfselect name="USER_IDS" multiple="true" queryposition="below" selected="USER_IDS" query="ActiveUsersPlus" disabled="#disabled#" value="G_USER_WORK_UNIT_SK" display="G_USER_ID" >
</cfselect>
Now if I change the multiselect to a single select like below - it takes the first item in the field list (from the grid) and selects it in the drop down.
<cfselect name="USER_IDS" multiple="false" queryposition="below" selected="USER_IDS" query="ActiveUsersPlus" disabled="#disabled#" value="G_USER_WORK_UNIT_SK" display="G_USER_ID" >
</cfselect>
Or if I assign a variable like this and use the multi-select code it seems to work as well.
testlist = "22,26";
<cfselect name="USER_IDS" multiple="true" queryposition="below" selected="#testlist#" query="ActiveUsersPlus" disabled="#disabled#" value="G_USER_WORK_UNIT_SK" display="G_USER_ID" >
</cfselect>
I have displayed the value of "User_IDs" in the grid and in the data entry part of the screen to see values of: 22,26
to make sure that wasn't my issue.
Do grids and multiselects require something additional? Any advice on how to resolve?

Problem was related to some javascript for the select box. There was a function for a single select box but not a multiple select box - this fixed it:
if(theForm.elements[i].type == "select-multiple"){
                    var selectBox = theForm.elements[i];
                    var sbname = selectBox.name;
                    cpvalue = String(eval('record.data.' + sbname));
                    var NotifyArray = cpvalue.split(',');
                    for (var j=0; j < selectBox.length; j++) {
                        selectBox[j].selected = false;
                    for (var j=0; j < selectBox.length; j++) {
                        sbvalue = selectBox[j].value;
                        for (var k=0; k < NotifyArray.length; k++){
                            if (sbvalue == NotifyArray[k]){
                                selectBox[j].selected = true;

USING MULTIPLE SELECT VARIABLE IN A SQL STATEMENT

In HTMLDB, the value of the parameter of a multiple select box is colon delimited(ie P6_Name = Smith:Jones:Burke). Is there an easy way to use this parameter in a SQL statement?
Example
Select *
from names
where
Name=P6_Name
Select *
from names
where
Name IN ('Smith','Jones','Burke')
Thank you

Thank you for your response! I'm an idiot. It didn't make sense to me because your talking about a <i>multi-select</i> variable and I was thinking about a <i>select-list</i> variable. My problem is that I need to assign a list of values to one select list item.
<br>
For example:
<br>
SELECT * FROM EMPLOYEE
WHERE EMPLOYEE_TYPE IN ( :SELECT_LIST_RETURN_VALUE );
<br><br>
With the select list as
<br><br>
Display value = All Types, Some Types, One Specific Type<br>
Return Value = (Type1, type2, type3), (type1, type2), (type3)
<br><br>
I've just started in all of this so I'd imagine that I'm probably going about it wrong.

Multiple select list in Safari 8.1 is broken again

Multiple select list is broken again in iOS 8.0.* and 8.1 Safari.
Few temp solutions can be found here until apple fixes this issue again.
Multiple Select box does not retain selected choice
Multiple Select on Safari - iPhone iOS 7

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Dynamic page with multiple select in where clause

Hi,
I have a dynamic page and in the where-clause, i have a bind variable. In a report i use for instance
and rtrim((to_char(date_time5,'DAY'))) IN :v_day
That works ok in a report. But it does not work in a dynamic page.
what code is needed to work with a multiple select box on the customize screen for a dynamic page?
Thanks.

Hi.
I have a dynamic page, with a bind variable :v_day. On the customization screen the user can select one or more days of the week, or all days. I use this also in a report and then it works ok. In the where clause i use:
and rtrim((to_char(date_time,'DAY'))) IN :v_day
Date_time is a tablecolumn (date).
When i add this line in the select script from the dynamic page, i get error:
: ORA-06550: line 1, column 2443:
PLS-00103: Encountered the symbol "" when expecting one of the following:
The symbol "(" was substituted for "" to continue.
ORA-06550: line 1, column 2606:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
. ( ) , * @ % & - + / at mod rem <an exponent (**)> and or ||
The symbol ")" was substituted for ";" to continue.
ORA-06550: line 1, column 3236:
PLS-00103: Encountered the symbol "" when expecting one of the following:
The symbol (WWV-11230)
Critical Error in wwerr_api_error.get_errors! SQL Error Message: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-)
Thanks.

Change Selection fields into Multiple Selection

Hello,
I would like to know if it is possible to change a standard Selection fields box into a Multiple Selection box.
Example:
In VA05, I have this (Further Sel.criteria > PO number)
I want it to be like that (like in VA05N)
Therefore, when I click on the Multiple Selection button, I have all the standard options as shown below:
Any hint how it can be done would be appreciated.
Thanks
Regards

click on 'Select Ranges' and you can able to eneter multiple ranges as you are looking.

Custom Spry Validation... Multiple Select

http://www.mredkj.com/tutorials/tutorial005.html
I am trying to have a 'multiple' select box where the user would enter answers to a trivia question. It is the same concept as the example in the link.
1.     User types answer in textfield
2.     Hit "add"
3.     javascript adds a new option in multiple select box with new answer.
Would it be possible using spry to validate that a user at least enters 1 answer? Max of 3? I appreciate any direction or suggestions on a new approach!

http://www.mredkj.com/tutorials/tutorial005.html
I am trying to have a 'multiple' select box where the user would enter answers to a trivia question. It is the same concept as the example in the link.
1.     User types answer in textfield
2.     Hit "add"
3.     javascript adds a new option in multiple select box with new answer.
Would it be possible using spry to validate that a user at least enters 1 answer? Max of 3? I appreciate any direction or suggestions on a new approach!

Need help with moving items betwen 2 netui select boxes

Hi,
I have 2 multiple select boxes for possible courses and assigned courses. I need a way to implement move of option items from one box to another using buttons. The user can select courses from one box and move them to another. I am not sure how I would do that with netui select boxes and a pageflow method. If I use javascript, i get all kinds of errors even though I am trying to use the tagid. If validation fails, then the select boxes dont save the updated content.
Please help.
Bindu

Ahmed_Arafa wrote:
hii all,
i have a list item.. in this list item i have a two list item value
1- visa ,list elements visa
2- cash ,list elements cash
i need when user select visa from list item then appear text item (visa_number)
i change item visa_number visible to no
that's my code i write it
trigger
when new-block-instance
IF :RESERVATION.PAY_METHOD = 'visa'THEN
SET_ITEM_PROPERTY('RESERVATION.VISA_NUMBER',VISIBLE,PROPERTY_TRUE);
ELSE
SET_ITEM_PROPERTY('RESERVATION.VISA_NUMBER',VISIBLE,PROPERTY_FALSE);
END IF;**My problem is when i click on cash in the first nothing happen and this right
when i click to visa second nothing happen this not right
**when i click on visa first every thing is working
i need when i click on visa any time item appear and when i would like to click to cash.. visa item is disappearWrite your code in When-List-Change trigger at list_item.
Hope this will help you.

Multiple selection box

Similar Messages

Maybe you are looking for