Multiple selection in OVS possible?

Hello all,
Is it possible to implement multiple selection in OVS?
Thanks,
Raj Balakrishnan

Hi,
From what I have seen, multiple selection in OVS is not possible.
Think of the R/3 search helps. There you can select only a single value for each field. In case you are trying to specify a range, you will have to select a single entry for a low value and another single entry for the high value. Also if you are trying to specify a list of values, then you should select singular entries for each list element.
Regards,
Satyajit.

Similar Messages

BW Tree Hierarchy-multiple selection for query possible?

Hello,
I have a question in regards to BW Tree Hierarchies and its usage in Bex Reporting:
Is it possible to select multible Tree Hierarchy (based on the same characteristic) when executing a query in Bex Analyzer. If yes, how?
I tried to configure this by making use of a hierarchy variable on the characteristics, but it does only allow me to select one hierarchy.
Thanks for your help,
Elisabeth

Elisabeth,
Your query can only assign one hierarchy per characteristic.
If you need multiple ones - I'd suggest you make a query per hierarchy and you can user Query Views in the WAD to let the user select the View (i.e.. the Hierarchy) they wise.
Regards
Gill

No Data when doing multiple selection of sub-brand in the cube

Hey everyone.
I am having a very strange situation.
No Data when doing multiple selection cube.
The thing is that the situation is created only in the transition between the servers, who have a different Build but both of them are SQL 2008R2 servers.
The Build of one of them is 10.50.2789.0 and the other one is 10.50.4000.0 (SP2).
The other properties of the cube are the same, it's Not possible to retrieve data from the cube on the server with the "SP2 when we the slicing is at the level of sub-brand and removed even one item mean we passed a multiple selection ,
This is possible only if we connect the cube as Admin .
While the server with the older "Build" the problem to perform the above operation when connected as a user not exist.
What can cause this problem,and how can we fix it?
thank's a lot.

Hi Doron2Bull,
According to your description, there are two servers in your scenario, and you cannot retrieve data from one of the cube, right? Are there any differences between the two cubes on different? You can import the database on the server into BIDS and explore
Data on the fact table on the Data Source View to check if there are any data. If we can see the data when we do Explore Data on the fact table on the Data Source View (DSV), but when we browse the cube here is no data. Then there are many possibilities for
this issue.
On the cube's Dimension Usage, the relationship between this measure group and the dimension is not correctly defined.
On the relational database, the dimensional key column on the fact table does not correspond to the key column on dimension table.
There is a Default Member on another dimension, and there is no fact table row that satisfy this condition.
If I have anything misunderstood, please point it out.
Regards,
Charlie Liao
TechNet Community Support

JFileChooser Multiple selection not working on Mac using apple, command key

I am using Java 1.4 webstart on Mac machine.
The code is :
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode(2);
fileChooser.setMultiSelectionEnabled(true);
Once the File dialog opens I have problems in selecting random multiple files. Apple key or command key is used for random selection on Mac. When using either of these keys multiple selection is not possible. Whereas I am able to select files using the shift key by which row selection is possible.
If this is not a bug and some code changes are to be done it would be fine if somebody can help me out in this.
If this is a bug in Java 1.4 and is this fixed in Java 1.5?

All EIDE / ATA (Parallel) devices (drives, opticals) allowed for two such drives or devices on one bus. The old style was "master" and "Slave" but CS is a "smart" approach, however, the master or only device must be on the end position. Also, the end connector will be black, the middle (slave) is gray.
Eject sends signal to master
To eject the "slave" device you use a modifier key.

JFileChooser Multiple selection not working on Mac using apple key

I am using Java 1.4 webstart on Mac machine.
The code is :
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode(2);
fileChooser.setMultiSelectionEnabled(true);
Once the File dialog opens I have problems in selecting random multiple files. Apple key is used for random selection on Mac. When using the apple key multiple selection is not possible. Whereas I am able to select files using the command key by which row selection is possible.
If this is not a bug and some code changes are to be done it would be fine if somebody can help me out in this.
If this is a bug in Java 1.4 and is this fixed in Java 1.5?

All EIDE / ATA (Parallel) devices (drives, opticals) allowed for two such drives or devices on one bus. The old style was "master" and "Slave" but CS is a "smart" approach, however, the master or only device must be on the end position. Also, the end connector will be black, the middle (slave) is gray.
Eject sends signal to master
To eject the "slave" device you use a modifier key.

Choices - Checkboxes (allow multiple selections) Links

Is there a way to make the below possible:
This is with respect to Sharepoint 2010 list functionality
I have a list with 7 choices
The type of choices is: Checkboxes (allow multiple selections)
Is it possible to have links as the various choices as compared to plain text?
Is there any other alternative to have links with multiple selection option which works like choices option in a list?
Thanks,
Abhilasha Thackur

Hi,
According to your post, my understanding is that you wanted to have links as the various choices as compared to plain text.
There is no out of the box way to accomplish this with SharePoint.
By design in SharePoint, the options in the Choice filed look like Single line of text type.
To achieve what you want, you need to custom filed Type programmatically.
More information:
Walkthrough: Creating a Custom Field Type
Creating Custom SharePoint 2010 Field Types
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Is it possible to diable multiple selections in JTable and JList?

as the title states, is it possible to disable multiple selections? how to prevent user from using ctrl or shift keys to select multiple rows?

Use the setSelectionMode(ListSelectionModel.SINGLE_SELECTION ) for your JList / JTable.

Multiple Row Selection in OVS

Hi,
I want to select multiple rows in OVS and bring back all selected values into one of the input field.
In Detail
I have applied OVS on 'Project ID' input field. OVS shows a list of project ID and their project name.
I want to enable user to select Multiple projects by selecting multiple rows in OVS and then i want to fill an another input field on main page with these selected Project IDs ( comma separated ).
Please Help.

Hi Rohit,
Go through the SAP Standard Component of WDA - "WDR_TEST_OVS" .Within this component u will find your answer.
Thanks & Regards
Manoj Kumar

Possibility for multiple selection in F4 help

Hi,
at the moment I have to change the marketing attributes in PCUI. We need a functionality that allows us to select multiple values in the F4 help and depending on the amount of selected values the amount of entries for marketing attributes will be generated.
Is there a possibility to realise a multiple selection in F4 helps?
What needs to be done?
Would be great if you could help me.
Kind regards,
Timo

Hi Naveen,
thanks for your help. Just to be sure, I meant a standard simple F4 help using F4_main.do. Is it somehow possible to change it there for one specific F4 help or do I need to develop a complete new BSP application for it? The BSP application I'm talking about is not a custom developped application but generated through F4_main.do
Kind regards,
Timo

Multiple selection customer field at header level... Is it possible?

Y'all,
I would like to know if it's possible to append a table into the include structure (CUF) at header level in the contract and create a search help screen with multiple selection values return.
This requirement comes because we have to mantain a 1:N relationship between a contract and customer field at header level.
If you have any idea or comment please let me know.
Best regards,
Jerry.

Hi
<u>I have not tried, but seems to be possible.</u>
<b>Please go through the SAP OSS Notes -></b>
Note 672960 - User-defined fields 2
Note 762984 - SRM40-SUS: Implementation of customer enhancement fields
Note 882256 - SRM-SUS: Customer fields for SUS invoice header missing
Note 749196 - SRM40-SUS: SP01 Redefining UI settings
Note 809628 - Table like customer fields from bid invitation in bid
Note 809630 - Customer field in bid invitation and bid - How does it work?
Note 458591 - User-defined fields: Preparation and use
Hope this will help. Do let me know.
Regards
- Atul

Multiple selection in the ALV is not possible after system upgrade

Hi Colleague,
I had been using an ALV, which was performing as desired before, but recently we had a system upgrade to NW7.0 and after that in this ALV multiple selection of records/rows is not allowed.
The colleagues who upgraded the system suggested that this may be because this ALV is instantiated at many places. I would request you to kindly provide a solution for the same ASAP, as I am not able to proceede ahead.
Warm regards,
Roopesh

Hi all,
Thanks for your replies, I had figured out the actual problem. The reason was, the referance of the selected rows was lost as I was doing bind elements to the context after moving to wddomodify.
So I figured out an alternative solution to avoid binding on selection of records.
Best regards,
Roopesh
Edited by: Roopesh Dolle on Apr 14, 2011 7:04 AM
Edited by: Roopesh Dolle on Apr 14, 2011 7:05 AM

VT04 - multiple selection variants possible?

Hello,
When we create shipments "manually" via VT01n, we have 2 different selection variants to add deliveries onto the shipments:
- one variant which selects all deliveries without route schedule also those for which the goods issue date is in the future
- one variant which selects all deliveries with route schedule and where the goods issue date of delivery is set on "Today" or in the past
There is no way to "combine" these 2 variants into 1 variant, because we would miss some deliveries that way
We want to use transaction VT04/VT07 to automatically create these shipments.
But in the selection screen of VT04, you can only set one selection variant (field is not "multiple selectable) to add deliveries and there is no option to set the 2 selection variants we have created above
Are there any other options?
Thanks for your help.
Kr,
Alexander
Edited by: Alexander Vilain on Jan 21, 2011 12:11 PM

Hi Alexander,
They way I interpret your question is, when you use VT01N you have the option of grouping deliveries into one shipment i.e . multiple deliveries into one shipment.
Based on that understanding :
Did you try to use transportation chain option in VT04 to group deliveries.
Click on the "Create Transportation Chain "
And use " Multiple grouping criteria and data options " as required by you.
You can have same shipping type for example truck and group the deliveries as main, preliminary legs etc.
There needs to lot of testing to make sure deliveries are picking up correct and later VT07 to schedule batch job
Let me know if this helps.
Thanks
Naga Yarramsetty

Is it possible to paste multiple selections from excel?

How do you detect in Java whether a multiple selection in excel has been copied to the clipboard.
For instance: I have an excel spreadsheet - 3 rows x 3 columns. I highlight the first 3 rows in column 1 and the first 3 rows in column 3 then I copy this to the clipboard (ctrl-c). If I now go to a text editor and paste this then the data from all 3 columns, not the expected 2 columns, appears.
Likewise, in Java I have tried using the clipboard object looking at all the different data flavours to find a way of detecting that only data from the 1st and the 3rd columns were copied. But I can't find a way.
This is most likely a microsoft issue in that they never make this information available from the clipboard.
Can anyone shed any light on this one?

Use the setSelectionMode(ListSelectionModel.SINGLE_SELECTION ) for your JList / JTable.

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Search help multiple selection of search results

Hi,
I have a search help (SE11) and it is correctly integrated in my WDP4A application using 'automatic' search help integration. Unfortunately multiple selection of search results does not seem to be supported (the ok button greys out when >1 result is selected). Is there a standard way to link a search help to an attribute in a 0..n value node, so that at runtime a new context element is created for each selected search result? Or do I have to recreate the search help from scratch to get this behaviour (OVS)?
If the latter is true, then why is it even possible to select multiple search results?
Kind regards,
Jeroen

Hallo Jeroen,
OVS standard configuration does not allow you to select more than one configuration, You need to specify that explicitely on Phase-0 of OVS using the set_configuration method.
see
[Multiple Selection in F4 help|Multiple Selection in F4 help]
[http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP|http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP]
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cee684-ccbb-2c10-3c94-91e806e5f7ac?quicklink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cee684-ccbb-2c10-3c94-91e806e5f7ac?quicklink=index&overridelayout=true]

Multiple selection in OVS possible?

Similar Messages

Maybe you are looking for