Multiple selection screen.

hi all,
how to create multiple selection screens,
i need 3 selection screens how to do it?
wats the maximum number selection screen can be created in a report.
regards
Suprith

SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS: p1 TYPE c LENGTH 10,
            p2 TYPE c LENGTH 10,
            p3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
PARAMETERS: q1 TYPE c LENGTH 10,
            q2 TYPE c LENGTH 10,
            q3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 200.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = 'Selection Screen 1'.
button2 = 'Selection Screen 2'.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'PUSH1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
        WHEN OTHERS.
      ENDCASE.
ENDCASE.

Similar Messages

Hide the Range Option in Multiple Selection screen

Hai,
I Give the values In single Values In Selection Option Screen.
I want to need Hide the Range Option Include or Exclude In Multiple selection screen.
Regards,
Geetha

just check this it may help you
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822</a>
here restricting the selection screen
regards
shiba dutta

RAR5.3 not able to cut and paste list of users to Multiple Selection screen

CC V4.0 on ABAP system has a feature where you can cut and paste a list of many users from the clipboard to Single Values column in the Multiple Selection screen, so you can run SOD Analysis Report for all those users. The Multiply Selection screen is a standard SAP supplied pop up screen.
With RAR 5.3 the Multiply Selection screen design is different. There is no longer feature to cut and paste from clipboard. We have to input each user one at a time. So if you have many users (20, 30, etc.) it is a time consuming task. It is not acceptable to our business power users.
We can import the list of users to a Custom User Group (in the Configuration Tab). First of all, there is no mass delete on Custom User Group. You have to delete each user one at a time which is time consuming. The alternative is to create a new Custom User Group each time, then it becomes a maintenance nightmare. Secondly, it is in the Configuration Tab which is only available to Administrators (fear of users changing configuation data), so the Administrator (or whomever has access to the Configuration Tab) has to maintain the Custom User Groups which is a lot of work for him or her or them.
We talk to SAP every week. But they are looking at this as a long time project. Does any one of you (or your company) has the same requirements? How do you get around it? Did you setup some other procedures so users can cut and paste the users list and run the Risk Analysis report themselves?
Thanks,
John.

This is probably a JVM issue. Are you using JInitiator or the IE native JVM?
I suggest you turn on the JVM console, set the trace level to maximum, and then watch what happens when you attempt the copy.
Also, check the key mapping (usually ctrl-k) that the forms applet is implementing. Perhaps ctrl-c means something else...

Add multiple selection screen

Hi!
I've set up an initial screen (selection screen) in my dynpro-program, with company code (BUKRS) as input field. This screen has been developed using the Screen Painter and is of the screen type 'Normal'.
I have managed to add a search help to the input field, but how can I add a multiple selection screen to it?
Thank you for all your help!
- Mari Virik

HI,
Create button beside BUKRS field.
and use FM K_CMPERS_MULTIPLE_SELECTION when the button is pressed.
this FM provides u a multiple selection screen. Use 'R' for Fieldtype.
data: parm like cmpersdata occurs 0.
call screen 300.
*& Module USER_COMMAND_0300 INPUT
 text
module USER_COMMAND_0300 input.
case sy-ucomm.
when 'MULT'.
CALL FUNCTION 'K_CMPERS_MULTIPLE_SELECTION'
EXPORTING
 p_fieldtype = 'R'
 p_fieldname = 'MATNR'
 p_tablename = 'MARA'
tables
 pt_parm = parm
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endmodule. " USER_COMMAND_0300 INPUT
Regards
CNU

How to disable the SELECT-OPTINS multiple selection screen's Ranges options

Hi this is sekhar,
                  I have used the Select-options: statement with 'No-Interval' option. Now I need to restrict the user not to enter the values in the Ranges column of multiple selection screen. How can I do it....

You can also refer this code as below : CHECK OUT SELECT OPTION sel_1_0.
*& Report ZTESTREP
REPORT ztestrep.
Include type pool SSCR
TYPE-POOLS sscr.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA opt_list TYPE sscr_opt_list.
DATA ***      TYPE sscr_***.
Define the selection screen objects
First block: 3 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK block_0 WITH FRAME TITLE text-bl0.
SELECT-OPTIONS sel_0_0 FOR sy-tvar0.
SELECT-OPTIONS sel_0_1 FOR sy-tvar1.
SELECT-OPTIONS sel_0_2 FOR sy-tvar2.
SELECT-OPTIONS sel_0_3 FOR sy-tvar3.
SELECTION-SCREEN END   OF BLOCK block_0.
Second block: 2 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK block_1 WITH FRAME TITLE text-bl1.
SELECT-OPTIONS sel_1_0 FOR sy-subrc.
SELECT-OPTIONS sel_1_1 FOR sy-repid.
SELECTION-SCREEN END   OF BLOCK block_1.
INITIALIZATION.
Define the option list
ALL: All options allowed
MOVE 'ALL'        TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
NOPATTERN: CP and NP not allowed
CLEAR opt_list.
MOVE 'NOPATTERN' TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne.
APPEND opt_list TO restrict-opt_list_tab.
NOINTERVLS: BT and NB not allowed
CLEAR opt_list.
MOVE 'NOINTERVLS' TO opt_list-name.
MOVE 'X' TO: opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
EQ_AND_CP: only EQ and CP allowed
CLEAR opt_list.
MOVE 'EQ_AND_CP' TO opt_list-name.
MOVE 'X' TO: opt_list-options-cp,
               opt_list-options-eq.
APPEND opt_list TO restrict-opt_list_tab.
JUST_EQ: Only EQ allowed
CLEAR opt_list.
MOVE 'JUST_EQ' TO opt_list-name.
MOVE 'X' TO opt_list-options-eq.
APPEND opt_list TO restrict-opt_list_tab.
Assign selection screen objects to option list and sign
KIND = 'A': applies to all SELECT-OPTIONS
MOVE: 'A'          TO ***-kind,
        '*'          TO ***-sg_main,
        'NOPATTERN' TO ***-op_main,
        'NOINTERVLS' TO ***-op_addy.
APPEND *** TO restrict-***_tab.
KIND = 'B': applies to all SELECT-OPTIONS in block BLOCK_0,
            that is, SEL_0_0, SEL_0_1, SEL_0_2
CLEAR ***.
MOVE: 'B'          TO ***-kind,
        'BLOCK_0'    TO ***-name,
        'I'          TO ***-sg_main,
        '*'          TO ***-sg_addy,
        'NOINTERVLS' TO ***-op_main.
APPEND *** TO restrict-***_tab.
KIND = 'S': applies to SELECT-OPTION SEL-0-2
CLEAR ***.
MOVE: 'S'          TO ***-kind,
        'SEL_0_2'    TO ***-name,
        'I'          TO ***-sg_main,
        '*'          TO ***-sg_addy,
        'EQ_AND_CP' TO ***-op_main,
        'ALL'        TO ***-op_addy.
APPEND *** TO restrict-***_tab.
KIND = 'S': Applies to SELECT-OPTION SEL_0_3
CLEAR ***.
MOVE: 'S'        TO ***-kind,
        'SEL_0_3' TO ***-name,
        'I'        TO ***-sg_main,
        'N'        TO ***-sg_addy,
        'JUST_EQ' TO ***-op_main.
APPEND *** TO restrict-***_tab.
Call function module
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
             restriction                = restrict
          DB                          = ' '
       EXCEPTIONS
             too_late                   = 1
             repeated                   = 2
             not_during_submit          = 3
            db_call_after_report_call = 4
            selopt_without_options     = 5
             selopt_without_signs       = 6
             invalid_sign               = 7
            report_call_after_db_error = 8
              empty_option_list          = 9
             invalid_kind               = 10
             repeated_kind_a            = 11
             OTHERS                     = 12.

How to create Multiple Selection Screen in ALV

Hi,
Can anybody tell me how to create the Multiple Selection screen in ALV reports.
Plse give me code sample if possible.
Thanks in advance
KP

Hi Rich,
thanks for the reply.
I am creating a report. in that for one field, i need to create a multiple selection screen. i mean in the output screen , i need to get the multiple selection screen for that field. in that i should be able to select multiple values, or single values or range of values.
eg: if i take the field kunnr, i should be able to select the multiple kunnar values in the output screen.
Hope my problem is understood.
Thanks
KP

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

Multiple selection screen is blank in screen personas SP2..

Hi,
When i click on multiple selection button, in the next pop-up screen getting blank data.
Unable to enter the values to execute the transaction.
Please suggest..
Regards,
Govind

Hi Tamas,
We tried to apply the related notes which you have mentioned in the previous post.
But, still not solved. Those notes are not able to apply in my system.
Can you please suggest any other solution..???
Regards,
Govind.

Dynamic variant calling multiple selection screens

Hi all,
The concerned issue is that i am trying to execute a report( which on execution throws a selection screen) from a program using 'submit' statement passing a variant. along with it iam creating a dynamic varinat using FM RS_CREATE_VARIANT, the variant is being made, but on execution , the program throws an error meassage " invalid variant called'.
This is because the varinat is calling multiple screens , although only one screen number is passed in teh FM,( screen no 0170).
Please tell me the possible solution fr this .
Cheers,
Thanks in advance.

Hi,
first try to pass only the static variant with the submit statement and c whether its working properly.
and than check for dynamic variant..
c the difference and let me know what happens ??
thanks
ravi aswani

Selection Screen - multiple selection screens!!

Hi All,
There is one requirement where in I want my first selection screen to have 7 radio buttons and on selection of each one , there should be specific selection screens displayed. I know that one way to solve this is create multiple programs and call the program on each selection. But is there a way to do it in the same program. Kindly advice.
Thanks & Regards,
Sowmya

Hi,
Instead of different screens you can display the fields on the same screen based on the radio button selection...
Check this example..
PARAMETERS: P_RAD1 TYPE XFELD RADIOBUTTON GROUP G1 USER-COMMAND USR
 DEFAULT 'X',
 P_RAD2 TYPE XFELD RADIOBUTTON GROUP G1.
* SCREEN 1.
PARAMETERS: P_MATNR TYPE MATNR MODIF ID M1,
 P_KUNNR TYPE KUNNR MODIF ID M1.
* SCREEN 2.
PARAMETERS: P_LIFNR TYPE LIFNR MODIF ID M2,
 P_EBELN TYPE EBELN MODIF ID M2.
AT SELECTION-SCREEN OUTPUT.
IF P_RAD1 = 'X'.
* INVISIBLE THE OTHER SCREEN FIELDS.
LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'M2'.
 SCREEN-INVISIBLE = '1'.
 SCREEN-INPUT = '0'.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
ENDIF.
IF P_RAD2 = 'X'.
* INVISIBLE THE OTHER SCREEN FIELDS.
LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'M1'.
 SCREEN-INVISIBLE = '1'.
 SCREEN-INPUT = '0'.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
ENDIF.
Please let me know if you have any questions..
Thanks,
Naren

Multiple selection screens with status gui

Hi,
I want to make a report with two selection screens and i should create a status gui for these two.
So, I've tried to do, the following:
* FIRST SCREEN
SELECTION-SCREEN BEGIN OF BLOCK bk WITH FRAME.
PARAMETERS: pa(200) TYPE c.
SELECT-OPTIONS: so FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK bk.
* /FIRST SCREEN
* SECOND SCREEN
SELECTION-SCREEN BEGIN OF SCREEN 2000.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME.
PARAMETERS: pa2(200) TYPE c.
SELECTION-SCREEN END OF BLOCK bk1.
SELECTION-SCREEN END OF SCREEN 2000.
* /SECOND SCREEN
AT SELECTION-SCREEN OUTPUT.
SET PF-STATUS 'Z_STAT'.
SET TITLEBAR 'COISO'.
AT SELECTION-SCREEN.
IF sy-dynnr EQ '1000'.
 CASE sy-ucomm.
 WHEN 'BACK' OR 'EXIT' OR 'CANC'.
 LEAVE TO SCREEN 0.
 WHEN 'EXECUTAR'.
 CALL SELECTION-SCREEN 2000.
 IF sy-subrc <> 0.
 LEAVE TO SCREEN 1000.
 ENDIF.
 ENDCASE.
The problem is that on the first selection screen i have the status gui that I've created, but when i use CALL SELECTION-SCREEN 2000
the status gui (Z_STAT) is not assigned with the screen 2000.
Is this possible? If yes how, and how can i capture which button on status gui of screen 2000 was clicked, because the field sy-ucomm after the call selection-screen 2000 is not updated?
Regards,
Pedro Bessa

harsh bhalla,
its the same report. with two selection-screens. Can't i have status gui for both of them?
Gurpreet Singh,
I have a selection screen. Not a screen. Can a have a pbo for a selection-screen? or one for each selection-screen?
The table SSCRFIELDS and the field sy-ucomm stays with the value from the first selection-screen.
Regards,
Pedro Bessa

Multiple selection screens for report

I need to display 2 separate selection screens prior to executing the report.
1. A selection screen to enter the material & plant
2. Based on the material and plan another selection screen to display the inspection characteristics associated with the material and be able to select (as checkbox) the inspection characteristic that needs to be used as filtering criteria.
The first selection screen I can do. But how do I invoke the second selection screen that displays the insp. char. Also how do I design such a selection screen and populate the contents
I would like something like
[CheckBox] Inspection Plan Inspection Characteristic [Editable upper limit] [Ediatable Lower Limit]
But other ideas to implement this are welcome as well.

Megan,
Say thanks to SDN.No need to give points to this.
TABLES:EBAN.
SELECTION-SCREEN BEGIN OF SCREEN 100 TITLE title.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER:rad1 RADIOBUTTON GROUP rad USER-COMMAND frad1 DEFAULT 'X',
          rad2 RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETER: mtr AS CHECKBOX MODIF ID g3 USER-COMMAND chk1,
           p_matnr TYPE eban-matnr MODIF ID g1,
           sloc AS CHECKBOX MODIF ID g3 USER-COMMAND chk2,
           str_loc TYPE eban-lgort MODIF ID g4.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: matnr1 FOR eban-matnr MODIF ID g2.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN PUSHBUTTON /20(10) name USER-COMMAND UCOM.
SELECTION-SCREEN END OF SCREEN 100.
*name = 'FETCH'.
title = 'Test Report'.
CALL SELECTION-SCREEN '100'.
TYPE-POOLS slis.
AT SELECTION-SCREEN OUTPUT.
IF rad1 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1' OR screen-group1 = 'G4'.
        screen-active = '1'.
        screen-input = 0.
      ELSEIF screen-group1 = 'G2'.
        screen-active = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF rad2 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1' OR screen-group1 = 'G4' OR screen-group1 = 'G3' OR screen-group1 = 'G5'.
        screen-active = '0'.
      ELSEIF screen-group1 = 'G2'.
        screen-active = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF mtr = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1'.
        screen-input = 1 .
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF sloc = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G4'.
        screen-input = 1 .
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
clear sy-ucomm.
iflag = 1.
K.Kiran.

[Help] Multiple Selection at Select Options.

People, I've coded following Select Options:
DATA: g_created TYPE zapomatxref-erdat,
            g_modif   TYPE zapomatxref-aedat,
            g_matnr   TYPE zapomatxref-pr1_material.
SELECT-OPTIONS: s_creat FOR g_created,
                               s_modif FOR g_modif,
                               s_matnr FOR g_matnr OBLIGATORY.
Thing is, when I execute the program and hit the Multiple Selection, an error pops up saying "Fill in all required fields".
I know it goes through PBO validating that OBLIGATORY so I can't enter the multiple selection screen.. But is there a way to enter the multiple selection screen without changing the OBLIGATORY adition ?
Thanks in advance.
PS: This is an executable program, not module pool. Also I want to enter Mutliple Selection screen without filling s_matnr.

Guys, solved the problem. You have to remove the OBLIGATORY addition and set the following code.
("Percentage symbol" below is the traditional percentage centessimal symbol we know, the mozilla wont let me insert it...)
TOP Include:
CONSTANTS: c_per002     TYPE c    VALUE '(percentage symbol)002'.
MAIN PROGRAM:
AT SELECTION-SCREEN ON s_matnr.
IF sy-ucomm NE c_per002.
    IF s_matnr[] IS INITIAL.
      MESSAGE e025(ycapo).
    ENDIF.
ENDIF.
START-OF-SELECTION.
PS: c_per002 comes to be the sy-ucomm value when hitting Multiple Selection Button at Selection Screen.. As any action validates the whole screen, you just set a clause when you don't want to validate if sy-ucomm not equals (different from) c_per002.

SELECT-OPTIONS Multiple selection

Hello
I have the following line of code:
SELECT-OPTIONS: p_matnr FOR mara-matnr.
The users would like to use the multiple selection button to paste/upload from the clip board but unable until at least one entry is entered before the multiple selection will work. Is there a way for the multiple selection to work without entering a material?
THANKS

Hi Gary, Clicking the button shown below bring up the multiple selection screen without requiring a value. Do not add the obligatory keyword on the select-options statement as pointed out by Ramon.
see below:

'No Upload Authorization' While Uploading a Text File from Multiple Select

Hi all,
   The User is trying to upload a text file from Multiple Selection screen of a Query in BEx and it gives the error message of 'No Upload Authorization' (Error DB886).
   In 'Logon data' tab of Tcode SU01, it has 'User' for 'User Group for Authorization check' for this User.
   I could upload a text file from Multiple Selection screen with my User Id.
   An idea about this error, PLEASE ?
Thanks,
Venkat.

Hi Ron,
   This User does not have the access to Tcode ST01.
   The user executed Tcode SU53 immediately following the authorization failure to see the authorization objects. The 'Authorization obj' is blank and under the Description it has 'The last Authorization check was successful' with green tick mark.
Any further suggestions, PLEASE.
Thanks.

Multiple selection screen.

Similar Messages

Maybe you are looking for