Multiple Selection with JCombo Box
I want to make a multiple - selection JComboBox enables the user to select many items from JComboBox and copy items from one JComboBox to another.How can I do this?
Hello,
ComboBoxModel allows only single selection. It's better to use a JList instead because it isnt worthwhile the effort to create another multi-selection model.
regards,
Tim
Similar Messages
-
Multiple selection with wildcard in WAD
Hello,
How can I do filtering with multiple selection with wildcard in WAD 7 ?
We have this problem in two seperate situation. The first is in the parameter screen where we want to filer the output with two wildcard. The first one we can put on the field and then go to the selection screen but what about the other ????. The second situation is in the report when we want to filter one of the columns with wildcard.
I will appreciate if someone will open my eyes about this.
IlanHello,
you can use the * for wildcards in the BEx Web.
For example 37* -> 370000 up to 379999.
Buy,
André -
Multiple selection with control key in ring, enum, or radio buttons on Speedy-33 ?
Hi all,
I want to create a list of entries via ring, enum, or radio buttons. I just want the user to be able to select more than one entry from the list.. This is normally doable with windows applications by using control key. However, how could I do the same thing or let the user choose more than one entry from the list? Any idea is greatly appreciated..
Thanks so much!Hi Casiopea -
To answer your question, I'm not sure I've ever actually seen a ring, enum, or radio button control exhibit the "CTRL+click" behavior you're describing. (In fact, I think all of those user interface elements are designed specifically so that only one value can be selected at any one time.)
However, I have seen plenty of list boxes allow multiple selection, and LabVIEW's list boxes can do the same. A group of checkboxes can also end up looking like radio buttons if you group them with some "decoration" and would allow you to select multiple options (because you can check/uncheck each box independently).
I'm not quite sure, though, how your question relates to LEGO specifically. Did you accidentally post this question to the wrong discussion forum?
To address Eagles Coach's statements, the official Move block uses checkboxes in the "Port" section of the configuration pane in the MINDSTORMS software, not radio buttons. The Motor block uses mostly radio buttons, and I didn't see any sections that allow multiple selections.
James Blair
NI R&D -
Multiple selection in combo box
Hi,
How to save the selected values (with multiple selection) in to the database from combo box. I made it as multiple selection box by selecting value true for attribute Multiple, but only one value is saving in to database. How to handle it.
Regds,
SudhakarI 'll explain the requirement:
I have three tables, for example employee, department and empDept table which contains empId and DeptId. In my jsp, while inserting employee i need to give all existing departments in combo with multiselect option. When user press submit, i need to insert one record in employee, and records in empDept with new empId and all selected Department ids. empId is dbsequence generation.
(I did this through LOV mode of list binding editor. Even i select multiple values in JSP, its inserting only first selected record in to empDept table.) -
Multiple Selections in List Box
Hello all. I am new to the Adobe Family and especially PDF designing, so please bear with me. I have gone through the Help section, and did searches on here to find an answer but have not had luck. I need to make a list box that the user chooses multiple choices. As in some forms that have if you hold down the CTRL button you can choose multiple choices. During my searches I keep finding coding lines. I'm not sure how to do coding at all, I'm using the Designer 7 template forms where I can choose the icon, and then go over to Object, Value, etc. Is what I want to do even possible with Designer 7? If so, how can I make this work. If not, what program would I need to use? Thank you in advance for your help!
When I look at either a list box or a drop-down list and look at the "Field" tab I do not see a "Allow Multiple Selection" checkbox. I am using designer version 7.0.041126.0. Is it not supported in this version or am I missing something.
Thanks -
Allow multiple selections in 2nd box of cf_TwoSelectsRelated
Greetings. I'm very new to ColdFusion, so I apologize if this
seems like a no-brainer.
I've successfully used cf_TwoSelectsRelated to add related
selects to a form. I'm able to have a user select a school, and
have the second select box retrieve only the teachers that are from
that school. Now I'd like to allow multiple teachers to be selected
from the second list (to register for a workshop) and have them all
be inserted in my registration table as individual records.
I think I can figure out the second part of my task (insert
them as individual records) based on
Dan
Bracuk's answer to a query back in February. However, for the
first part (allow multiple selections in the second select list)
I'm not sure whether to:
a) try to edit the cf_TwoSelectsRelated custom tag (I think I
would need to know some JavaScript for that? yipe!)
or
b) do something to my existing code to allow the second
select to have multiple selections (but doesn't cf_select just
require that you specify in the attributes "multiple="true"? which
means I will probably need to edit the cf_TwoSelectsRelated custom
tag (back to *yipe*!)
Can anyone point me in the right direction? I've attached
cf_TwoSelectsRelated. Please let me know if you need me to supply
my code.
Thanks very much in advance.
MarianneDear Dan,
Thanks for this! Well, I went ahead and kept trying to figure
it out while I waited - I found and took a look at
cf_ThreeSelectsRelated and the third select box did indeed have a
"multiple" attribute - so I borrowed it and edited the
cf_TwoSelectsRelated (as attached - just added one line to the
attributes list and added one cfif to the cfoutput for the 2nd
select box), called it in the attributes of the
cf_TwoSelectsRelated tag call in my "add attendees" page - and it
seems to work great! No messing about with scary javascript needed.
*whew*
Now I just have to edit the code to allow it to insert each
set of id's as an individual record... but I think I can handle
that :)
Hopefully this will help someone who's wondering if this will
work. I couldn't find any reference to it anywhere! -
Multiple selection with F4 help in webdynpro
Hi all,
Is it possible to create F4 value help for a field in webdynpro which will support multiple selection?
If the user selects multiple entries, then a new input field will automatically be inserted. Much like F4 help on BW Web Templates.
Thanks,
Satyajit.Hi Satyajit,
Here is the link to the tutorial which Pran is talking about
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial on advanced value help and object value selector - 9.htm
and see the link below also which discusses on the listener events
Binding UI elements to Java Listeners
Regards
Rohit -
Hello!
I have a Frame with a JList that needs to be able to do multiple slection. The JList ist filled with special names which are found when the user opens a certain file. (so a file-chooser is here too) When the User selects a name every paragraph containing that name should be posted in a textarea.
However, when i run the program I can select multiple items, BUT it just recognises that the user selected one of the items, and I think it's the first one clicked.
How can I change that? I have used getSelectedValues() but it just won't work...
Can someone please help?
ThanksSo getSelectedValues() is only returning an array of size 1?
Paul -
Checkedlistbox allows multiple selections with Selection mode set to one
I have a simple CheckedListBox with three options. I set Selection Mode to One. When I test the form, it allows me to have more than one box checked. I can clear the other two with a program, but my understanding of Selection Mode was that it would not
allow more than one box to be checked if set on one.Option Strict On
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
CheckedListBox1.SelectionMode = SelectionMode.One
For i = 1 To 10
CheckedListBox1.Items.Add("Number" & i.ToString)
Next
End Sub
Private Sub CheckedListBox1_ItemCheckChanged(sender As Object, e As ItemCheckEventArgs) Handles CheckedListBox1.ItemCheck
Dim ItemIndex As Integer = e.Index
For i = 0 To CheckedListBox1.Items.Count - 1
If i <> ItemIndex Then
CheckedListBox1.SetItemCheckState(i, CheckState.Unchecked)
End If
Next
End Sub
End Class
La vida loca -
Multiple Selection on Selection Screen
Hello Friends,
Iam having a selection screen where I can enter a single value or range of values directly into the select-option fields or I can click on Multiple Selection button and enter the single value or Range of values. And whatever I enter in the Multiple selection that is stored in table s_lifnr (because I enter vendor details).
Now, my question is.....Is there any Function Module or any BAPI to get or read all the values of this table into another internal table because I want to use them in another BAPI where I need to pass the range of vendor codes to get list of line items.
So if I could make up an internal table which contains all the vendor codes selected from multiple selection with options like (=,>,<,<=,>=)in single value and (BT, I, E)in Range I can use this table in that BAPI.
Any kind of help is appreciated..
Thanks in Advance..
Regards,
Raju....Usually, you will want to select the vendors from the database.
data: ilfa1 type table of lfa1 with header line.
select-options: s_lifnr for lfa1-lifnr.
select * into table ilfa1 from lfa1
where lifnr in s_lifnr.
loop at ilfa1.
* do something with all selected vendors.
endloop.
Regards,
Rich Heilman -
Trying to retrieve the editValue of a list box selection with multiple selections
I have a requirement to display the text and the value of a multiple choice list box but as soon as there are multiple selections the value displayed is the rawValue.
My code is something like this:
verifSubTaskDescID.addItem(this.editValue);
verifSubTaskDesc.addItem(this.rawValue);
When "this" which is a list box with ["a","first"],["b","second"] is set to a or b it works perfectly, displaying "a" in the ID and "first" in the Desc as follows:
a first
OR
b second
but when I select both this list looks like this:
first first
second second
Any ideas on how to preserve the letters without making the code too complex or hard to maintain??
Thanks!!!Hi,
you can use a for loop to get all selected values from a choice list.
This could look like this.
This sample script goes to the exie event of the choice list.
It refers to the dataNode which holds the multiple values.
The for loop the then extracts the selected values and their associated display items.
var r = ""
for i = 0 upto $.dataNode.nodes.length - 1 do
r = Concat(r, $.dataNode.nodes.item(i).value, " ", $.getDisplayItem(i + 1) )
endfor
Textfield1 = r -
Change from 4.5 to 5,1 with multiple select list boxes
Had a multiple select list box which worked fine in 4.5 i.e
a comma seperated list would be passed to the corresponding set method
in the bean. We switch to 5.1 and this no longer works any one know of
the solution or a work around to the problem
Hugh McBride
[email protected]
Vladimir,
I am using a JSP/Java Beans design where the name of the
set
method in the bean match the name of the ui component so when the form
is submitted the method in the bean is automatically called. The method
request is a workaround but one we wanted to avoid using
Thanks
Hugh McBride
[email protected]
Vladimir Andral wrote:
> How are you getting the values? request.getParameter()?
>
> You should be using request.getParameterValues() if the parameter
> has more than one value.
>
> Check out the documentation for the HttpServletRequest interface.
>
> --
> Vlad
>
> Hugh McBride wrote in message <[email protected]>...
> >Had a multiple select list box which worked fine in 4.5 i.e
> >a comma seperated list would be passed to the corresponding set method
> >in the bean. We switch to 5.1 and this no longer works any one know of
> >the solution or a work around to the problem
> >
> >
> >Hugh McBride
> >[email protected]
> >
-
How can I export multiple selections in a list box into a .csv file?
Hi all, I've created a form in Acrobat X with a list box enabled for multiple selections. When I try to export the filled out form into a .csv file, only the first selection shows up. Can anyone help me figure out how to get all selections to export? Thanks!
Thank you for your quick response!
Once a recipient fills out the form (which has two questions with list boxes and multiple selection enabled) they send the completed form back to me. When I open the completed form, I am given the option add the completed form to a reponse file which was set up when I distributed the form. When I open the reponse file, it lists all of the responses in rows, and the values that were chosen in the form are arranged in columns. In this file, the list boxe columns have multiple values, separated by commas (which is what I'm looking for). At this point there is an option to export into a .csv file or an .xml file. If I choose the .csv file and open in excel, only the first selection shows in the list box column rather than all selections that were initially made by the responder. -
How To Enable a List Box To accept Multiple Selection
Dear all,
How can I enable a List box to accept multiple selection.If any body can please help me.
Thanks a bunch in advance
Regards
RakeshThe only problem is, the XML form data only contains the first selection made. All others are discarded. This is the first thing I've ever done with the Life Cycle Designer but the product seems somewhat in a version 1 state. Lots of features but no depth. Any suggestions about the XML?
-
Multiple Select boxes in one form
Does anyone know if it is possible to have multiple select
boxes inside one form? I have six different select boxes that are
generated by six separate queries. The action page for all six
select boxes is the same so I just want one submit button so users
don't get confuse. I don't want to cluster up the page with submit
buttons but I may resort to that option.
My problem is the select boxes generate a number and when
that number is submitted I want to pass two other variables with it
to the action page. I tried putting a "Form" tag around the 6
select boxes. Inside each select box I tried to add an "Input
type="hidden"" and give thte name and values that I needed. That
worked for the first select box but when I tried the second select
box it used the hidden values for the first select box.
If anyone can help, I would greatly appreciate it. Or if you
have any other suggestions I am open to any.
ThanksPaross1,
I wasn't thinking about that and you gave me a great idea.
Here is how I changed my select boxes.
<cfform
action="Resolution_History.cfm?year=#year#&sessiontype=#sessiontype#&btype=res"
name="form">
<select name="SRINPUT">
<option value="">SR
<CFOUTPUT Query="findSR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HRINPUT">
<option value="">HR
<CFOUTPUT Query="findHR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SCRINPUT">
<option value="">SCR
<CFOUTPUT Query="findSCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<br>
<select name="HCRINPUT">
<option value="">HCR
<CFOUTPUT Query="findHCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SJRINPUT">
<option value="">SJR
<CFOUTPUT Query="findSJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HJRINPUT">
<option value="">HJR
<CFOUTPUT Query="findHJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<INPUT TYPE="Submit" VALUE="Submit" alt="submit
button">
</cfform>
On the action page I need the below IF statement to work so
it will set the variables. It isn't working at this time. Its not
bringing the values of billnumber, houseorig or the billtype.
Do you have any thoughts? I know it is close. I need to set
all of the inputs to input4 to generate my queries.
<cfif form.srinput gt 0>
<cfset houseorig eq "s">
<cfset billtype eq "r">
<cfset srinput eq input4>
<cfelseif form.hrinput gt 0>
<cfset houseorig eq "h">
<cfset billtype eq "r">
<cfset hrinput eq input4>
<cfelseif form.scrinput gt 0>
<cfset houseorig eq "sc">
<cfset billtype eq "r">
<cfset scrinput eq input4>
<cfelseif form.hcrinput gt 0>
<cfset houseorig eq "hc">
<cfset billtype eq "r">
<cfset hcrinput eq input4>
<cfelseif form.sjrinput gt 0>
<cfset houseorig eq "sj">
<cfset billtype eq "r">
<cfset sjrinput eq input4>
<cfelse>
<cfset houseorig eq "hj">
<cfset billtype eq "r">
<cfset hjrinput eq input4>
</cfif>
Maybe you are looking for
-
Could not see the data in the cube
Hi all, Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube. I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data fr
-
Mon mac est de plus en plus lent (navigateur principalement)
Bonjour, je commence a devenir fou. J'ai un bon Powerboo G4 10.4.11, 1,67G 1G, il a deja 2 ans, mais il a toujours performant. Je passe la plus poart du temps a créé des site web. Donc j'utilise toujours mon browser, je travaille avec des outil appli
-
Hi All For countries like GB / US we have SORT code for banks which should get populated when making SWIFT payments (MT103). I can see only Bank number and Reference fields in Payment transactions of the Vendor Master Record. Is there any field which
-
"Preferences" in Safari missing
Hi With this latest version of Safari when I click on Preferences all I get is the autofill menu. No way to change home page etc. Any help would be appreciated. Thanks Evelyn
-
How can I hide the Navigation Input (at least the URL) in Firefox 29.0?
I need to hide it for demonstrations to prevent attendees from browsing to a site while I'm showing it. This new release is not as clean looking when all the toolbars are unchecked. A minimal mode with tabs only would be helpful...the previous releas