Multiple sized pages in the same book?

I have a 40 page book to design using InDesign. The challenge is that the last 6 pages need to be stagered so that each sheet is .25" wider than the rest of the book. Amy one have an idea how to change the page size?
Thanks 

The Book feature has been around since (at least) version 2.0 (before CS1).
To use this feature as requested by the OP, create a new document with the last 6 pages of the original document. Save a copy of the original document with the last 6 pages deleted.
You can then edit the page size of the document that holds the 6 larger spreads.
Create a new book file
File > New Book...
Use the book palette to add the two new documents to the book. Arrange them as needed.
You may wish to review the long document video podcasts from Michael Murphy. Chapter 33 starts the set.
-mt
Message was edited by: Michael Trout

Similar Messages

  • How can I insert an additional page without screwing up the master layouts? I have a document with multiple sized pages and the same master applied to each page.

    My document is currently 10 pages. There are 5 different sizes of the pages. They all have the same master page applied to them. When I go to insert a new page and/or duplicate a page...it screws up where the master layout goes. Surely there is simple way to do this??
    For example:
    These pages are all inserts for a sales folder.
    Pages 7 and 8 are sized at 8.5" w X 10.25" h. Pages 9 and 10 are sized at 8.5" w X 11" h.
    I need to duplicate page 8 and have it go between 8 and 9 and it needs to be sized like pages 7 and 8 (or 8.5" w X 10.25" h)
    When I go to to do this, it screws up the master page layout for the remaining pages of the document.
    I have tried several ways to do this. Can anyone help??
    Thanks!

    Try to define 5 different master pages.

  • Can multiple web pages use the same cookie?

    I have an applet that will reside in several different web pages. The applet creates a cookie that saves user preferences and loads them when the user next uses the applet. The problem is that I want the same cookie to load when the user views the same applet at a different IP Address. Is this possible? If so, how? I am currently using the netscape JSObject stuff to write and read my cookie.
    Thanks,
    Derek

    Sorry, you cannot access cookie across domains.
    If being able to access same cookie from different pages in the same domain satisfies you need, read on.
    Let's suppose you have two html files kept on your server as follow::
    MyHTML/main.html
    MyHTML/subDir/A.html
    Now, let say that when you save the cookie, the path is not specified. A.html will not be able to access the cookie set by main.html. However, if you specified PATH=/ (along with other values and expiry date-and-time), both html files will be able to access the same cookie via the document.getMember method.
    This is more of a JavaScript question than a Java question and you might want to pay a visit to the link below:
    http://forums.internet.com/WebX?[email protected]^[email protected]
    you can go to the bottom of that page, click search and type in cookie and you'll see a lot of Q&A on the topic.
    Good Luck
    V.V.

  • Multiple copies of the same book showing up in iBooks and it will not load just keeps spinning????

    Anyone else having problems with iBooks, multiple copies of the same book have shown up downloaded in my bookshelf, iBook doesn't want to load jus spins and spins, HELP!

    Have you tried to force quit iBooks?
    Double tap the home button. You'll see the app icons adn a preview show up on the screen. Scroll sideways if needed to get the preview and icon for iBooks on the screen. Flick the preview window up and off the screen. Then single tap on the home page preview, or on the home button to exit the mode then try to open iBooks again

  • Can I open multiple copies of the same book?

    I am reading a more technical book. It would be helpful to have multiple pages opened at the same time (for the purpose of reference)
    Is it possible to open more than one copy of the same book?
    I know that I can open the book on my iPad or iPhone, but I would like to open them both on my Mac.

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • How to load multiple HTML5 canvas on the same page (the proper method)

    Hi,
    I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
    Here is a sample of what I'm doing:
    1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
    2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
    3rd: Edit the javascript like this:
            <script>
                // change the default namespace for the CreateJS libraries:
                var createjsFirst = createjsFirst||{};
                var createjs = createjsFirst;
            </script>
            <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
            <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
            <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
            <script src="{{assets}}/js/first.js"></script>
            <script>
                function initFirstAnimation() {
                    var canvas, stage, exportRoot;
                    canvas = document.getElementById("firstCanvas");
                    exportRoot = new libFirst.first();
                    stage = new createjsFirst.Stage(canvas);
                    stage.addChild(exportRoot);
                    stage.update();
                    createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                    createjsFirst.Ticker.addEventListener("tick", stage);
            </script>
            <script>
                // change the default namespace for the CreateJS libraries:
                var createjsSecond = createjsSecond||{};
                var createjs = createjsSecond;
            </script>
            <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
            <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
            <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
            <script src="{{assets}}/js/second.js"></script>
            <script>
                function initSecondAnimation() {
                    var canvas, stage, exportRoot;
                    canvas = document.getElementById("secondCanvas");
                    exportRoot = new libSecond.second();
                    stage = new createjsSecond.Stage(canvas);
                    stage.addChild(exportRoot);
                    stage.update();
                    createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                    createjsSecond.Ticker.addEventListener("tick", stage);
            </script>
    <body onload="initFirstAnimation(); initSecondAnimation();">
    Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
    If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
    Many thanks!
    #flash #reborn

    I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
    $(document).ready(function () {
            var canvas, stage, exportRoot;
            // First movie
            canvas = document.getElementById("firstCanvas");
            exportRoot = new libFirst.first();
            stage = new createjs.Stage(canvas);
            stage.addChild(exportRoot);
            stage.update();
            createjs.Ticker.setFPS(libFirst.properties.fps);
            createjs.Ticker.addEventListener("tick", stage);
            // Second movie
            canvas = document.getElementById("secondCanvas");
            exportRoot = new libSecond.second();
            stage = new createjs.Stage(canvas);
            stage.addChild(exportRoot);
            stage.update();
            createjs.Ticker.setFPS(libSecond.properties.fps);
            createjs.Ticker.addEventListener("tick", stage);
            // Third movie
            canvas = dument.getElementById("thirdCanvas");
            exportRoot = new libThird.third();
            stage = new createjs.Stage(canvas);
            stage.addChild(exportRoot);
            stage.update();
            createjs.Ticker.setFPS(libThird.properties.fps);
            createjs.Ticker.addEventListener("tick", stage);

  • Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO

    Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)

    When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?

  • Scan multiple pages to the same computer file

    How can I scan multiple pages to the same computer file on my HP Officejet Pro 8600 Plus?  Currently it will only scan each page to a separate computer file.  I scan one document and then when it asks if I want scan another page I say yes and scan it.  However they still go to separate computer files. 
    Thanks!
    This question was solved.
    View Solution.

    Thanks so much!

  • Multiple details table on the same page

    Newbi to APEX. Can I have muliple details table for update/insert in tabular format on the same page with the same master? Thanks!

    In the meantime, I can answer to your questions:
    · Why does JHeadstart not make use of the UIX-Struts integration (see Chapter 15 of the UIX developer’s Guide)?This has been done to allow the same page to be run both with Struts and MVC Framework, without needing to change the page. Using the UIX-Struts integration would have made the pages 'controller aware'.
    · How do you specify which columns/attributes in a Table Layout are sortable?As far as generation is concerned, you can only specify the whole table to be sortable. In case of UIX you can post-gen modify the <sortableHeader> tag of each column separately. In case of JSP you can remove the <a href> tag for each column that you do not want to sort on.
    Jan Kettenis
    JHeadstart Team

  • Multiple MIDI takes on the same track - can only find one in the editor?

    After making several passes on an instrument track w/drum sampler on it I opened the piano roll editor to edit the data only to find only one of the passes represented there. I could only find the other passes when I moved the current one out of the track temporarily. There must be a better way to do this, can anyone hip me to the right way to edit all the data in the multiple passes at the same time? I can hear all the data, I just can't see all of it.
    I'm doing this so I only have to instantiate the Virtual Instrument once in the session, CPU is always at a premium these days. I have done the bulk of my work in recent years in ProTools but I have found Logic Express 8 to be far more efficient with CPU load on my core 2 duo Macbook. I suspect I'm just missing something but I cannot seem to figure it out. Help?

    I appreciate your comments but my issue was in editing the already recorded tracks. If you can find in those pages where it shows how to view all the data from the already recorded multiple MIDI tracks at the same time in the piano roll window and be able to edit them I'd be much obliged if you would point those out to me. I double checked your recommendation after reading your first reply, the answer I needed was not there.
    Evidently you can only select and view one region at a time no matter how many there are in the same track. I have searched the LE 8 pdf manual and also searched thru an Apple Logic Pro Training series book for version 7 JIC it had some additional insight into this particular issue and came up empty, that's why I was asking for additional insight on this panel. I always go to the documentation first - RTFM is first call for me.
    I've already figured the workaround and I'll know better next time to allow Logic to create its own multiple take folders so as far as I'm concerned this case is closed. Thank you again for your input.

  • What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

    What happens on iCloud when multiple family members use the same Apple ID?  For example if we all choose to use iCloud for contacts, are they all merged together?  We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

    Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
    You can only unravel this by
    1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
    2. Sign out of System Preferences>iCloud
    3. Create a new Apple ID and open a new iCloud account with it for your own use.
    4. Import the vCard back into the iCloud contacts page.
    5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
    6. Go to the new iCloud account and delete his contacts individually.
    Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

  • How do i set up multiple iCloud accounts on the same mac?

    how do i set up multiple iCloud accounts on the same mac?

    Interesting - I was sure I'd seen a note somewhere that it was only Mail, but this article:
    http://support.apple.com/kb/ts4020
    does say
    Your secondary iCloud accounts can be set up and viewed in Settings > Mail, Contacts, Calendars on your iOS device, or Apple () menu > System Preferences > Mail, Contacts, Calendars on OS X Lion. You may choose to do this if you have a second iCloud account and need to access its Mail, Contacts, or Calendar data. 
    Note: While you can configure multiple iCloud Mail accounts in iOS, Push mail will only work for the primary iCloud account in iOS. Secondary account(s) will check for mail based on the settings in Settings > Mail, Contacts, Calendars > Fetch New Data.
    It's not something I can test - I suppose the second account's data gets added to the lists in iCal and Address Book?

  • Can I use multiple sa-ns500 on the same network?

    Is it possible to use multiple sa-ns500 speakers on the same network?  they seem to want to have the same name on the network and therefore only 1 will connect at a time?  Can I rename one somehow?  Thanks!

    Hello Brian,
    Welcome to Sony Community.
    Please check for the Secure Link option in the Home Theater System or A/V Receiver. This will help isolate the connection to the different Network speakers.
    Yes, you can use multiple Network speakers on the same home network.
    You can change the Device name using the Setting screen on the browser.
    Follow the steps mentioned on the page # 34 and 35 of the User’s manual to start up the browser of the Network speakers and change the Device name.
    If my post answers your question, please mark it as an "Accepted Solution."

  • Multiple users\passwords on the same website with Safari

    Coming over from Netscape for MAC to Safari.
    Here is the issue-- In Netscape I was able to have multiple users/passwords for the same website page. Netscape controls its users/passwords; not the keychain. With Safari everytime I try to enter the second user/password this wipes out the first user and password.
    Is there a way with Safari to have mutlple users/passwords for the same website page?
    Thanks,
    Reed

    A service might call the other one.

  • How to permit multiple workspaces to access the same schema?

    Hello,
    When creating a new workspace (version 3.2), I am getting the following warnings:
    "Warning: The requested schema already exists. Warning: The requested schema is already assigned to one or more workspaces. Please ensure that giving multiple workspaces access to the same schema is permitted by the security policies at your site before approving this request."
    How do I "ensure that giving multiple workspaces access to the same schema is permitted"?
    What are the advantages/disadvantages of doing so?
    Thanks,
    Gabor

    The correct answer to it would have been: I use manual provisioning.I didn't ask a detailed enough question. What I am wondering is how you are set up to to workspace provisioning at your site. In apex_admin, if you navigate to Home>Manage Service>Instance Settings there is a radio group like:
    Provisioning Status:      
    0 Manual - An administrator manually creates each workspace
    0 Request - Link displayed on login page enabling users to request workspaces
    0 Email Verification - Workspace created after email address is verified by the user
    The help text for this is:
    Provisioning Status:      
    Determines how the process of provisioning (or creating) a workspace works for your development instance. Options include:
        * Manual - An Application Express administrator manually creates new workspaces and notifies the Workspace administrator of the login information.
        * Request - Users request workspaces directly in a self-service fashion. Selecting this option displays a link on the Login page enabling users to request a workspace. When a user requests a workspace, each request is submitted to a queue for approval.
        * Email Verification - Works similar to Request except each user receives an initial email containing a link. Clicking this link validates the user's email address before the request is processed.
    Note: To enable users to request a workspace using a link on the Login page, you must choose Request or Email Verification. If you select Manual, no link appears on the login page.How is yours set up?
    As to the first original question (How do I "ensure that giving multiple workspaces access to the same schema is permitted"?), I still do not know.Whether it is permitted or not is a decision made by the apex site administrator who approves/declines workspace requests. Whether it ought to be permitted is a different question and is really same as your second question which involves issues you said you are now starting to understand better. So I think we've covered your original questions. If not, please elaborate.
    As to the last subject (How did the hidden workspace get created and how do I get rid of id? What happens if I don't?), this happened at work, so I can only tell you more on Monday (luckily...). Until then, here is what I remember. The work space was created, which is proven by the fact that when I want to create a new workspace with the same name, I am getting an error, which says that a workspace with that name already exists. However, I cannot delete the workspace, since it show up nowhere.No hidden workspace got created. I'm pretty sure the request is just in the queue waiting to be approved/declined. In the meantime a workspace with the same name cannot be requested.
    By the way, how do you quote some text here? I just put a '>' in the first character position before the text to quote. You can also use the " rich text icon above the text pane.
    Scott

Maybe you are looking for