Multiple sounds volume (help plz)

I have read tuorials about how to put sounds into flash, and
I need two sounds in my document. I need one to be softer (like
backround music) and the other louder). I don't need something to
control it in the document, they just need to be preset and stay
that way. Thx for any help.

i got two sound in two different layers, but I am confused
about changing the volume in the properties. I went to the
properties of the movie, and the sound clip (through the library)
and no volume option was there. Thanks for your help.
I found this to create sounds on a turorial:
smoothaudio = new Sound();
smoothaudio.setVolume(25);
Only problem is, it only works for one sound. When I put this
code is the other sound (changing the variable name, of course,
both sounds only listen to the first one. Is there a way to adapt
this code in any way? Thanks for any help.
-Eric

Similar Messages

Hi,I have 4s,I have a problem since 2days that the ring tone,lock sound,password sound,volume button and slide,calls flash,all sometimes working and sometimes not,plz help me to solve this problem.thanks

HI
i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
plz help me to solve this problem

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Help with multiple sound buttons?

Is there any way I can have multiple sound buttons that works as stop buttons for each other?
I mean.. I now got 3 buttons that start 3 different songs, but they overlap each other when I press more than one. I'd like Song 1 to stop when I press Song 2 or 3. And vice versa
I'm trying to make learning tools for autistic kids so helping me is helping them . I'd really appreciate it. Thanks

Thanks! Is there any way to do it without using actionscript?
The sounds are simply connected to the buttons through Properties

My volume and sleep buttons doesnt work..help plz?

my volume and sleep buttons doesnt work..help plz?

Well have you tried connected to iTunes?? If that doesn't work call your local Apple Store and make an appointment at The Genius bar and they can either fix it or replace it but it will cost you money.

Multiple sound devices mayhem (wiki not helping)

In my computer, there are 3 things wanting to pretend to be sound devices:
*) The motherboard (HDA Intel PCH ALC892)
*) The USB webcam, logitec quickcam 9000 Pro --> Microphone only, yet this thing manages to confuse Linux into thinking it's a soundcard, thereby disabling all sound
*) The nvidia graphics card. Don't ask me how a graphics card can make sound, but does a hdmi port maybe have the ability to make sound or so??
Anyway, while using Skype, sometimes microphone works, sometimes it doesn't. I want my own microphone (plugged into the motherboard on the rear side) as mic, NOT the webcam, and definitely not the graphics card. Sometimes, the microphone is device 0,0, sometimes it's 1,0, and sometimes it's called "default".
Also, whenever booting into KDE, it gives some window about "forgetting" sound devices it detected last time.
Every boot, they're all there, but I think they sometimes swap positions or names.
I actually want ONLY the motherboard as sound device, and want Linux to treat the webcam as video only, and the graphics card as graphics only. And I want it to stabilize, so that I make it work in alsamixer, xmms and skype ONCE, and then it remains working forever without randomly changing.
Any ideas what I can do here? Thanks!
The wiki (https://wiki.archlinux.org/index.php/Ad … chitecture) isn't helping, it's asking to edit a file /etc/modprobe.d/alsa.conf that doesn't exist and isn't very clear about what format the name of the sound device to give should be, and the alsaconf they mention in the wiki is now disabled in arch...
EDIT: Here's the output of some commands from the wiki:
$lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 24121 4
snd_hda_codec_realtek 195514 1
snd_usb_audio 93493 5
snd_hda_intel 23375 5
snd_usbmidi_lib 18936 1 snd_usb_audio
snd_hda_codec 89160 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
snd_rawmidi 19458 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_hwdep 6389 2 snd_hda_codec,snd_usb_audio
snd_pcm 74780 5 snd_hda_codec,snd_hda_intel,snd_usb_audio,snd_hda_codec_hdmi
snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
snd 59214 30 snd_timer,snd_pcm,snd_hwdep,snd_seq_device,snd_hda_codec,snd_rawmidi,snd_usbmidi_lib,snd_hda_intel,snd_usb_audio,snd_hda_codec_realtek,snd_hda_codec_hdmi
$ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Mar 4 21:11 by-id
drwxr-xr-x 2 root root 100 Mar 4 21:11 by-path
crw-rw---- 1 root audio 116, 3 Mar 4 21:11 controlC0
crw-rw---- 1 root audio 116, 9 Mar 4 21:11 controlC1
crw-rw---- 1 root audio 116, 18 Mar 4 21:11 controlC2
crw-rw---- 1 root audio 116, 8 Mar 4 21:11 hwC1D0
crw-rw---- 1 root audio 116, 17 Mar 4 21:11 hwC2D0
crw-rw---- 1 root audio 116, 16 Mar 4 21:11 hwC2D1
crw-rw---- 1 root audio 116, 15 Mar 4 21:11 hwC2D2
crw-rw---- 1 root audio 116, 14 Mar 4 21:11 hwC2D3
crw-rw---- 1 root audio 116, 2 Mar 4 21:36 pcmC0D0c
crw-rw---- 1 root audio 116, 7 Mar 4 21:36 pcmC1D0c
crw-rw---- 1 root audio 116, 6 Mar 4 21:46 pcmC1D0p
crw-rw---- 1 root audio 116, 5 Mar 4 21:36 pcmC1D1p
crw-rw---- 1 root audio 116, 4 Mar 4 21:36 pcmC1D2c
crw-rw---- 1 root audio 116, 13 Mar 4 21:11 pcmC2D3p
crw-rw---- 1 root audio 116, 12 Mar 4 21:11 pcmC2D7p
crw-rw---- 1 root audio 116, 11 Mar 4 21:11 pcmC2D8p
crw-rw---- 1 root audio 116, 10 Mar 4 21:11 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Mar 4 21:11 seq
crw-rw---- 1 root audio 116, 33 Mar 4 21:11 timer
Last edited by aardwolf (2012-03-04 21:07:53)

You can also give your different sound devices fixed indices (fixed order). If not exists, create a file /etc/modprobe.d/alsa.conf or /etc/modprobe.d/sound.conf or whatever .conf and define the order of sound slots:
#/etc/modprobe.d/alsa.conf
options snd slots=snd-hda-intel,snd-usb-audio,...
First slot: card 0, second slot: card 1, ...
There is another handy option to give your devices neat custom names like
#/etc/modprobe.d/alsa.conf
options snd slots=snd-hda-intel,snd-usb-audio,...
options snd-hda-intel id="onboard"
options snd-usb-audio id="logitec"
Hope this helps!
Edit: more about multiple sound devices here at the alsa wiki.
Last edited by masutu (2012-03-05 22:11:44)

HT1849 hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can you help me to fix the problem ?

hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can someone help me to fix the problem ?

Hello Kishore1022,
It sounds like you have a new album downloaded and the tracks all have a very low volume. I recommend checking to see if Sound Check is enabled in the Music settings.
iPad User Guide
http://help.apple.com/ipad/7/#/iPad99f37037
Go to Settings > Music to set options for Music, including:
Sound Check (to normalize the volume level of your audio content)
You can also try downloading the purchases onto a computer, with either of these articles depending on your version of the operating system:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Or
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
Thank you for using Apple Support Communities.
Cheers,
Sterling
Thank you for using Apple Support Communities.
All the best,
Sterling

Unix layout question single vs. multiple logical volumes

Hello friends,
I have a question which I have seen various points of view. I'm hoping you might be able to give me a better insight so I can either confirm my own sanity, or accept a new paradigm shift in laying out the file system for best performance.
Here are the givens:
Unix systems (AIX, HP-UX, Solaris, and/or Linux).
Hardware RAID system on large SAN (in this case, RAID-05 striped over more than 100 physical disks).
(We are using AIX 6.1 with CIO turned on for the database files).
Each Physical Volume is literally striped over at least physical 100 disks (spindles).
Each Logical Volume is also striped over at least 100 spindles (all the same spindles for each lvol).
Oracle software binaries are on their own separate physical volume.
Oracle backups, exports, flash-back-query, etc., are on their own separate physical volume.
Oracle database files, including all tablespaces, redo logs, undo ts, temp ts, and control files are in their own separate physical volume (that is made up of logical volumes that are each striped over at least 100 physical disks (spindles).
The question is if it makes any sense (and WHY) to break up the physical volume that is used for the Oracle database files themselves, into multiple logical volumes? At what point does it make sense to create individual logical volumes for each datafile, or type, or put them all in a single logical volume?
Does this do anything at all for performance? If the volumes are logical, then what difference would it to put them into individual logical volumes that are striped across the same one-hundred (+) disks?
Basically ALL database files are in a single physical volume (LUN), but does it help (and WHY) to break up the physical volume into several logical volumes for placing each of the individual data files (e.g., separating system ts, from sysaux, from temp, from undo, from data, from indexes, etc.) if the physical volume is created on a RAID-5 (or RAID-10) disk array on a SAN that literally spans across hundreds of high-speed disks?
If this does makes sense, why?
From a physical standpoint, there are only 4 hardware paths for each LUN, so what difference does it make to create multiple 'logical' volumes for each datafile, or for separating types of data files?
From an I/O standpoint, the multi-threading of the operating system should only be able to use the number of pathways that are capable based on the various operating system options (e.g., multicore CPUs using SMT (simultaneous multipath threading). But I believe they are still based on physical paths, not based on logical volumes.
I look forward to hearing back from you.
Thanks.
ji li

Thanks for your reply damorgan.
We have dual HBAs in our servers as standard equipment, along with dual controllers.
I totally agree with the idea of getting rid of RAID-5, but that is not my choice.
We have a very large (massive) data center and the decision to use RAID-5 was at the discretion of our unix team some time ago. Their idea is one-size-fits-all. When I questioned it, I was balked at. After all, what do I know? I've only been a sys admin for 10 years (but on HP-UX and Solaris, not on AIX), and I've only been an Oracle DBA for nearly 20 years.
For whatever it is worth, they also mirror their RAID-5, so in essence, it is a RAID 5-1-0 (RAID-50).
Anyway, as for the hardware paths, from my understanding, there are only 4 physical hardware paths going from the servers to the switches, to the SAN and back. Their claim (the unix team's) is that by using multiple logical volumes within a single physical volume, that it increases the number of 'threads' to pull data from the stripe. This is the part I don't understand and may be specific to AIX.
So if each logical volume is a stripe within a physical volume, and each physical volume is striped across more than one hundred disks, I still don't understand how multiple logical volumes can increase I/O through-put. From my understanding, if we only have four paths, and there are 100+ spindles, even if it did increase I/O somehow by the way AIX uses multipathing (SMT) with its CPUs, how can it have any affect on the I/O. And if it did, it would still have to be negligible.
Two years ago, I've personally set up three LUNs on a pair of Sun V480s (RAC'd) connected to a Sun Storage 3510 SAN. One LUN for Oracle binaries, one for database datafiles, and one for backups and archivelogs), and then put all my datafiles in a single logical volume on one LUN, and had fantastic performance for a very intense database that literally had 12,000 to 16,000 simultaneous active* connections using Webshere connection pools. While that was a Sun system, and now I'm dealing with an AIX P6 570 system, I can't imagine the concepts being that much different, especially when the servers are basically comparable.
Any comments or feedback appreciated.
ji li
Edited by: ji li on Jan 28, 2013 7:51 AM

HELP, Plz- Yahoo vs Outlook -how can I get pdf docs to email thru Yahoo?

When I scan document into computer thru adobe (whatever version they just automatically loaded), I have two problems
1) I can only get them to be emailed thru Outlook which I don't have and can't seem to cut & paste into Yahoo ... any suggestions, even in how I'm trying to do this. Scanner is from 3-in-1 HP 8500A (if that helps) I at least got most of the printer's capabilities to work on my own.
2) When I use Tool and convert pdf to some type of Word doc (doc/docx) - and then click on 'save' - I have no idea where they've been stored; I don't think I get any kind of choice.
Anyone want to be a 'good-guys' attorneys advisor on little things -- good karma? I work pro bono w/no staff help - even clean the office myself. And despite, from the above clear indication of my astute comprehension of all things 'tech', I sometimes have what are probably simple (what a great secretary would already know --secretaries/legal assistants really run the show while the lawyer (or office cleaner) can just sound good. PLZ just some help w/above questions... ?

Not sure how this used to work on your iPod Touch since there is no setting for an email account preferences to not save sent messages. With an IMAP account, there is an option to store sent messages on the server, or locally on the iPhone. There is no do not save sent messages setting, and the same for the email account preferences with a POP account.

Multiple sounds in one button

would you kindly give me a suggestion that how to make multiple sounds in a button of a windows form application. actually, being a newb i'm trying to develop a piano application by C# for my own interest. the problem is, when i press one button it plays
too long & i had to wait until the wav file is finished & after that i had to press another button. what's the code for playing multiple sounds together in one button? u know, then i can play chords too. would you kindly explain or give a code?

Hi Rinku,
This is an example for you:
A Piano Key Control in C#
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Inadequate sound volume on MacBook

I may be expecting too much from my MacBook, but I'd like to be able to enjoy the music in my iTunes library without having to sit directly in front of it. I go to Apple button>System Preferences>Sound where I set the sound level for maximum, but that doesn't help as much as I would like. Is there another way to increase the sound volume? By the way, I had no such problem with my iMac, which I'm missing more and more.

A similar trick is in iTunes, Show Equalizer, click
pre-amp on and move the slider to max.
Though I would basically agree with JSwerdy's post
above. I do not find it necessary to use the
equalizer setting, and I find it necessary to
sometimes turn down the volume on occasional web
pages that play sound. I don't want high volume, low
quality sound. If I want to listen to music for long
periods, I use headphones or stream wirelessly to my
stereo, and there's no lack of signal quality at all
then. I did have the benefit of hands-on comparison
at an Apple Store before purchasing, and the speaker
sound volume/quality was an obvious difference
between the MacBook and MacBook Pro. Unless there are
significant differences among individual MacBooks....
This is the first time that I've ever heard that there's a difference in the sound quality of a MacBook and a MacBook Pro. The salesmen said the main difference was the graphic stuff. They didn't even hint at a sound difference.

HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

Change the sound volume increment?

Is there a way to change how much the Apple remote and keyboard increments/decrements the system sound volume?
Let me explain... I have the Bose Companion 5 sound system. It comes with a little desktop controller to adjust and mute the volume. The desktop volume controller is nice and all, but it's completely independent from the Mac OS volume controls. I could crank the Bose control all the way up, but doing so makes it such that even the lowest Mac OS volume setting is still louder than I'd like (easily audible through the walls), and quiet white noise is heard even if the Mac is muted. Setting the Bose volume to something in the middle or lower limits my volume flexibility when listening to music and I come across that occasional song that I want cranked louder. I know I'm whining, but hear me out.
I recently bought a new desk and made an interesting discovery while setting everything back up. Somehow I had forgotten to connect the Bose volume controller. When I grabbed the Apple remote to adjust the system volume, it seemed to directly adjust the volume on the Bose system (this setup can get VERY loud this way), and no white noise when the Mac is muted. I love the idea of leaving it like this, but even the first notch above mute (via keyboard or remote) is pretty loud. Finite control is possible from the volume preferences panel, but who wants to open that every time to change the volume?

I don't know if these two AppleScripts will help you or not but give them a try.
Place them in your Applications folder or your AppleScript folder (within your Applications folder), then drag them into your Dock.
They are background scripts so you will not see them launch in the Finder.
Have iTunes playing or some other app playing when you test them.
Download: <http://tomx.890m.com/VUpDown.dmg>
Tom

Itunes help plz respond asap

ok so when i try to play my songs on itunes no matter where it was downloaded from (itunes or another source) it wont play. it will act like it was going to play and then freeze at 00:00. i tried re-installing it and deleting my itunes library and putting it back on but nothing has worked. my sound is fine because it makes that noise when i turn on the computer and such. help plz.

You can get iTunes here: http://www.apple.com/itunes/
You will also need the iPod Updater:http://www.apple.com/ipod/download/

The text/email/alerts sound volume has gone right down on my iPhone 4

The text/email/alerts sound volume has gone right down on my iPhone 4, but the ringtone volume is still loud! Adjusting the volume in "Settings" only changes the ringer volume, I just can't find a way to increase the alerts volume! Help please!!!

Hi ecsands,
Thanks for visiting Apple Support Communities.
To "Choose alert sounds, adjust the alert volume, or turn vibrate on or off: Go to Settings > Sounds."
For more information, see Pg. 28 - 29 of the iPhone User Guide:
http://support.apple.com/manuals/#iphone
If adjusting the volume doesn't help, see the "Acoustic-speaker/microphone/receiver" section of this article for some troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jeremy

Flash Player playing multiple sound feeds at once...even when browser is closed

I recently updated my Flash Player to 11.3 (most recent version). When I go to a site which utilizes Flash (e.g. YouTube), I will start the video, and then about 10 seconds later, I get multiple sound feeds at the same time. They all sound like commercials, or tv channels. Even when I close my browser, the sound continues. When I open my sound mixer, there is a "program" listed of "winrscmde" which is playing the various audio channels all at once. When I go into the task manager, "winrscmde" shows as a svchost.exe *32. When I stop that service the sound stops. It will start again when i access a flash site. When I uninstall Flash Player 11.3, this stops.
I'm running Windows 7 - 64 bit with latest updates. IE 9.0.8112.16421
Any help would be appreciated.

Well, I think I fixed the problem.
I found this topic:
http://www.bleepingcomputer.com/forums/topic442928.html
About the second post down, the poster recommends downloading TDS killer as winrscmde.exe is disquised as svchhost.exe in the \windows\system32 folder (you have to click on "Properties", then "Details" tab and check the original filename...if it's bogus, it'll say winrscmde.exe as the original name).
I also ran the aswMBR program as well as FixTDSS (http://www.symantec.com/content/en/us/global/removal_tool/threat_writeups/FixTDSS.exe).
That seemed to fix the issue. Just reinstalled Flash and don't get the same issues. The svchost.exe in the \windows\system32 folder is legit!
Hope that helps anyone else with the same problem.

Multiple sounds volume (help plz)

Similar Messages

Maybe you are looking for