Multiple web service calls - Split message,1 WS call for each message

Friends,
We have designed a BPM which will pick the files, make web service call and merge these message structures and map them to the target.
We have to modify this design as follows,
We have to split the message based on purchase order number, meaning one message for each order number and then we need to make a web service call for each of them,after we get all the responses we will merge the files using transformation. (merging files and transformation is already taken care, its the web service part which iam looking for)
Thanks in advance for all your help/ideas.

Friends,
Can you please help me out with this logic? Thanks!

Similar Messages

Multiple Web Services in one Jdeveloper project

Hi all,
I'm currently trying to implement a series of web services, all relating to one application. I'm using the top-down approach, where I generate the web service from a WSDL file, and add my implementation to the generated classes. The WSDL file imports all sorts of XML Schemas (xsd-files) and Jdeveloper correctly generates all the necessary java-classes for me. Lets call the first web service I create WS-1.
This all works fine and I'm a happy panda. I can call the web service, it works, I can modif the wsdl and regenerate the web service to e.g. change the input etc. All this works.
Just until the point where I want to create a second web service (lets call this WS-2). This new web service doesn't use all the XML Schemas that the first web service does, it is more simple with regards to in-/output. The problem arises when I modify WS-2 and Jdeveloper regenerates the Web service files (.java and the files in the WEB-INF/wsdl-directory). When I do this, it deletes the imported xsd-files that WS-1 uses (removes them from WEB-INF/wsdl).
And when I regenerate WS-1 to get my xsd-files in again, then when I regenerate WS-2 it imports all the unnecessary xsd-files into the wsdl for WS-2.
Something tells me, that there is a connection or shared library between all web services in one Jdeveloper project. That they all imports and uses the xsd-files in WEB-INF/wsdl.
Is this true? Can't I have multiple web services (and wsdl-files) using different types (schema definitions) in the the same Jdeveloper project?
One solution I can think of, is to have all my web services in different projects under the same application. But is this really necessary?
I'm using Jdeveloper 10.1.3.3.0.

Hi,
pure from a coder instinct I think I would prefer them to be in separate projects for better reuse and clean separation. If I need project 1 to access aclass from Project 2, I can check the dependency check box in the project properties. Is there any business requirement that makes you think having all of these in a single project will help ?
Frank
Btw.: I agree that JDeveloper shouldn't constraint developers from doing what they want and if this is a limitation the feel free to file a bug

Certificate error while connecting to multiple web service

I am having a web service test client through which I can connects and get reports from multiple web services.
In Development unix box, we are using "self-signed certificate" using keystore type JKS. In Production server, we are using certificate from CA.
The web service is running in Development and in Production.
Now I have developed single test client with a drop down selection for different web services. For example, if we select "Development", the request will go the development web service and if we select "Production", the request will go to Production web service.
Now while connecting to Develpment service, we are settings the below certificates details Because we are using the self signed certificate.
System.setProperty("javax.net.ssl.keyStore",keyStoreFileLocation);
System.setProperty("javax.net.ssl.keyStorePassword",keyStorePassword);
System.setProperty("javax.net.ssl.keyStoreType", keyStoreType);
System.setProperty("javax.net.ssl.trustStoreType",trustStoreType);
System.setProperty("javax.net.ssl.trustStore",trustStoreFileLocation);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
I am clearing the System properties using the System.clearProperty() while pointing to Production service. because in Production we are using the CA certificate from Thawte so these details are not required at all and our JRE (java 5) is pre configured to support that CA certificate.
I am using Resin-2.1.12, axis1.2 and java5.
Now the problem is
(1) for the first time, when I send the request to Production Service URL, the report gets generated. For the next time when we are running against Development, it's giving below certificate error.
sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
(2) Now restart resin and run the test client against Developemnt service URL, here report gets generated and for the next time, run the test client against Production, it's giving the certificate error.
So for the 2nd request, it always gives the error irrespective of the web service instance selected.
Please suggest ....thanks in advance.

Hi ,
No, due to the issue is happening only on one computer.
The error "(401) Unauthorized" usually indicates that the connection has been established but the permission check fails. InfoPath Form Services uses the application pool identity of the web
application to connect to resources.
Does the account which login the computer have permission to connect to User Profile Service Application?
For a workaround, you can go to IIS Manager , set the User Profile Application Pool to Anonymous Access and try again.
Also you can have a look at the blog:
http://sharepointconnoisseur.blogspot.in/2011/04/how-to-resolve-401-unauthorized-error.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

OWSM and Webservices -Define policies once for multiple web services

I thought that through using OWSM we had the possibility to use the same Policy Lines for multiple web services.
Mostly when web services are used/integrated within an application, the same rules need to be defined and I thought this requirement could be met when using OWSM.
But you need to define the policy requirements on each web service that's passing through a gateway or agent, why isn't it supported to define policy lines one level higher to be able to use the same requirements for multiple web services?

Nathalie,
For this purpose OWSM allows you to use Template Policy Pipelines.
For individual services, you can than replace the pipeline with the Template.
But I have to agree with you here: the templating functions are rough on the edges, e.g. limited editing capabilities.
Hope this helps.
Best regards, Sjoerd

Regarding multiple web service

Hi,
I am working on web services in EJB.
for securing the web service, we use jboss-wsse security.
Can i have multiple web services with few web services being secured and the others in-secured?
Thanks in advance.

Friends,
Can you please help me out with this logic? Thanks!

Can't have multiple Web Service connections in SP1

Hello,
I'm currently interested in adding more than 1 Web Service connection to a particular xcelsius file, but after adding the first connection, the option is disabled in the Data Manager screen. Is there a workaround for this, since before service pack 1 you could have any amount of connections and as off upgrading this was changed.
Regards

Yeah I totally agree, It's like someone giving you a bunch of new appliances for your home but then telling you that your not going to have any electricity. This product is pretty much usless to me now.
Just the thought of having to partially develop in one version of xcelsius and then port over to a version that has SP1 installed makes me ill. From what I can tell Xcelsius Engage Server still has multiple web service connection functionality enabled (http://www.businessobjects.com/product/catalog/xcelsius_engage/comparison.asp), I'm interested to see what the cost will be to upgrade to Server.

Is it possible to define multiple web services in one project?

I'd like to publish multiple components within one project as web services. but when I try to create it using the project New menu, it only prompts me and allows me to select one component . So does this mean only one web service can exist in one project?

Sunil
Thanks for the prompt reply.
I think I should have worded my question more clearly.
I have a project with multiple Java classes. I'd like to convert two of them into web services.
There are two ways to co this.
1. I right click on each class and select the Generate J2EE Web Service option. This will work correctly and allow multiple web services to be generated.
but this is not what I want to do .
What we are trying to do is to generate web services at the project level. I am following instructions in OTN web services tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
So , this is what I do :
1. Right-click on my project and select New from the context menu.
2. In the New Gallery, expand Business Tier in the Categories list and select Web Services, then select Java Web Service from the Items list. Click OK.
3. In the Select J2EE Web Service Version dialog, select J2EE 1.4 (JAX-RPC) Web Service, then click OK.
4. Click past the welcome page
5. This brings me to the page where I can select the web service and class.
This is where I am stuck - it seems I can only select one web service here . Unless I am missing something.
Or should I just repeat the process multiple times - running the wizard once for each class ?
Thanks for the help.

Multiple web services sharing same session?

I was wondering if anyone has ever implemented multiple web services for an application that allowed the web services to share the same session?
Furthermore, I was wondering if support might be included/buried in the WSDL spec. somewhere?

There are a number of standards emerging to support long-running conversations among Web services as well as Web service composition. Can you expand on what you're trying to achieve?
Doron.
Collaxa, Inc.

Invoke multiple web services in single client

hi everyone,
Can we invoke multiple web services in a single client?.
--web service

We can invoke..any number of services in a client.

Im am trying to set up my printer for web services and it is asking me for a proxy address

im am trying to set up my printer for web services and it is asking me for a proxy address

Have you downloaded and installed an App Store app that you downloaded free from some website instead of from the App Store? If so, that's a stolen app, and you need to delete it.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Adapter Status Error : Error in creating message ID map for JMS message:

Currently in the SAP XI 3.0 JMS Adapter, I am receiving the following error
Error in creating message ID map for JMS message:
ie. Error while processing message 'de8265f6-c864-4479-1137-9bab17b78b3b'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in creating message ID map for JMS message: ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:103)
Although I am receivng this error, when I check the details of the message processing, all steps are successful and the message is set to status : DLVD
Audit Log for Message: de8265f6-c864-4479-1137-9bab17b78b3b
Time Stamp     Status     Description
09.06.2009 13:27:24     Success     New JMS message with JMS message ID ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 received. The XI message ID for this message is de8265f6-c864-4479-1137-9bab17b78b3b
09.06.2009 13:27:24     Success     JMS message converted to XI message format successfully
09.06.2009 13:27:24     Success     RRB: entering RequestResponseBean
09.06.2009 13:27:24     Success     RRB: suspending the transaction
09.06.2009 13:27:24     Success     RRB: passing through ...
09.06.2009 13:27:24     Success     RRB: leaving RequestResponseBean
09.06.2009 13:27:24     Success     Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
09.06.2009 13:27:24     Success     Transform: transforming the payload ...
09.06.2009 13:27:24     Success     Transform: successfully transformed
09.06.2009 13:27:24     Success     Application attempting to send an XI message synchronously using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:24     Success     Trying to put the message into the call queue.
09.06.2009 13:27:24     Success     Message successfully put into the queue.
09.06.2009 13:27:24     Success     The message was successfully retrieved from the call queue.
09.06.2009 13:27:24     Success     The message status set to DLNG.
09.06.2009 13:27:25     Success     The application sent the message synchronously using connection JMS_http://sap.com/xi/XI/System. Returning to application.
09.06.2009 13:27:25     Success     The message was successfully transmitted to endpoint http://sapxia.swets.nl:8000/sap/xi/engine?type=entry using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:25     Success     The message status set to DLVD.
Not sure why this is occurring.......

No, not using correlation id.
I was able to resolve the issue on this queue by changing the following setting
Under the PROCESSING tab, under XI SETTINGS
Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
I have changed this to 300 seconds and the adapter has now gone green.
BUT......
That said, I have the exact scenario on another sender JMS channel set to 300 seconds and it exhibits the same issue.
correlation settings:
Set XI message id to = GUID
Set Xi conversation

Message settings option for text messages is not c...

I am using N73 phone and here i cant go to the message settings option for text messages. actually i want to change my message center.
Message > Options > Settings > Text Message
When i tried to follow above steps it finally ends up with the Main menu. But previously it works fine. I want to know there whether there is another way to set it or i need to go for a phone software installation.
Thanks.

The settings can also the sent directly to your phone as an auto install sms from your network. Contact your network and request they send you the sms.

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

Using static variable in orchestration for each message

Once a file is dropped to our Biztalk server I am capturing data from each message. However, I need to assign a batchID for this file that I will write to the database along with the data. How do I build my orchestration so that the code I'm using to generate
the BatchID doesn't create a new ID for each message? I want each message to use the same ID.
Thanks.
Raymond

Shankycheil,
I think you've pointed out my primary issue. I'm fairly new to Biztalk and I just kind of let it do its thing when it comes to EDI processing. So, I guess my issue is due to the fact that I'm letting the EDI Disassembler debatch the file and pass messages
into the orch one at a time. I have code in an expression shape that generates a BatchID, but of course if I'm debatching it creates a new BatchID for each message. How do I deal with the file as a whole inside the orchestration so that once I generate a BatchID
it uses it for all of the messages in file? I've done what Prabhdeep suggested and promoted a field in the schema so that I can set the BatchID, but it needs to be the same for each message in a file.
Thanks.
Raymond

Message retry count for the message has been exhausted

Hi,
I am using 'Custom Document Over Internet' with HTTPS as transport protocol. I have set the acknowledgement mode to Sync in order to receive the synchronous response. B2B is able to post the HTTP request successfully and in turn it receives a synchronous response and a MDN message. At the initial stage, after posting the request it shows the state as 'WaitForAck' for request message and for response and MDN messages, the state is completed.
After some time when we check the state of request it is changed to 'Error' with the error message as 'Message retry count for the message has been exhausted'. We have not set the retry count and retry interval and so after retrying for 3 times with an interval of 120 minutes it is showing error state as it is not able to correlate the incoming response to the corresspoding request. We have tried the option of setting the Message id of the request in 'replyToMsgID' parameter of response header and tested the flow. But still I am facing te same issue. Please help me to resolve this issue.

Hi Anuj,
The property mentioned by NandaGopal has already been added in tip.properties file. I sent the B2B logs in debug mode and tip.properties file to your mail id. Please have a look into that. The result of opatch lsinventory command is
Result:
Installed Patch List:
=====================
1) Patch 9234704 applied on Fri Jan 15 16:41:12 GMT 2010
[ Bug fixes: 8870866 9143036 ]
[ This patch overlays patches " 8703410 " ]
[ This patch needs patches " 8703410 " as prerequisites ]
2) Patch 8703410 applied on Thu Jan 07 17:56:08 GMT 2010
Unique Patch ID: 11901808
[ Bug fixes: 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022 ]
3) Patch 4601861 applied on Fri Nov 14 04:24:08 GMT 2008
[ Bug fixes: 4601861 ]

Multiple web service calls - Split message,1 WS call for each message

Similar Messages

Maybe you are looking for