How to select columns from internal table using 'GUI_DOWNLOAD' ?

Hi,
i am running a report & the fields for output is saved in an internal table which has as many as 10 fields. But I want to select only a few fields for output. There is a option COL_SELECT in function 'GUI_DOWNLOAD'. How to use it. If possible with example.

Hai VijayKumar
Try with the following code
tables : mara.
data : begin of it_mara occurs 0,
 matnr like mara-matnr,
 mbrsh like mara-mbrsh,
 mtart like mara-mtart,
 meins like mara-meins,
 end of it_mara.
parameters : P_mtart like mara-mtart default 'ROH'.
start-of-selection.
perform select_data.
perform download_data.
*& Form select_data
 text
--> p1 text
<-- p2 text
FORM select_data .
select
 matnr
 mbrsh
 mtart
 meins
 from mara into table it_mara
 where mtart = p_mtart.
ENDFORM. " select_data
*& Form download_data
 text
--> p1 text
<-- p2 text
FORM download_data .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 FILENAME = 'c:\down.txt'
 FILETYPE = 'ASC'
 COL_SELECT = 'X'
 COL_SELECT_MASK = 'X XX'
TABLES
 DATA_TAB = it_mara.
IF SY-SUBRC = 0.
 SORT IT_MARA BY MATNR.
ENDIF.
ENDFORM. " download_data
Thanks & Regards
Sreenivasulu P

Similar Messages

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '99991231'.
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu <= '99991231'.
Thanks,
Vinay
Thanks,
Vinay

How to Select Data from different Tables Using Linq

Hi,
I have two different tables, I just want to collect data from tables using Linq to SQL Queries.
The tables looks like This
ID Name ImageUrl
Other Table is
ID EmpID CheckInTime CheckOutTime
What I want to Collect data from CheckInTime and want to place it in a that is in a list view
Same thing I want to do it for CheckOutTime And One thing I want to tell is both tables are joined by a FK EmpID with ID.
What Are the suggestions for me
I have Used this code
var data = from emp in db.Employees
join chk in db.CheckInCheckOuts on emp.ID equals chk.EmpID
select new EmployeeCheckInOut
Name = emp.Name,
ImageUrl = emp.ImageUrl,
CheckIn = emp.CheckInCheckOuts,
CheckOut = emp.CheckInCheckOuts
Here the CheckInCheckOuts is another table, I don't how do I access fields of the Other table "CheckInCheckOuts"
Thank you
Ali

Mitja,
Kind of Tables, I don't Know but I can Tell you that these are Two table, first Table Have Data in It, Name, ImageUrl I have filled this table with names and ImageUrls And are string type.Other Table is for the CheckInTime And CheckOutTime of the employee.
What I need that when I click on the Image button it Should displays The Current Datetime into the label below the Image button.
So I have Problem accessing my CheckInCheckOut Table because I may not have Idea about.Did you understand what I need to do, if you have more question please ask to me.
Thanks
Ali

How can I select columns from a table EMP, using Select statement?.

Hi Friends,
How can I select columns from a table EMP?.
I want to select columns of EMP table, using select statement.
Please reply me urgently.
Shahzad

Something like this:
scott@DBA> select empno,ename,job from emp;
     EMPNO ENAME      JOB
      7369 SMITH      CLERK
      7499 ALLEN      SALESMAN
      7521 WARD       SALESMAN
      7566 JONES      MANAGER
      7654 MARTIN     SALESMAN
      7698 BLAKE      MANAGER
      7782 CLARK      MANAGER
      7788 SCOTT      ANALYST
      7839 KING       PRESIDENT
      7844 TURNER     SALESMAN
      7876 ADAMS      CLERK
      7900 JAMES      CLERK
      7902 FORD       ANALYST
      7934 MILLER     CLERK
14 rows selected.Check the documentation:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#sthref9697
Message was edited by:
Delfino Nunez

How to select columns in a table by their column id and not the column name

Hello,
How do you select columns from a table based on their column_id.
I have create a view
but other than Select * , i cant now select one just one column from it
the view as follow:
create view count_student as
select a.acode "acode",aname "Activity Name",count(ae.acode) "Number of student joined"
from aenrol ae, activity a
where a.acode= ae.acode
group by a.acode,aname;

The issue is that you have decided to use quoted column names. A pretty horrible idea (mostly for the reasons that you are now finding).
Re-create the view and get rid of the silly double quotes.

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

How to select data from cluster table

hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
mani

Hi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards.

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How to update Records from Internal table to u2018Zu2019 table?

Hi Friends,
How to update Records from Internal table to u2018Zu2019 table.
I have records in Internal table , that records want to update on u2018Zmarau2019 Table.
( my internal table & u2018 Zu2019 table structures are same.)
Thanking you.
Regards,
Subash

Hi,
loop at internal table.
modify <Z- table > from values < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
endloop.
or
UPDATE <Z- table > from table < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
Prabhudas

Selecting columns from two table is slow but same

I am selecting 27 columns from two tables
which running for more than 30 minutes. but
if I select count(*) with the same query
except the columns it is coming in seconds.
Where is the error?

If you post
1) The table definitions for the underlying tables
2) The indexes that are on the tables
3) The two SQL statements you're running
4) The explain plan for both statements
we can probably be of some assistance.
My guess is that the count(*) is able to return much more quickly because the optimizer is able to use a significantly faster query plan that is based on an index which the longer-running query cannot utilize. Without the information I've requested, though, it's hard to do more than speculate.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Delete row from internal table using field symbol.

Hi friends,
I created dynamic internal table using field symbol. I want to delete some data using where clause.
for example. i want to use like,
DELETE <FS> WHERE KUNNR = WA_KNA1-KUNNR.
Like the above statment it won't work. How i can use delete with where clause in field symbols.
Hope any one can help me.
Thanks and regards
Srikanth. S

hi Srikanth,
I think you have to LOOP through the whole internal table and check each line and decide to delete or not:
LOOP at <itab> INTO <wa>.
ASSIGN COMPONENT 'KUNNR' OF STRUCTURE <wa> TO <field>.
CHECK <field> IS ASSIGNED.
IF <field> EQ WA_KNA1-KUNNR.
DELETE ...
ENDIF.
UNASSIGN <field>.
ENDLOOP.
hope this helps
ec

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
 NO INTERVALS.
 SELECT-OPTIONS SEL1 FOR SY-DATUM.
 PARAMETERS PAR1(10).
** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY
 SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

How to export selected columns in a table using expdp of oracle10g

Hi all..
I have a table with 10 columns and i want to export only 4 columns(selected columns) data using expdp
Pl. tell me if we can do this and if yes what is the syntax.
Thanks..
Sekhar

That's not possible, you could use QUERY to specify where clause but not columns in select clause,
for example,
QUERY=employees:'"WHERE department_id > 10 AND salary > 10000"'
you could use
create table2export as select c1,c2,c3,c4 from tableof10columns;and export the temp table.

How to update multiple columns from different tables using cursor.

Hi,
i have two tables test1 and test2. i want to udpate the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.
I have a code written as follows :
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
     LOOP
          FETCH C1 INTO v_mydept1,v_mydept2;
          EXIT WHEN C1%NOTFOUND;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
     END LOOP;
     COMMIT;
END;
The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].
It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.
Can anyone help me on this ?

oops my mistake.....typo mistake...it should have been as follows --
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
Now here is the upated PL/SQL code where we are trying to update columns of different tables --
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
LOOP
FETCH C1 INTO v_mydept1,v_mydept2;
EXIT WHEN C1%NOTFOUND;
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
END LOOP;
COMMIT;
END;
Please let us know why it is not updating by using using CURRENT OF

How to select and sum internal table records

Dear Friends
I kindly ask you if we have select statement
 if s_mtart = 'z003'
 select single pvprs from ckmlcr into ckmlcr-pvprs
where poper EQ s_poper and
 kalnr = itab2-kalnr and
 bdatj = itab2-bdatj and
 curtp = itab2-curtp.
like this how can I calculate how many record it got and I want to get summation of this field(pvprs).And for all poper's must contain.
Please Let me remind you my itab is already open I didn't put any thing for this situation

it seems to be you written this SELECT in a loop. if so,
instead of pushing the values into ckmlcr-pvprs ,create an internal table
data : begin of itab,
 pvprs type ckmlcr-pvprs ,
 end of itab.
then just after that SELECT SINGLE,
select single pvprs from ckmlcr into ITAB-pvprs
where poper EQ s_poper and
kalnr = itab2-kalnr and
bdatj = itab2-bdatj and
curtp = itab2-curtp.
IF SY-SUBRC = 0.
APPEND ITAB.
here either you can use APPEND OR COLLECT.
If you use COLLECT,all the values will get summed up and final sum will be in the table ITAB-pvprs.
ENDIF.
After all loops your itab will have the totals.
DESCRIBE TABLE ITAB LINES V_LINES.
V_LINES Will have total no of lines.
Regards
srikanth

How to select columns from internal table using 'GUI_DOWNLOAD' ?

Similar Messages

Maybe you are looking for