Mutliple receivers

Hi All,
I got 2 queries.
1.Can anyone explain when to go for BPM and when to go for normal scenario(enhanced Receiver determination) in case there are multiple receivers?Please give some detailed description as I am pretty confused with this topic.
2.Also explain me the steps to configure a scenario with file as sender and 2 Idoc's at receiver end with and without condition.
Thanks in advance,
Harish.

Hi Harish,
<b>Can anyone explain when to go for BPM</b>
You use BPM process when u are having some logic is there that can't be implented stright forward say Collecting IDOC, Spliting, Sync-Async Bridge etc.
http://help.sap.com/saphelp_nw2004s/helpdata/en/de/766840bf0cbf49e10000000a1550b0/frameset.htm
<b>in case there are multiple receivers?</b>
there are two way around
1. within BPM - /people/robin.schroeder/blog/2006/11/15/using-dynamic-receiver-determination-with-sync-interface
2. without BPM - enhanced receiver determination /people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
<b>Also explain me the steps to configure a scenario with file as sender and 2 Idoc's</b>
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
Sachin
Message was edited by:
Sachin Dhingra

Similar Messages

Can we have one sender and mutliple receivers in XI processing

Hello,
I will explain a scenario where you will have one sender channel and mutliple receiver channels.
There is a sender channel along with Sender Agreement where u mention the interface name and namespace.
There are two receiver channels along with two Receiver Agreements one for each with different interface names and namespaces also.
Now the processing is like this,
Sender sends some data and depending upon the agreements the corresponding receiver receives the data.
Will the process is correct or is there any other way to run the scenario?
Thanks,
Prakash

Hi Prakash chitti,
Of course the scenario that you were telling is possible.. Take the case of file-to-multiple file scenario, where single file sends the source xml and multiple receivers gets the file.. For that you need to have
1: one sender channel
2: two receiver channel
3: one sender agreement
4: two receiver agreement
5: One interface determiniation
6: One receiver determination
at the receiver determination, goto the tab 'Configured Receivers', and specify the number of recievers; and ensure they are present at the 'Configuraton overview for Receiver Determination'..
You can even set conditions for receiver determination from the source point..
This will help you.
Thanks
Vinod V
Help me with points

Router connection problems - DISH satellite receivers or too many devices?

(Sorry about that - I thought I had broken the message up.)
I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
I have the following:
- Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
- HP desktop running Vista Home Premium
- Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
- Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
- Linksys WRE54G Wireless Range Expander, v3
My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
Within an hour my connection timed out.
Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
ping 192.168.1.1 -t
I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
Anyway, I would very much appreciate some help.
Message Edited by CKdoubleU on 10-01-2008 08:43 AM

First please break that long text into separate paragraphs. No one wants to read one long runon sentences
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Attachments (word docs and PDFs) to emails can not be opened by the receivers. Are received as .dat files or application/octet-stream

Attachments I add to emails (word doc or PDFs) can not be opened by the email receivers. Word documents attachments are received with ATT00427.dat (application/octet-stream) or .doc with (application/octet-stream). PDF attached files arrive with .pdf (application/octet-stream). My copy of my sent email has the same attachment extensions.
== This happened ==
Every time Firefox opened

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
If your problem is with Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

Custom Report Layout with mutliple child tables

I am trying to create a custom report layout (using Bi Publisher) where I have parent data (multiple jobs on a page) and several child tables for each job (JobDays and JobStops) and several child tables for JobDays (JobDayProviders, JobDayCrew). On the apex screen, I have a join on Jobs and JobDays and I am using functions to string each child row value for JobDayProviders and JobDayCrew together and putting a <br> in between so that they will format on separate lines within a cell. It works fine on the screen but when trying to print to pdf, it ignores these line breaks. I have also tried using <br></br> (saw an article that said just use HTML in bi pulisher) which puts two lines in between each value on the screen and is still ignored on the pdf.
for example:
Table hierarchy:
Jobs table
Job Stops
Job Days
Job Day Service Providers
Job Day Crew
Report Layout per job (will have mutlipe jobs to print, just printing 1 day per job):
Jobs.col1 JobStops.row1 JobDay.col1 JobDayProviders.row1 JobDayCrew.r1
JobStops.row2 JobDayProviders.row2 JobDayCrew.r2
JobDayProviders.row3
Thanks,
Linda
First, is there a way to get bi publisher to recognize the line breaks? If not, what is the best way to create a custom report for this scenario? I tried to create a report query with mutliple queries, but cannot determine how to link the child queries to the paren query. I have seen an example where a button is pressed to print one parent row and the id of that row is saved and referenced as a parameter in each of the queries, but if printing mutliple parents on a report, how would I link the child queries to the parent query?

Helen,
The best way for your case is to use a content folder and customize it whichever way you like.
however, your question is about reports. the problem in reports is this that you have to use just one single query and the layout of the results of this query are displayed in a peculiar way.
anyway. something similar but not exactly the same as what you wanted do is the following.
use a query like the following: (with a union in between)
SELECT COLUMN1,NULL , NULL ,NULL ,NULL
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
UNION
SELECT NULL,COLUMN2 , COLUMN3, COLUMN4, COLUMN5
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
---------- Now, have the following codes in the layout segments:

<table border="0" cellpadding="1" cellspacing="1" width="20%" align="center">

<tr align="center">
<td><table border="0" cellpadding="1" cellspacing="0" width="30%" align="center">
<tr align="center">
<TH><#COLUMN1.FIELD#></TH>
</tr>
</table>
</td>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN4.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN5.FIELD#></TD>
</tr>

<TR><TD></TD></TR>
this should produce a report with a table structure (you may see the whole if you give BORDER="1" in the main table tag). Within this table, the first column of the first row should be showing top-leftmost column value once (COLUMN1 value) and then the next rows would show last four column values as a table block on the right-bottom part.
with kind regards,
naqvi

Why do receivers of my text messages get them mixed with messages I have sent them in the past?

The hardware is an iPhone 4 on iOS 5.1.1 with a capacity of 16GB (14.0GB). Currently I have 1.8GB available memory. The phone has never been jailbroken and no external accessories have ever been attached to it.
The problem:
Some of the receivers of my text messages have recently told me that a number of my text messages are coming in a little jumbled up. Apparently the message I had just sent gets concatenated with a past message or various past messages. The order where the past message gets mixed is not always the same - sometimes it's in front of what I have typed and sometimes it's in the end but in all cases inserting the past message also deletes parts of the message I typed. Furthermore when checking the thread there seems to be nothing wrong and the messages are shown in the same way I have typed them rather than how the receiver got them.
The question:
I have tried to see if other users on the same carrier, from the same locations as myself had the same problems as myself on other systems. I have checked Symbian, BB, Android and the older type of non smart phones and I have found no one with this problem. This rules out the carrier completely.
I would like to know if this is a problem which requires intervention by Apple or if it something I can fix myself. I have reinstalled the iOS5.1.1 yesterday but the problem seems to stay. I have turned the phone off and on a couple of times but it was in vain. I have also turned the phone off by holding the home and the standby buttons, but the problem seems to stay.
Any help would be very appreciated. I do not find any objection if I have to take my phone back to the official seller but if it something I can handle myself I would save them the hassle.
Thank you in advance.
Dan

Its because you are sending them as iMessages and not SMS.
If you want to turn iMessage off, go to settings, messages and turn it off.

How to dynamically determine Receivers within BPM

Im trying to design a way to determine my receivers within my BPM process during runtime.   My Scenario is as follows:
SAP IDOC
    V
XI
             XI uses JAVA Mapping MT1 to determine vendors and if customer receives PIDX
                         JAVA Mapping MT2 to creates the PIDX output file if required
V
SENDs to required Vendor (PIDX if required otherwise email)
My problem is how to dynamically determine the appropriate receiving vendor for my PIDX.
I can not use the condition editor on the standard Receiver Determination because the output message (PIDX) doesn't have specific enough information to determine the vendor.
Other than the customer number there are no other values and we don't want to use customer number because each vendor can have multiple customer numbers (hundreds).
I've tried various attempts but none seem to work. This could also be because I have limited knowledge of BPMs and this is my first complex development. Below are the different attempts I've made at dynamically determining the receiver. Any input would be appreciated.
Receiver Scenario 1
I developed an interface mapping with MT1 as input and the SAP Receiver Determination as output. The problem is for me to use this, the interface mapping had to reference the PIDX output (MT2 instead of MT1) which has no data that I can use to determine the receiver.
Receiver Scenario 2
I added a receiver step right before my send step and used the receiver list. This appears to send the PIDX to everyone in the list and there is no way to evaluate or eliminate a name from the list.
Receiver Scenario 3
I created a context object in the Integration Builder and assigned it to a field in MT1. I then added a switch step with a branch for each vendor. Within each specific branch there is a Send step that has the context object name I created in the "Send Context" field. However, on the configuration side Im unable to access the context object which I created on the design side. Whenever I open the condition editor and select the radiobutton for "Context Object" the list does not include the context object I created in the Integration Builder.

Hi,
Try using the enhaced receiver determination concept.
Maybe based on certain field values you can write a UDF which calculates the receiver.
Try this Blog out
Link : [
http://help.sap.com/saphelp_nw70/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm]
Regards,
Abhishek
Award if helpful.

Error Msge GA733 'The segment contains no receivers'

Dear SAP Gurus,
I made a Profit Center Assessment Allocation using 3KE1 with parameter as below :
Sender Values : Posted Amount
Share in % : 100%
Receiver Rule : Variable Portions
Var.Portions Type : Actual Quantities/SKF
Scale Neg. Tracing Factors : No Scaling
The receiver's profit center group has been set, as also the SKF on the Tracing Factor and i have posted the SKF quantities from 9KE5.
Nevertheless when i run the allocation using 3KE5, a warning message always appears saying 'The Segment contains no receivers'.
Is there any solution? Really appreciate your help.
Rgrds,
Aoi

Hi ,
Its a product error . Refer OSS Note 73384 - Allocations: Segment has no receivers and implement the correction..
In case this OSS doesnot help you.. raise a fresh OSS message..
Regards
Sarada

The segment contains no receivers:: Message no. GA733, in CJWB

Hi,
I am facing one problem in executing KSWB (Plan periodic reposting)
The scenario is like we are transfering the acutal cost to plan cost by cj9cs.
Subsequently , We want to repost the cost from Plan version to Receiver WBSE .
CJ9CS went off succesfully, but when we come to kswb, it is giving the following error.
The segment contains no receivers :: Message no. GA733
We are using PLanned statistical key Figure for the same. We are only using WBS ELements as sender and receiver and are not using activities.
We have created Respective Sender and Reciever WBS Group.
I hav already referered the existing threads on this but of no avail.
Kindly key in your fresh inputs.
Regards
Rohit

Hi Saurabh,
Thanks for revert. However, we are using 6.1 and that not is valid for sap3.x release.
The team has checked the INCLUDE MKGALF01 in se38 and this note is already implemented.
What else could be the reason.
Regards
Rohit

The segment contains no receivers:: Message no. GA733,

Hi,
I am facing one problem in executing KSWB (Plan periodic reposting)
The scenario is like we are transfering the acutal cost to plan cost by cj9cs.
Subsequently , We want to repost the cost from Plan version to Receiver WBSE .
CJ9CS went off succesfully, but when we come to kswb, it is giving the following error.
The segment contains no receivers :: Message no. GA733
We are using PLanned statistical key Figure for the same. We are only using WBS ELements as sender and receiver and are not using activities.
We have created Respective Sender and Reciever WBS Group.
I hav already referered the existing threads on this but of no avail.
Kindly key in your fresh inputs.
Regards
Rohit

Hi Saurabh,
Thanks for revert. However, we are using 6.1 and that not is valid for sap3.x release.
The team has checked the INCLUDE MKGALF01 in se38 and this note is already implemented.
What else could be the reason.
Regards
Rohit

How to change settlement receivers in internal order

Hi
Internal order holds costs date back to previous year. I would like to perform settlement to the Cost Center and will perform Manual reposting from Cost center to the order in current fiscal year.
To perform this in order master data under settlement rule receivers are assets. I would like to add cost center as settlement receiver.
Any one help me on this how to change settlement receivers.
Useful aswers will be rewarded with points
Regards
Prasad

My problem is solved in the other way,,,,,,,i have settled costs date back to 2006 to the cost center and from cost center manually posted the to the order
and performed order settlement in 2007.
so previous year balance has been carried to the present year

Help needed in Multiple Receivers sceenarios using BPM

Hi,
I am new to BPM. As per my requirement, based on a business logic i may split the messages into two at message mapping. If i have spitted the messages into two, it should go to different receivers. Or if my logic hasnt splitted the mesaage means it should go to any one of the receivers. I also expect response from the receiver system once its done successfully.
Could you help me how to do this using BPM?
Thanks & Regards,
Senthil.

Hi,
You can do it without BPM also, by using MultiMapping. If only splitting is required then I would suggest not to use BPM since it will consume much memory. Instead you can use multmapping.
For Multimapping, go to messages tab in message mapping and select your different target structures and map it as per your requirement. In Integration Directory, go to advanced Interface Determination and proceed.
Br,
Madan Agrawal
Edited by: Madan Agrawal on Feb 12, 2009 8:25 AM

Settlement to different receivers

Hi Experts ,
Please help me with the following:
The requirement is like this.For a given WBS , logistic costs should be settled to AUC and Activity allocations/Confirmations should be settled to Cost centers.
Which means ,in the settlement rule of WBS , i would be defining the two settlement rules and they are 1)Cost Centers 2) AUC's .
Now , when this particular WBS when settled , the costs should go to the respecvtive receievers.This is not by percentage basis or Amount basis but based on the actual data for that period.
In other words,If the Actual costs for the Activity Allocations were $ 100 and actaual costs of goods posted is $36 .Then the settlement should also happen like $100 to Cost Center & $36 to AUC.
Some times the receivers can also be a GL.
How can i address this scenario ....Please help.
Regards
Judy

As suggested source structure is standard approach but If wanted to have detailed level of segration in that case you need to make use of business transaction / reference business transaction but this would be development ( may be based on BADI K_SETTLEMENT_2 )
Just to explain source structure can select based on CE of cost posted. suppose if you have posted two type of cost one via activity confirmation CN25 and second via KB21 on same CE and you wanted to settled both type of cost two seperate receiver in that case you need to use reference business transaction ( confirmation -AFRU / KB21 - COBK ) while as both are RKL - activity allocation kind of business transaction ) for catering this kind of requirement you need to use development if your CE master data set up is not done to take unique cost.
With Regards
Nitin P.

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

IDoc TO File: Receiver Determination did not find any receivers at all

Hi,
We have IDoc to file scenario, where based on attributes present in IDoc we have configured different receivers.
Everything was working fine and files were getting created based on the receiver determination criteria.
But there is one change done in custom IDoc to re position the attributes.
Idoc before changes was having NAME1 and NAME2 above KATR6 and KATR7 and after change it looks like below:
So there is no change in segment and no change in mapping but the attributes KATR6 and KATR7 are used to determine the receiver.
Cache refresh is done for both ESR and ID. I have re - entered the receiver determination criteria just to ensure that change should reflect.
But still when I am triggering outbound IDoc from ECC to PI, the transaction is getting errored out with below error:
"ErrText": "Processing error = Receiver Determination did not find any receivers at all",
Can any one providee some idea what could be the reason and what is the right approach to resolve this issue.
Thanks,
Vertika

Hi Krupa,
I have marked your answer as helpful answer and delete of metadata wasn't required.
Reload works . But thanks for your suggestion.
Thanks,
Vertika

Mutliple receivers

Similar Messages

Maybe you are looking for