Mutt new tags issue with Gmail via IMAP

Hi all,
I've been using Mutt for a while and I very much like it.
However, Gmail's IMAP implementation is a bit weird and causing me some troubles. I'm accessing my Gmail account directly via Mutt (NO offlineimap and NO trash patch). In particular, I'm getting lots of emails marked as new in my All Mail folder that I've already read.
I've realized that if I receive an email, then read it (or remove the new tag), mark it as deleted and then sync-mailbox, when I go to the All Mails mailbox it's still tagged as new.
If I read the message, sync-mailbox (note this additional sync), mark it as deleted and then sync-mailbox once again, then it doesn't appear marked as new on the All Mails mailbox.
Any clues? This is really driving me crazy. I must be doing something really wrong but I can't figure out what. I've already tried setting delete_untag without luck.
Thanks in advance.
For the record, I'm using Mutt 1.5.20 (with IMAP support but no trash patch). Here's my .muttrc:
set realname = "..."
set from = "..."
set imap_user = $from
set imap_pass = "..."
set folder = imaps://imap.gmail.com/
set spoolfile = +INBOX
set postponed = +[Gmail]/Borradores
set smtp_url = smtp://[email protected]:587/
set smtp_pass = $imap_pass
set copy = no
set certificate_file = ~/.mutt/certificates
set header_cache = ~/.mutt/cache/headers
set message_cachedir = ~/.mutt/cache/bodies
set sort = threads
set sort_aux = reverse-last-date-received
set pager_index_lines = 6
set markers = no
set timeout = 120
set delete = yes
set beep_new = yes
bind index y imap-fetch-mail
macro index pr "<change-folder>=INBOX<enter>"
macro index pe "<change-folder>=[Gmail]/Enviados<enter>"
macro index pb "<change-folder>=[Gmail]/Borradores<enter>"
macro index pt "<change-folder>=[Gmail]/Todos<enter>"
macro index ps "<change-folder>=[Gmail]/Spam<enter>"
macro index pp "<change-folder>=[Gmail]/Papelera<enter>"

I have this same issue using gmail with offlineimap -- because of the multiple tags, removing the INBOX tag (deleting from the inbox) doesn't remove the Unread status from the version stored in the All Mail (or archive) folder. I think we'd need a macro that detected the duplicate mail and marked both as read -- not sure if that'd work or not.
I'd also like to figure out how to tell if an incoming message was automatically tagged with another label by my gmail filter (display what other labels are assigned to a message in any view).
Anyone got any ideas?
Scott

Similar Messages

Mail 6.2 having issues with Gmail Imap

I have issues with Gmail IMAP online on mail 6. Restarting Mail helps getting new messages but soon become offline and cannot be reset. Read may post and tried what was discussed but yet could not find any firm answer. The problem seems started new after upgrade to osX10.8.3

Hey hikari07,
If your Gmail account cannot be added to the iPhone, it might be locked, try unlocking it.
https://www.google.com/accounts/DisplayUnlockCaptcha
-Jason

Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

Do the usual wireless things.
Change the wireless name to simple name with only alphanumerics and no spaces.
Set to manual and use channels 1, 6, 11 in turn.
For testing take off the security altogether.
The iphone only works on 2.4ghz so only that band is relevant.

Z10 Issues with GMail Imap / Microsoft Active Exchange

Hi,
I have seen lots of posts coming in on here and on crackberry.com about issues with emails. But I couldn't find any posts on the issues that I am having.
Just purchased a new Z10, coming from a BB 9900.
I would like to setup my gmail account on here but I am getting unexpected results. I have tried many different ways, gmail, imap, Microsoft Exchange ActiveSync and pop3.
What I find different from everyone is that I have a bunch of filters set up that auto direct some emails away from the inbox and into labels (folders). So I know things have changed from the 9900, but the way it happened on there was that a new email would show up in my unified inbox on the BB whether or not it was filtered. Then after reading it, I would have to search for it because it wouldn't actually be stored in the inbox. Which I was fine with.
We'll have my email description setup as "Personal"
Issues that I am having:
Imap set up:
- When I go from hub to my "Personal" box, it is a duplicate of my inbox. Looks the same as my inbox in mail.google.com, all nice and dandy.
- Emails that go directly to my inbox show up nice and quick and give me a notification in the hub etc.. that an email has shown up.
- Now when I receive an email that is being filtered. Gmail.com has it right away in my labels. So I know it's there. I can wait the 15/30 minutes that is setup for the sync, but I never get a notification of the email. If I go to the folder (by clicking on the drop down by the email description) then it shows up there with the yellow mail saying that it's a new mail. But there still isn't a notification saying I got a new email.
So that's IMAP.
M$ Exchange ActiveSync set up:
- Initially, going straight to my personal box from the hub makes it look somewhat like what it did on my 9900. Inbox, and filtered messages all showing up in the default view.
- If I receive a NEW (not part of a conversation) message that is/is not being filtered it shows up in this default view and I get a notification in the hub.
- Once I read that email, then go back to the default view. IF it is a msg in the inbox, it disappears and the only way I can find it is by going to the drop down then to the Inbox. But this seems to be random, sometimes it stays, sometimes it disappears. Also, if it gets moved directly to the inbox and I get a reply to that message I don't get a notification for a new email.
- If the email is a filtered email, it stays in the default view.
- Now if I get an email that is part of a conversation to a filtered email, I don't get a notification that I have a new email, but if I go to it from the hub, it's marked as a yellow mail symbol stating that it is new. Read that email, it stays in the default view.
So that's M$ EAS.
Email:
*******@gmail.com, so not a Paid Account or anything, just a regular gmail account. IMAP settings turned on and setup.
Hub Settings:
Display Style: conversation
Display order: name, subject
display message count: on
display new message indicator: on
show filed messages: on
show sent messages: off
Download images automatically: off
delete message confirmation: off.
Oh when I tried the gmail setup I believe it just used the same settings as IMAP. Pop3. just a disaster, all my messages were brought in (sent/receieved) marked as unread. Won't even bother with Pop3.
I'm not sure if I'm doing something wrong with my setups, or that this is the way it is designed. I really don't want to have to check each folder everytime to see if have a new email. And I don't want to change my gmail setup so that nothing is filtered. I thought I had solved it with the M$ EAS but with the random moving of messages to other directories, it's a no go aswell.
If anyone has any ideas or suggestions for me it would be greatly appreciated.
Thanks.
Curtis

Hi,
I'm the author of the article linked to above. I appreciate the reference, but I don't think my article solves the OP's particular issues. To date, I've not found a way to enable notifications on new content in subfolders. I think this is a limitation in the BlackBerry 10 email client.
Since the paint is still wet on this OS, we can expect to see some improvements in forthcoming service releases. CalDAV for example is known by BlackBerry to be broken with Google Calendar. No ETA to fix at present. BlackBerry will have to address that, and soon.
I don't yet know if OS 10 is going to gain the traction the BlackBerry needs to survive in the market. If it does, I suspect we will see some third party email apps appearing in BlackBerry World in the future, with enhanced IMAP functionality. There's some precedent for this and we've seen similar happen on other mobile platforms. In any case, until BlackBerry does some email client rewrting, or an enterprising developer plugs the gap, I think the OP's niggle is going to remain. At the time of writing, BlackBerry World is showing a White Screen of Death. Figures.
One thing I'd urge all Google Apps users (especially of free accounts) to bear in mind is that Google will be pulling the plug on ActiveSync in the very near future. I've blogged about this in more detail, in a followup to my previously-mentioned post: Gmail + Google Apps on the BlackBerry Z10.
I hope this clarifies the position, even though the reality is less than satisfactory.
Rob

Mail rebuild mailbox issue with Gmail

I set up Mail 4.6 to receive and send e-mails to and from Gmail as per the instructions on the Gmail site and used additional information on this forum.
What is happening is whenever I rebuild the gmail folder it downloads again all the files I have deleated. I rebuild after deleting a lot of Spam and e-mails I no longer need.
As recommended the account is set as a imap account.
Under the mailbox tab it is set:
DRAFTS: Store draft messages on server - box not checked
SENT: Store sent messages on server - box not checked
           Delete message: dropdown set to: One day old
JUNK: Store Junk messages on server - box not checked
          Delete message: dropdown set to: One day old
TRASH: Move deleted message to the Trash mailbox - box is checked
             Store deleted messages on the server: - box not checked
             Permanently erase Delete message when: dropdown set to: One day old
Under the Advance tab it is set:
Enable this account - box is checked
Include when automatically checking for new messages - box is checked
Compact mailboxes Automatically - is greyed out - box is checked
Keep copies of messages for offline viewing: dropdown set to: All messages and their attachments
I am not sure is this last item of 'Keep copies of messages for offline viewing' refers to the the Gmail server or the mail box - if it is the gmail server then I guess Mail is just syncronising with this; thus any mails I delete will be down loaded again. ((All the other mail servers I use I set under Advance tab to 'Remove copy from server after retrieving message' - but this option is not shown for gmail.
Two things are happening:
a) When I delete files in the Mail, Gmail folder the next time I rebuild the mail box I get 1000 + emails down loaded; even though I may only have deleted 30 or so.
b) At other time mail will show downloading e-mails in the blue download indicator, but no new emails appear.
Would welcome some direction on how to resolve these issues; thank you.

The issue with g-mail became cronic. Now I can't delete e-mails received to my gmail account.
When I try to delete emails in the gMail or Mail inbox the following message is show.
The Message could not be removed to the mailbox (null)
The destination mailbox "(null)" does not allow messages to be moved to it.
This started after following the recomendation I found in the forum to sync gmail folders to the Mail - folders.
I am looking for solution to get back to the original condition that while not what it should be it is better than now.
Was hoping for solution were I wouldn't have to delete gmail account from mail then start again.
Any ideas welcome as I would like to delete emails in the gmail folders in Gmail without logging into Gmail every time.
Thank you

New HH3 - Issues with Kodak Printer and iPhone 3GS

Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...

For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

Vlan tag issue with Nexus 4001 in IBM Blade Centre

Hi
I have a DC architecture with a pair of Nexus 7010's running 3 VDC's (Core/Aggregation/Enterprise). I have at the edge Nexus 5548's which connect to back to the Aggregation VDC. Also connecting back to the Aggregation VDC is an IBM Blade Chassis which has a Nexus 4001i in slots 7 and slot 9. These blade servers are running ESXi 4.0 and are mapped to the Nexus 4001 blade switch.
I had set up the Native VLAN as VLAN 999 which connects up to the ESXi host and I am trunking up multiple VLANS for the Virtual Machines.
The problem I have is that VM's in all VLANS except the ESXi host VLAN (VLAN 10) cannot see their default gateway, and I suspect that there is an issue with the VLAN tag going up to the ESXi host. I have read enough documentation to suggest that this is where the issue is.
My Nexus 4001 interface configuration is below
interface Ethernet1/1
switchport mode trunk
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40-41,60-62,90,96,999
spanning-tree port type edge trunk
speed auto
The Aggregation VDC on the Nexus 7010 is the default gateway for all these VLANS.
I also noted that the Nexus 5000 and Nexus 7000 supports the command vlan dot1q tag native command yet the Nexus 4000 doesn't seem to support this. Any assistance would be useful
Thanks
Greg

Your configuration on the N4K looks correct. You shouldn't use vlan dot1q tag native commands on your N7Ks and N5Ks. Native VLAN tagging is really for QinQ (dot1q tunneling).
My only suggestion is check your configuration of the vSwitch in the ESXi host and the host network profile.
Regards,
jerry

Continuing font encoding and tag issues with snow leopard and CS4oI

I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov

Issues with ldap_add via LDAP Interface on WS 2008 R2 from WGM for mounts

Important Setup Information:
Active Directory domain on Windows Server 2008 R2
Extended AD Schema to include apple-* attributes
Mac OS X Snow Leopard Server 10.6.2 bound to Active Directory
Connected to Active Directory Forest in Workgroup Manager with Domain Admin / Schema Admin credentials.
The Issue:
When attempting to configure a Home path using an SMB URL using the following attributes:
Mac OS X Server/Share Point URL:
smb://gio-storage-01.giodivine.com/Users
Path to Home Folder:
user 01
Full Path:
/Network/Servers/gio-storage-01.giodivine.com/Users/user01
I receive the following error:
*Not authorized.*
This action failed because you are not authorized to perform the operation.
I checked the console, and found the following (completely useless) error:
Got unexpected error of type eDSPermissionError (-14120) on line 574 of /SourceCache/WorkgroupManager/WorkgroupManager -361.2.1/Plugins/UserAccounts/UserVolumesPluginView.mm
I enabled diagnostic logging of the LDAP Interface on the Active Directory server and acquired the following error attributed to the "permissions" issue that Workgroup Manager emits:
Internal event: Function ldap_add entered
Internal Event: The LDAP server returned an error.
Additional Data
Error value:
00000057: LdapErr: DSID-0C090C30, comment: Error in attribute conversion operation, data 0, v1db0
So; it would appear that there is some issue with the Active Directory schema extensions, or that the UserVolumesPluginView module is not referencing the schema correctly. My expectation would be that an apple-mount object be created to describe the mount point in /Network/Servers and that the unixHomeDirectory attribute on the User object would be set to the newly created map point.
The latter occurs, i.e. the unixHomeDirectory attribute is set to:
/Network/Servers/gio-storage-01.giodivine.com/Users/user01
The map point is never created in Active Directory, however. It did create a new container in AD at the root, i.e. cn=Mac OS X,dc=giodivine,dc=com, but nothing is ever created there.
I have attempted to completely remove all of the extended schema changes, re-compare an OD master against the AD PDC, recreate the schema changes LDF, and re-apply the changes to no avail.
Any information as to how I can find out exactly what call to ldap_add is being made so that I can somehow track down the faulty schema extension attribute would be helpful. Are there ways to enable verbose diagnostic logging of Workgroup Manager and it's accompanying modules?
Thanks in advance!
Deavon M. McCaffery
<Edited by Host>

Hi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected]

New MBP issues with certain games

I have a new post Feb 08 MBP. I have bought the Diablo and Starcraft Battle Chests, Fallout, Fallout 2, and Knights and Merchants. I have issues with all of them and these issues cannot be duplicated by owners of pre Feb 08 MBPs.
The Diablo and Starcraft issue has been recognized by Blizzard and they are working with Apple:
http://www.battle.net/forums/thread.aspx?FN=support&T=535843&P=1
Reports to MacPlay about Knights and Merchants, Fallout and Fallout 2 have gone unanswered.
Can any other new MBP owners confirm the Fallout or K&M issue?
With Fallout I and II I have obvious graphical issues with the palette. K&M loads but I only get sounds, no window at all.
If you have issues with Diablo II and Starcraft please post on the battle.net site above. Thanks!
Message was edited by: Ogmios

Hello all,
This seems to be a problem! I wonder if it will be similar with the new iMacs that are coming out with this new processor!
So yeah, when I load up Fallout 2 on my new Macbook Pro I get the weird graphics palette and on only one half of the screen. Seems a little phishy to me! I don't even know if there is a patch that could help! It SHOULD be solved my Rosetta or something . . . but if the new Pentyn architecture is faulty, it would have to be a recall, not a patch!
Makes me a little nervous to tell you the truth!

"New" IE8 Issues with Apple Site?

As a diehard PC user who just recently purchased an iPod Touch, I am spending a lot more time on the Apple site than in the past. I am having nothing but problems with the main Apple site when I access via IE8. The main page takes forever to load up, then mouse clicks go unnoticed or take forever to respond to. Once I get beyond the Apple home page, things start to improve but a couple of odd errors from time to time. For instance, I was accessing this forum via Firefox, then decided that I wanted to do the same side by side with IE8. Obviously, no issues with any Apple site and Firefox whatsoever. On IE8, when I went to "Login", even after logging out on Firefox, it said that the page didn't exist.
If I didn't know better, I would think that Microsoft and Apple don't get along All kidding aside, do I have to spend the rest of my life accessing Apple's Web site via Firefox, or can I use IE8 like I do for every other site that I access (yes, I have no other problems with any other sites that I access via IE8, except for Apple's).
Thanks.

mlb32704 wrote:
As a diehard PC user .... Obviously, no issues with any Apple site and Firefox whatsoever.
So now you get a feel for how the rest of us live, eh?
I understand how you feel, but Apple clearly doesn't give any consideration to all the hacks required to make Internet Explorer behave. They just code to the web standards that were published about 10 years ago. Having done a moderate amount of web development I can tell you that Firefox and Safari render and behave virtually identically. All version of Internet Explorer require some sort of hacking to make work. I have three separate CSS files I include with my web sites (ie6.css, ie7.css, and ie8.css) that contain distinct sets of hacks to make pages that look perfect in Safari and Firefox look somewhat decent in IE. You would think that the number of hacks would decrease as the IE version number increases, wouldn't you? Sorry. Each version has its own distinct bugs. If there is any web site in the world that shouldn't have to deal with that, it is apple.com. If you don't want to use Firefox, try Safari for Windows.

Constant security issues with gmail in firefox and no words on buttons.

I have firefox 10.0.02. I did a clean install on my system and installed bitdefender immediately afterward. I have been having constant security errors since then with regards to SSL certificates. I will get the error messages for invalid security certificates constantly, but only with a few sites (mozilla add-ons and gmail/google images sites specifically). Additionally, some of these sites will only load in plain text without styles as opposed to html. Finally, often gmail, or google images will have issues with loading certain artifacts, such as the test on the forward reply and other buttons in gmail, and the images in google images will often not load with only grey rectangles instead. Bitdefender's root certificate will also not install, despite constantly prompting to close firefox and install, which I occasionally let it do, with no result.
I've tolerated this problem for several months now, but now that I am working on a business and a website constantly with multiple email accounts, it is getting completely frustrating.

You need to take that up with Bitdefender support or uninstall that program if you can't make it to work properly.
*http://www.microsoft.com/security_essentials/default.aspx

Weird Text Issue with Gmail

Hey all,
I'm an avid user of Gmail - I love the massive storage space, the way it sorts messages, how messages are grouped into conversations - the whole works. A day ago, I noticed Safari was doing something odd with the text in the subjects, but thought it was just an abnormal glitch. I refreshed, and no change. I logged off and logged back on, and no change. I restarted and no change.
Here's what I see:
Notice the little cross and line down from the first letter of each subject. This is on every single message in my Gmail inbox and outbox too - not just my iTunes weekly emails. It does not occur on any message in my Spam folder though (grrr...)
When I loaded up Gmail on my PC, it was perfect, so I knew something was just odd with the Mac. I thought why not try a different browser on my Mac, so I loaded up Bon Echo (the Mac specific build of Firefox). That also displayed it perfectly, as seen here:
For plugins, I have Inquisitor and used to have ForgetMeNot. I tried removing both to solve the issue, and no luck. I've also deleted my Safari plist and cleared the cache.
Although this is not a huge issue, I would like it sorted out. If anyone has any suggestions, I'd be happy to listen and try them out.
Thanks for your time!

Hi yuiichi!
The font for Safari looks a little bit bigger than the font for Firefox, so how about trying this.
Click Safari in the menu (next to the Apple), and select Preferences. From here, click on Appearance, and set whatever font you have as the Standard Font one size smaller (so if it is 16, make it 14). I'm not positive that will work, it could be an error with Gmail rendering in Safari, but I'm pretty sure this "trick" will work. Hope it helps!

HT6030 I am still having issues with GMAIL not syncing or moving it's duplicating items as I move them to folders and my inbox is overflowing now..... help?

according to the last update it was supposed to fix the gmail issue in apple mail with syncing/archiving/etc. now it is not only duplicating but still not syncing properly and moving emails once I've moved them/ My inbox is overflowing and this is NOT acceptable.

as rediculous as this is, I enabled "all mail" under the labels, then went into the actual apple mail settings and checked some box about updateing immediately (for deleted items) . then I had to quit mail then open it back up - it "appears" to have synced properly. I'll let you know if it all comes back, but this is really a pain in the butt, I swapped from Entourage a few months back because it started acting weird with gmail.
anyone have any other mail options if this continues to not work? I don't want to have to pull gmail in my browser to move read items each day.
thanks for all the help.

Issue with Dial-via-Office and CDMA Carriers

We recently deployed Communications Manger 9.1 with Jabber (CUPS) version 9 so that we could leverage the new Dial-via-Office feature on the iOS and Android Jabber client (version 9.1.1.21178). DVO works great when on a non-enterprise Wi-Fi hotspot with VPN, but when using VPN over Sprint cell data, DVO disconnects after 59 seconds. We suspect that because we are unable to send data while on a voice call that the Jabber client is unable to send a keepalive to the CUCM in order to keep the call connected. As a result, the CUCM thinks that the call has dropped and then terminates the call. We do not have this issue on GSM based phones.
Does anyone know if there is a timer that can be modified such that the CUCM will not drop the call even if the keepalive doesnt exist? Or, has anyone else found a solution to this?
Thanks,
Chad

The closest you'll be able to get for now is the Mobile Voice Access feature where he dials a number, authenticates, and can the dial another number that CUCM sources from the user's DN. The only part it won't do is call the user (DVO-Reverse).
The DVO Forward/Reverse features are not supported by any currently shipping client. They used to be able to do this with CUMA but that is EoL. At least for now this hasn't made it's way into Jabber. The closest Jabber gets is a related feature where a call started on VoIP can be handed off to cellular. In that case CUCM does call the cell phone but the call has to start on VoIP.
Please remember to rate helpful responses and identify helpful or correct answers.

Mutt new tags issue with Gmail via IMAP

Similar Messages

Maybe you are looking for