My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114119)

Similar Messages

My iMac 27" is asking for a 4-digits Pin which i never had

My iMac 27" is asking for a 4-digits Pin which i never had

Have you locked the iMac with Find my iMac, if so use that 4 digit pin you used then?

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

Free trials are not available through the Mac App Store.
Apple is not here. Apple does not answer questions here. This is a user to user support forum. There are only folks here who use Apple products.

ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2    (description VARCHAR2(60),
3      langcode     VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created.

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

HT5312 The link to reset security questions does not exist anywhere I have found...any know where I can get it?

Does anyone know how I can reset apple id security questions? In support they show a link but that does not existing anywhere that I can find. I just got a new phone and cannot buy anything without answering the questions but I cannot seem to get the answers right.

If you don't have the link then I assume that you don't have a rescue email address (which is not the same thing as an alternate email address) set up on your account, in which case see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

How do you change the location of where your photos are stored?

How do you go about changing the location of where your iPhoto files are housed? I'm running out of space on one drive and want to move them all over to a drive that can house all of the current (and future) photos?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Thunderbird asks continually to confirm security exception and I cant save the exception permanently

My ISP (Shaw Communications-imap.shaw.ca) has a certificate that is invalid. Every time Thunderbird tries to get mail it generates an exception. Needless to say after a few hours it will have generated dozens of these which is irritating. I have checked the box "Permanently store this exception" but it no longer has the desired effect. This behavior started about a week ago. Before that it permanently stored the exception as desired. What has changed and how can I tell TB to ignore the IMAP server's certificate permanently.

After an hour or so, thunderbird erases these permanent certificates. Once it erase them on the same session, it will never be able to accept the certificates. I have to reboot the PC to reset this problem every time it happens. This is very annoying problem. What to do?

When I go to write a new text and I write my friend's name in, the phone gives me a choice of two numbers. One of them does not exist on the phone anymore, having been deleted. There is no pre-existing conversation so why?

Can anyone help with this as it is driving me mad and I keep calling numbers which no longer exist or I send texts to wrong numbers. There is no existing text converstation but when I go to write a name it will still show an old number which does not appear if you look at the entry for that person in contacts.

RLites22,
I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
KevinR_VZW
Follow us on Twitter @VZWSupport

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

Does someone know why september of 1978 does not exist on my iPhone?

I am trying to create a birthday alarm on september of 1978 and it doesn't work.

I edited one of mine and was able to set the birthday to Sept 15, 1978 so it's not an iOS issue.
Try setting it to the 14th and see if that holds. Then try the 15th.
If still a problem, try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Java is not been friendly with Firefox 11 and above, I thought that the new 12 version would solve this issue but I was wrong, it does not work either

Java is just not running on Firefox 11 or above, it keeps telling you that is not running and it needs to be installed, my operating system is Windows 7 x64bits. I don't know if this problem also exist on x86 bits OS. I really like Mozilla and for now I've been obligated to use IE9 for Java based webpages and I don't like it. Any help on this issue will be appreciated.

*Firefox 12 (and all previous) is a 32-bit browser and requires the 32-bit version of Java. 32-bit browsers will run on 64-bit operating systems as you have experienced.
*If you have both 32-bit and 64-bit browsers installed on your system, you will need to install both 32-bit and 64-bit Java.
See --> https://www.java.com/en/download/faq/java_win64bit.xml<br />
See --> https://support.mozilla.org/en-US/kb/latest-firefox-issues#w_java-doesnt-work<br />
See --> https://support.mozilla.org/en-US/kb/unblocking-java-plugin
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Tax code I9 does not exist for jurisdiction code SP 3522604

Hi Friends,
At the time of posting a document using t-code FB50, we are encountering an error " Tax code I9 does not exist for jurisdiction code SP 3522604".
Please suggest a solution.
Tks & Rgds,
Rahul Jain

Hi
Please check the following path
F.A(New)
F.A.Global settings(New)
Tax on Sales/Purchases
Basic settings
1.Specify Structure for Tax Jurisdiction Code
2.Define Tax Jurisdictions
Please complete the above two steps, then your Jurisdiction code will be mandatory for the tax code in FTXP.
Rgds
Murali.N

My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

Similar Messages

Maybe you are looking for