My Application Exit without a reason!!!
(Excuse my bad English)
I have developed a large stand-alone application to manage financial transaction.
this appz run over a Win NT 4.0 server 24h to 24h.
After some day the application exit (closing the GUI and returning to prompt in console) without Exceptions or bad behavior!
I think that's a problem of RAM but the Application
dont' throw the java.lang.OutOfMemoryExceptio...
please help me!!! Paolo
I think that windows kill the java.exe process because use too RAM-space...
the level of RAM used always increase during execution...
now i try OptimizeIt for resolve memory leaks...
Paolo
Similar Messages
-
I downloaded trial versions of Photoshop and Premiere Pro on my brand new MacBook Pro 15" retina 2.8GHz Intel Core i7. OS X 10.9.5
Photoshop works perfectly. When I try to open Premiere, the application icon on the dock flashes and then disappears without an error message. I have tried (several times) to sign out and in again to Creative Cloud. I have also uninstalled and reinstalled Premiere Pro. The same thing continues to happen.
Any suggestions? I'm extremely frustrated as my old version of Final Cut doesn't work on this OS, and I'm keen to try out Premiere before I commit to buying (renting) it.
Thanks, Team.Somekind of hardware incompatibility probably. Tech support will work through install/launch failures probelms with you for no charge if you call/chat them.
Having CS5 installed or uninstalled shoudl have nothing to do with it, both apps can run live on the same system simultaneously. -
Satellite L300-17L is putting itself on stand by all the time without any reason
Hello Eldorado,
i am sorry that this is not a question in connection to the topic, but i have L300 - 17L laptop and from time to time it is shutting down (more specifically putting it self on stand by) without any reason.
It is not the cooler or anything else..
The battery is full, and that is happening while i am writing or working on the laptop generally!
The local service says that is nothing wrong with the laptop, i am so nervous, i cannot work , it is interrupting my work ..
PLEASE HELP ME! thank youHi
So what happens exactly?
Does the notebook shuts down or goes into standby mode?
You said it happens from time to time this means that it would not be easy to replicated this issue and I think the technician was not able to replicate this is it right?
What applications are running if this happens?
Did you try to restore the notebook back to factory settings using the HDD recovery or Recovery disk? Do this!
Check also if your BIOS is up to date! -
DAtapump Import/Export Exit without errors
Hi,
I have cloned a single instacne database into a RAC instance and now here is the problem that am facing.
The EXPDP in the new RAC environment is getting exited without errors . See the error message below.
$ expdp schemas=xxxxdumpfile=SAMP.dmp logfile=SAMP.log directory=DUMPDIR
Export: Release 10.2.0.4.0 - 64bit Production on Monday, 14 February, 2011 18:16:22
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
$
It doesn't throw error nor take backup. It simply quits.
Any suggestions. I googled a lot but now solution.
Please help...Pl post details of OS and database versions
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_export.htm#SUTIL2890
HTH
Srini -
After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel
Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.
-
Exception occuring during Application exit.Help needed fast
The Error attached is printed on the console when I exit my Application.My Application is Swing application which reads two or more xml schemas at a time from a local directory and displays the schemas in Tree like structure using JTree,so that mapping can be done using java drag-n-drop apis.
But during System.exit(1) (on Application Close) the exception Attached gets printed.I have invoked Syste.gc() to enforce garbage collection but to no effect.Please help to solve this problem.
Thanks
Pallav
--ERROR printed on console
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x0
Function name=(N/A)
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:183)
at java.lang.Thread.run(Thread.java:479)
Dynamic libraries:
0x00400000 - 0x00405000 S:\software\jdk1.3.1_06\bin\java.exe
0x77F80000 - 0x77FF9000 C:\WINNT\System32\ntdll.dll
0x77DB0000 - 0x77E0A000 C:\WINNT\system32\ADVAPI32.dll
0x77E80000 - 0x77F36000 C:\WINNT\system32\KERNEL32.DLL
0x77D40000 - 0x77DAF000 C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78046000 C:\WINNT\system32\MSVCRT.dll
0x6D420000 - 0x6D4F9000 S:\software\jdk1.3.1_06\jre\bin\hotspot\jvm.dll
0x77E10000 - 0x77E75000 C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7C000 C:\WINNT\system32\GDI32.DLL
0x77570000 - 0x775A0000 C:\WINNT\System32\WINMM.dll
0x6D220000 - 0x6D227000 S:\software\jdk1.3.1_06\jre\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000 S:\software\jdk1.3.1_06\jre\bin\verify.dll
0x6D250000 - 0x6D266000 S:\software\jdk1.3.1_06\jre\bin\java.dll
0x6D3C0000 - 0x6D3CD000 S:\software\jdk1.3.1_06\jre\bin\zip.dll
0x6D020000 - 0x6D12A000 S:\software\jdk1.3.1_06\jre\bin\awt.dll
0x77800000 - 0x7781D000 C:\WINNT\System32\WINSPOOL.DRV
0x75E60000 - 0x75E7A000 C:\WINNT\System32\IMM32.dll
0x77A50000 - 0x77B45000 C:\WINNT\system32\ole32.dll
0x6D1E0000 - 0x6D21B000 S:\software\jdk1.3.1_06\jre\bin\fontmanager.dll
0x10000000 - 0x10007000 D:\Program Files\Yahoo!\Messenger\idle.dll
0x72800000 - 0x72846000 C:\WINNT\System32\ddraw.dll
0x728A0000 - 0x728A6000 C:\WINNT\System32\DCIMAN32.dll
0x0D4F0000 - 0x0D503000 D:\PROGRA~1\INCRED~1\bin\ImHook.dll
0x779B0000 - 0x77A45000 C:\WINNT\system32\OLEAUT32.dll
0x6D340000 - 0x6D348000 S:\software\jdk1.3.1_06\jre\bin\net.dll
0x75050000 - 0x75058000 C:\WINNT\System32\WSOCK32.dll
0x75030000 - 0x75044000 C:\WINNT\System32\WS2_32.DLL
0x75020000 - 0x75028000 C:\WINNT\System32\WS2HELP.DLL
0x77840000 - 0x7784C000 C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000 C:\WINNT\System32\DNSAPI.DLL
0x777E0000 - 0x777E8000 C:\WINNT\System32\winrnr.dll
0x77950000 - 0x77979000 C:\WINNT\system32\WLDAP32.DLL
0x777F0000 - 0x777F5000 C:\WINNT\System32\rasadhlp.dll
0x77830000 - 0x7783E000 C:\WINNT\System32\RTUTILS.DLL
0x74FD0000 - 0x74FE1000 C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000 C:\WINNT\System32\wshtcpip.dll
0x6D2C0000 - 0x6D2DB000 S:\software\jdk1.3.1_06\jre\bin\jpeg.dll
0x77920000 - 0x77942000 C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000 C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000 C:\WINNT\System32\PSAPI.DLL
Local Time = Thu May 29 17:43:20 2003
Elapsed Time = 396
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_06-b01 mixed mode)to bbritta,
Sorry it did not help.By the way i am using windows 2000 Server.Application Server is Weblogic 7.0.No exception is shown in the Weblogic console also.
There is no problem in drawing of maps.Drag-n-Drop is working perfectly.But during application exit this errors occuring.
Thanks for your attempt.
Pallav -
Application exits with an exception code 0xc0020001 (with exit code as -1073740771)
I have a WPF application, which sometimes is exiting with an exit code of -1073740771. The issue is not occurring in any pattern and it's varying from system to system. In some system the issue is occurring for less that 10% of the total cases and
in other system I am seeing it occurring at a rate of almost 30% of the total cases. I haven't been able to form any solid repro steps and it seems to be happening at random.
The symptoms include that after I have clicked the close button, the application exits but in task manager I could still see the process lingering for about 20-40 seconds, and then in exits. The application seems to be shutting gracefully (from
a functional point of view) so it might not have much effect on customers using it, but the error code is getting logged in the logs which is pretty annoying.
This issue is also happening when I am debugging from Visual Studio, but no exception is getting caught in the try - catch block.
On analyzing the crash dump of the process (collected using Procdump) , its seen that an exception with code 0xc0020001
has occurred on thread 0, and the finalizer thread seems to be blocked. Any pointers to what might be causing the issue?Hi Pratik,
>>The symptoms include that after I have clicked the close button, the application exits but in task manager I could still see the process lingering for about 20-40 seconds, and then in exits
Have you used some native methods in your project, does it have some third-party references? In my experience, some third-party libraries causes this exception.
Because it's difficult to reproduce, I would suggest you making the following tests:
(1) Removing all native methods and third-party references
(2) If the above test has avoid this issue, I think you need to deep into the native methods or references
(3) If the above test still can't solve this issue, could you make a minimized demo without sensitive data for troubleshooting?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Dissapearing" speakers without a reason
Hello!
A long ago I bought the very first version o Sound Blaster Li've! and Speakers
Cambridge Soundworks FourPoint Sourround FPS2000 Digital Model No.CSW500
which functioned perfectly until WindowsXP arri'ved (I connected them using digital DIN connector).
After I switched from Windows 98SE I started to have problems with my speakers: they
are 4-point speakers and often after drivers or DirectX upgrade or without any reason aswell they simply dissapeared from the control panel of the soundcard (I mean I only
might choose 2-point speakers and (there was simply no other choice) after that the
rear speaker kept silence. Only complete deinstall, reboot and fresh new install of the
base drivers for XP and all the patches (during which I could choose which speakers I
use) allowed me to use fully my speakers... I had to do above sometimes 2 or 3 times a month. I tried to connect my speakers using analogue connectors - it didn't help at all.
I thought maybe it's time to switch to SB Audigy 2 and I did that and bought new card
leaving my old but perfect working and sounding speakers. I have to say the above
situation is now again: the possibility of choosing 4-point speakers simply dissapear
after 2-3 days of installation - firstly i cannot choose what kind of speakers I'd like to use (but the graphical diagram shows 4-point) and after some time the same diagram
shows only 2-point speakers and I of course cannot choose other ones) (I use games, movies, DivX, and office work). I of course could buy new speakers but I think the ones
I have it's enough for me at the moment and taht's why this question. I'd like to say that I switched to Athlon64 a month ago and earlier I used many other
configurations (like for example AthlonXP 3200+ + MSI KT6Delta Via KT600 chipset)
so I think it was hardware independent. It also has nothing to do with the version of
WindowsXP (service Pack or not, Home or Pro 'cos I tested them).
I wrote to the customer service but after some e-mail exchange I stopped 'cos they could not find the solution... I see now reading some posts that not only I have such problems... I think the solution could be small application extracted from the setup program installing the SB driver where we have the possibility to choose what kind of speaker we want to use... it's easier to use such application instead of deinstalling and installing with all the patches again or maybe somebody has better idea? Untill of course Creative engineers find the proper solution
Thank you for your patience
Greetings from Poland
DBWait for the next update. It is being widely accepted by most users facing this problem that 10.1.19xx and above has resolved the reboots issue.
Although I never faced this issue on any version, not everyone has been so lucky.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post. -
How to handle file on application server without coading?
HI all,
can anybody tell me How to handle file on application server without coading? Is there any solution?
Thanks in advance.> can anybody tell me How to handle file on application server without coading? Is there any solution?
what is that you want to handle. what you do if you don't code ... -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
How to display a file from Application server without downloading it to local drive
I want to dispaly a file from Application server without downloading it to my local system.
i tried the below method but it didn't work.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
APPLICATION = L_FILE
DEFAULT_DIRECTORY = L_DIRHi,
Use open dataset to read file from application server.
try like this sample code:
data : p_file like ibipparms-path.
data : rec(350) type c.
data: g_delimiter(1) type c value ','.
maintain the file path in p_file. then
open dataset p_file for input in text mode encoding default.
IF SY-SUBRC = 0.
do n times.
READ dataset p_file into rec.
split rec at g_delimiter into your internal table fields like it-id it-name it-age.
append it.
clear it.
enddo.
close dataset p_file.
Now you have the data in internal table it. -
I cannot install an application in the Applications folder without removing it first
For some time now, I have noticed that I cannot install an application into the application folder without first removing it from the folder. If I try to install it by dragging the icon to the application folder, I get a warning that the application can't be moved because the folder "Applications" can't be modified. I click on authenticate and enter the root username and password. I am warned that the application already exists in the location. I am asked if I want to replace the item. The options presented are "Keep both files", "Stop", and "Replace". I choose "Replace". I am then prompted for an administrator's name and password. I enter "root" and the root password. I then get this lengthy error message:
The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again.
I checked the permissions and "locked" was already deselected. The permissions grant my regular user read and write permissions, "staff" read-only, and "everyone" read-only. If I add "admin" with read and write permissions, nothing changes, i.e. I get the same error. If I try to enter my user credentials, they are rejected. My user is not an admin user. Previously, when I enterered the root username and password, the operation would complete successfully.
Now if I first remove the application from the Applications folder, then drag the application to the folder, I am prompted for an administrator's name and password. When I enter it, the application is copied successfully.
I have tried fixing file and directory permissions from the disk utility, but that doesn't fix the problem.When you say, "locked" was already deselected, I take it that you mean the small icon at the bottom right of the Get Info window displayed an open lock picture.
Have you tried locking it, then unlocking it again? I expect you will be able to lock it by simply clicking on the open lock icon, but to unlock it again you will need to supply an Admin password.
Odd that DU didn't fix it. That would be my first thought also. Suggest trying it again, if you haven't already done so.
Speaking of DU, have you verified your HDD?
My Applications folder permissions read -
System Read and Write
admin Read and Write
everyone Read only
Message was edited by: El Deanio -
CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you! -
I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .
Depends on what you had
If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
If you had any version of iPhoto '11 then you can install for free from the App store
If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
LN
Maybe you are looking for
-
Hi Experts, I have a client who want to print ECC nos information in AR invoice PLD . Pl suggest me query. Thanks Nitin
-
Is it possible to brust report using data template?
I fail to do this with many trials. Can anyone give me a guide? Thank a lot!
-
Show ip bgp not showing all BGP Paths
Hi, We've setup BGP as shown in the diagram. Now Router Router A and B are peers of each other. Router A peers with ISP A and Router B peers with Router B. The issue we have is that Router B knows how to get to router C via eBGP connection to ISP B r
-
How do I create a karaoke track from my ITunes in Quicktime Pro?
-
I bought photoshop in december and I can load organizer but it quits after 2 minutes consistently, 100% of the time so I can't use the application. It gives me the option to send a report to Adobe which I have done about 19 times but nothing happens.