My battery life on iPhone 4 with OS 5.0.1 is down to less than 3 hours...

Hi, I am completely frustrated over the iOS battery problem... i am getting a little bit over 3 hours on a 100% charge... My phone is extremely HOT inside and outside of the case... THIS IS NOT WORKING OUT FOR ME... This is also destroying the life of my battery.... Why am i not able to down grade my phone if the will solve my problem...I NEED HELP... I have been dealing with this problem from the day IOS 5 was released...
And its not my settings...
My brightness is down almost completely...
Location is off
notifications is off
Push is off for all related apps...
apps are completely off from running in the background... What am i to do now?
I now have a crippled phone if i can't use any of the features....
I have backed up and restored my phone more than 5 times hoping it will fix the problem.... IT DID NOTHING!!!!
Feb of 2k12 what am I do do??
HELP PLEASE!!!!
[email protected]
I have backed up and restored my phone more than 5 times hoping it will fix the problem.... IT DID NOTHING!!!!

I just got it yesterday I upgraded from blackberry they said I have 14 days but if I return it have to pay $35 overstocking fee

Similar Messages

  • I updated to 6.1.3 and now my battery runs down in less than 2 hours. I also cannot access email. It opens and then immediately shuts down. I have a 4s

    I updated to 6.1.3 and now my battery runs down in less than 2 hours. I also cannot access email. It opens and then immediately shuts down. I have a 4s

    After every iOS update there is a group of users that report battery drain issues.
    After every iOS update there is a group of users that report better than normal battery life.
    After every iOS update the vast majority of users that report no changes in battery life.
    Search the forums and see for yourself.

  • Battery Life on iPhone 5 with IOS 7.0.2

    Hi all,
    What's the average battery life on iPhone after the upgrade to IOS 7.0.2?
    I tried to put my phone (with 100% full battery) on Airplane Mode before I went to bed (around 11pm).
    When I checked my phone at 6.30am in the morning, it's only 1% battery left --> 7 hours on Airplane Mode???
    The next night, I put my phone on standby mode (Wifi on, Location Services Off, Bluetooth Off, 3G/4G off) same time (11ish)
    Next morning at 7am, 5% battery left --> 8 hours on standby with just Wifi On.
    I found it a bit weird because before the IOS 7 upgrade, if I put my phone on Airplane Mode, it will last for more than a day.
    Wondering if any of you guys has the same issue with the battery?
    Thanks.

    I received an iPhone 5 for Christmas and had an iPhone 4.S previously which had no battery issues at all.  The new phone is diabolical in terms of battery life.  I have done all the things that people recommend on here to try and extend the battery life but to no avail.  Just sitting overnight with nothing running in the background drains the battery considerably.   What else can I do?   I have AppleCare on this phone so the people there offer to replace the phone for me BUT the replacement phone does not arrive in a new box and the respresentative was very fuzzy about the fact he would/could not assure me I would receive a brand new phone in its' box.  He just kept saying it will be a 'replacement phone' which is totally unacceptable as this phone is unlocked so we paid full price for it.   The phone is not reliable - whilst out for a full day's ski-ing (I was not ski-ing, just hanging around!) and using the phone for very light Internet browsing and only a few short e-mails, the battery just drained away in front of my eyes so I had to turn it off completely as I have no car charger yet and certainly had not thought to take my electrical charger with me (we won't even talk about the stupidity of making the new charger not fit my other Apple products (three of them!).
    I really am so disappointed and don't know what to do next.   As BCCconvert asks, what can we do???  thanks for any help offered.

  • Any tips on saving battery life on Iphone 5 with IOS 8?

    I downloaded IOS 8 to my iphone 5 earlier today and the battery is draining at an alarming rate, down 20% in an hour and I only sent 5 texts.

    Lots of tips here:
    http://www.apple.com/batteries/iphone.html

  • How do I maximise battery life on iphone 5s

    I have just got an iphone 5s and the battery life is terrible. With my 4s I used to double click the home button then I could close down each app fully as they showed up in a row and I could press an x. I cant seem to do this with the 5s. Please help, its lasted 9 hrs since charging and I ve been asleep for most of them!!! I tried Apple support chat but after over 30 mins I didnt get a reply.

    To shut down apps double-click the home button then swipe the app screen shot upwards. However, very few apps actually run in the background.
    The list of apps you see when double-clicking the home button is only a list of recently used apps, it is NOT a list of all running apps.
    Battery life will improve over the next days and weeks as the battery is used.

  • HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

    I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

    Hi melvin victor,
    Welcome to the Support Communities!
    The information below may help you troubleshoot your iPhone battery issue:
    iPhone Battery and Power - Apple Support
    http://www.apple.com/support/iphone/repair/battery-power/
    Battery & power
    Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
    I hope this information helps ....
    - Judy

  • Exchange Outlook Push Not working, Battery life Tanking, iPhone heats up!

    I have seen several posts about this, but nothing that has been able to exactly describe my issue. I have a iPhone 3G on the latest firmware, 3.1.2. I was recently able to add my work exchange email to the phone and it worked fine with SSL disabled. At the time, we had not yet set up security on our OWA. Well that lasted about a week, then they decided to enable the security and since then, my push exchange mail with Outlook has not worked. I tried enabling the SSL feature on the phone and still no dice. As a result, my battery only lasts about 3 hours and the phone's physical temperature heats up. Once I delete the exchange account, the tempreceeds and the battery life returns to normal. I ahve been working closely with our IT guy and we can't seem to figure out what is happening and why it won't sync anymore. I get the error, "cannot get mail, the connection to the server failed" but in the setup, the exchange Account is verified. Any ideas?

    Hi, I have just run into the same issue. I was using ver 3.00 on my iPhone 3g up until last night when I upgraded to 3.1.2. Since the upgrade where my phone was successfully connecting to our Exchange 2k3 server and recieving push notifications for mail and calendar etc, this has now stopped. The result now being it will only pull mail on request.
    As mentioned in the post above, I have noticed the battery life on my phone has deteriorated significantly, to the point it only lasts a few hours, with almost zero usage.
    Please help.

  • Low battery life, heat or noise with Macbook pro? SOLUTION HERE

    Low Battery?
    Warm unit on Idle?
    Loud fan?
    Likely solution is here..
    I have a new 15" and had these issues, found the only working solution in the thread below, safe and easy to use. If you are worried do a
    time machine backup before doing this.
    Go here
    https://discussions.apple.com/thread/3191543?start=0&tstart=0
    Read post #2, put the command into your Terminal (Found inside launchpad)
           - That command is the following "sudo launchctl unload -w /Library/LaunchDaemons/com.citrix.agadminservice.plist"
    type password when asked ( you wont see any characters but it will be accepted when pressing enter)
    Restart, battery, heat and noise issue is completely solved, lion is fixed.
    You now have a very high quality product, that functions like it should. Macbook Pro still owns.
    Hope this helps everyone out.

    Same problem with shortened battery life here with 10.6.2 (2009 unibody 15" MBP 2.53 GHz.) Shutting down and removing the battery seems to have brought fully charged battery life back from less than 2 hours to over 5 again. Didn't bother holding down the power button with the battery out though.
    A few notes:
    1. Prior to the shut down + battery removal, I had noticed unusual warmth despite the CPU being only lightly loaded. Activity monitor showed no app using more than 4% of the CPU, with just a few apps running (Safari, Mail, iCal, Finder).
    2. Months ago, just a PRAM reset seemed to fix the problem, possibly with 10.6.1 or 10.6. Can't remember for sure. But PRAM reset doesn't help any more with 10.6.2.
    3. I have never reset the SMC.
    4. I don't recall this problem happening with any of the 10.5 releases. Just with 10.6.x.
    5. The bottom of the MBP's enclosure is cool again after the shutdown + battery removal.
    6. I am also running 10.6.2 on a 2008 aluminum iMac (20" 2.4 GHz) and haven't noticed any unusual temperatures, but it's much harder to tell. And of course, there's no battery life to measure.
    I'll see if the problem returns again, but it really seems like a Mac OS X problem instead of a firmware or runaway app problem. Maybe some daemon is stuck in a busywait loop or something?

  • What is the best way to maintain your Battery Life for Iphone 5 ?

    What is the best way to maintain your Battery Life for Iphone 5 ?

    hi,
    so what would you suggest to do here then. let it get to 50% then run the battery down and at say 5-%ish re-charge it fully.
    is there anything i could switch off on my phone to save battery power. ive taken off he location services apart from ym locate my iphone, stopped the fetch new data and set it to manaul . this is also the same for the icloud as well.more or less everything has been set to manual or set to off ??

  • Battery discharges on iPhone 5 in less than 24 hours.  Is this normal?

    Battery on iPhone 5 running iOS7.0.4 discharges in less than 24 hours.  Older phones held charge for a few days.  Is this an iOS problem or a phone problem?  How can I get longer battery life?

    This is being caused by Software, I hate to tell you this but  it could be caused by World of WarCraft.
    http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html

  • Hey,... My battery extremely drained after update the last iOS, My iphone must be charged less than 7 hour,.... How could it be?

    Hey,... My battery extremely drained after update the last iOS, My iphone must be charged less than 7 hour,.... How could it be?

    Hey,... My battery extremely drained after update the last iOS, My iphone must be charged less than 7 hour,.... How could it be?

  • Im updating my Iphone 5c with the latest apple update, but it isnt done after an hour... how long is it supposed to take?

    Im updating my Iphone 5c with the latest apple update, but it isnt done after an hour... how long is it supposed to take?

    Via iCloud on Wi-Fi about ten minutes at the most. Via iTunes, about the same.
    Reset your iPhone.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then tap Settings > General > About then scroll to Version. If it says:  7.1.2 then the update was complete.
    If not, follow the instructions for recovery mode >>  iOS: Unable to update or restore

  • My iPod Touch [gen 3] battery suddenly is lasting less than an hour.

    I've had my iPod since the summer of 2010.  It's worked fine up until the last week or so.  My original cord's white covering started to fray and you can see the silver wire protection, so I bought a new one.  That one worked fine, but then it started giving me a screen on my iPod that said "Charging is not compatible with this accessory."  And about three months ago, that cord just stopped working all together.  So, I switched back to my original after putting electrical tape on it and it charges with no problem now.  Well, now it's three months later and my iPod is suddenly only holding a charge for less than an hour.  I put it on the charger when I go to bed, and take it off when I wake up.  The only other time it goes on my charger is when it dies suddenly, or if I'm listening to it in my car because it charges it automatically when I plug it in through the USB cord to my CD player in my car.  But, I'm really ticked off that it's already breaking because it's only 2 years old, and I can't afford another one. 
    Does anyone know what could possibly be making my iPod die so fast?  I have notifications turned off of most of my apps, the only exception is Draw Something, Facebook, and Words With Friends.  I have my brightness at the medium setting.  And I've deleted a lot of apps this morning in case that was the problem.  I don't listen to music that often on it, when I do it's when I plug it into my car.  I mostly play games and stuff, but I took it off the charger an hour and fifteen minutes ago, and within 45 minutes I got the notification that I had 20% battery left. 

    1. Check the cycle count of the battery. It may be due for replacement.
    2. If not, follow these instructions.
    3. You can also try resetting the SMC.
    4. Make sure your system is up to date in Software Update.
    5. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • The battery of my MBA 13 "mid 2011 is lasting less than two hours after installing the Mountain Lion. Would be the OS or apps consumed much?

    My MBA is consuming the battery in less than two hours after I installed Lion Mountain. The update has already been done for some time. The problem of consumption would be the same OS, according to several complaints, or were inadequately apps consuming battery?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

    I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
    Do you have Verizon Fios Internet?
    Are you on the 20/5 connection?
    If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
    I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
    Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
    When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
    I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
    From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
    His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
    The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
    The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
    My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
    Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
    We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
    I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
    This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
    We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
    This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
    If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
    My contact information,
    I have left this out here, you can contact me on these forums...

    Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
    Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
    Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
    Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
    Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
    We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
    It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
    Just strange that one computer can effect all the other computers on the network, even when it is shut down...
    I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
    So now we have three choices,
    We can go back to Windows XP.
    We can buy a new NIC or a wireless card to replace the RealTek...
    Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
    Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
    Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
    Message Edited by keiser0619 on 08-06-2009 03:58 PM

Maybe you are looking for

  • How to restrict number of characters for an input field

    Hi All, I have an input field. The max number of characters for this input field is 10. when a user enter more then 10 characters. it should prompt for an error or the input field should not allow to accpet the 11 character. how we do this in VC. nee

  • How to create custom dictionaries in Adobe Reader

    I am trying to create a custom dictionary and use it in Adobe Reader. I found some information in a blog about the custom dictionary that is created and stored in the following location "C:\Users\PIN\AppData\Roaming\Adobe\Linguistics\Dictionaries\Ado

  • Receivables into two differents compny codes

    hi i have receivables into two differents company codes for example i receive from a customer advance payment in company code AE10  and the same customer still have open items in other company code AE12 so how to clear the payments received in AE10 w

  • [Prime LMS 4.2.5] "NMSROOT" The system cannot find the path specified

    Hi, I am in the midst to change the admin password for my LMS 4.2.5 using CLI Command. I stop the Prime Daemon Manager by typing "net stop crmdmgtd" in Command Prompt. But when I typed "NMSROOT\bin\perl", the message "The system cannot find the path

  • Input an electric guitar

    How can I input my electric guitar into the garage Band programm? When I input it I hear thru the Imac Mic, not with the USB input. I've an Imic. I also put the preferences thru the USb Imic, nut no sound... I try thru my Boss BR1200CD and with the R