My brother and I both have many problems with our playbooks.

First of all my playbook used to connect to my computer and I soon put all my music and videos onto my tablet, then for some reason it wouldn't connect, it shows up in desktop manager as connecting, my playbook says it is connected, but then it says that desktop manager could connect to the device and it doesn't show up as a drive, I have updated it, deleted everything and started again but it still will not connect. My brothers playbook has the same problems as the above but some of the apps don't seem to work anymore, they open for about 1 second then shut down, I am very disappointed as I have only had these since Christmas, I cannot find any help anywhere, so I would appreciate it if you could give me some.
Thanks Jack

Jack,
Here is a slightly different way to accomplish the same thing. Reboot your router before you start.
1. Setup and turn on all your equipment to run on your wifi network . On the PlayBook you want to get its IP Address and write it down on a piece of paper. This number can vary each time so it is best to get the info just before you start. On the PlayBook go to the settings Gear icon (top right of screen) and tap Storage and Sharing. Toggle on the WiFi Sharing. Remember to toggle it off when you are finished or you can set a password to keep hackers out. Then go to the top of the left pane to "About". In the right pane tap the dropdown arrow and select " Network". Go to the line IPv4 and write the IP address on a piece of paper. It should look something like this 192.168.0.100.
2. On your computer, click on Start, Click on My Computer. In the address line at the top of the page, clear it and enter two back slashes such as \\ followed by the IP Address of the PlayBook. So the line should look like \\192.168.0.100 and then press enter. In a short time it should read the directory of the PlayBook. Click Media and it will show all your subdirectories. At this point you can open the music directories of your computer and drag all the music you want over to the PlayBook. Place it in the Music directory. Pictures will go into the camera directory, movies to the video directory. Documents to your document directory.
3. If you transfer any music, at this point you can go to the PlayBook and try playing some music to see if it works. I have converted all my music to MP3 format on my laptop and then transferred it by wifi to my PlayBook. It will only allow you to transfer 5000 selections if I remember correctly.
4. You can exit your laptop and on your Playbook go to settings/ storage and Sharing and toggle off WiFi sharing or put a password on it.

Similar Messages

  • HT1473 My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud.  How do we do this?

    My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud.  How do we do this?

    No it is not possible.  Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

  • Both xp and windows 7 have video problems with my VGA connection using TV

    both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

    To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on  your router, right click on it and select "Map network drive" and click on finish.
    Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

  • HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

    I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

    I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

    You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours.  If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
    You can have as many AppleIDs as you want (or at least, as many as you have email addresses for).  You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
    You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

  • My wife and I both have Ibook G4 with OSX 10.5.8.

    Mine has a problem with loading and playing some Quicktime things like , Avi's off a cd/dvd, says its missing software, even though i have the same version as my wife, go to update and it say's its up to date? it plays the sound but does not show the video part. Also mine will not load my flip video software, say cant load this version on power pc? whatever that is.
    I'm thinking about buying Snow leopard family pack, is this a good idea to hopefully solve my issues and update both of our Ibook G4's?
    Thank you

    Install Perian. Snow Leopard won't run on an iBook or any other PowerPC Mac.
    (63320)

  • I would like to upgrade to the next step, but because I have many problems with the version 10.4.11, I'm worried that upgrading would create more problems.

    Due to a misunderstanding with [email protected] in September of 2010, many of my applications and important files were put into the trash during a cleaning.  The trash hadn't been deleted, so a CleanApp rep told me to drag my important files to a folder on my desktop.  They were unable to help me with anymore advice with the exception that if I followed the pathway of the application, I could manually restore it to its proper location. 
    This was asking a lot of me because I didn't have the experience or knowledge of undertaking such a massive restoration.  However, I did the best I could.  What had been put in the trash was not just a few files -- there were hundreds of files or apps that I discovered in the trash.  As I said, this was a misunderstanding.  I was left feeling devastated at what had happened. 
    Since then, my iMac Intel Core Duo has been running on its last legs.  I'm surprised I can even get to my email.  As far as using the software that I bought with my iMac, I can't.  I just do the basics.
    What I have been wanting to do is to upgrade to the next level.  However, I worry that if I upgrade a crippled OS X 10.4.11 Tiger, I would be creating more problems than what I already have.  Do you agree that an upgrade would make matters worse? 

    It won't necessarily make it worse, but may not make it better.  I am not familiar with the utility you usedm though anything that cleans or maintains your Mac should be avoided unless you know what you are doing and what it does.  Probably re-installing software from the official sources (download or CDs) is the best way to ensure missing parts are all replaced.
    If this is a core duo and not a core 2 duo then the highest you can go is Snow Leopard 10.6 Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).

  • I'm back in the states and i still have a problem with iTunes account

    While I was in the dominican republic I wasn't able to make purchases in the iTunes store.  I found out it was because I have a us account.  But now I'm back but it still is not working and everything I try to do make it work is not fixing the problem.

    This is in Google searches? I suggest clearing your Firefox cache and deleting your saved Google cookies. Or you might try just clearing the cookies first.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using either:
    * "3-bar" menu button (or Tools menu) > Options > Advanced
    * Firefox menu > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (classic menu bar) Tools menu > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • My husband and I both have user profiles on our MacBook Pro.  When he is signed on with his profile, he can see my gmail contents from his email account mixed with his email.  How do we separate our profiles?

    Why can he see my email but I cannot see his?  And how do I remove my email account from his profile?

    Does this mean you have to seperate accounts set up, and use fast user switching to get into your own user account?
    AppleMenu()>System Preferences>Users & Groups>

  • I have just done a c drive clean and now i have a problem with wed site, the background will not load and some web i get error massages

    Im using explorer to ask this question
    here a screen shot of ninemsn web site
    [http://example.com http://imageshack.us/photo/my-images/830/screenshot019ez.jpg/]
    one of the error massage i get,
    File not found
    Firefox can't find the file at http://www.raafsquad.com/welcome.htm.
    Check the file name for capitalization or other typing errors.
    Check to see if the file was moved, renamed or deleted.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • Why can't I manually bring up a new tab in Firefox 3.6.16? I have Windows 7 and didn't have the problem with other versions of Firefox.

    My question says it all. I click on the new tab button and nothing opens. Clicking on links will open a new tab if needed, or using "Open in New Tab." seems to work okay.

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Hello I have a problem with our HP1660 DeskTop printer. I tried to cancel the print an error occured

    It says its a desktop D1600 series and says its deleting the doc but its doing nothing

    Help me out to delete this doc that says its deleting but its not and also printer error

  • TS1717 my itunes store when i click on it gives me an error, i have no problem with our internet

    my library opens, but when i click on the itunes store, i get an error message

    What does the error message say? (Precise text, please. Include error message numbers if you're getting any.)

  • Problems with our copy of Adobe Acrobat 7 Professional.

    We have two problems with our copy of Adobe Acrobat proffesional which we have recently re installed back on the same PC following so we thought the relevant transfer activation instructions.
    The first is that when we first start the program with no file loaded Both Transfer Activation and Activate Acrobat are greyout out.   This in tiself is not a problem but it may have a bearing on our real problem.
    We have for a few years used Acrobat Proffesional successfully to sign released drawing files which have been 'printed' to a PDF file by a third party printer driver.   Recently though when we try to load any of this type of file the Acrobat menu stays greyed out and both Adobe Acrobat and the PDF file are listed in Windows task manager.  Acrobat is completely locked up and has to be exited via task manager.   If I load PDF files from other sources the abot symptoms accur only briefly then the program menus re activate and the PDF file disappears from task manager.  It is as thought our PDF drawing files are failing to complete loading.
    Does anyone know how I can find out if our copy of Adobe Acrobat Pro 7.0 is actually activated?
    Does anyone know what might have started to prevent out drawing files from loading.
    Thanks
    Chris

    Good point but this one does require activation.
    Our real issue is that if we load one of our own drawing filkes, even one previously edited or signed with no problems it now completely locks up Adobe acrobat and we cannot do anything at all in Acrobat.

  • I have a problem with my mac  i have too many  archives and programs and i want to delete all files and start at the begin my mac with out do format

    i have a problem with my mac  i have too many  archives and programs and i want to delete all files and start at the begin my mac with out do format

    I do not recommend reformatting your harddrive and reloading your software.  This is a Windows thing. On an older mac it may be difficult to find all your software again.
    Best to have greater than 2gig of free space.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (3)
    Buy an external firewire harddrive.
    For a PPC computer, I recommend a firewire drive.
    Has everything interface:
    FireWire 800/400 + USB2, + eSATA 'Quad Interface'
    save a little money interface:
    FireWire 400 + USB 2.0
    This web page lists both external harddrive types. You may need to scroll to the right to see both.
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    (4)
    Buy a flash card.

Maybe you are looking for

  • Moving Files NTFS (Windows) to external drive to Mac

    I have some files from a windows computer which has a hard drive format of NTFS. I need to get it onto my Mac which is Mac OS Extended (Journaled). I have an external hard drive that i use for editing videos with final cut normally. I want to know wh

  • Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard

    Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard error Http error 403 or 500 internal server error. I am using ubuntu mysql. a manual php script work fine <?php // open connection to mysql server $dbc = mysql_connect('

  • Family Base, wrong time

    I recently added the Family Base feature on my sons Windows phone because he kept going over the data limits.  I've also put time restrictions, 9 p.m. - 6 a.m. on weekdays but have been receiving alerts which show he is texting after 10:30 p.m.  That

  • Connecting XI to iHistorian

    Hi, I want to connect XI with GE Fanuc's iHistorian(stores the manufacturing data on realtime and historical basis) to send manufacturing data to SAP R/3 Please let me know any way of doing this. Regards, Suresh

  • Video slideshow

    I have a presentation of 20 slides. Each slide contains a full screen video of various durations I want to run the presentation in a loop, so once I hit play on slide 01 it plays it's movie for the full duration, then advances automatically to the sl