My brother and I will both be in Quito at the same time but staying in different hotels. If we both have facetime how would we call each other (over wifi of course)?
My brother and I will both be in Quito at the same time but staying in different hotels. If we both have iphones with facetime how would we call each other (over wifi of course)?
Hello ajs42548,
The article linked below details how to go about using FaceTime. In order to use FaceTime over Wi-Fi, just verify that you are connected to a Wi-Fi network prior to initiating the call.
iOS: Using FaceTime
http://support.apple.com/kb/HT4319
Cheers,
Allen
Similar Messages
-
my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back. -
how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.
Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer -
I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.
Try one of these extensions for multiple cookie sessions.
Multifox: <br />
http://br.mozdev.org/multifox/ <br />
Cookie Swap extension: <br />
https://addons.mozilla.org/firefox/3255/ <br />
Cookie Pie extension: <br />
http://www.nektra.com/oss/firefox/extensions/cookiepie/ -
The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?
Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received! -
My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.
Try going to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". If that doesn't work, you'll have to tap the ID, sign out, then sign back in with a different Apple ID for iMessage.
-
I have just signed up for family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?
hi, the app is not "shared", it works as if you bought the app twice with different accounts, only you paid it once. they should have 2 different villages since they're on 2 different devices.
-
I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.
Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.
-
My Airport Express wont allow both my computer and new Apple TV to be conected at the same time. In Network Preferences I have to manually connect my Apple TV and when I do then it disconnects my computer. When I go to Network Preferences to manually connect my computer it disconnects my Apple TV. Both cannot be connected at the same time. Whats the fix?
I've tried to set up the IP's manually, still doesn't work. In fact I get a message saying that there is another device trying to use my computers IP address of 00.0.0.0. Thats not my computers IP its my Airport IP. Then neither my computer nor my Apple TV can connect. I change things back to auto configuation its either the Apple TV or the computer which I have to change in Network Preferences. It even tells me that my computer is connected to my network in the status bar and in Network Preferences when it is not. I never had this problem with my old Apple TV (1st).
-
how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks
Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2. Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button.
-
is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
One day I was going to download music from my laptop to my ipod, I was able to download all the songs I wanted but later when I try to charger my ipod it wouldn't let me. The next day I bought a new charger but it still didn't charger. I try pressing the power And home button at the same time but it still wouldn't turn on or charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?
For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?
-
I am trying to record a basic guitar track while I sing along. I don't want my vocals to be recorded at the same time but the internal mic seems to be picking up the vocal and guitar sounds. I tried System Preferences, Sound, Line In - Audio Line Input. It seems to be a common problem in Garageband for the Mac, ipad and iphone.
for me it turned out that the jack into the iMac was loose. Once I fiddled with it everything worked okay
Maybe you are looking for
-
Why is my Macbook Pro so slow when I run VM Ware Fusion?
My Macbook Pro is very slow when doing normal tasks (Mail especially) and slows to a stop when trying to run VM Ware Fusion. I need to run this to run a work program and that is the only thing that I do with Fusion. Everything seems to come to a halt
-
Empty target message in 1 to n transformation
I am using a ccBPM to handle a 1:n message scenario. I believe I have done everything right: <li>I have created a message mapping where target message has an occurrence of u201C0..undboundedu201D. When I test the message mapping it works 100% and p
-
I have moved to Iphone from Android. Here is my biggest problem and I hope there is a solution. On Android there was an app called "Calendar Snooze" I need to find something that will accomplish the same thing on an Iphone. What the app did was, wh
-
Drill-through via Transparent Partition
Hi I am using Essbase Server and EIS 11.1.1. I have a ASO target cube which points to different ASO source cubes partitioned on dates. Each source cube has defined a drill-through report and this drill-through reports work fine if I access them direc
-
Initial Indexing Mode ( On / Off ) ?
Hello ALL We are trying to configure the queue parameters for <i>initial indexing</i> and <i>Daily update of index</i> . We are not able to see the <i>Initial Indexing Mode</i> parameter and for that we can set it up : <i> On</i> for initial index