My classic 80GB ipod wont turn on, wont restore, it says it may be corrupted and all it does is constantly beep when I attach to my laptop! Windows Vista, 32bit, new version of itunes, etc.. WHAT the ****!? What do I do!?
My 80gb ipod classic is dead! It wont power on, it wont restore, it constantly beeps and shows the apple logo then my laptop says ipod in recovery mode, may have to restore. I read all the other problems and they are similar to mine but have not found anyone saying the screen does not power on except to show logo and do not disconnect. The annoying beeping sound stops after a while, then absolutely nothing! Is the battery removable, what do I do?
I did that and then tried to log onto the Itunes again and a prompt came up and siad the Itunes file wasn't properly installed and it might be corrupted and I should retry it again.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?
Similar Messages
-
I get a message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." Please advise what I need to do to get around this issue - at the moment iTunes wont open up!
Hi did you ever get a solution to this problem? Having the same issue myself!
-
The error message was cd created on newer version of iTunes. If the disk was a audio cd it should not matter the iTunes version. I converted all songs on playlist to MP3 and then selected burn playlist and checked audio cd. This worked in itunes 11.0.5. Also itunes 11.1 will not accept the second disk on a cd audio burn. It just keeps telling me to insert a blank disk, no matter how many blank disks are inserted
I think that the operating system is 10.4.11 and iTunes isn't responding to this operating system. I cannot upgrade the operating system to a version any later than what it is as I think it would then go to Tiger.
10.4 is Tiger, and 10.4.11 supports the latest version of iTunes and QuickTime. So either the system isn't at 10.4.11 - your original post said 10.4.1 - or there's something wrong with the system in which case earlier versions of iTunes/QuickTime might well also fail to install.
Please confirm the version of Mac OS X that really is on the system and we'll go from there. -
I have to downlaod the new version of itunes. It tells me that my ipod wont work with the old version. If i download the new version can i transfer all my songs to the new version or will they not be able to?
As long as its the same computer, the new version should simply upgrade your old version with nothing else changed.
-
I downloaded ios6 on my iphone 4s. Now, to sync to itunes I need the new version of itunes. In order to download the new version of itunes, I need a newer OS. I am fine with downloading a new OS, but it says to download through the app store. My computer doesn;t currently have the app store. What should I do?
In order to get the App Store you must be running OS X Snow Leopard 10.6.8
To get there you must upgrade to Snow Leopard 10.6 which requires an install DVD
You can call Apple and ask them for the install DVD. It will cost $19.95 plus shipping
Once you have upgraded your Mac to Snow Leopard then you need to update it to 10.6.8
Then you will have the App Store you need
Backup first before you start any of the upgrade
Allan -
I can't install the new version of iTunes or delete the old version
i have a new iTiouch and can't load the new version of iTunes. it downloaded fine but said installation failed because the "older version of apple software update" or something like that. so, i uninstalled and deleted (or thought i did) all the itunes programs i could find and still get the same error message. i can download but can't install the 9.0.2 iTunes because for some reason it thinks i still have an old version of iTunes. How can i get rid of the old version? thought i got rid of it all. i did a search for all files relating to itunes and apple and deleted them but some how it still thinks i have an "old version". i need the new version installed so i can use my new itouch. HELP!
it downloaded fine but said installation failed because the "older version of apple software update" or something like that.
Download and install the Windows Installer CleanUp utility from Microsoft:
[Description of the Windows Installer CleanUp Utility|http://support.microsoft.com/kb/290301]
Now run the utility ("Start > All Programs > Windows Install CleanUp"). In the list of programs that appear in CleanUp, select any *Apple Software Update* entries and click "Remove".
Quit out of CleanUp, restart the PC, and try another iTunes install. Does it go through properly this time? -
HT1420 I cannot find anything using the new version of Itunes - where is the store menu ?
Where do I find the itunes store menu in the new version? I need to authorise my computer.
when I went to put music on it, I had to update my itunes to do so. when I did, bonjour cme up with an error message and wanted me to find the path "bonjour.msi".
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
My ipod nano 3rd generation is not recognized by my Windows 7 laptop when I plug it in under itunes latest version
Hi Matt00,
thank you for your response. I followed the steps you suggested, but still no luck. Is a the fact that I am using a notebook a problem? I have been doing more searching and it seems my HP Pavilion Notebook does not have a firewire port?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion 17 Notebook PC
iTunes 11.3.1.2
QuickTime 7.7.5
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxxxxx
Current user is not an administrator.
The current local date and time is 2014-08-23 22:37:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
IPOD (G:\), iPod nano (3rd Generation) running firmware version 1.0.3
Serial Number: xxxxxx
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 7.1.1
Serial Number: xxxxx
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
Suddenly I cannot open iTunes, the above message is what I receive. I have done a bit of trolling the web in an attempt to fix it, but still no joy, anybody out there......help,,!
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do? I have been attempting to move my Library to a newer MacBook Pro.
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Have old PC with Vista, loaded new version of iTune now I have DEP issue and iTunes wont load. Is there a way to download on old compatable 9.0 version of iTunes or is there a workable Dep fix?
You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac
-
Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????
I got that Exact message... I think I updated my version of iTunes and it worked correctly.
Hope this helps... -
just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
When trying to sync my nano 5th Gen i got a message saying there was a problem and to try uninstalling and reinstalling. I did this step by step, but when reinstalling i was presented with this message. 'The file 'i Tunes library .itl' cannot be read because it was created by a newer version of iTunes'. Any ideas what i can doto rectify this????
ThanksIf you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!
Maybe you are looking for
-
10.9.2 Spotlight - No 'Path' revealed in search results?
After upgrade from 10.6.8 to 10.9.2, when using Spotlight, there is no 'Path' when highlighting a search result like in 10.6.8. Can this be turned on or is that the way of 10.9.2? Thanx.
-
How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!????? Please Help!!!
-
Performance of mapping Oracle objects to Java classes
Hi, By retrieving some test data from Oracle database in a Java application, I compared the traditional JDBC/RDBMS solution to JPublisher-generated-classes/Oracle-object-tables solution. The underlaying Oracle database and the client environment was
-
In Firefox 30, how can I disable the Web Developer console?
I use a keyboard macro program. Its settings, however, are preempted by the Web Developer tools' shortcuts. Therefore, I either want to (a) totally disable the Web Developer console or (b) remove/reset the shortcuts used by it.
-
How to disable tagging when reading a doc in Acrobat 9 Pro?
I recently installed Acrobat 9 Pro, and it insists on enabling accessibility features when I don't need them. Whenever I open an untagged document for reading it starts tagging, which can be very slow for large documents. I found the option "Confirm