My client wants me to setup email address through BC. Please can someone advise me how to obtain new email addresses and manage it through BC? And sorry if it's been asked before...
Sorry, I'm new to BC and need to establish the best way to obtain and use new email addresses for my client. The site is created in Adobe Muse and I wish to host it with BC. THANK YOU!
You need to be on an upgraded BC plan to at least a webMarketing plan to be able to set up email with it. I don't recommend the BC email anyways. Here is a blog article I wrote some time ago on getting around the BC email limitations.
Similar Messages
-
Google everything has suddenly appeared and I cannot find an easy and understandable way to remove it
If you don't like "Google everything", why did you ''(or somebody with access to your PC)'' install the Google Toolbar extension??
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
.mac mail - I still use my .mac email address to access itunes, icloud, etc. Every once in a while, apple sends me confirmation, reservation, etc. emails to the .mac address. Can someone tell me how to access that email account?
Hi pjerl,
Depending on when you originally set up your Apple ID, you may have @mac.com, @me.com, and @icloud.com email addresses associated with your account, but all mail sent to those addresses should still come in to the same iCloud account (you can test this to make sure by sending yourself emails at those addresses). You may find the following articles helpful:
iCloud: About your @icloud.com, @me.com, and @mac.com email addresses
iCloud: Using your @icloud.com email address
Regards,
- Brenden -
Please can someone tell me how to save a MP3 file from my email on my iPad so I can put it on Faceboo? I use hotmail and please tell me step by step as I am not a tech guru lol. Thankyou
Hi jscher200,
Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies! -
I have just changed my ISP and they have informed me that i have to change the IP address on my time capsule. Please can someone tell me how todo this? Thanks
This should really be unnecessary but anyway..
If you mean the internal IP of the TC, the it can be changed by changing the dhcp settings.. which is weird.
It looks a bit different in the v6 utility but is easy to do..
See the DHCP beginning address is split into sections.. change the front section from 10.0 to 192.168
Then update the TC.. then you will need to change everything on the network as the IP will need to change.. I recommend you simply turn everything off and then on again in correct order.. modem.. TC.. clients. 2min gap. -
Since upgrading to 4.0, my email settings have been changed so that the reply cursor appears at the bottom of the sender's message instead of the top. I hate this change - please can someone tell me how to change it back?
This is a carrier feature.
Contact your carrier -
I purchase a new iphone. I backed up my old iphone and moved the data to my new iphone. My new iphone shows my emails twice every time a new email comes up. How can I correct this issue?
Just to make sure - You're saying you had backed up your iPhone 4. When you plug in the 3GS, and try to "restore" the data from the iPhone 4 backup onto the 3GS, you get that error? Check to see if the iOS version is up-to-date, and hopefully it isn't. It might also be because your iPhone 4 wasn't, and is causing some sort of problem.
Good luck! -
Battery -- sorry if it has been asked before
Hello
I have searched the forum but can't find the answer, how long does it take to recharge your battery when you have plugged it into your PC?
thanks.....
I have the 30gb ipod (just incase you need to know)
xor actually..i dont think u can..but im not sure..cause if u listen when its charging, it will probaly take like 6 hours for it to recharge or something...or the batterie becomes bad..
-
Just got Airport Express to save on GBs of data. I have already a Westell 6100G which is for use as Internet Broadband, via Verizon. How do I set up the Airport Express with this Westell. Do I even still need the Westell, or do I need to also buy a wireless router? I'm a tech idiot and this is driving me nuts.
The Westell 6100G is a combination modem and router or gateway device. The AirPort Express is a wireless router.
Since the Express does not have a built-in modem, you will still need your Westell gateway in order to access the Internet.
Which exact model of AirPort Express do you have. It will be written (in very hard to read type on a label on one of the AirPort's sides). It should look something like: A1392. It may also state a Order#. In that case it would look something like: MC414LL/A
Regardless of which model you have, the basic network configuration would be that you would connect an Ethernet cable between the Westell's Ethernet port and the WAN (circle of dots) port on the Express. (Note: If you have an earlier model of the Express, you would connect the cable to the only Ethernet port on the Express.)
The good news is that you will not have to make any configuration changes to the Westell. We should be able to use it as configured.
What we are going to start with is getting a basic Wi-Fi network that should provide your computer with wireless access to the Internet. Once verified as working, we can fine-tune this network to include wireless security and any other goals that you may have.
Ready to start?
I would recommend that you do the following as a minimum:
Power-down the Westell and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the AirPort Express base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
Once the reset has completed, remove the AirPort Express from power.
Connect an Ethernet cable between the Westell and the AirPort Express.
Power-up the Westell; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I am having problems with my ipad. I receive emails from 2 seperate accounts one exchange account and the other from BTyahoo.
The exchange account emails stay on the ipad but the btyahoo ones disapear after about 1 hour can anyone help.To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)
Just use the same ID.
These may alos help:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities -
Can someone tell me how to expand all email messages in mail 5.2
as a default, so that my conversation is not strung together?
I'm missing messages becuase I cannot figure this out....
tku!
patHi there, see if this helps...
http://kb.earthlink.net/case.asp?article=137970 -
when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!
Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop -
I have had to purchase a new computer, as my last laptop died!! I have tried to add music onto my iphone, and my childrens ipod touch's, but its looking like it will clear their memory completely. Please can someone advise me what I need to do. Many thanks.
See iTunes: How to move your music to a new computer
BTW this list os for discussing the list itself. You'll get better response to questiosn you post if you post them to the correct list. I'll ask to have this moved to the iTunes list.
regards -
my apple ID is showing someone elses email address and not mine so when i want to buy or update apps it brings this other email address up. please can someone help how do i put it back to my email address?
First go here - https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and login under the manage tab. Check your information and be sure it is all correct.
An AppleID is nothing more than an email address, so if you see another email address in the store, then someone has logged in with a different AppleID than yours. Did you let someone else use your iPhone?
Maybe you are looking for
-
New to Macs, Question about media players
Hi im new to macs we have a macbook air, whats the most popular media player everyone uses for avi,mkv and mp4 files? also im looking to use this to watch shows and movies at times and i was looking for a remote control hardware or app that will let
-
I'm sure this has been asked before, but I have anxiously been awaiting the release of CS2 assuming that Adobe would integrate photoshop album features into it as they have done with PSE3. I was very disappointed to see that Adobe has still not consi
-
T450s and docking stations : don't understand differences and limitations
Hi, As you may have seen in my previous posts, I leave my previous company and my good old X220. So I am really wondering if I upgrade or not to the new T450s, or if I search for a X220/X230/T420s/T430s refurbished. One of my main concern, is the tot
-
CS5 64 bit does not support TWAIN
I am running Win 7 64 bit and just upgraded from CS2 to CS5. CS5 cannot see my scanner (Canon 8400F) even though Canon has a 64 bit driver that I installed. After downloading and installing the TWAIN plugin I spent several hours trying to figure ou
-
Are the Panorama and HDR features not supported in LR 5.7.1? I installed the update, but they do not show where the tutorial shows below Photo/Edit In.