My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?
My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?
Hi sayla,
When you reloaded your software did you do a clean reload (deleting all data)? http://bbry.lv/bpv7DT
If so, you might try doing a resettofactory using the following instructions. http://bit.ly/fMW9I4 This will reset to factory default.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
please help me!
- Have you tried resetting the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to computer and if it shows in iTunes restore.
- If screen is still on, let the battery fully drain. Then charge for an hour and try the reset and retore again. -
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
-
Installing lates itunes version to my Windows 7 g4 bit laptop but i always come accross with the error ???????? in the middle of installation. Then it will roll back everything and wont install at all
What does the error message say? Precise text, please.
-
I'd like to know how to permanently increase the type size. I use the Control + to increase the size, but it always goes back to the original setting when I go on to something else.
== This happened ==
Every time Firefox opened
== AlwaysIf you need to increase (or decrease) the font size on websites then look at:
Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
NoSquint - https://addons.mozilla.org/firefox/addon/2592
See also http://kb.mozillazine.org/Zoom_text_of_web_pages -
My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?
This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software) -
I am trying to update iTunes and keep receiving the message "The folder path "My Music" contains an invalid character.
The folder where everything is stored isnt even called My Music, it is just called Music.
I gave up on trying to update my itunes and removed it and am trying to re-download but receive the same message. Now I have no itunes on my computer at all.
Short or wiping my computer and starting again I have no ideas left.
Please help!That message isn't referring to the location of the music, it's referring to the location of the iTunes programme.
So the message is either referring to the download location or the folder it is trying to install the programme in. I think (I wouldn't put money on this) that invalid characters will be things such as * ^ % and so on. When you get the message, look for the location that your computer is trying to use. Are there any strange characters in the "file path" that your computer is using? -
Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I tried to update itunes and now my ipod won't work. What's wrong?
I tried to update itunes and now my ipod is not recognized in itunes or on my computer. It will only show a picture of the usb cord going into itunes and it won't do anything else. How do I make it work and what happened?
http://support.apple.com/kb/TS1538
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have an iPhone 5c. Just started having trouble texting certain numbers. They receive them(most of them) but then it comes back to me saying not delivered. Also, their texts to me are delayed, anywhere from 4 to 12 hours.
iMessages. I have gone into settings and turned off iMessages for one minute then reactivated it. Then I turned off network settings and then back on again. Today I'll try and restore the phone again to see if that works. Frustrating!
-
I have tried numerous time to update iTunes to version 11.1.4. It has failed every time. Now I can't even get into iTunes on my PC. The message I get is "This application has failed to start because MSVCR60.dll was not found. Re-installing the application may fix the problem." Okay. Which application? What steps are needed for this process?
Also, I get this message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" Could someone please assist me in the steps necessary to remedy this issue. Thanks.For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hi, I am trying to get help with an update install of iTunes. When I opened iTunes the other day, it told me there was an update to version 10.6.1. When I tried to install this version I received the following message " The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found. I tried running Windows fixit, but this did not solve the problem. Can anyone tell me how to finish uninstalling the old iTunes file, so I can reinstall the newest version? Any help would be greatly appreciated. Thank you.
Regards, Paul" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I use 1 Icloud account with 2 devise but the other devise arrest out my devise throue find my iphone, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?
Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh -
What is firmware compatibilty? Trying to updated iphone 4, and the message I received was unable to update due to firmware compatibility
From another post (but has your phone been jail broken?) -
Delete your .ipsw file(s) and try updating again (this re-downloads iOS 5.1.1). You will find the file(s) at one of the following locations:
Windows XP : Documents and Settings\<User>\Application Data\Apple Computer\iTunes\iPhone Software Updates
Vista/
Windows 7: Users\<User>\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
Mac: ~/Library/iTunes/iPhone Software Updates -
Can anyone advise why I am getting this error msg? I have the latest version of itunes and my mac software is upto date.
Many Thanks xxI am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.
Maybe you are looking for
-
Can my wife and I sink our iTunes to both our iPhones through iMatch?
Can my wife and I sink our iTunes to both our iPhones through iMatch?
-
How to create read only properties in a component?
I want to set a property in a nucleus component of global scope as read only, so that it cannot be set via dyn admin. I want this property to be set only via properties file at server startup. I tried removing the setter method as suggessted in the g
-
Not applied Patch 5117016 after 10.2.0.2 patch set.
Hi , database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016.
-
Please tell me the procedure .
I am using eclipse IDE. I see a.java and b.java file in my eclipse IDE. Now i put c.java and d.java in the same physical location side by side to a.java and b.java But , i dont see those in the eclipse IDE !! i want those files inside the IDE...what
-
Ok, i was making smart albums after upgrading to iphoto 11 and see camera type. Cool make smart album with photos sent by a friend. Problem, the canon 5d is not listed. Anyway to add it to the camera types for iphoto?