My dock gets messed up when the display changes

I have my dock on the left-hand side of my screen. At my desk, I keep my MacBook Pro closed, and I use an auxiliary screen. If I take my Mac to a meeting and then reconnect to the screen, the dock freaks out: The little "application open" ligts stay where they were, but the icons slip farther down the screen. Is there any way to get the display to refresh, so that the dock icons find their way home?

Hi bigd2k10,
First, force your iPod into disk mode, and connect it to your computer. See if it is recognized that way.
If it isn't being recognized, then see these articles:
iPod missing in "My Computer" or in iTunes for Windows
iPod is recognized by Windows but not iTunes
iTunes 7 doesn't recognize iPod
If you can sucessfully get your iPod recognized in iTunes, then I would suggest that you try restoring your iPod. For info on restoring, see:
Restoring iPod to factory settings
If that doesn't help, then see if this post by Da Gopha helps:
Da Gopha: iTunes displays a "corrupt file" error message
-Kylene

Similar Messages

Why does my email address get messed up when people hit reply sending from Mac Mail 4.6

Why does my email address get messed up when people hit reply sending from Mac Mail 4.6
OSX 10.6.8

I talked to our email provider and they say it has to do with the way thre recipients email address book has recorded the address. They say that they need to fix the address on their end.

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

No video signal in remote connection with Mac mini when the display is off

No video signal in remote connection with Mac mini when the display is off

So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

TS3700 I am facing this issues that music stops playing when the display goes...Please help me with this...:)

I am facing this issues that music stops playing when the display goes...Please help me with this...:)

Did you see the article linked at the top of this page?
iPod nano (6th generation): Music stops when display turns off
B-rock

I can't get on line when the message "Blocked plug-in" appears.

I can't get on-line when the message "Blocked plug-in" appears. How do I get rid of this?

If you actually can get online on some websites in Safari, but are unable to view the websites that depend upon the use of Adobe Flash Player, such as YouTube, then the problem is an outdated Adobe Flash Player version, and you need to update it.
, System Preferences, Other, Flash Player, Advanced, Updates, Check Now
(This screen shot is from OS X 10.8.5, so it might appear different than your OS X 10.6.8 screen, and a different release of the Flash Plugin might be installed.)

TS3700 My ipod stills pauses when the display turns off, even though, my headphones are correctly attached (or flushed)

My ipod stills pauses when the display turns off, even though, my headphones are correctly attached (or flushed)

Does this happen still when you use another set of headphones? Have you check to make sure the headphone jack is clean and clear of debris? If so, the jack may be faulty or damaged meaning you'll need to take or send your iPod in for service/repair.
B-rock

How to deal with the situation when the database change into ms-sqlserver ?

Hi,dear all,
How to deal with the situation when the database change into ms-sqlserver or other database?
Now, i want to build a j2ee project with ORACLE ADF bc,but this project may be used in several diffrent databases for example oracle db,ms db,mysql and so on.however,if i have developer this project in jdeveloper and this project connection was config as a oracle database,and then,can this project be reused for other databases espasially including the model codes? if yes,how should i do?
all who know how to resolve this,tell me pls,thanks.
bruce Li,
China
Message was edited by:
user526724

Hi Paulbin,
Do you want to supply a function-pointer to a DLL so it can call[back] your VI? Here's how it can be done with .NET, though, that solution requires a C compiler. A single "VI_to_function-reference" utility could handle all cases where the callback passes no parameters. Maybe someday somebody will share that dll.
Did you know that LabVIEW can use Events for some COM-signals change? See pic. (Note: DTR is not listed - - )
Another question is another function's prototype is WORD SetTestType(WORD comHandle, bool type1, bool type2, bool type3), I tried to use a boolean control and a Boolean to (0,1) node in labVIEW to pass parameters to CLF, I config the bool input value as U8(according to C++ bool type) and U32(according to WIN32 BOOL type), it dose not help, when I execute the VI, LabVIEW will be disappeare, it seems to be closed, I must start it again.
Could someone has similar experience on this points?
It's easy to crash LabVIEW misusing CLF - maybe there's another reason for the crash besides bool mis-match(?) Do you know which "Calling convention" is required? What type is comHandle? (where does comHandle come from?)
Cheers!
Message Edited by tbd on 03-23-2007 09:34 PM
Message Edited by tbd on 03-23-2007 09:35 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
evt.jpg ‏7 KB

Update manager in IdM automatically when the manager changes in SAP HR

Hi Experts
I have been given a requirement where the manager of a user in IdM should be updated automatically when the manager changes in SAP HR.
The HR extraction job is currently in place and runs every 30mins.
Please could you give me some ideas on how to implement this.
IDM 7.2 SP 6
Thanks
Ran

Hi Deepak
I have been discussing this a bit more in detail with the client. So, the issue is as follows
When a new/replacement manager is hired
When people are moved from one org unit to another
The scheduled extraction job (RPLDAP_EXTRACT_IDM with a variant with the delta tick on) does not update the new manager info in IDM for the relevant users who report to that manager. The client has to run the program (RPLDAP_EXTRACT_IDM with a variant with the delta tick off) manually each time for the affected users which updates the manager info successfully in idm.
I investigated the query LDAP_IDM_QUERY from user group /SAPQUERY/L1 and want to know if the below should be ticked as well. Your thoughts please?
Please advise.
Thanks
Ranjit

[svn:fx-trunk] 11112: DatGroup and SkinnableDataContainer dispatch a " dataProviderChanged" event when the dataProvder changes.

Revision: 11112
Author:   [email protected]
Date:     2009-10-23 12:35:31 -0700 (Fri, 23 Oct 2009)
Log Message:
DatGroup and SkinnableDataContainer dispatch a "dataProviderChanged" event when the dataProvder changes. Fixed a ScrollerLayout typo.
QE notes:
Doc notes: none
Bugs: sdk-23489
Reviewer: Ryan
Tests run: DataGroup
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23489
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/SkinnableDataContainer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ScrollerLayo ut.as

Sales Order Updation when the delivery changed

Hello Experts,
                       I am working an object where I need to update the sales order when the delivery changed.
                         Actually when the remote system rejected the delivery an IDOC will come to R/3
Sooner the delivery changed in R/3 I need to update few fields in sales order.
          When I am trying to code in the exit in the FM attached to the IDOC it is first updating the sales order and calling ws_update_delivery next.
Even if I am trying in mv45afz1 also same thing is happening.
          Can anyone let me know how to solve this problem.

Hi,
you can see the work center capacity situation for manufacturing an item in the salesorder. But it needs Assemble to Order strategy. Anyway u can see the material details in the sales order.
Kiran.

When the state change, my StyleableTextField html formatting is lost

Hello,
When the state change, my StyleableTextField html formatting is lost (mobile project)
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
          xmlns:s="library://ns.adobe.com/flex/spark"
          addedToStage="ats(event)">
          <fx:Script>
                    <![CDATA[
                    import spark.components.supportClasses.StyleableTextField;
                    protected function ats(event:Event):void
                              StyleableTextField(txt.textDisplay).htmlText="<i>test</i>";
                    public function ok(e:Event):void{
                              currentState = "state2";
                    ]]>
          </fx:Script>
          <s:states>
                    <s:State name="initialState" />
                    <s:State name="state2" />
          </s:states>
          <s:VGroup>
                    <s:TextArea width="100%" id="txt" includeIn="initialState, state2" skinClass="spark.skins.mobile.TextAreaSkin"/>
                    <s:Button label="add" click="ok(event);" includeIn="initialState, state2"/>
                    <s:TextArea width="100%" text="state2" includeIn="state2"/>
          </s:VGroup>
</s:Application>
Thanks

How are you doing this?
The text area of a web app has HTML encoding and is all fine.
If you make a multiline custom text field the encoding remains.
You need to provide a bit more information because the above do keep their encoding.

How to catch an event when the user change values in the project information dialog

hi,
i would like to know how to catch an event in my C# code when the user change values in the project information dialog?
taskChange doesn't catch these changes.
thanks.
Thanks, Sharon.

You need to write save button event handler for project information dialog. Link is having same functionality described.
http://blogs.msdn.com/b/husainzgh/archive/2011/08/01/hooking-into-the-project-detail-page-ribbon-save-button-without-overriding-out-of-box-functionality-in-project-web-access-for-project-server-2010.aspx
http://www.projectserver2010blog.com/2010/01/sharepoint-2010-webpart-client-server.html
kirtesh

The Sound stop when the movie change

Hello,
I am doing a Director movie that calls another movie.
How can I do to the sound do not stop when the movie
change?

Chrome has its own Flash Player plugin called "PepperFlash". It functions independently of the ActiveX plugin for IE. ActiveX causes more problems for IE than it will ever solve... and for that reason, I don't use Microsoft's pathetic excuse for a browser. It's pure garbage.
I recommend using any other browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Webcam on Envy 14 Beats only detects when the display is at a certain angle

HP Envy 14t-1100 CTO beats edition
Windows 7 64
"No webcam detected" using HP MediaSmart Webcam, webcam not showing under imaging devices in device manager
I've had my Envy 14 Beats for about 9 months, when I got it the webcam worked just fine. A few months ago I started noticing that when I tilted the display forwad or backward I would hear the alert noise for when a usb device is unplugged, at the time I didn't think much of it.
Just recently I went to use my webcam with the MediaSmart app and got the error message "No WebCam detected, try plugging in your webcam... yada yada." So I went to the device manager to see if there was a driver issue, to my surprise there was no "Imaging device" category. I scanned for new hardware, nothing turned up. While re-adjusting my sitting position on the couch I tilted the display screen slightly forward, and to my surprise the device manager list refreshed and suddenly the "Imaging Device" category was there with the webcam listed. I let go of the display (I was applying a small amount of pressure tilting it forward) and the usb disconnect noise beeped and the webcam disappeared from the device manager...
After a little more pushing and prodding I was able to reproduce the effect. If I have the display at a slightly larger then 90 degree angle (100 degrees-ish) and then put a little pressure on the display tilting towards me (going from ~100 degrees to ~97) the webcam will show up in the device manager and works like there's nothing wrong. If I let go of the display and let it sit open unassisted I get the disconnect system noise and the webcam and imaging device categor disappear from the device manager. I'm guessing there's a loose connection in the wiring that connects the display screen to the main body of the laptop.
My question, then, is what can I do about it? Obviously me holding the display in order to use my webcam doesn't fly, but am I going to have to send in my laptop for repair? I bought the laptop in early december of 2010 so it's still under warrenty. If I do have to send it in, will they wipe my hdd?
Any ideas or suggestions would be very appreciated, I know this is a wierd one, but that's just my luck I suppose.
Thanks!
-Jake

I have the exact same problem. And I went through it twice. The first time I had this problem, I tried to work around by tilting the display to a certain angle, but eventually the webcam stopped getting recognized and after talking to the customer care and trying system restore and even factory reset, I had to send the laptop for warranty repair. This time I noticed the problem while using Skype or Google video chat. Whenever my video is on i.e. the webcam is working, my microphone picks up a loud noise which goes away when I switch off the video. I got the same effect in HP MediaSmart webcam program too. After a couple of month like this my webcam eventually has stopped getting recognized again.
Calling customer care would only result in suggestions of system restore/ factory reset when I know that the problem is in hardware. I believe the webcam connection is very weak to handle the display tilting. I have searched the web and have fond many similar problem reported by users.
I paid a premium for this laptop a year ago and I am surprised to find the same problem getting reported even now! Hope HP works on remedying this shoddy piece of design!

My dock gets messed up when the display changes

Similar Messages

Maybe you are looking for