My DVD Player hangs when trying to change the regional code the first time

Hello,
I am new to this forum and I couldn't find one for the DVD Player specific so I chose this one. Please direct me to a different one if my eyes were misleading me.
I have a new Macbook. Just over three month now and I attempted to watch a movie with the DVD Player last night the first time. When inserting the DVD, the DVD player comes up with a Screen asking me to change the Regional Code from 6 to 1. I don't understand this in the first place since I purchased my Mac within the US. But anyway, When I unlock it with my password and then click the "Set Regional Code" Button (Regional Code preset to one at this time), it turns blue and then the rainbow wheel for being busy shows up. Unfortunately it never leaves and going to the activity monitor it says (Not responding). That causes bad Windows Memories .
Tried multiple ways, let it run for 10 hours and it never returns to the world. Very frustrating, since this is the first time I tried to use this feature.
Is there any advice on how to set this to Regional Code 1. I only have to set it once, but I think there must be an option.
And yes, I know of VLC, but I still would prefer to use this regular DVD player. I think this should work somehow.
Computer out of the box, nothing other then iWorks and MS Office 2008 installed.
Any help is appreciated.
Thanks a lot
The Dark Lord
Bernd

Does the account you are using have admin rights? I found this :
http://support.apple.com/kb/HT2397
+In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
Sounds like it might be worth a try from an admin account first.

Similar Messages

  • Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup

    Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup. I get the rotating beach ball cursor for hours but not get the confirmation dialog known from 3.4.2 aksing whether I really want to back up.
    On old Mac Mini with OS X 10.6.8 and Aperture 3.4.2 there was no such issue.

    Creating a new vault and populating it always works but then turning around and updating that vault hangs? The drive is formatted OS X Extended, correct?
    That is strange. Before abandoning vaults, they should and do work in 3.5.1, I'd try this
    Run a library repair on the library. I always do this now as it seems to cut down and hangs when updating a vault.
    Before starting the vault update open the Aperture activity window Aperture->Window->Show Activity.
    Now do the update.  I can't give you anything specific to look for, just try to get an idea of where the hang is happening (if it happens after the repair).
    As for rsync, it should work OK but keep in mind as a lot of the data now in 3.5 is in database files any change to Aperture will result in reync seeing a lot of files has having been changed so I'm not sure now much of a savings that will be over just copying the library. To be honest I've never tried rsync on an Aperture library so this may not be an issue but something to keep in mind. BTW do you have much rsync experience? It can be a bit of a bear to setup if you're not familiar with it.
    Another option is to look at one of the cloning programs Carbon Copy Cloner or SuperDuper. They have the ability to make clones and then update only the changes since the last clone operation. In reality, I believe one or both actually use rsyn as the backend but give you a much nicer way to set it up and schedule it.

  • LabView hangs when trying to load the same VI with a different user logged onto Win2k

    When 'User A' is logged onto Win2k, a particular VI loads and runs fine. When 'User B' logs onto the same Win2k box, LabView hangs when trying to load the VI.
    I'm also not seeing the setup channels in the Data Neighborhood in MAX when logged on as 'User B'. I tried loading the configuration when logged on as 'User B' that I think is being used for 'User A', but nothing happens.
    Where are the configuration files (of whatever type) that tell LabView which user is logged on?
    Thank you!

    There are no configuration files that tells LabVIEW what users are logged on. It is Win2K permissions settings that allow different users access to different folders and applications. Try changing the permissions for the LabVIEW folder and see if that doesn't fix your problem.

  • Lenovo Vibe X2 keeps hanging when trying to pullup the contacts or when opening the SMS function !

    Have been using the Vibe X2 since 2 months. Phone keeps hanging when trying to pullup the contacts or when opening the SMS function. Terribly dissatisfied with the functioning. 
    *Moderator note:Message edited for a better understanding of the problem/ compliance with the Lenovo Community Participation Rules 

    Solved, I found the option there:
    Contacts - local menu - More features and settings - More display options - Matching digits of number - 7 digits
    Works great now,
    Regards,

  • I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

    I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

    In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • Hi there, I updated to ML about 3 weeks ago I can not get in to my apps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any sugentions how to go back and

    Hi there, I updated to ML about 3 weeks ago I can not get in to my pps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any suggentions how to go back and change that part or do I have to download it again.
    Thanks
    GeeRic

    To set up iCloud, open System Preferences > iCloud, and follow its steps to use iCloud

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • How can I delete photos from my ipad that came in when I connected for the first time to my pc?

    how can I delete photos from my ipad that came in when I connected for the first time to my pc? HELP

    Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced -  and then re-syncing.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Photos Tab on the right.
    If you want to remove all of the Photos - uncheck the Sync Photos from Heading
    Click on Apply in the lower right corner of iTunes
    If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
    http://support.apple.com/kb/PH12313

  • Laptop 'hanging' when trying to change background picture

    Hi
    I've tried to change the background picture under system preferences - desktop/screensavers. When I tried to select a picture from my iphoto-folders the system hung and won't come back at all until I shot it down with the on/off button. I wasn't even able to do a forced quit...
    Did somebody encounter this as well?
    It actually worked fine again after a restart, but still I think this a strange behaviour.
    Mac Book Pro   Mac OS X (10.4.7)  

    If I can jump in here, Jason is asking about background applications of which there are several always running. You can check this by opening Activity Monitor (in Applications> Utilities).
    Changing pictures is affected by a number of other applications, including (oddly) the Dock.
    When you selected the picture, was it in one of the Original or Modified folders? Try copying the picture and moving it to a separate folder in the Pictures folder and selecting it again.

  • Error when trying to change the Query in Bex??

    Hi Gurus,
    I have a query based on infocube. When I am trying to change the query, its giving me the error "This component was edited with a more recent version of Editor. You also have to use the more recent version to edit further. Further processing not possible. Update your front end".
    Please help with this.

    Hi, I am actually stuck here. Can you please let me know which among these is the higher version.
    1) Final Release 3.50
       Version 3500.3.016
    2) Final Release 3.50
        Version (Revision 481)
    Because it is working fine in the 1st one whereas its throwing that error pop-up in 2nd one(as soon as we select the Change query global definition option) .

  • System preferences freezes when trying to change the date

    Hey guys,
    I've got a MacBook Pro running OSX 10.4.1. I'm having a problem with trying to change the time/date settings. Either going through the system preferences window or accessing it through clicking the clock in the top right and then 'open date & time', I get the spinning wheel and System Preferences crashes. Any ideas why?
    Regards,
    Phil

    You are probably running 10.4.10 in as much as the MacBook pro's came out well after 10.4.1 was released. In any case try deleting the file com.apple.systempreferences.plist in your user/library/preferences folder.

  • I am trying to change the display time in Captivate 5...

    When I try to shorten the length of a slide either in properties or by clicking the end and dragging it, like in Captivate 4, it keeps going back to the original time.  Normally I record a demonstration and when I am done adding the effects and the voice I have to shorten or lengthen a slide, but I am unable to do this in CP5.  Please help.

    Hello,
    If the slide is longer than 3 sec you can change the 'Display time' in the Properties panel, General section too. But here you cannot get below 3 sec. Dragging in the timeline allows me to go below 3 sec, but you have first to shorten the timeline of the objects before you can change the duration of the slide. To be sure I just tried again and was able to get to a minimum time of 0.1 sec with that workflow. In the screenshot it is 0.3 sec. If you have FMR, video or audio however the duration of that object will be responsable for the duration of the slide.
    Hope it works for you too, cannot explain why it is not possible with the Properties panel, which will show correctly the duration after you changed it with the Timeline.
    Lilybiri

  • Time Machine: Repeated errors when backing up for the first time using a new external firewire drive

    My Iomega 500GB firewire external drive failed on me last week and I have just replaced it with an identical model. I used to use the old drive with Time Machine on my MacBook Pro running 10.5.8 with no issues, until the drive had a hardware failure and stopped spinning up, hence the replacement.
    Two days ago I tried using Time Machine for the first time with the replacement external drive. The backup failed and each subsequent backup attempt has failed since then with a different error each time. The drive cannot be ejected using Finder (Finder says disk is in use and cannot be ejected even when no processes are running except for Finder and Time Machine has been disabled), by dragging it to the dock (hangs computer which can only be fixed by a hard reboot), in Disk Utilities (drive cannot be unmounted) or in Terminal ("no such file or directory").
    The first backup attempt failed after 3 hours of "preparing" with the message "The backup was not performed because an error occured while creating backup directory".
    I tried repairing the disk in Disk Utilities and Disk Utilities said the drive was OK ("the volume Time Machine Backups appears to be OK"). I tried ejecting the drive (hard reboot of computer and disconnecting the drive), plugging it back in again and trying again.
    This time it started backing up, then failed after a few minutes with the message "an error occured while copying files to the backup volume". I had a look at the troubleshooting suggested on http://web.me.com/pondini/Time_Machine/C3.html and followed instructions. It failed again, so I did a full reset as per http://web.me.com/pondini/Time_Machine/A4.html.
    It failed again, so I tried reparing the drive again in Disk Utilities and again it said it was OK. I tried using different cables and ports (Firewire 400 instead of Firewire 800), and backups still fail.
    I have turned off anti-virus scanning (Sophos). I have tried excluding it from Spotlight but this causes an error message from Spotlight. I have tried trashing the com.apple.TimeMachine.plist file and rebooting. I have tried selecting deselecting the drive as the back up in Time Machine preferences, selecting "None", then "Stop Backing Up" then quitting preferences, rebooting, disconnecting the drive, reconnecting the drive and selecting the drive again as the backup disk in Time Machine preferences. I have tried erasing the drive completely, rebooting, and trying to back up again.
    None of these have worked. This is a brand new drive and I do not want to have to replace it again if I do not have to.
    Does anyone have any suggestions? Thank you.

    Hello, some possible clues...
    Should you click “Start New Backup”? Not yet! If you see the dialog above, your existing Time Machine backup is corrupt, and you might not be able to recover data from it. But you can save a copy of the corrupt bundle and, perhaps, extract some data from it if needed.
    Ask yourself if Time Machine has saved data you might need before deciding what to do next:
    If you are sure you won’t need anything backed up before today, click “Start New Backup” and let Time Machine do its thing.
    Otherwise, click “Back Up Later” and save a copy before letting Time Machine start a new backup. Just look for a file called “computername.sparsebundle” (for network backups) or “Backups.backupdb” (for local ones) and create a copy with a different name. You can open sparsebundle files with DiskImageMounter and browse them like any other disk. More information is available here.
    There you go. If you click “Start New Backup” when you see this dialog box, Time Machine will erase all of your old backup data and start a new bundle. It won’t be corrupt, but it will be empty.
    Note that you can manually initiate a Time Machine backup integrity check by option-clicking the “Time Machine” icon in the menu bar and selecting “Verify Backups.”
    http://blog.fosketts.net/2010/08/11/time-machine-completed-verification-backups- improve-reliability-time-machine-create-backup/
    According to This Time Machine resource   “This appears only on Snow Leopard, and started with the Time Capsule Backup Update 1.0 in mid-May of 2010.  It also seems to have been included in the 10.6.3 v1.1 update and 10.6.4.”
    So, what can you do about it?  Grin and bear it, it seems, until Apple fixes it.
    One thing you can do to make the backup take less time is to connect your machine to your Time Capsule or other backup drive via Ethernet for the duration of the initial backup.
    http://www.theinternetpatrol.com/the-dreaded-time-machine-has-completed-a-verifi cation-of-your-backups-to-improve-reliability-time-machine-must-create-a-new-ba c kup-for-you-message-and-why-you-are-seeing-it/
    Time Machine: About "Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."...
    http://support.apple.com/kb/HT4076
    Or a different/better solution in my experiences...
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Or the most expensive one & my favorite, Tri-Backup...
    http://www.tri-edre.com/english/products/tribackup.html

  • Active Directory: user has admin rights when logs in for the first time

    I have an Xserve server running OS X server 10.5.8 and trying to host _open and active directory_ for both Mac and PC machines. The open directory works fine but what happens on the active directory side is that, when a user logs in from a windows machine he/she can access all the other users folders. In other words, he/she almost has *admin rights*. Is this normal or there is some settings that I can look into to fix this?
    Details: The first time user logs in, his only effect on the server is the password change. What this means is that his changes dont get uploaded to the server. It is only the second time the user logs in from ANOTHER computer that the server starts saving the his profile. Also, after the second login the user doesnt have admin rights anymore.
    Thanks,
    MR

    If you've just changed your login password in Recovery mode, follow these instructions. Otherwise, see below.
    At some point, you may have reset your keychain to default in Keychain Access. That action would have caused your login keychain to be renamed.
    Back up all data before proceeding.
    In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Keychains
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
    Back in Keychain Access, select 
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

  • Download music from ipod when opening iTunes for the first time?

    I just got a new iMac at work and the first time I plugged my iPod into the comupter to charge it up it opened my iTunes and then started to download all my songs from my iPod. Being 7am I wasn't thinking properly and pressed cancle to stop the download, then I remember I have 500GB free memory and why shouldn't I have my music on the computer. The problem is I can't get it to download the music again. I know you not ment to be able to download from your ipod but that is what happened.
    I have tried completely uninstalling iTunes by removing the icon in Applications and in the User>Music folder to get the same result but it makes no difference, where I once had a couple of meg's worth of music which had started to download I have none. Can somebody please explain to me how this happened and how I can revert iTunes back to how it was before I opened it so I can quickly download all my music onto my computer??

    We'll unfortunately that's not true. I had though that was the case as well until this happened. I wasn't sure if this a new feature that iTunes had for when you first attach an ipod to a new iTunes (where you need to go through the terms and conditions, and set up your settings at the beginging).
    I have downloaded very little from the iTunes store and the things which got downloaded were some funny adds which I had converted and put on my ipod as well as some AC/DC, some Beatles and a collection of 179 other songs (I'd be lucky if I've downloaded 5 songs in my life from iTunes). Before deleting everything in the hope that I could do it again I even played a couple of them in case all it had done was take the album artwork or something. But they all play fine and none of them were ones I had downloaded.
    Does anyone know what's happened and how it can be repeated?
    As to the other ways of getting music of your ipod I'm aware of them and have used irip in the past without any problems. I know how to do it that way but now that I have been made aware of this other way I was wanting to clear up how it happened and if it can be repeated, say if I was to reinstall iTunes.

Maybe you are looking for