My G4 imac wont read a dvd burned on my new mac mini

I burned some pictures on a dvd on my mac mini and when I went to load them on my imac the disc wont show up??? The drive is working as it reads dvds burned on the imac, just not the ones burned on the new mac mini............any ideas? Thanks

You can only use the App Store version to reinstall on your new Mac if you bought Logic via the App Store in the first place.... and then it will appear under the Purchases tab in the Mac App Store App so long as you are signed in using the same Apple ID you used to purchase Logic via the App store in the first place.
If you bought the DVD edition of Logic Studio then you must initially install using those original DVDs to begin with and then update to the latest version of your version of Logic via software updates.
No DVD drive? Buy an external one.. Amazon do a very cheap basic one that works well..
or...
Use Remote Disk if you still have your older Mac which has a built in DVD drive...
http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

Similar Messages

  • DVD Burner not working in Mac Mini

    My mac mini (running OSX 10.7.5) all of a sudden stopped burning/reading DVDs, however CD burning and reading still works.
    I ran my system's disk utility and corrected some problems and tried again to no avail. I tried a previously burned DVD which did not work either. However, after trying several DVDs, I got the burner to work (or at least it appeared to as it went thru the usual messages of recording my iDVD movie, but when the recording message showed DONE, the screen appeared to freeze there (typically, at this point, I usually get a message that asks if I want to burn another) --I was able to hit cancel to exit the program. Anyways, the DVD did not burn. At this point on the plus side, I can now read my previously burned DVD... so I tried again to burn my iDVD Movie again but it just spits out after 15-30 seconds.
    I saw on some boards that I should try cleaning the burner? Do I have to take my system apart to do this? Do I use a cleaning disk? If this is the case, will my DVD acknowledge it if it isn't working? Or do I just spray compressed air into its slot?
    Any help would be greatly appreciated as this is for a job that I need to get out.
    Thanks so much!

    Yes use a CD/DVD cleaning disk
    Also see:
    How to clean a DVD Superdrive using a credit card !
    It could be that the burning laser died. Different lasers are used for CD and DVD burning

  • Can i use ANY external CD/DVD drive with the NEW mac mini?

    We just got the newest Mac Mini and want to get an external drive for importing and burning CD's and DVD's.
    Can we use ANY external CD/DVD drive or do we NEED to use the "Apple MacBook Air SuperDrive."
    Thanks
    Eliot

    Maybe.
    I've had some situations where a non-Apple DVD drive would not do a particular job.  When I tried the same project with the Apple SuperDrive everything worked perfectly.
    This is an area where I would not try to save money.
    http://store.apple.com/us/product/MC684ZM/A

  • Annoying video/DVD playback problems on new Mac mini (2010)

    I have a Mac mini at home right now, latest edition (2010).
    I am very surprised to find that DVD playback exhibits signs of stutters here and there. Not huge stutters, but I can constantly see small "skips" and what seems like frame drops here and there. Playing back the same DVD on a $120 Blu-ray-player shows no sign of this behaviour.
    I have tried this on two different TV sets (one 720p and one 1080p), and the mini is not able to play back a DVD without these stutters/skips. Two different blu-ray players play the disc just fine (I have been using Ghost Dog to test - check chapter to and the scenes containing panning, it's easier to notice that way).
    It seems ordinary video files playback (files from HD, 720p, mkv) exhibit some of the same behaviour, though this seems more dependent on which app is used for playback. Quicktime seems worse (noticeable stutters/skips), VLC 1.1 a bit better (though both DVD playback and file playback show signs of stutter), while XBMC is the best of the three, with very little frame drop (if that is in fact what it is).
    Any idea what's going on here? Why will such a expensive machine with HDMI output not play back video properly, while a cheap Blu-ray-player does it just fine?
    Are there any known issues?
    (sorry for posting this in the wrong from earlier!)

    I have not used the dvd player app in my 2010 mini, but I've certainly played every media type under the sun since receiving it.
    It plays them all without dropping frames, stuttering, pausing, etc.
    Are you using dvd player with dvd disc images, video ts folders, or actual DVD discs in the drive?
    If you're playing a disc image or video ts folder, are you accessing them over wireless networking? If so, try them on the internal drive, or over a wired network connection.
    Try turning off the option is in energy saver that allows drive sleep (system sleep can stay where it is, just turn off *hard drive* sleep).
    For best performance, make sure you aren't running other apps besides the media player app that you're using at the time.
    Make sure you don't have software or utilities running background tasks (such as disk warrior, drive genius or tech tool pro).
    If you have external devices connected (including printer and/or scanner), try the system without them connected. Does the video playback improve without them connected? If it does, then try reconnecting them one by one to figure out which one of them is related to the problem.

  • Annoying video/DVD playback problems on new Mac mini

    I have a Mac mini at home right now, latest edition (2010).
    I am very surprised to find that DVD playback exhibits signs of stutters here and there. Not huge stutters, but I can constantly see small "skips" and what seems like frame drops here and there. Playing back the same DVD on a $120 Blu-ray-player shows no sign of this behaviour.
    I have tried this on two different TV sets (one 720p and one 1080p), and the mini is not able to play back a DVD without these stutters/skips. Two different blu-ray players play the disc just fine (I have been using Ghost Dog to test - check chapter to and the scenes containing panning, it's easier to notice that way).
    It seems ordinary video files playback (files from HD, 720p, mkv) exhibit some of the same behaviour, though this seems more dependent on which app is used for playback. Quicktime seems worse (noticeable stutters/skips), VLC 1.1 a bit better (though both DVD playback and file playback show signs of stutter), while XBMC is the best of the three, with very little frame drop (if that is in fact what it is).
    Any idea what's going on here? Why will such a expensive machine with HDMI output not play back video properly, while a cheap Blu-ray-player does it just fine?
    Are there any known issues?

    Any other processes running on the mini at the same time?

  • Iomega SuperSlim drive won't burn on my new Mac Mini.

    It recognizes and starts the burn the just sits there with the "State: Writing Track 1".  Is it not compatiable or is there something different I have to do to make it work?

    This
    http://s.nsit.com/uk01/en-gb/content/media/pdf/iomega-portable-writer.pdf
    says:
    Microsoft Windows® XP/Vista, Mac 10.4 or 10.5* or Linux**:
    Does it burn when connected to a PC?
    Are the disks good?

  • New mac mini and noisy dvd drive

    Any time I have a DVD in my brand new mac mini, from commercial DVDs to trying to author a blank DVD, I get the dreaded chainsaw sound that plagues anyone who has owned an xbox 360. Has anyone else suffered with this with their new mac mini or should I send it back to apple

    I should have been a little more specific. This happens usually when I try and do slightly disc intensive tasks, such as burn a disc, import a disc to itunes, and I can even get it to sound when I leave a disc in the drive, turn the computer off, and as it's booting it will make the grinding noise. I first thought that the computer couldn't lay on it's side as that's when I first noticed it (sort of like the wii on it's side because this fits my setup), but it makes the same noise whether I have it on it's side or not. This is also not disc specific, I can re-create the noise with different discs, DVDs, CDs when importing to itunes. Guess I'll be taking it to an iTunes store to get it checked out.

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • I bough a new imac, this haven't dvd burner, i bought a external dvd burner but the imac havent a idvd and i need this program, no other one, how to download this and install?

    i bough a new imac, this haven't dvd burner, i bought a external dvd burner but the imac havent a idvd and i need this program, no other one, how to download this and install?

    Hi
    how to download this and install?
    There are no free DownLoads !
    There are no legal DownLoads at all !
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • Is there any hope of using iDVD 7 to burn DVDs (Leopard 10.6.6, Mac Mini)?

    I've tried many of the suggestions in these discussions, short of reinstalling iDVD or wiping the hard drive and reinstalling OSX 10.6.6, and doing that seems excessive simply to use included Apple software. I have more than 260GB available on my hard drive, no external drives open (there are some connected both by FW and USB, but they are not even turned on, just connected to ports).
    iDVD 7.1.1 won't even get past the menu before it fails and gives an error that the 'burn cannot be completed'. There are no 'extras' in the menu, simply ONE QT/iMovie/iDVD compliant 15-second video; no drop zones, no fancy anything, default text for the video 'button', no hyphens or special characters, simply one video from my camera and the application can't get past the menu.
    Should I just go back to burning dvds from my powerbook G4 (tibook) through s-video to a dvd/vhs recorder?

    Hi, and thanks for the quick response. Yes, I have deleted the iDVD preferences about a dozen times. I started out my first project with a positive attitude and set up to burn 4 videos (all non-copyrighted, from my own cameras and library), and decided to fill in some time with slide shows from pictures on the hard drive (not in iPhoto, but they showed up in the iDVD media area and tested fine following the iDVD 'how to' pdf.)
    I had added audio (to the slides), but it was from an external 40-gb firewire drive, and one of the slide shows was from pics stored there.
    I removed those externally-hosted files first, after trying several times to delete the plist file with no better results. Then I removed that hard drive from the picture and turned it off, so no external source files are in play.
    I removed slide shows entirely from the media list after just removing them from the project and menu seemed to have no affect, partly since the error message mentions the 'menu/slideshows' in it's (boilerplate?) dialog box.
    Tried 'burning a disc image' after each modification (reduction of number and length of files) to the project, based on recommendations here.
    With each successive error (none of which got past the menu building phase) I removed another video file; deleted the menus entirely and tried 'new' menus, until I decided to remove all videos from the project and try just that one short 15-second video shot last week for posting on a web forum (it was not one of the original videos I hoped to use).
    I shut off all 'drop zones' from the menus. I used the default fonts and text buttons that appear when you drag a file from the media list into the menu window.
    I even tried rebooting the computer to clear any latent memory that might be causing a problem (as a 'shot in the dark'). After every change, I quit the project and iDVD and deleted the plist, then restarted iDVD and tried again. All to no avail.
    I'm on a budget, that's why I downgraded from my old iMac G5 when it died and switched to the Mac Mini aluminum 4,1, and I'm not looking to upgrade my now useless Toast 5xx to a compatible Toast 10 (even if that might work).
    To recap:
    I started out full-bore with video and photos and music (latter two for slide shows);
    After confirming everything worked together and there were no errors showing in the map view, and running through the slides and video files several times to make sure they 'worked', I tried to burn the disc (no disc image at this point, just a confident full-blown burn). Got the error in the menu phase.
    Started reading the discussions forum (this place) for a couple hours looking at what problems others were having, and trying the suggestions posed therein. No luck.
    Then decided to try deleting preference plist and creating a 'disc image' on the desktop of the entire original project. No luck.
    Then multiple incremental changes to the original project until I was left with the single movie file to see if any of my original media files might be the problem. (I even made sure there were no special characters in the titles, menu buttons, etc of any of those files, as someone mentioned the menus don't like any 'special characters'.)
    So, here we are. I am wondering if maybe the Mini is just not powerful enough to handle burning dvds? (It seems like it isn't platform based, since iDVD doesn't even get through the menu phase). This Mac Mini is about 1 month old.

  • I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

    I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

    Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
    OS X Mountain Lion: Burn a CD or DVD may help.

  • Is there a dvd burner that comes with macs? if not whats a good dvd burner for mac os x?

    is there a dvd burner that comes with macs? if not whats a good dvd burner for mac os x?

    This may help, but it's an accessory with an extra cost:
    http://store.apple.com/us/product/MD564ZM/A
    This new Superdrive also supports DVD-Audio so you can load more music into it than a CD.

  • I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    Hi Joe,
    Thanks for your quick response.  I should add....it worked before.  When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac.  Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed.  I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD.  SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously.  I do not remember changing any settings since then. 
    When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc.  The problem is my DVD is all miscellaneious files/documents.  I just want to be able to see them in the finder.  I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents.  Again, I was able to open them previously and the DVD is not corrupted in any way.  
    Any additional advice? 
    Thank you!

  • Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

    Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

    Hi Claire, sounds dire, but some things to try...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Please recommend me an external CD/DVD writer to go with new Mac Mini

    I'm thinking of buying a new Mac Mini, and I would like an external CD/DVD drive for it. It needs to be able to read and write to both CDs and DVDs, and I'm generally looking for something as cheap as possible. Obviously I don't want something that's going to break within a year though!
    I plan on using it to watch DVDs, so something fairly quiet would be ideal. Speed isn't really a big issue for me.
    If anyone can recommend something suitable and reliable (or, alternatively tell me what to avoid), I would be very grateful.

    What is too expensive? The Apple Superdrive is $79.
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
    I personally use a Samsung Blu-ray drive that burns and reads all.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827151253
    One caveat, there is no Blu-ray player on the Mac that is free.
    http://www.macupdate.com/app/mac/47163/aurora-blu-ray-player
    http://www.macupdate.com/app/mac/40390/macgo-blu-ray-player

Maybe you are looking for