My HD on my pc just recently went down. I had to buy a new HD and reinstall windows on the new HD. I am running a 64 bit system, and have installed itunes (x64). itunes wont recognize my phone. I have done all troubleshooting tutorials. HELP!
I just had to replace the HD on my system. I am running a x64 system and have installed the correct version of iTunes. ITunes will not recognize my phone since the new install. I have went online and followed all of the troubleshooting guides on Apple support. No good. I have uninstalled and installed iTunes several times. I have even tried reinstalling windows. I also get an error message when I start up Itunes that reads " The registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing. This can happen as a result of installing other cd burring software. Please reinstall ITunes. I am so frustrated, I know there has to be a solution. I tunes works in all other senses, just not recognizing my Phone. I need help, my wife and I both have iPhones and need to sync..........
Please Help
You should be able to:
Backup the device to the new installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2
Similar Messages
-
My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks
If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
We have CS5 installed on a workstation, we have the products registered with Adobe. We are going to be replacing this workstation and reinstalling CS5 on a new workstation. Do I need to unregister the product to be able to install it on the new workstation. If so, how do I do this?
Thanksyou should deactivate (help>deactivate) that installation on the old workstation. then download and install on your new work station using your serial number. (ie, make sure you can find your serial number - if you need help with this, let us know.)
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?
While you're in itunes, with the leftside window open, click on Apps. Then, look across the top middle of your itunes screen. You will see several choices: All, Iphone/iPad Touch, Ipad, Ipod Games, List, and Updates.
Clicking on each of these gives you a different view.
When you select ALL you will see all of your apps. When you select Updates you sill see only the apps that need to be updated. When you are in Updates you will see the Update button in the lower right corner.
Hope this helps. -
My mac is a version 10.5.8. I just downloaded ios7, and it is telling me I need to download iTunes 11 to connect to my phone, but I don't have a new enough version. What do I do?! I think snow leopard was the last update I purchased. Is there a way to convert my phone back? I need to be able to update it, but don't have the money for a new computer.. Help!
10.5.8 is Leopard, not Snow Leopard. Leopard ran on both PPC and Intel Macs, but Snow Leopard runs only on Intel Macs. iTunes 11 will run on Snow Leopard, though I'm not sure whether iOS7 requires a higher system (Apple seem to specify only itunes 11 and not an OSX system so you may be OK). However if your Mac is a PPC you cannot proceed; if it's an Intel one you can purchase Snow Leopard in the Online Store (search for Snow Leopard to find it quickly) - it's not expensive. It's not possible to roll your phone back to iOS6.
-
My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.
Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
Try Recovery Mode... http://support.apple.com/kb/HT1808 -
So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help
Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
Come on Apple get your finger out and help us here please ? -
Please Help!!! My itunes or computer wont recognize my first gen ipod touch
A couple of months ago my iPod touch kept turning off on me even though my battery level read half. When the ipod turned off on me the first time I tried turning it back on, but the apple logo would only stay on for a couple of seconds then turn off. I tried turning it back on about three times, when I finally decided to stop trying for a couple of minutes. About ten minutes passed and I tried turning it back on, but this time it actually did turn on. The thing is though that when it turned on it had the usb and apple logo on the screen. I tried connecting it to my computer and it didn't pick it up. I plugged it to my friends computer and it still didn't pick it up. I tried reinstalling i tunes, I tried putting it in recovery mode and again nothing. Can some one please help me. I really do not want to spend thirty bucks on apple phone service.
Have you tried placing it in DFU mode and restoring it.?
http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/
Next I would try this program to try to place it in recovery mode:
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/ -
Itunes 11.1.5
Mac OS X 10.7.5
IPhone 4 7.0.6
IPhone 5 7.0.6
Ikeep getting this error when I attach the new phone. After it would not work I did a Icloud back up of my old phone and restored it on the new phone, but I have other music and apps on my Itunes that I would like the option to sync and I like to be able to backup my phone on my Mac. What do I need to do to get the new phone attached back to this itunes?
iTunes could not connect to this iPhone. You do not have permission.Im having the same problem after installing ios7.1
Checked the usb status and it sees an iphone ( 4s ) attached,
Repaired disc permissions
updated and reset iphone
and itunes
reinstalled mavericks from scratch
phone alert saying " TRUST THIS COMPUTER?"
hit trust
same alert keeps appearing
again and again
itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
what the actual F*** is going on and can anybody help ?????? -
Had my computer serviced recently and had to reinstall itunes. Now its saying I have two accounts. How can I switch to my original account where all my music that I imported is and get rid of the new one that only shows my purchased music?
Had my computer serviced recently and had to reinstall itunes. Now its saying I have two accounts. How can I switch to my original account where all my music that I imported is and get rid of the new one that only shows my purchased music?
-
My iTunes keeps crashing. I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it. I recently upgraded to 10.5. Any ideas? I am running Windows 7 on a new, decent, laptop. The music is on the laptop's hard drive. There is plenty of hard drive space left.
iTunes starts fine, and I can do stuff, then within a minute or two or three it gives me an error message pop-up.The error message says:
iTunes has stopped working.
Windows can check nline for a solution to the problem.
-> Check online for a solution and close the program
-> Close the program
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.0.142
Application Timestamp: 4e9243f2
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
Exception Code: c0000005
Exception Offset: 0001500a
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I've chosen both items, neither does anything but close the program. This problem is new with iTunes 10.5; I did not have it before. -
I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported, Isk this of both 02 and apple, who's phone is this and what right do you have to lock a previously unlocked phone? very angry
Where did you get these phones?
These and other forums are full of people with iPhone unlocking problems - the net result is that, as others have said, is:
If you bought them from Apple they will be (and stay) unlocked.
If you bought them PAYG from CPW then they will lock to the first SIM activated.
Any other contract or PAYG phone iPhone bought from the networks WILL be locked by them too.
However, all is not lost. The original purchaser can request for the phones to be unlocked by Apple, via the carrier. The carriers usually charge around £20 to do this, or gratis if you're out of contract.
You are the original purchaser, right? If not, you need to get in touch with that person and pray they'll help you out. -
I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?
Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
NSU 1.4 wont recognize my phone
Obviously i had to update to the newest version as there is NO OPTION to not to do it :/:/:/ and now NSU wont recognize my phone. Thanks nokia!!!
Any ideas to fix it for god's sake??
ex N97 20.0.019 owner
Happy iPhone owner with ALL features actually working :]If you give an advise where to find these registry entries it would be much apriecieted
ex N97 20.0.019 owner
Happy iPhone owner with ALL features actually working :] -
My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?
1st... make sure nothing's covering/smudging the camera lens. then...
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove the Camera app from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Camera app from this list.
- Press the home button twice when done.
- Restart the Camera app
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.
Maybe you are looking for
-
Why are my smart playlists not updating?
I tried to create a new smart playlist, and could not get even the simplest one to populate with any music. I then noticed that my current smart playlists are not updating. For example, I have an UNRATED smart playlist (Rating is less than *), and
-
Garageband file glitched, how can I get it back?
So, I have been working on my demo for quite some time, and a few days ago, one of my songs glitched out. Not sure what hapened though. I saved it and exported it to itunes as a m4a file, closed it and saved a preview (thank goodness), but the .band
-
Obyc for country chart of account
Hi, what is setting required for obyc for country chart of account. I have already assigned country chart of account number in operative chart of account- Comapny code section. CHEERS
-
Does XSAN work with other HW SAN products
Will XSAN work with SANs other than XRAID? I am investigating building an XSAN environment with a Xiotech SAN, a Cisco fabric and XSAN. James Xserve Mac OS X (10.3.9) two Fibre Channel Cards
-
hola, no se escucha el tono de llmada entrante en mi equipo y no aparece la camapana cuando lo pingo en vibrados, tampoco el volumen de los botones de lado izquierdo, que pued0o hacer?