My iMac is dying and I need some advice on what is wrong with it

Since about October my imac has decided to restart itself and sometimes just glitch. This started just before I bought starcraft 2. It ran fine for a good few monthes, however it began to start glitching or restarting itself. It has got to the point where I cannot load any games without it glitching or restarting.  I now have to use my windows laptop which is prone to overheating so I can't win either way...
I have also begun finding multi coloured strikes running through my safari browser. I took a screen shot so I could show you, below is a link to the picture.
http://i1091.photobucket.com/albums/i390/mmloraculum/Picture3.png
My computer setup is as follows:
OS X 10.5.8
Processor: 2 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
My graphics is:
Chipset Model:          ATY,RadeonX1600
Thanks for reading this.

Try reinstalling Leopard:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Similar Messages

  • My 24" iMac just died and will not power-up.  What can I do?

    My 24" iMac just died and will not power-up.  What can I do?

    Bring it into an Apple Store for a free diagnosis and quote for cost of repair/replacement of parts.
    If the costs are $500 or over, consider using the money toward a new or "newer" (used) Mac.

  • My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

    My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

    The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
    If not, it will have to be replace.
    Allan

  • I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. What is wrong with iTunes? Is the server down???

    I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. What is wrong with iTunes? Is the server down or what? I need to download some things and update some apps...

    I've been getting the same message for like an hour now.  Since everything was working fine a few hours ago, and nothing changed on my end before it stopped working, I'm guessing it's something on Apple's end.  They probably already know about it by now, and are hopefully working on fixing it, so there's probably not much we can do but wait for them to fix it.

  • My iPod will not charge at all it will when it's off it will power on and charge to a certain pint then will stop and no longer charge what is its problem I've tried 3 cords and three different outlets and also in my computer! What is wrong with it?

    My iPod will not charge at all it will when it's off it will power on and charge to a certain pint then will stop and no longer charge what is its problem I've tried 3 cords and three different outlets and also in my computer! What is wrong with it?it won't charge when it's powered on only when it s off then it turns on and stops charging?? What's wrong with it ad how much is a Genius Bar appt at apple stores??

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • I need help figuring out what is wrong with my Macbook Pro

    I have a mid 2012 Macbook Pro with OS X Mavericks on it and for the past few weeks it has running VERY SLOW! I have no idea what is wrong with it, i have read other discussion forums trying to figure it out on my own. So far i have had no luck in fixing the slowness. When i open applications the icon will bounce in dock forever before opening and then my computer will freeze with the little rainbow wheel circling and circling for a few minutes... and if i try to browse websites it take forever for them to load or youtube will just stop working for me. Everything i do, no matter what i click, the rainbow wheel will pop up! The only thing i can think of messing it up was a friend of mine plugging in a flash drive a few weeks ago to take some videos and imovie to put on his Macbook Pro, he has said his laptop has been running fine though... so idk if that was the problem. Anyways, could someone please help me try something? Thank you!!

    OS X Mavericks: If your Mac runs slowly?
    http://support.apple.com/kb/PH13895
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Increase disk space.
    http://support.apple.com/kb/PH13806

  • My iPod 5 turn off when I was listening to music this morning and it was full charge idk what's wrong with it because it won't turn on plus it is a new iPod. I bought the iPod 35 days ago I even have the recieve..

    I Need to know what's wrong  with my iPod 5. it turn itself off this morning when I was listening to music. The iPod is new I bought it 35 days I even have the receive to prove that is 100% mine and not stolen.. Please help me I work really hard to save the money for it and now I can use it is not fair.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Still Have v. 10.4.11 but am configuring a new MBP and I need some advice..

    hey-
    I am replacing my 3 year-old MBP which never made it to the Leopard stage, because I was chicken. This one is going to be cleaned up and given to a family next door from a real poor area of Mexico and until they saw this had never seen a notebook. So I am excited about this.
    anyway, I am configuring a new MBP together and I have a few questions that are probably pretty basic, but still questions. I should have thought of this before, but is getting a new MBP with Snow Leopard installed on the machine (and I was old by the support guy who helped me with the configuration since it will be used for a graduate school of architecture, planing, and preservation program too.
    any feeling on jumping from 10.4.11 (which I guess is Tiger OS X) to Snow Leopard and totally bypassing Leopard? It sounds like Snow Leopard is pretty much a major "update" to Leopard, but that is probably wrong. (Just a side questions, what does the Operating System OS X mean and do all of the operating system have OS X or did it start at OS 1 and will keep going up?)
    Is there a time when a person who wants to try and focus on school or other important things can pretty much be sure that a new OS has had sufficient time for the major bugs to be worked out and most likely can feel safer about making the purchase than if they had not waited and did not really care-thinking that Apple would get them fixed and the updates would fix the problems? I do not tend to think this way, but in this situation I am going out a bit from my usual "way" and living or should I saying hoping that this has happened and is true? Does that make sense? So, any feeling if SL has been out long enough now that Apple has had a chance to make sure it is doing well and has pretty much been integrated into the hardware and properly functioning of the notebook as a "single unit?"
    thanks in advance for any feedback and I apologize if the wording was incorrect or I did not explain myself clear enough.

    You should not find it hard to jump from using Tiger (Mac OS 10.4) directly to using Snow Leopard (Mac OS 10.6). Some things are a little different, including a few changes to system preferences & how the Finder handles changing views from one folder to the next, but it is fundamentally the same from a user interface standpoint. In fact, there are very few interface differences you would notice between using Leopard (Mac OS 10.5) & Snow Leopard.
    What you will most likely notice the most when going from a 3 year old MBP to a new one is that its response is substantially quicker: startup is quicker, apps open faster, Finder tasks complete in less time, etc. This is due both to the more powerful CPU & other components in the new machine & to the new OS, which is more efficient than previous ones.
    "Mac OS" is the generic name for Apple's proprietary operating system that runs Macintosh computers. There were versions 1 through 9 of this operating system, starting with the one developed by Apple for the first Mac that appeared in 1984, but the first version to get the "Mac OS" designator was Mac OS 8, released in 1997. It was followed by Mac OS 9, released in 1999. All of these versions can be considered decedents of the first one, with strong family resemblances both in their internal structures & graphic user interfaces. Mac OS X is much different internally, incorporating many components of the venerable UNIX operating system first developed in 1969 at AT&T's Bell lab, plus a graphic user interface update (named "Aqua") more suited to its greatly improved capabilities. It is not a "pure" UNIX variant but instead a synthesis of UNIX & Apple's old & current technologies.
    Each major revision of Mac OS X has had a cat name & a "point number" like Cheetah for 10.0 or Tiger for 10.4. Each revision has brought new features to the OS as well as under-the-hood improvements. Unfortunately, these improvements come at a cost in terms of legacy support. Some applications require revisions to work with each new major version, as do some of the drivers for external hardware. Generally speaking, fairly current apps & hardware drivers have gotten or will get revised for Snow Leopard if needed, but there are no guarantees that all ever will.
    There are also bugs in every major OS release from every OS maker. Generally, these are obscure, affect few users significantly, & are eliminated in updates released after the first major version, but even the updates can introduce new bugs. Snow Leopard appears to be more bug free than any prior Mac OS major release, but the possibility exists that some bug will affect you in some critical way.
    That said, the chances of this are low, & you should not read too much into reports here of problems unless they are widespread & describe very closely the same problem. Keep in mind that there are already several million copies of Snow Leopard in use; any really widespread problems would result in tens of thousands of complaints & probably make the evening news as well.

  • I need some advice on what kind of virus protection program to buy.I am new to using a Mac,the promotional one is expired .I need to decide soon

    I need advice about what security program to buy the promotional one is expired. To keep the Webfoot program is expensive.Is there another less costly one recommended ?

    Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
    1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
    It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
    The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
    The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    ☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    ☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    ☞ It can easily be disabled or overridden by the user.
    ☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    ☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
    For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
    The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
    Software from an untrustworthy source
    ☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
    ☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
    ☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
    ☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
    Software that is plainly illegal or does something illegal
    ☞ High-priced commercial software such as Photoshop is "cracked" or "free."
    ☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
    Conditional or unsolicited offers from strangers
    ☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    ☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
    ☞ You win a prize in a contest you never entered.
    ☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
    ☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
    ☞ Anything online that you would expect to pay for is "free."
    Unexpected events
    ☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
    ☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
    ☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    ☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
    I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
    Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
    7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
    Why shouldn't you use commercial AV products?
    ☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
    ☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    ☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
    ☞ Most importantly, a false sense of security is dangerous.
    8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
    Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
    London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
    You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • Need some advice on what kind of printer to purchase???

    Hello!
    I'm a graphic designer in a small town and I'm wanted to break away from working under someone and start my own small business. I want to be able to print my own work and I'm looking for some suggestions on what kind of printer to purchase (something comparable to the xerox 7750?? or if there is something better???) I was looking at Xerox and not sure if that is the way to go. Most of my work will be small: business cards, wedding invites, graduation announcements, etc. I work at a print shop now and we do a TON of that type of work off our Xerox 7750.
    I'd appreciate any advice you have on purchasing the right printer and getting my small business started!
    Thanks

    I also have a Oki C9800hdn postscript and am a solo operator. The Oki also does banners 325x900mm (up to 1200mm long too)on paper and a special weatherproof paper. Standard sizes are up to oversize A3. Remember to order the POSTSCRIPT version of whatever printer you get.
    Consumables are the thing to look at which makes it hard to price cost of prints.
    I used to have a FujiXerox where I paid monthly on a rental agreement - but it was over 5 years which was too long for me. In real terms it worked out about $850 per month including the cost per 'clicks' which I didn't like either. The black toner and maintenance was included for the Xerox, but I still had to pay for the colour toners which were the same price as the Oki colour toners. (Colour approx AUD$480 each and mono approx $170AUD each). Plus the drums for each colour have to be replaced at 30,000 prints. However the Oki colour toners last longer and do more prints. Don't believe the 'number of prints with 5% coverage'. My average coverage is 80% with full colour or mono. Weight of card is up to 250gsm (more than the Xerox did). You can set up profiles so that what you print is very close to any commercial prints you get done for larger runs.

  • When accessing Sams Club web site using Firefox and go to Photos, then Pricing, it brings up Digital Photo Center, but when I click items nothing comes up. I turned on my IE and the information was there. What's wrong with Firefox.

    When you go to the link above go to Pricing Under Information - last item). That takes you to Sam's Digital Photo Center page. On the left side click on any of the items listed and I get nothing. This information shows on IE

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • My macbook is extremely hot and the fan is worryingly loud, what is wrong with it and how do i stop this from happening?

    For soem reason if I actually dare to use my macbook the fan kicks in and is so loud that I am unable to use skype or other voice programs without a headset because of its volume, also it gets very hot very fast, so hot that if I rest it on my knees it burns.  I normally have it on a desk and the area is well ventialted.  I have no print queues and rarely have more than two programs running at a time.  Can anyone offer a suggestion of what is wrong and how I can fix this please?  One of the main reasons I bought one in the first place was that they are so quiet when shown them in the apple store, but this is worryingly loud... 

    Thanks, it seems that it doesn't like to play games, which is a bit of a bummer as i bought this specifically because it was capable of doing that.  To be fair, it is capable... I just need to get used to a sound like sitting by a washing machine on spin cycle...  Wish they would make people aware of this in the Apple Store, its very misleading and not at all desireable.

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • MacBook Died...need some advice

    My 13" white macbook harddrive appears to be dead and now I am off to buy a new HD for the machine. I have several iPods and an Apple TV. How do I get my iTunes library from the Apple TV or iPod back into my iTunes Library before the new iTunes (on the new harddrive) overwrites those two devices with an empty library? Same with my photos on the Apple TV? Thanks...Rob

    There are supposedly workaround tools that do this, but many become unusuable with each iTunes revision. For better or worse it's a protected system. I won't go over the specifics because discussion workarounds for the DRM (essentially what it the scheme is) would violate the terms of service for using this forum.

  • I am getting Apple TV and i need some advice...

    Let me tell you guys what i have first and then any suggestions or advice would be appreciated.
    I have a Mac with OS 10.3.9, i have the latest iTunes version and a Linksys WRT54G wireless router with the high gain antenna. (I'll be getting a N router soon)
    The Apple TV will be hooked up using component cables to a 23" Dell W2306 LCD monitor.
    I also have a few questions;
    How simple is it to set up Apple TV with iTunes?
    Do i have to be logged in on my Mac when using Apple TV, if yes then can i set up the Mac so that it can log off once i am done with the Apple TV?
    Does Apple TV has it's own unique IP address or something of that sort, this is so that i can put in that unique number in my router for extra security, that way only Apple TV and Mac can access my router.
    That's all i can think of for now, thanks.

    How simple is it to set up Apple TV with iTunes?
    Very simple. You set up your ATV and then pair it with the syncing computer by entering a code into iTunes.
    Do i have to be logged in on my Mac when using Apple TV, if yes then can i set up the Mac so that it can log off once i am done with the Apple TV?
    There's two modes for using ATV: "Synced" mode - you view the content that you have synced from your computer to ATV's hard disk. In that mode, ATV is self-sufficient, and your computer doesn't have to be running. Second, "streaming" mode - your computer serves the files on the fly to ATV. For this, it has to be running and iTunes has to be open. I don't know of any way to auto-log off the Mac. Maybe an experienced person can program something like that using Automator.
    Does Apple TV has it's own unique IP address or something of that sort, this is so that i can put in that unique number in my router for extra security, that way only Apple TV and Mac can access my router.
    I'm not a network expert, but ATV has an IP tab in the network setup, so I believe that is possible. Others may jump in.

Maybe you are looking for

  • Some music on iTunes (and on iPod) no longer plays

    Hello All, I recently restored my entire music library from my iPod to my freshly formatted computer. I used CopyTran to perform the operation (http://www.copytrans.net ) - it seemed to work well. I then noticed some tracks on my computer do not play

  • Files will not open in photoshop

    Photshop Elements 8 ... opens fine... but when i go to open a file in it will go to the photoshop screen but file will not come up ... no errors etc it just wont open .. Help please

  • How do I create this range report?

    Greetings, I have a report requirement which is like this - I have three columns Start Date, End Date, Amount. An example of data set can be: Start Date              End Date              Amount 07/18/2008             07/21/2008           $100.00 07/

  • Transfer Function Block Component not working properly

    When using a Transfer Function Block, and you enter in the polynomial coefficients for a simple RC Passive Low-Pass Circuit, and perform an AC analysis side-by-side to its circuit equivalent, it works great.  The 2 frequency response waveforms are id

  • Networking PC's and Servers with a iMac

    Just got my first Mac a few days ago plugged it in saw all devices: 1 PC XP SP 2 1 HP MediaServer 1 HP Laptop Vista Now the Mac cannot see any devices through the LAN : Tried enabling NetBios - still no luck Any suggestions to get my Mac to see ll th