My imac won't boot up. Tried recovery and nothing. Tried to hold shift and nothing. Tried safe mode and it has stopped at :/root

I have tried to start up in safe mode but it has stalled at :/root#       I don't know what to do next. Worried about forcing a shutdown at this point.
Any suggestions? Thanks

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

  • Intel iMac won't boot from disc or in safe mode - cannot repair disk

    I have an early Intel iMac 20" (2GHz core duo) that generally works fine. I recently ran Onyx and it reported a startup disk error, suggesting I insert the install disk, hold 'c', and use disk utility to repair the disk.
    NOTE: I have performed this operation successfully in the past and know how to do it.
    On this occasion, the iMac simply booted up to the normal desktop each time after multiple attempts at booting from both the original OSX 10.4.4 install disc and the OSX 10.5.1 install disc (current os is 10.5.8).
    I then attempted to start holding 'shift' to start in safe mode but again, repeated attempts all landed me on my normal desktop.
    I then attempted to hold 'option' to be given the choice of startup disc but again was ignored and went straight to my normal desktop after multiple attempts.
    Note that my iMac appears to be running fine otherwise. I was just trying to perform some routine maintenance and have run across this problem.
    Any ideas? This mac will be 5 years old soon and I would like to keep it running for a while longer.

    Hello Devoidarex
    You'll want to use the Leopard Install DVD to Repair your Startup Volume and may want to try a USB keyboard if your using a wireless.
    Another option is to insert the DVD and go to: System Preferences > Startup Disk > select the Install DVD > then Restart.
    Dennis

  • My iMac won't boot. I only get a white screen.  Won't open in safe mode or recovery mode.  Any suggestions?

    Hey, any help?  My 24" iMac won't boot.  I only get a white screen when turning on.  It won't open in safe or recovery mode.  Any suggestions?

    If you can't boot from your installer DVD, then take it in for service.

  • IMac won't boot after trying to migrate files to macbook?

    While trying to migrate info from my IMAC to my Macbookpro all work froze on both puters. Macbook starts and runs alright. But my IMAC won't boot at all. Tried startup disc and it won't get past picking a destination because it doesn't list one.  I made a boo boo hear and need help fixing this.

    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install OS X.

  • My iMac won't boot past grey screen and it didn't come with a os x disk

    My iMac won't boot past grey screen with apple. I've tried booting in safemode but that didn't help and my iMac didn't come with a os x disk.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    Try SMC Reset (unplug it from the back of the computer for 10 seconds then plug it back. in)
    Try PRAM Reset Cmd + OPtion + P + R on start up.
    Try safe boot - hold down shift on start up.
    Try booting to install dvd (C on start up) or recovery hd (CMD + R) and using disk utility to run a verify and repair. If you still can't boot after that reinstall the operating system. If you can't find the disc or it wont boot to the disc.
    Try single mode which is cmd+S on start up. It will open with a terminal looking window in the terminal. type in /sbin/fsck -TL. If it returns *system has been modified* continue to type that command in until it comes back with macintosh hd seems to be ok. If after 5 tries it still gives you system has been modified. You may have to replace the hard drive.

  • IMac won't boot after power outage

    I got a power outage a couple of hours ago. And now my iMac won't boot. When I power it up, it gets pass the white screen with the apple logo. The screen than turns blue with a spinning cursor. The cursor spins for about 10-15 minutes and stops but the normal login screen never appear and it won't boot into the desktop either. I just got a blue screen.
    I have boot into the install Disc1 and did the disk repair and premission repair but it didn't help.
    Any idea?
    Sidney

    Oh man, what a disaster!
    I tried to do an Archive and Install but the installation hanged at the end of disc 2 after running an iWeb script (according to the install log) with about one minute left. I have waited for two hours but it just hanged there with all the drives spin down.
    To make the problem worse. There was no way to quit the install at that point because all the menu items were disabled. The only way out was to power off. But when I powered it back on, it booted right into install directly asking for the disc 2. If I put the disc in it will install again and hang at the same spot.
    Disc 2 contains iLife. I know Apple wanted to make things simple but why can't they give me an option to skip it? After all, iLife was already installed.
    I finally got it working by booting from disc 1 and did a clean install. It took me all night to re-download all the updates and reinstall many applications. Fortunately, I have my address book, calendar, and most of my works backed up to .Mac so it wasn't a total lost.
    On the bright side. Now my iMac is working better than before. I used to have problem getting auto sleep to work but now it works perfectly. Safari also had problem accessing charts (but Camino was fine) in a few web sites like schwab.com. Now everything works.
    Lenn and David. Thanks for all your helps.
    Now I am looking for a better backup solution so that the recovery won't be this painful if disaster strikes again. Any suggestions?
    Sidney

  • How can I retrieve my files when my iMac won't boot?

    My iMac won't boot up, which may be related to a recent update to Mavericks. I've tried repairing the disk from the DVD startup - it finds invalid volume file counts and says it's repaired them, but the same thing happens when I try to boot, the screen goes dark, the cursor is still visible and movable, but that's it. Foolishly, I didn't make a back-up so I'm now trying to retrieve some files at least. Using disk utility I've been able to copy everything to an external drive but I still can't get access to the files because it won't boot from there either, same old volume errors turn up when I try to repair it. Will I have to buy another mac just to access the files?

    Assuming you are running OS X Mavericks (10.9.4), try booting into your Recovery HD by pressing/holding Command+R at startup. When you see the OS X Utilities Menu, plug in a USB external drive with an empty partition. Select Reinstall OS X from the menu and install Mavericks to you external drive. After the install is completed, your system should boot to your external drive to completed Setup. You might be able to use your internal iMac drive and Setup Assistant to bring over you User accounts and Apps to the external.

  • IMac won't boot to OS 9, boots Panther fine

    Bought an iMac G3/500/128MB/CD-RW off Ebay for super cheap (this is the Indigo 500 with 64MB base RAM). Loaded OS 10.3.3 with no probs, tested it out with no probs. (I know the 128MB RAM is less than recommended/required for Panther, the machine was supposed to have 256MB and the seller is sending that to me). Next step was to load OS 9.1 from the CD. The iMac won't boot from the OS 9.1 CD (It boots fine from the Panther CD). Also tried booting from a firewire CD drive, same result. The result is a folder with a question mark, then a folder with a smily face, repeated twice before it aborts the OS 9 boot and goes into Panther.
    Repaired permissions, no luck, wiped Panther off the drive and tried booting to OS 9 with blank drive, and still no luck.
    As stated above, the machine was supposed to have 256MB RAM, and it also has a 20GB HD when it was supposed to have a 30GB HD. I declined a new HD as the seller offered me $20 as an option (bringing the total shipped down to $69.00), but now I'm wondering if I should replace the HD with the 30GB he offered? I don't think it's an HD issue though and replacing it looks like more trouble than it's worth.
    I'm not too bummed if I have to stick to Panther, I just have a few OS 9 apps that I'd like to have access to.
    iMac G3/500/128/CD-RW   Mac OS X (10.3.3)  

    Does the CD drive boot from the Panther installation disk? I'm wondering if the CD drive is faulty, and it's not a Mac OS 9 specific issue.
    Also, in combination with that problem, the hard drive may have been partitioned without the Mac OS 9 drivers. If you haven't tried already, use Disk Utility to partition the drive. You can keep it at one partition, but be sure that the "Mac OS 9 Drivers Installed" check box is installed. [NOTE: partitioning will wipe the drive clean.]
    Other than that, I don't have a clue...
    If you can't boot directly from Mac OS 9, most "classic" apps will run fine under Mac OS X in the "Classic" environment. If that works, it's actually a better way to access to Mac OS 9 programs.

  • 27" iMac won't boot from anything BUT the main drive

    Hi all,
    My lovely 27" iMac is in perfect working condition, but I thought I'd try to install a OS on a large SD card to see if I would gain any speed.
    In the process of doing that (cause I never got that far) I discover that the iMac won't boot from the original install DVD. It simply spits out the DVD when I try to insert into the drive. I'v managed to make an image of the DVD (in a different mac) onto the SD card in order to try an boot from that. No luck. I've tried to insert a original install DVD from my Mac Pro into the iMac, which it reads fine and well, and when I tap the restart button it restarts, but stop with a white screen doing boot up.
    If I try to hold down the option key during startup, the iMac WILL let me choose which OS to boot from, but if I choose anything else than the OS already installed it freezes.
    I've even tried to boot my Mac Pro from the iMac install DVD - no problems.
    I've even run a hardware test on the iMac - no problems.
    I am running out of options fast! Please help a devoted Mac-friend.
    Take care.
    Peter

    I WAS using the DVD that came with the machine, but I fear Apple may have sent me the wrong one?
    In trying to solve the issues I'd tried other OS disc's (A Mac Pro install DVD and a OS X Leopard DVD) - but none of them would even boot, nor install of my iMac. I always end up with a white screen during boot up.
    As I described, the original iMac install DVD would indeed boot my Mac Pro, do the disc seems ok?

  • My iMac won't boot....Msg says "NO BOOTABLE DEVICE--INSERT BOOT DISK ...

    I don't know how to start my iMac up. I don't even know what a boot disk is! Several days ago I tried to run Boot Camp but couldn't continue because I didn't have a Windows program to install si I'm not sure what happened. Can somebody please help me out? Thanks.
    Dman- [email protected]

    My iMac won't boot....Msg says "NO BOOTABLE DEVICE--INSERT BOOT DISK ...
    Posted: Jan 17, 2011 11:44 AM  
    I'm getting this message again. When I restart using the option key everything is ok. When the computer goes to sleep it has the above message. Is there a setting I need to turn off so this doesn't happen all the time? Thanks.
    Dennis

  • My Imac won't boot up. It is stuck on apple logo with spinning gear.

    My Imac won't boot up. It is stuck on apple logo with spinning gear. It will not boot in safe mode, my install disc will not read and fsck wont fix it.. I can hear the hard drive spinning. So i know my drive is not bad.. Right before this happened i was low on space so i deleted a bunch of movies but for some reason i had to change my drive permissions to do so..

    Is your data backed up?  If not, see these means of data recovery: https://discussions.apple.com/docs/DOC-1689 If it is backed up, then purchase Alsoft Disk Warrior.  Boot it using the Option key of a wired Apple keyboard.

  • IMAC won't boot with USB card reader attached

    My quite new 24" iMAC won't boot if I have a USB card reader attached:
    I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
    I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
    The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
    Anyone have any ideas?
    Regards,
    Strathglass
    Message was edited by: strathglass

    Hello strathglass
    The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
    1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
    2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
    3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
    As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
    Dennis

  • IMac won't boot at first attempt

    Hi
    Recently I've been experiencing that my intel iMac won't boot at first attempt and I have to powerdown manually and then try again. Second time it boots just fine. It's usually in the morning (been shut off for the night), but not always. I've tried disc utility from the install dvd, have repaired permissions and reset the nvram and everything seems just fine. The thing is, this has happened after the 10.4.8 update as far as I can remember. Does anyone else see this or is it a coincidence and some other problem?
    Any thoughts would be appreciated.
    Best regards
    Rico
    intel iMac 20" Mac OS X (10.4.8)
    intel iMac 20"   Mac OS X (10.4.8)  

    Oups, sorry about that wrong quote - I've been reading to many discussions lately
    I've done all sorts of things today and I'm kind of curious to what is going to happen tomorrow morning when I boot up the mac. To sum up, here's what I've been doing:
    Installed 10.4.8 manually, downloaded from: http://www.apple.com/support/downloads/macosx1048updateintel.html Read somewhere that the stand alone installer might help.
    I ran repair permissions right after and got this:
    Permissions differ on ./usr/standalone/i386/boot.efi, should be -r-xr-xr-x , they are -r--r--r--
    Owner and group corrected on ./usr/standalone/i386/boot.efi
    Permissions corrected on ./usr/standalone/i386/boot.efi
    The privileges have been verified or repaired on the selected volume
    Ran repair permissions again to check - all was good
    Enabled automatically login in the accounts menu in user prefs - someone suggested me to do this, but I'm not sure what that might do, but hey, I'll give it all a shot.
    Changed resolution and then back again to highest possible. Apple suggests this when the problem occurs on the 17" iMac.
    http://docs.info.apple.com/article.html?artnum=303870
    Unplugged power cord for 30 secs and reset smu (G5 article/idea though)
    http://docs.info.apple.com/article.html?artnum=301733
    Used Onyx to delete the content of library > caches which I read somewhere could perhaps help.
    I'll post again tomorrow morning, and hopefully with some positive news

  • IMac won't boot after power failure during 10.5.6 update

    Help!
    Tried to update last night and at something like 80% install, we had a power cut. iMac won't boot at all now - get to a grey screen which tells me to restart. Don't have a wired keyboard. If I did - what are the steps to get this working again.
    I believe I have a good backup, but don't want to risk as all the family photos are on the iMac.
    Thanks in advance.

    Thanks for the help, but can't even get to a screen where I could type anything! I know I'm being dumb here.

Maybe you are looking for