My iMovie project staggers/skips over my transitions...I read that I need to optimize each clip. I did this individually and it worked but was time consuming. Is there a way to optimize all of my clips at once upon import?

When you import, the import screen should give you the option to optimize clips. Select Optimize - Full Size.
I think you can also right-click on the Event Name and it will let you optimize all clips in the Event, but I haven't tried it lately.

Similar Messages

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

Is there any way to see all the bookmarked pins at once in Map App?!

Hello!
I have been making a route for my next mountaineering trip using the red pins on the map app! i have like 20 bookmarks. I could see all the bookmarks at once and it was so nice. but after I searched another place all the bookmarks dissapeared. now i can see only one of the bookmarks at a time! is there any way to see all of them together again ?! please someone help I put so much affort to find the correct route...

Richard,
Is there any way I can simply list everything at once?
The best workaround I'm aware of comes courtesy of BMan1854: Create a Smart Playlist that will Match the following rule: Date Added is after 01/01/2001 (or whatever the day before the day that you first started your iTunes Library is). That playlist will show your entire library.
Or is there a way so that when I add new podcasts it will get rid of the old ones automatically?
Have you gone to the iTunes Edit menu > Preferences > Podcasts tab and checked out the various options listed in the Keep drop-down menu.

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT

Is there a way track who you have distributed the form to and who has responded? If yes, is there a way to message all that have not responded?

Is there a way track who you have distributed the form to and who has responded? If yes, is there a way to message all that have not responded? This would be a great way to manage supplier questionnaires to ensure everyone is providing information back to you.

FormsCentral, itself, does not have a method of distributing forms, so it would not know about your distribution list. It's either an open online form, which can be gotten to by anyone with the URL, or it's a pdf, which could be distributed via e-mail or a web page download.
You can always track the completion of the form by looking in the form's collected data set. Then, you could work backward to contact those recipients who have not yet responded. But that means you need to keep track of where the form was sent, or at least know which people/companies were supposed to get the form.
I hope that helps,
Brian

I have an ipod 5 and im changing my apple id. Is there any way to save all of my music and contacts?

i have an ipod 5 and im changing my apple id. Is there any way to save all of my music and contacts?

Why are you changing your ID?
iTunes/app purchases are locked to the account that purchased them. For some actions like updating apps you have to sign into the account that purchased them. Just changing the ID does not not delete any media from the iPod.
When you delete the iCloud account for the iPod should should be offered the option to leave contacts on the iPod. See:
https://discussions.apple.com/thread/3418775?start=15&tstart=0

I lost my iPod touch and now have a new one. Is there a way to transfer all the songs on have in iTunes onto the new iPod?

I lost my iPod touch and bought a new one? Is there a way to transfer all the songs I have in iTunes onto the new iPod? I am scared I will lose it all when I sync the new one or that I have to start all over. Please help!!

You can do better than that. You can click on the Restore button that appears under your device in iTunes. This will restore your iPod to factory settings as if it were fresh out of the box. But don't worry. By doing a restore, you will then be given the option to "Restore from Backup." This will allow you to restore the state of your previous iPod!!

Is there any way to sort ALL of my clips by date

I have tons of events and many of them contain different dates. Is there anyway I can have ALL clips, regardless of which events they are stored in, to be sorted and presented chronologically? I have iPhone, iPhoto, Aperture, etc clips all over the place and I want to organize them. The latest version of iMovie is making organization HARDER not easier! Does Final Cut Pro have this feature?
I have less interest in making movies than I do watching the clips that I've taken, over 14 years, of the kids, in chronological order. HELP please!!

hi, Jamie Wiseman
I think my question wasn't clear.
what i am asking for i want to copy parameters itself as parameter to another report , not just parameter field name.
I put some picture about where i want please check attached.
As you see there is export function inside of export but i dont want to do this procedure of each of my parameters , i want to export them at once.
SO do you have any idea for this

Is there a way to see all my compound clips created on the timeline, in the browser as an accessible thumbnail list....?

I am facing a problem that
due to big footage I first extracted the seemingly fine clips in chunks in one timeline in various layers which is still enormous for my RAM
now I have to take out smaller and more appropriate bits from this timeline
I have opened another timeline where I just copy paste the best shots from my previous enormous timeline and this works fine due to less media for 6gb RAM mac pro
but it is really tedious to go back and forth to copy paste
it would be so wonderful if I could extract those bits from the clips just like we do with any other new footage from the browser window with all the clips visible
I think one way can be to export these compound clips seperately and import them as events into the browser but that would be a generation loss
is there any other way.....? to view these compound clips infront of my eyes all at once or keeping all that footage on the timeline besides the finalising layer is the only option...?
I am facing this rare problem because I'm editing a music video and no shot is more than 2 seconds and that too from several groups of footage that has to be mixed.....so all the data has to be visible to decide if a bit of guitar piece would look good here or drums or close up or long shot.....so everything has to be seen....can you suggest me a smarter workaround please ?

Thank you.Ok say for e.g.
500 video files imported in fcpx
800 clips extracted from these obviously on the timeline and joined/compounded according to their content in say 15 layers according to 15 instruments used ,so now just to see the entire usable footage ....
now one 7 minute song sequence has to be made where bits would be simultaneously taken from these 15 layers as all instruments are playing simultaneously
these shots are not more than 2 secs each according to the beat........
when I try to work with these 15 layers as well as the Final primary layer that I'm making in the same timeline my fcpx becomes slow
but when I drag individual layer to individual timelines it is fine so that is the only option
but now for every 2 second bit I have to go back to the 15 layered timeline and find one single suitable shot
So I was wondering is there a way to be able to see these layers and clips on the timeline in the browser in a systematic fashion like the way we get with keywords ?
and keywords can only be used in the imported clips already in the browser ,and not after we drag it on the timeline.....
Till now I think exporting and importing back is the only option ...but is there another work around ?

Rs to do, and I selected the font for each 4s clip - now I want to change the font - is there a way to change all fonts on clips in one go?

Hi I am new to iMovie - and made a 35min film - quite pleased with it - I sub-titled it right through coz we work with deaf people - wanted my first movie to be accessible. Now I want to change the font on each clip - can I do this in one step - and change all the sub-titles to a different font - thanks a lot, Jane

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

Is there a way to delete all photos from phone at once, or does it have to be done individually?

How can I delele all photos from my iphone? Can I delete all at once, or do I have to go through and delete each one-at-a time? I'm trying to free space for more photos, and they are already in the cloud and on my computer. Thanks

Are these photos in your camera roll? If so, you can't delete them using iTunes, & if you've already imported them to your computer, but left them on your phone...you're not clear on that...I suspect whatever program you used to import them doesn't see them anymore...is that correct? If so, you'll have to either mark to delete one at a time, or use third-party software to delete them.

Is there a way to download all of my music at once from the iCloud

I have uploaded my music to the iTunes Match and would like to download all of the music from the cloud onto my new laptop. Is there a faster way to do this than clicking on songs one at a time? I alread tried holding shift and clicking with multiple songs highlighted.

I did this with a playlist that has over 6000 songs, but the "download all" feature seems to only download 100 songs at a time. After that, the rest of the songs just stay with the spinning icon, but never start. I turned off the auto lock feature, and am leaving my iPhone on the charger, and it still happens. I hit the download all button, nothing. I quit and try again, nothing. I have to restart my phone in order to download the next 100, and so on it goes. I even tried turning off iTunes Match to sync music the old fashioned way, but iTunes will not let me sync my music. I tried to manually manage my library, and only 16 of my 6000+ songs transfer. The rest of the music is greyed out, with a dotted circle symbol next to the rest of my library. Music was not purchased through iTunes, so Authorization should not be necessary. I am at a loss. Any help is greatly appreciated.

I have three airports connected to my computer but when i ask for multiple speakes on the streaming section it only allows two of them at a time.. is there a way to have all airports streaming at the same time to different speakers.

when i hit the multiple speakers option on streaming music in itunes to my airports which i have three connected, it only ever brings up two maximum plus the computers internal speaker as an option. how do i configure the computer t allow all three airports to stream the itunes content

when i hit the multiple speakers option on streaming music in itunes to my airports which i have three connected, it only ever brings up two maximum plus the computers internal speaker as an option. how do i configure the computer t allow all three airports to stream the itunes content

Is there a way to email all texts made between someone and myself at one time?

It's a pain to email one text at a time. Is there a way to do all of them at once? Thanks

I don't see a way on my ENV3 other than one at a time but I wonder if smart phones are capable of this. Mary

Is there a way to view all cameras in the timeline at once without creating a multicam sequence?

Is there a way to view all cameras in the timeline at once without creating a multicam sequence? Is there some kind of window I can open where they will show up? I am scrubbing a timeline and I would like to see all the cameras at once.

The multicam monitor only shows multiple clips at once when they are part of a mutlicam sequence. is there some reason you don't want to use them inside a multicam sequence for previewing?
Here is a possible workaround, if your workflow circumstances will permit it:
Apply a pip preset effect to each clip in the timeline. Use UL, UR, LL, LR presets and up to four video tracks will display at once. If you need to see more than that, you'll need to tweak their position parameters by hand. When you're done previewing them all at once you just need to delete their effects from the Effects Controls panel.
I know it's not that neat or quick, but it will let you see everything at once in the program monitor.

My iMovie project staggers/skips over my transitions...I read that I need to optimize each clip. I did this individually and it worked but was time consuming. Is there a way to optimize all of my clips at once upon import?

Similar Messages

Maybe you are looking for