My iMovies do not appear in the iMovie theatre on my other IOS  devices.

I have iMovie on my iPhone 5 running IOS7. I want to view the movies I create on my AppleTV. Nothing appears in the iMovie Theater on my AppleTV. When I go to upload to iCloud an error message says it cannot connect and that I need to add iMovie to the Documents area of iCloud. The instructions tell me to look in the Apple menus. My desktop is a Windows machine therefore I use the iCloud control panel which does not gave that selection in documents. Neither does my iPhone settings for iCloud. Do I need a MAC to set this up?

Called Apple. They suggested I check my iPhone for any Policies installed my employer. Sure enough there was an IOS Restriction policy that prevents uploading documents to a cloud. Guess I'll be able to fully use iMovie when I retire.
Thanks for trying to help. 

Similar Messages

  • HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

    I'm new to this and I think I typed a long heading!
    Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
    I've searched the web but all asume iTunes can see the device.
    Help!?

    Hi David,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

    I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
    Thanks
    Pheona

    Greetings Pheona,
    That appears to be a hard drive based camecorder.  Usually these mount on the desktop of your computer as a little white hard drive icon.  If you go inside you should be able to find the movie files the camera is saving.  See what format they are (the last 3 letters at the end of the file name is a good place to start).
    You can drag the movie files from the camera hard drive to the computer to copy them.  Then convert them with a video file conversion program to a format iMovie can understand.
    Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
    In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4".  Then import the resulting file into iMovie and see if that works any better.
    If that program can't convert the files you can try another file conversion program:
    http://www.southpolesoftware.com/iVI/iVI.php
    http://shedworx.com/voltaichd
    http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
    Hope that helps.

  • My camera will does not appear in the drop down for importing videos even though it is listed as a supported camera - sony hdr-xr260

    I am trying to import video footage from my sony camera on to imovie. The camera does not appear on the drop down when i connect it to the pc via usb. Anyone any ideas?

    I'm using a zr500 via firewire and it doesn't recognize it either. Are you using firewire?

  • My pics and videos do not appear in the video browser?

    my pics and videos do not appear in the video browser? How do I get it back. I may have denied IMovie access to my pics and videos when opening the app for the first time.

    I have the same issue (iPad 3, iOS 6).  I have tried to:
    -erase all projects on the iMovie
    -reset the iPad
    -uninstall iMovie and reinstall it
    None of these three things worked and I am at lost in terms of what else can be done.
    All that happens when I start a new project is that under "videos" there is a big black box (empty videos).  Same thing for pictures.  When I press the camera button to insert a video from the camera, this works no problem.  However, I used to be able to insert videos/pictures from my Camera Roll.

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • Cross Reference Sources appearing in Story Editor view but not appearing in the Cross Ref pane

    I have imported a Word document containing working cross references into an InDesign document. The vast majority of these cross references import correctly and link to their destinations within the document, however there are some that are not working. If I view the text frame in the story editor view, I can see these "broken" cross reference sources that came in from the Word doc but on selecting them I can see that there isnt a corresponding entry for it in the cross reference pane. As said, there are only a few that are behaving like this.
    What could be causing these not to appear in the cross reference pane?
    Obviously as they are not appearing in the list of cross references I can't update them, and also, as they are technically broken cross references, because a source exists for them but there is no corresponding entry in the pane, then on export to epub, InDesign crashes (If there is one broken cross reference in a document, export to Epub will crash indesign).
    Also, to clarify, in the Word doc if I navigate to a cross reference that is failing once in InDesign, I can update it properly, and also navigate to its destination in the Word doc, so it's not as though these cross references are broken before coming into InDesign. Also I believe the destinations for these "broken" cross references are coming across properly to indesign too as I can see them in the story editor view.
    Supposed Cross Reference source selected in Story Editor view on left, but no corresponding cross reference highlighted in pane on right:
    Technical Details:
    InDesign CS5.5 - Version 7.5.3
    Microsoft Word 2010, File type .docx

    I have found the possible cause of this problem!
    If a table is used within the Word document somewhere between where the cross reference source is and its destination then that particular cross reference will be broken as described above in my initial post.
    So the "fix" is to remove any occurances of a table in the Word document and the cross references come into InDesign perfectly. This is actually not a fix at all. I need to use tables in the Word document for layout purposes so if they break cross references if they stand between them and their destinations then I have to compromise, i.e. use tables but with no cross references in the document or vice versa.
    I found a similar issue recently with index markers in Word causing a shift on the cross reference tags when bought into InDesign. The "fix" again for that was to remove all index markers from the Word document. See post about this here: http://forums.adobe.com/thread/1043981
    InDesign really needs to sort out the issues with importing of Word documents with cross references in them. If I can't use index markers and tables in a Word document without breaking its cross references then they can't claim to have the ability to import a Word document while maintaining its cross references into an InDesign document. It just doesnt work as ive painstakingly proven.

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • Urgent:SUS PO not appearing in the PO list for vendor's user

    Hi experts,
                       I am working on SUS. SRM5.0 single box scenario. PO is created by the purchaser and is successfully transfered through XI. But this PO is not appearing in the PO list of vendor's user. Please let me know what can be the possible reason.
    following roles are given to the user:-
    SAP_EC_SUS_ADMIN_PURCHASER
    SAP_EC_SUS_ADMIN_VENDOR
    SAP_EC_SUS_BIDDER
    SAP_EC_SUS_DISPATCHER
    SAP_EC_SUS_INVOICER
    SAP_EC_SUS_ORDER_PROCESSOR
    SAP_EC_SUS_SERVICE_AGENT
    SAP_BBP_STAL_BIDDER
    SAP_EC_BBP_BIDDER
    Also checked vendor data. Communication method is selected as XML.
    After creating PO and transfering it - message comes-
    Information  Processing BBP_PO_SEND_XML Is Started  
    Information  Action successfully completed 
    Please help. It is very urgent.
    Thanks and Regards
    Kapil

    Hi Kapil,
    do you have the same result when deleting all roles and only using role SAP_EC_SUS_ORDER_PROCESSOR?
    Are vendors successfully replicated into SRM and a user created via Web
    Txn "Manage Business Partners"?
    Did you maintain table BBP_MARKETP_INFO?
    Did you replicate the company code using Txn BBP_SUS_BP_ADM?
    In any case there is also an inital replication of vendors
    from MM to SUS via BD14 necessary.
    Thanks,
    Claudia

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    Press the escape (esc) key to exit full-screen mode.

  • HT1414 HOw do I back up and restore If I plug my ipod in and it does not appear in the devices column. I have a white screen and i'm trying to fix it and nothing is working :(

    How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help

    Take it in for repair/replace to your local Apple retailer.

  • Excise Tab is not  appear in the MIGO display  --- Import Process

    Hi Experts ,
    Excise tab is not appear in the display of the material document in Import process.
    Process flow.
    1. Import Po.
    2. Customs clearing (MIRO)
    3. Capture excise invoice against the Import Po.(Reference to MIRO document )
    4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
    after posting the material document , excise tab is not appearing against  the material document .
    5. post excise against the excise invoice .
    Please help.
    Thanks
    SAP MM
    Edited by: Subbas on Aug 16, 2010 11:58 AM

    Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
    Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
    Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
    Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
    5. Incoming Excise Invoice capture at Blocked stock 103 is not
    supported in CIN.
    The capture of incoming excise invoice is strictly advised to carryout at
    unrestricted stock and not at blocked stock(103/105) due to architectural
    issues. The capture at blocked stock may cause wrong excise posting.

  • The word "ORIGINAL" is not appearing in the print out of documents

    Hi,
    For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
    Thank you,
    eric

    Hi Eric,
    The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
    The solution is to chnge that remarks in the PLD to text "Original".
    Cheers

  • I can´t sync my iphone, it do not appears on the itunes screen, what can i do?

    i can´t sync my music to my iphone beacause it do not appears on the itunes screen, i have do all the itunes support but it doesn´t help me.

    Please Click on the 'Print Screen' for better view.

Maybe you are looking for