My Invert command won't work.

I am having a difficult time. My invert won't work, not even when I run actions. I am very frusterated. Please help.

Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

Su command won't work in MBA 2011 Lion 10.7.1

Hi All,
I have an iMac, 3 MBPs running Lion and Snow Leopard. In all of them, su command works just fine and of course I had no issues with them for many years.
I just bought a MBA 2011 and it came with Lion 10.7 which I updated to 10.7.1. The su command just simply refuses to work. It display 'su: sorry' as if I typed the wrong password.
1) I tried my own account password which is an administrator. Didn't work
2) Enable root account and set the password. Didn't work (I checked in my all other machine, don't need to enable root as the 'enable root' is still avaialable where as if it has been enabled only 'disable root' option will be displayed
3) Created another account (admin) also didn't work.
What did I miss here?

On the logs:
2:36:25 AM su: BAD SU (username) to root on /dev/ttys000
Just reformat my system and restore with fresh un-updated stock Lion, still the same issue.

Dictation Commands won't work with Word

The enhanced Dictation Commands work but not on Word. It does recognise some of the commands, but mostly it just turns them into text. Has any one else experienced this or got a solution?

I have just installed Rh10 for Word on a new machine and initially I got this message.
I wonder if you have followed those instuctions? I changed the setting to Enable All.
The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Send Unix command won't work under 10.2.8

So I am running this command in a lab of 10.2.8 machines. I go to send Unix Command then I put this in:
Send Unix Command
user: root
osascript -e 'tell application "System Events" to keystroke "map"'; \
osascript -e 'tell application "System Events" to keystroke tab'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke "map"'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke return'
Then I check Display all output.
Then I check Run command as User: Root
Then I send it.
After that in the Display all output shows me this.
cms132-30 (64.8.180.103)
/bin/bash: Send: command not found
/bin/bash: user:: command not found
execution error: System Events got an error: NSCannotCreateScriptCommandError (10)
execution error: System Events got an error: NSCannotCreateScriptCommandError (10)
execution error: System Events got an error: NSCannotCreateScriptCommandError (10)
execution error: System Events got an error: NSCannotCreateScriptCommandError (10)
So I close that window and see an error message by that machine that says:
Error: 1 "execution error: system events got an error: NSCannotCreateScriptCommandError (10)"
So what is wrong with this? It works fine with 10.3.9 but not with 10.2.8
Imac Mac OS X (10.2.x)

It doesn't appear that the System Events under 10.2.x responds to the keystroke command (it doesn't appear in the AppleScript Dictionary.)

UPDATE sql command won't work

Hi,
I have troubles using UPDATE command. I have ACCESS database and a table created by
create table ACCOUNTNAMES (ACC_ID VARCHAR(30) primary key, ACC_NAME VARCHAR(40), ACTIVEPASSIVE VARCHAR(30))accessed by
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conection = DriverManager.getConnection("jdbc:odbc:mydatabasename", username, password);
statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
resultSet = statement.executeQuery("SELECT * FROM ACCOUNTNAMES");
// Working with resultSet
statement.executeQuery("update ACCOUNTNAMES set ACC_NAME = "TEST" where ACC_ID = "60"");I have SQL exception at this point saying
"[ODBC MS Access Driver] Too few parameters. Expected 2"
I have a row with ACC_ID = 60 in the table. "Expected" might also be 1.
Please give me your advice.

statement.executeQuery("update ACCOUNTNAMES set ACC_NAME = "TEST" where ACC_ID = "60"");Is TEST a variable nameif so you have to concatenate it
try the below stmt. to update the ACC_NAME as TEST.
statement.executeQuery("update ACCOUNTNAMES set ACC_NAME = 'TEST' where ACC_ID = 60");

SYMLINK won't work with space in folder name

Using Terminal commands, I can create a SYMLINK for OS folder if there is no space in folder name, such as -
sudo rm -rf ~/Library/Mail/
ln -s /Volumes/Mr._Mac/Mail/ ~/Library/Mail
But if there is a space in the OS folder name, commands won't work, such as -
sudo rm -rf ~/Library/Application Support/AddressBook/
ln -s /Volumes/Mr._Mac/AddressBook/ ~/Library/Application Support/AddressBook
Terminal returns the following message -
ln: Support/AddressBook: No such file or directory
Is there some sort of symbol that needs to be used instead of a space so that Terminal reads the folder name as one word?
I've tried % which is used for HTML, but that doesn't work.

Put the entire path in single quotes or put a \ before each space. If you drag a file or folder from the Finder, it'll automatically supply the correct path.
(77913)

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

This any help?
http://support.apple.com/kb/HT1526

Updated to 10.8.5 and now app store won't work?

I have just updated my Mac 10 version 10.8.5 and now it is saying that the App Store won't work with this version. Itunes also won't open as this obviously hasn't updated properly either.
Has anyone else had this problem? I don't seem to be able to reinstall the App Store either?

Try the following....
Mountain Lion Recovery
Boot up from your computer by holding down the command+r keys. This will take you to the recovery drive.
Select Disk Utility & hit Return.
In Disk Utility select the HD on the left & click on Repair Disk (bottom right).
When done, repair permissions from your desktop DU and restart your computer. Check SU for further updates.
Post back your results.

Javascript won't work - JavaScript for Reader Mobile API Reference (Android)

I have created a Form with the new Adobe Acrobat Pro DC (trial version).
The Javascript code just won't work on a mobile phone.
Doc - JavaScript for Reader Mobile API Reference (Android this shows that what I want to do is supported.
But not even the simplest command will work on my phone. (I am using Adobe Acrobat DC - PDF reader for Android)
Any suggestions of what I could be doing wrong?
Best,
Menno

A Doc.getField() should work.. Try small steps: Create a document with two fields (e.g. Text1 and Text2), then create a custom calculation script for Text2 that uses the following code:
event.value = this.getField("Text1").value;
Does this copy the data you enter in Text1 to Text2?
Then, add a third field ("Text3") and a button with the following MouseUp JavaScript action:
this.getField("Text3").value = this.getField("Text1").value;
Does this work? It actually works for me. To save you some work, here is a link to the test file I've used: http://khkonsulting.com/files/AUC/AndroidTest.pdf

My wireless keyboard won't work for one of the users

All of a sudden the wireless keyboard stopped working for me, but it works when my wife logs in. I had to create a new account for myself and the keyboard now works. However, the keyboard won't work for my original account. Any thoughts?

Does it shows up as a device in your BT menu under the problematic user? Does it connect? If you delete it from your admin account and re-pair it, does it work?
There is a command called ioreg, which can help as well.
Here is sample output from ioreg -lw0 | grep -i keyboard
      |   | +-o AppleBluetoothHIDKeyboard <class AppleBluetoothHIDKeyboard, id 0x10000372d, registered, matched, active, busy 0 (4 ms), retain 10>
      |   |   |   "Product" = "BT-Keyboard-AL-i71"
      |   |   |   "PoweredOffNotificationType" = "KeyboardOff"
      |   |   |   "CFBundleIdentifier" = "com.apple.driver.AppleBluetoothHIDKeyboard"
      |   |   |   "IOClass" = "AppleBluetoothHIDKeyboard"
      |   |   | |   "Product" = "BT-Keyboard-AL-i71"
      |   |   | +-o AppleEmbeddedKeyboard <class AppleEmbeddedKeyboard, id 0x100003734, registered, matched, active, busy 0 (0 ms), retain 10>
      |   |   |   |   "IOClass" = "AppleEmbeddedKeyboard"
      |   |   |   |   "HIDDefaultBehavior" = "Keyboard"
      |   |   |   |   "Product" = "BT-Keyboard-AL-i71"
      |   |   |   |   "FnKeyboardUsageMap" = "0x00070050,0x0007004a,0x00070052,0x0007004b,0x0007002a,0x0007004c,0x0007004f,0 x0007004d,0x00070051,0x0007004e,0x00070028,0x00070058"
      |   |   |   |   "NumLockKeyboardUsageMap" = "0x00070029,0x00070029,0x0007002a,0x0007002a,0x0007002b,0x0007002b,0x0007003a,0 x0007003a,0x0007003b,0x0007003b,0x0007003c,0x0007003c,0x0007003d,0x0007003d,0x00 07003e,0x0007003e,0x0007003f,0x0007003f,0x00070040,0x00070040,0x00070041,0x00070 041,0x00070042,0x00070042,0x00070043,0x00070043,0x00070044,0x00070044,0x00070045 ,0x00070045,0x0007004a,0x0007004a,0x0007004b,0x0007004b,0x0007004c,0x0007004c,0x 0007004d,0x0007004d,0x0007004e,0x0007004e,0x0007004f,0x0007004f,0x00070050,0x000 70050,0x00070051,0x00070051,0x00070052,0x00070052,0x0007000d,0x00070059,0x000700 0e,0x0007005a,0x0007000f,0x0007005b,0x00070018,0x0007005c,0x0007000c,0x0007005d, 0x00070012,0x0007005e,0x00070024,0x0007005f,0x00070025,0x00070060,0x00070026,0x0 0070061,0x00070010,0x00070062,0x00070037,0x00070063,0x00070082,0x00070082,0x0007 00e0,0x000700e0,0x000700e1,0x000700e1,0x000700e2,0x000700e2,0x000700e3,0x000700e 3,0x000700e4,0x000700e4,0x000700e5,0x000700e5,0x000700e6,0x000700e6,0x000700e7,0 x000700e7"
      |   |   |   |   "CFBundleIdentifier" = "com.apple.driver.AppleHIDKeyboard"
      |   |   |   |   "HIDEventServiceProperties" = {"HIDKeyboardModifierMappingPairs"=()}
      |   |   |   +-o IOHIDKeyboard <class IOHIDKeyboard, id 0x100003737, registered, matched, active, busy 0 (0 ms), retain 9>
      |   |   |   | |   "HIDKeyboardRightModifierSupport" = Yes
      |   |   |   | |   "HIDKeyboardKeysDefined" = Yes
      |   |   |   | |   "Product" = "BT-Keyboard-AL-i71"
      |   |   |   | |   "HIDKeyboardCapsLockDoesLock" = No
      |   |   |   | |   "HIDKeyboardSupportedModifiers" = 33431807
      |   |   |   | |   "HIDResetKeyboard" = Yes
      |   |   |   | |   "HIDParameters" = {"HIDKeyboardModifierMappingPairs"=()}
      |   |   |   | |   "HIDKeyboardModifierMappingPairs" = ()

Mac book pro is stuck on installing snow leopard. won't work.

i recently was mucking around with my mac book pro and soon found my self stcuk with the installation of the 'snow leopard mac OS X' no matter what i did it just wouldn't go away, all i wanted was for my laptop to just go back to normal and get back to what i had been doing only a few hours ago but nope nothing, not even the snow leopard would download to finish things off. so i contacted apple support whom we spent about an hour chatting with. that was basically hopeless, they were very nice but they just didn't know what they were doing, and best of all they wanted to charge me. so at the very ending when they told me that my hard drive was fried and there was absolutely nothing i could do but to get it taken to an apple store and pay for them to replace my hard drive i asked them if i should do the online repair thing, and he told me no i shouldn't its just a waste of time and it won't work. so i neglected him told him a thank you and guess what, i got it to work. now my laptop is good as new and i didn't need to pay to get the hard drive replaced. lol. ok so for the people who are facing this oh my gosh its such a headache but we can do thins. so write these steps down and i promise they will work and you don't need to pay to get your perfectly fine hard drive replaced. ok so shut down your laptop completely. then when its completely off. hold don't the command button and R hold them both down and then at the same time press the on button keep holding them, you can take your finger off the on button but keep the others on the command and R until a white screen appears it will ask for wifi and then it will reset everything for you like when you first got your laptop. just follow through the instructions they give you and all is well. i hope this was help full for you if this happens.! (btw i can't remember if it was command and R or the option, alt button and R but just try the command one first and if that doesn't work then the other one)

Hello roscomom,
The following article details a number of steps that may be helpful in getting your TV working with your MacBook Pro again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

BUG - Indexing Options keep pointing to D drive rather than the C drive - search charm won't work

So I noticed that the search in my Windows 8.1 simply won't work to find files and settings. Then I went to Indexing Options in the Control Panel and I noticed that one of the locations Indexing was trying to point to is:
D:\ProgramData\Microsoft\Windows\Start Menu\ (Unavailable)
This is odd since this is not the location of the Start Menu (which is in the C drive, not the D drive).
So I went on to remove this location and manually add the location of the Start Menu in the C drive (i.e. C:\ProgramData\Microsoft\Windows\Start Menu\).
To my surprise, adding the location in the C drive is actually listed as the D drive -- not the C drive. In Fact any directory I try to add to the Index located in the C drive is in fact listed as being in the D drive!
I'm at a loss here, and in fairness I reckon this is a bug.
Have anyone here ever experienced this? Is there any workaround?
EDIT: While the search does not work. It seems like the Windows Explorer search works without any issues.
Also I reckon it is worth mentioning that I change the location of my search index to the D drive. This is because my C drive is a Solid State Drive, while my D drive is a traditional Hard Drive.
Thanks in advance for the help.
Regards,
P.

Hi,
I made a test in my fresh building Windows 8.1. Create a new drive and a new folder in it. After that, add the folder into Windows Index Location. When I delete the folder, its shows up as the screenshot below:
As you can see, it's same with yours, If I choose uncheck the Index folder and reopen Windows Index Location, it would be dispare from this panel.
While for your problem, actually, move the index location is no difference to your Windows search, it just change search file location.
To identify if this is a disk drive problem, you can opt to use Diskpart command to check your drive letter if it was correct.
Open Command Prompt with admin, then type diskpart.
Afer that, type list volume, check current disk label.
Roger Lu
TechNet Community Support

Speakable Items won't work with my headset

Here's the deal:
When I am using the internal microphone with Speakable Items, everything works fine. (I have to lean in a bit, obviously.) But no matter what I do, my computer won't understand commands spoken through my bluetooth headset. My OS is up-to-date (10.4.10).
The headset (Plantronics Voyager 510) pairs fine with my computer, an iMac G5, and appears to work perfectly well as an input device: the readout in the Sound preference pane shows that the computer can hear my voice through it. In fact, when I go to the "Speakable Items" tab in the Speech preference pane, choose the headset (which appears as "PLT 510"), and attempt to calibrate it, the blue, green, and red readout in the Microphone Calibration window also registers my voice.
But no matter where I set the slider, no matter where I am in relation to the headset microphone, and no matter at what volume or speed I speak, the computer will not recognize commands. It can hear my voice — which I keep in the green zone — but won't understand it.
It's not just in the calibration window: it also won't work when trying to use Speakable Items in, say, the Finder. I've tried changing the input volume for the headset in the Sound preferences, having my room totally silent (including shutting off the air conditioner), calibrating with Speakable Items set to "on" and "off," and weeping and begging. I even rebooted. Nada.
Again, Speakable Items works fine when I am using the internal microphone. The one other difference I found in their behaviors is that, with the calibration slider set to low and the room silent, the internal microphone is steady at the second green bar; but the headset under the same conditions is steady at the sixth bar. In fact, in the case of the headset, moving the slider has no effect at all: it always rests on the sixth bar.
(In other news, the headset won't pair with my iBook G3 [Dual-USB] using the D-Link DBT-120 [Rev. B3]. But I guess that's a different issue altogether.)
Googling, I see plenty of happy Mac users who own my model of headset, but I can't find this problem addressed anywhere. I've looked through the forums here as well.
Thanks for reading! Can anyone help?

Sorry for the slow reply, Philip!
First of all, Macs do not yet interact in stereo with Bluetooth headsets, though according to rumour this will be available in Leopard (along with everything else).
Have you tried using the Skype Test Call feature? This is one of the easiest ways of listening back to what you record. Come to that, does it record into one of the more standard sound apps (e.g. Garage Band, Audacity, SndSampler)?
My wife has a Plantronics 590 Bluetooth headset, but when it is interacting directly via the Mac's Bluetooth she can only get the microphone to work with Skype and the Finder. And iTunes outputs only the left-hand channel, evenly split between the two channels, and the quality is horrible. If she wants to use it for any other purpose she has to connect it via the Bluetooth 3.5 mm jack adapter plugged into the headphone socket, which cuts out the headset mike as well as the internal speakers.
Though VoiceOver does work through her headset, without using the adapter, the quality is awful and VoiceOver keeps crashing. She can, however, use it for Speakable Items, though she often has to repeat herself. The calibration had to be set very high — 100% mostly.
Have you gone through the full calibration sequence, including getting all the test commands to flash?
Keep us posted!
Archie

External links won't work once published

Hi, I'm self taught so don't always understand everything and I'm a complete novice with iWeb, used Front Page before getting a Mac.
I'm in the process of building a new website using iWeb and I'm having problems with getting links to external pages to work. They work fine in iWeb. 'Enable as a hyperlink' and 'make hyperlinks active' is ticked for all links. I've formatted the links to be coloured red, then orange when visited and blue with an underline on roll over, grey if disabled. All works fine in iWeb but then when I publish the links won't work. They will momentarily and then they won't. If I refresh the page then one or two will work but when you go back to the page they won't work again. I've deleted them all and redone them, still the same problem. Tried it in Safari and Firefox, same problem. Deleted the site from the server and republished, same problem. Anyone got any ideas?
On the page in question I have a widget to SkyScanner, thought that was maybe causing a conflict. Deleted it and republished, same problem.
Here's a link to the page I'm having problems with http://www.marbella-rentals.co.uk/MarbellaRentals/flights.html and it's the links to airlines on the right that I can't get to work.
Also I have another couple of questions. How do you resample images? I have used a background image on the pages and I've managed to get it to stay static by altering the code slightly but don't know how to resample it so that the page will load quickly. Ditto with all the rest of my images. Don't want to have to resize them all manually if possible. Also, with the background image I don't know what size I should make it if I was to do it manually.
Last question... How do you change the title of your page and add a favicon?
If anyone can help me would be much appreciated.
Thanks

You have an image covering some of the hyperlinks - GraphPaper_01_3.png
Do a Command A on the iWeb page to find it.
Your background image seems to load OK. Use an optimizer to to get it and the whole site to download faster...
http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html
See this page for howw to add a favicon...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
To add title tag and meta description you need to open each HTML file post publishing and add them with an editor app. More conveniently, you can use iWeb SEO Tool...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
Here's a checklist for the publishing workflow if you are adding SEO tags and Optimizing...
http://www.iwebformusicians.com/Search-Engine-Optimization/Website-Publishing-Wo rkflow.html

Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

My Invert command won't work.

Similar Messages

Maybe you are looking for