My ipad is locked up, screen shows photo stream. Tried hitting ignore or settings and neither work. unable to use ipad, screen froze.
ipad is locked up with photo stream showing on the screen, can not turn off or use it at all.
Hi BonBonW,
Hold down the Home button and the Power button and continue to hold them down until the Silver Apple appears. This will reset your phone (no data will be lost or altered).
Cheers,
GB
Similar Messages
-
I'm restoring a new iPad 2 (shattered the original). Backed it up on the iCloud and have restored all apps, music, photo albums, etc. However, the photo stream has not activated, so no photos have downloaded. Photo Stream is fine on my Iphone and Mac.
Hello there, Tamghosh.
The following Knowledge Base article provides some good steps to use for troubleshooting the issue you're describing:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Particularly:
I don't see photos in Photo Stream on my iOS device.
Check the following:
From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.
From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Hi,
My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC that's missing the photos.
When I open the iCloud control panel, I cannot turn on the photos. That option is ghosted. I'm running on Windows 7 with iCloud 3.0. Any ideas on how I can fix this? All help is appreciated! Thanks!Hi Kevinmvb,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may have moved your photos out of the Uploads folder where they need to reside.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
- Judy -
When I connected my iPhone and iPad via iCloud not all photos in my photo stream copied over. Why not and how do I fix it?
Welcome to the Apple community.
Only the last 30 days of photos are kept in photo stream in the cloud for syncing. Devices that have been syncing with photo stream for some time may retain older photographs that newer devices do not receive from photo stream. -
Can I control which of my devices shows photo stream
can I control which of my devices shows photo stream? I want to be able to store my photos privately in iCloud. I have my sons iPods synced to my iTunes Library but do not have my pictures on their devices. Can this be in the iCloud without going to all devices?
The only way to prevent a device from showing your photo stream photos is to either go to Settings>iCloud and turn off photo stream on the device or to not share the same iCloud account with the device. If you want to turn off photo stream on your son's iPod you can then go to Settings>General>Restrictions, set a restrictions passcode, then go to Accounts (at the bottom) and set to Don't Allow Changes. This will prevent him from changing this setting without the passcode. (If you do this, be sure to write down the restrictions passcode. If you ever lose it, the only way to remove it from the device is to restore it as a new device, without using the backup, losing all data and start over.)
-
i want to use photo stream on my computer from iPhone and iPad, but I cannot click on the photo stream capability in Preferences. . I have LION IOSX
What version of the OS and of iPhoto and of IOS
LN -
My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?
when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have just upgraded my Ipad to IOS 5 and I am unable to use my applications
I have just upgraded my Ipad to IOS 5 and I am unable to use my applications.
The applications appear in the screen, but when I tap on any one of them, they do not open.
Can some one tell me what to do to be able to use my application again?Sorry, I'm reposting this because of spelling error in my previous post (I must turn that 'auto-correct' off).
Since I posted my questions, the only thing I figured out was to turn the 'iCloud' in the Settings on and now the plus sign is on and all my previous appointments appeared. While this is a solution, what if I don't want to use iCloud? But I'm happy for now that my Calendar works. -
On my Photo Stream there is no TRASH icon, so I am unable to delete photos.
On my ipad Photo Stream there is no Trash icon, so I am unable to delete pictures. Any suggestions?
BillYou delete them from the device that took them or remove them from your Photo Stream:
http://support.apple.com/kb/ht5125 -
I accidentally selected "do note allow" Pages access to my photos. Now I can't insert photos. Message says go to settings and select Privacy - but there is no such option in the Settings. Help! I want to be able to insert images in documents I create in the Pages app.
Ok - I figured it out myself as soon as I posted this question. I went to my IPad settings - not the Settings in the Pages app. Problem fixed.
-
i think my iphone 4s has a damaged software because it locks the phone always and powers it off without touching the power button. how can i rectify this problem?? i already tried erasing all the settings and content of the phone. thanks..!
This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3. -
Please help! i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have. I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ???
Did you buy this iPhone new from an authorized seller?
-
Since the update the first Firefox window I open refuses to open tabs, only new windows, and all refuse to show my bookmarks toolbar. All Sync settings and account seem lost.
G'day again, I've also lost the option of a 'Stop loading' or 'Refresh' button.
-
I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
LoredanoThese are the options you have.
Budget $1299.
http://www.apple.com/macbookair/
http://www.apple.com/macbookpro/
Best. -
Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and making sure I'm only set up to receive iMessages to my cell number and not my email....but that didn't fix the problem.
Here the way to do it, for both, or for only one Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.
Maybe you are looking for
-
Error Message when installing updates: "Cannot open file (-3001)"
I have a MacBook3.1. with Mac OS 10.5.7. Three days ago I installed 5 to 6 updates for iTunes, iDVD, AirPort Express, Java, etc. After the installation, I could not access the internet because my AirPort wireless on the Mac was off (non-existent). I
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
-
ABAP : How to select a line in a table control
Hi everybody, I have a multi-item Contract (2 items: item 10 and item 20) I store the contract items informations in an internal table wt_ha I want to call a transaction that can assign the quantity of an order item to contract items. Here's the code
-
Imcoming Payment DocNum does not match the corresponding JE DocNum.
Dear Experts, I have a SBO database in which the setting "Use one series for multiple docs" is set to yes. In this database, when I save say Incoming Payment document, the DocNumber generated in Incoming payment and the corresponding JE are same. Now
-
Cannot transcode in Oncore CS6
When I "send to Oncore" in Premiere CS6 the project transferrs but will nor Transcode. I've tried DVD Disk, BD disk, and both disk images. Nothing works. I have just edited an extensive project and need to get it published. I never had this happen wi