My iphone 3gs cannot connect to the server. i have full wifi and att full bars showing up. any ideas of how to fix this?
my phone has full wifi and full at&t bars. it will not connect to server/network. i just updated it to the new ios6 software and it still cannot connect. any thoughts on how to fix?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]
Similar Messages
-
When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.
By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ -
I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables. There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?
Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad. -
My iphone 5 cannot connect to the server. HELP!
My iphone 5 cannot connect to the server and my on/off button does not work
Welcome to the Apple community Linda.
Have you tried deleting the account! restarting the device and trying again. -
I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?
Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari -
Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?
Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
Item 24 lists 3 installable major search engines for Australia.
You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney. -
My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this problem?
On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer -
I downloaded ios6 on iphone 4s & now cannot call out or receive calls. Any ideas on how to fix this?
What if you repair your phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
My iphone (ios 7.1) is not showing the apple tv icon from my pull up control center? They are both running on the same wifi network... Any ideas on how to fix this problem?
Was it working before? Is your Apple TV enabled for airplay?
See
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US -
selected from my iphone "Buy more ringtones"and it has dowloaded as a music file and is now in itunes on my laptop and in music on my iphone. How do i get it to be a ring tone which is what should have happened in the first place. Any ideas on how to fix this? As in itunes I cannot see how to a) change it to a ring or b) drag across to the right area...
I simply followed the prompts on my iphone 4s and would have expected it to end up as a ring tone.. any help, guidance, advice welcome...selected from my iphone "Buy more ringtones"and it has dowloaded as a music file and is now in itunes on my laptop and in music on my iphone. How do i get it to be a ring tone which is what should have happened in the first place. Any ideas on how to fix this? As in itunes I cannot see how to a) change it to a ring or b) drag across to the right area...
I simply followed the prompts on my iphone 4s and would have expected it to end up as a ring tone.. any help, guidance, advice welcome... -
Iphone 4 microphone works partly unreliable. Any ideas on how to fix this issue?
People calling me cannot hear me talk - then it gets resolved and then it happens again. Very unreliable.
How can I fix this? Have not dropped phone or wet it. This has been happening off and on a few days now and is very very fustrating. Any help on how to fix this? I was on a thread but signing in kicked me out of it.Hi nicolep89,
If you are having multiple non-specific issues with your iPhone after a recent update, your best course of action may be to back up any of your content to iTunes, restore the phone to factory settings, then test to see if the issues persist in its default config before bringing back your content from the backup. You may find the following articles helpful:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Apple Support: Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Regards,
- Brenden -
my ipod touch 4th generation, is stuck on the apple turn-on screen where you turn it on, but all you see is the apple. Any ideas on how to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?
My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?
http://support.apple.com/kb/ts1538
-
I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help
Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac
Maybe you are looking for
-
I am wondering if i purchase Apple TV if it broadcasts the Ipad throught all apps. Example: I am using a human body app from the app store and would like to broadcast it while in a court room onto a tv (wirelessly). Ive seen that you can open up airp
-
Locks During Object Collection & Activation in Business content in NRIV
Hi, During the Collection & activation of InfoObjects (Business Content) the systems get locked. looks like a dead lock in DB01 with table NRIV We are on MSSQL 2005 SP3 Does anyone encountered this..??? All of the OSS notes i found talks about t
-
I have a bookmarked a reputable company for easy access. Log-in icon, easy and secure, no problems. Weeks ago, I entered a wrong password, and a page stating "error" appeared. log-in was successful when reset and again, secure, and safe. Now this pag
-
Pulse modulated CW with PXI-5650 and PXI-6653
Hello, I am trying to generate a pulse modulated CW signal with the PXI-5650 as the RF source and the PXI-6653 as the modulating signal. Basically I am trying to generate a simple radar waveform. It seems like this would be possible to use the Timing
-
Message- Not enough RAM to open Classic
For many months we have successfully opened Classic (set for auto open on booting OSX 10.4.7). Suddenly we get an message asking if we want to continue opening Classic with insufficient RAM (needs at least 128 megs). But we have 768 megs of installed