My iphone blacks out when i switch on Edge/ 3 g.any remedy?

My I phone 3 GS has been upgraded to latest IOS6. Now when ever I switch on Edge/3 G services the phone blacks out. Why? Any remedy to this?

Have you contacted your carrier to ensure cellular data is provisioned properly for your account and iPhone?

Similar Messages

G580- Screen blacks out when power supply is not plugged in to the laptop

My laptop is just 3 months old and I am already having problems with it.
The laptop screen blacks out when i remove the power supply from it.
When plugged in , it starts workin again.
Whats the point of a laptop if i am not able to use it without plugging in??
I don kno what the probelm is. Can anyone help here pls...
Cheers
Vaish

Hi Vaish,
I’d like to help you with this issue as we can try to increase the Brightness of the screen from the power options while plugged in,
And then please if still the same we can try to uninstall the Lenovo Energy management and reinstall it back:
Lenovo Energy Management for Microsoft Windows 8
Lenovo Energy Management for Microsoft Windows 7
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Iphone went out, when i did get it back on up in the top left of screen it continues to show searching, and wi-fi is grayed out keeping me from restoring it. what can i do to fix this?

Iphone went out, when i did get it back on, up in the top left of screen it continues to show searching, and wi-fi is grayed out keeping me from restoring it. what can i do to fix this?

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can clear some glitches.
If this does not work, try to set it up as new device without using the latest backup.
How to back up your data and set up as a new device

Screen doesnt get blacked out when on call after the new update

Since the time i Have updated the firmware screen doesnt gets blacked out, when on call after the new update. Because of this option automatically get selected by getting touched cheecks.
any solution?

Please try to update your plugins [http://www.mozilla.org/en-US/plugincheck/] Flash is out of date.
Also the Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Photoshop 5: blacking out when I use certain tools

I have Photoshop 5. Everything is up to date.
Most of the time when I use the crop tool or patch tool, it will black out when I am circling what I want to change or crop. I can't see what I'm cropping, I just have guess, and the same thing with my crop tool. It's been happening for a very long time. Almost since I first purchased it.

Do you really mean the ancient, obsolete Photoshop 5? Or did you mean Photoshop CS5 a.k.a. Photoshop 12.x?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My ipod touch 'blacks out ' when loading apps. I have tried resetting it and re-downloading the apps but with no success.

My ipod touch 'blacks out ' when loading apps and then goes straight back out to the screen. I have tried resetting it and also re-downloading the apps but with no success. All software is up to date.

Did you try download/installing a new app?
Then try:
iOS: Troubleshooting applications purchased from the App Store

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

Try:
ipod touch wont remember wifi password: Apple Support Communities
Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Monitor blacks out when booting with KVM Switch in the middle

Hi
I have attached my Xserve with an iMac G5 to a KVM Switch. When I boot up the Xserve the monitor blacks out after the apple logo.
I know that the Xserve tries to autodetect the monitor. Apparently it fails in its job when the KVM is in the middle. Everything works well when I remove the KVM and connect the monitor directly to Xserve.
Any ideas how do I disable the monitor autodetect feature - or something?
Xserve (intel) Mac OS X (10.4.1) dkvm-4u KVM switch

Hi all
I did try that. No luck.. Strangely enough, I realized that when the server boots up, the login screen defaults to 85HZ refresh rate. I found a site that explains the plist file that you can change to force it to 60HZ. What is weird it if I boot the Mac connected to another LCD, then move the cable to the KVM, it works. It almost seems like when the mac is booting, it sends some sort of signal just before the login screen comes up, that screws up this KVM. Tried updating firmware, still in the process of speaking with the KVM support people...
very strange..
Enio

IPhone blacking out to home screen

iPhone randomly blacks out to the home screen. It does this during anything I'm doing; apps, texts, internet, phone calls, etc. I lose anything I've typed and have to retype or redo anything i was previously doing. I've tried to reset it, update it, and everything else.. nothing has worked. I have also replaced it. I'm not on my third iphone. They start out working fine when I first get them but then they all start doing this. Please help

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Reset, restore, Service.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414

Iphone Blacking out and needing to be reset

My phone has been playing up for months, it will black out as if i have turned it off but havent. i then have to reset the phone this can happen up to 5 times a day if not more but sometime less. i can also plug it into power and this will bring the screen back on. when this happens it often takes a picture of the screen. i have restored the phone many times and also took it back to the shop and they sent it back saying nothing was wrong with it. but the problem is still happening it is quite annoying and just recently the music has been playing up, it will just stop especially if i have it play threw an ipod dock speaker thing. i have been trying to restore it again to maybe fix the problem but when i click retore it goes to do it but then brings the update to upload but i have the latest update. should i just take it back again? or could it be something else? does anyone else have this problem? any help would be great =)

I have had a similar issue and found out that it is simple fix (was for me). On the iPhone there are proximity sensors to the left of ear mike (where you listen) it senses if your ear is close to the phone and blacks the screen out so you don't activate any other buttons when putting the phone to your ear..... the leather case or protective sleeve that I was using, was covering those sensors and thus stopping the screen from coming back on. The problem seemed intermittent, then permanent... once I removed the case, it became an instant fix. You cant see exactly where the sensors are unless you tilt the phone and look at it at an angle in natural light (the sunlight) you'll see two "dots" under the screen close to the ear piece.... try using the phone without case?

S200 screen blacks out when lid opened; lid closed it turns on!

This is badder than bad for a problem. When I open the netbook lid, the screen blanks out. This even happens at the boot stage immediately after pressing power button, so that the BIOS screen goes black when I open the lid. On closing the lid though, hey, the screen turns on. If it manages to boot the OS and I open the lid, the screen will black out. Then I close it and it turns on, but often opening it again and the netbook sleeps. A while ago, after that stage of the netbook sleeping, I could open the lid, hit Enter and get it to wake up and then I had roughly 1.5 min to do some work - perhaps longer I didn't actually time it. Now, however, it blacks out again after wake up (and its very hard to shut it down using a pencil reaching the power button!) I've opened the back off the netbook and try to find the lid switch, but I'm still not sure where it is - so that I could disable it completely. I'd prefer not to take it to the service center as warranty is over and I already had a $50 repair with Lenovo, so doing it once more is not really worth it. OS is Linux Ubuntu - and in all the Power settings I set it to do nothing when lid is closed. Any help would be appreciated!

Well, I had the idea of using a magnet to find out if the S200 uses a magnetic lid switch.
I ran it around the edges of lid and outside of keyboard and front... and suddenly, just by the Backspace key it was, the screen came back to life!
As i had the case opened I looked at what part was inside just there, and its the small usb/card-reader board. I couldn't tell if there was a lid switch component there though - but after I touched a few parts there, now the screen is always on when i start the netbook.
my other problem now though is that half of the keys don't work - no output on screen.
so that's another issue!

I have a problem with FF 4.0b8 and Adobe Flash player where portions of the YouTube page or FF window will black out when I move my curser over buttons or tabs, etc. Any suggestions?

I'm running FF 4 Beta 8 with the latest Flash player (10.1.102.64). When I play YouTube videos, the video is loaded, starts, and plays okay, but when I move my cursor around within the Firefox window, portions of the window black out under where the cursor travels. FF tabs and buttons will black out, or parts of the YouTube page (but not the video). CTL-ALT-Del to bring up Windows Security Panel, then CANCEL will restore the Firefox window, plus the YouTube page correctly (ie black is gone and window has been redrawn correctly). I can open up new tabs and replicate the problem multiple times. I've also experienced this problem with embedded YouTube videos (though it's easiest to replicate the problem direct from the YouTube page.) I don't experience this problem at all with FF 4 Beta 8 in Safe Mode, nor the latest FF 3.x.x. I have tried uninstalling and re-installing the Flash plug-in. Anyone have any ideas?

Problem involving videos played from the YouTube site is much less noticeable after upgrading from FF 4.0b8 to 4.0b9, but still occurs with embedded YouTube videos, where blacking out of other portions of the window still happens.

Z2 screen does not totally black out when not in use

Hi, I noted after upgrading to lollipop os, that my screen does not totally off ( still some dim light is emitted from the screen) even when I have set the phone to time out the screen to after 5 mins is inactivity. Why is that so and what can I do to make it black out totally when screen is time out?
Appreciate all your advices.

Hi hesper
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Since this has occurred after the update what I suggest is running a Software Repair on your handset as it is very likely to fix the problem.
Download the PC Companion software and install it on your PC.
Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
Please ensure your phone is powered off and not connected to the PC when you begin this process. You are not required to connect the phone until after step 10.
1. Install and open PC Companion then select Support Zone.
2. Phone Software Update.
3. Start.
4. Repair Phone
5. Continue
6. Accept data removal
7. Next
8. Wait for prepare
9. Select Phone
10. Follow the connection steps
NOTE: The software repair will delete all user data
To back up your phone using PC Companion:
1. Go to Support to install PC Companion on a Windows computer.
2. When installed, start PC Companion on the computer.
3. Connect your phone to the computer using a USB cable.
4. Click Start under Backup & Restore.
5. Follow the on-screen instructions.
Hope this helps! Keep us updated
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Black out when screen is moved

My screen blacks out at times when I move the screen tipping forward and back. There is only a few positions where it will stay on. It's a 2008 black macbook running 10.7.5 and 10.6.8 Everything else is fine. Hardware test shows no problems. Any idea what kind of a repair this would be.
Thanks for any repley
Paul

The symptom is classic of a broken inverter cable. The cable routes through the left hinge to the screen and wears out from opening and closing the screen. It's a difficult repair but following the guide at iFixIt if you have the courage and patience you can do it yourself https://www.ifixit.com/Guide/MacBook+Core+2+Duo+Inverter+Cable+Replacement/4772

My picture blacks out when adding text or selecting an area.

When I try to add text the picture blacks out. I can't see anything and have to type blind. When I am done, everything comes back and the words are there, but every time I click in the word box to change anything the picture will black out.
I also have a problem when doing a large selection area - as I outline the item I want to select the picture will blink in and out.
Thank you for any help you cna provide

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Please read these (in particular "Supply pertinent information for quicker answers"):
Best practices: Usage | Adobe Community
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

My iphone blacks out when i switch on Edge/ 3 g.any remedy?

Similar Messages

Maybe you are looking for